Original commit message from CVS:
* ext/dvdread/dvdreadsrc.c: (gst_dvd_read_src_read),
(gst_dvd_read_src_create), (gst_dvd_read_src_handle_seek_event):
Allow and implement non-flushing and/or segment seek
(mainly in TIME and chapter format).
* gst/mpegstream/gstdvddemux.c: (gst_dvd_demux_process_event),
(gst_dvd_demux_get_subpicture_stream),
(gst_dvd_demux_synchronise_pads),
(gst_dvd_demux_sync_stream_to_time):
* gst/mpegstream/gstmpegdemux.c: (gst_mpeg_demux_process_event),
(gst_mpeg_demux_send_subbuffer),
(gst_mpeg_demux_sync_stream_to_time),
(gst_mpeg_streams_reset_cur_ts):
* gst/mpegstream/gstmpegdemux.h:
* gst/mpegstream/gstmpegparse.c: (gst_mpeg_parse_process_event),
(gst_mpeg_parse_pad_added), (gst_mpeg_parse_handle_src_query):
Delegate a query to upstream if it can't be handled.
Make segment stop aware.
Fix (subtitle) stream synchronization.
Add some debug statements.
Original commit message from CVS:
* gst/mpegstream/gstmpegparse.c: (gst_mpeg_parse_process_event),
(gst_mpeg_parse_send_event):
Post an error message if EOS wasn't handled by anything downstream.
This should fix playbin freezing/hanging with small VobSub subtitle
files (background: not-linked flow returns from downstream are
ignored for a while at the beginning, so if the file is small
upstream will never get a not-linked flow return even if nothing
is connected downstream). (#429960).
Original commit message from CVS:
* gst/mpegstream/gstmpegparse.c: (gst_mpeg_parse_parse_packhead):
Use our alignment-safe macros here too, since we can't assume that
GST_BUFFER_DATA is aligned (these are subbuffers we're dealing with
here).
Original commit message from CVS:
* gst/mpegstream/gstmpegparse.c: Use the GST_READ macro I meant
to in the previous checkin. see #385192. You can have your
cheese back now.
Original commit message from CVS:
* gst/mpegstream/gstmpegparse.c: Fix unaligned load that loads
from the dereferenced integer, not the pointer itself. Fixes
#385192.
I'm takin ur cheese!
Original commit message from CVS:
* gst/mpegstream/gstdvddemux.c: (gst_dvd_demux_base_init),
(gst_dvd_demux_class_init), (gst_dvd_demux_combine_flows),
(gst_dvd_demux_send_subbuffer):
* gst/mpegstream/gstmpegdemux.c: (gst_mpeg_demux_class_init),
(gst_mpeg_demux_init_stream), (gst_mpeg_demux_parse_packet),
(gst_mpeg_demux_parse_pes), (gst_mpeg_demux_combine_flows),
(gst_mpeg_demux_send_subbuffer):
* gst/mpegstream/gstmpegdemux.h:
* gst/mpegstream/gstmpegparse.c: (gst_mpeg_parse_process_event),
(gst_mpeg_parse_chain):
Fix flow value combination; this fixes playbin/totem locking up if
a VobSub file is specified as subtitle file (#334322). Flow value
combination should only happen once we are fairly sure we've got all
pads that are available for now. Since there isn't a well-specified
time when this is the case in MPEG, we'll just assume this is the
case once there has been a certain number of packets for each
stream we've found so far.
Original commit message from CVS:
Patch by: Josep Torra Valles <josep at fluendo com>
* gst/iec958/ac3_padder.c: (ac3p_init):
* gst/mpegstream/gstmpegparse.c:
* gst/realmedia/rmdemux.c: (gst_rmdemux_parse__rmf),
(gst_rmdemux_parse_prop), (gst_rmdemux_parse_mdpr),
(gst_rmdemux_parse_indx), (gst_rmdemux_parse_indx_data),
(gst_rmdemux_parse_data), (gst_rmdemux_parse_cont),
(gst_rmdemux_parse_packet):
Misc. fixes for problems discovered by Forte (different return types
in function declaration and definition, pointer arithmetics with
void pointers). Fixes#362639.
Original commit message from CVS:
* gst/mpegstream/gstmpegparse.c: (gst_mpeg_parse_handle_src_query):
Reflow code so that compiler doesn't complain about possible use
of uninitialised variable any longer; but just in case, initialise
it anyway; also take object ref in query function and do peer pad
stuff in a more thread-safe way.
Original commit message from CVS:
* gst/mpegstream/gstmpegpacketize.c:
(gst_mpeg_packetize_flush_cache), (gst_mpeg_packetize_put):
* gst/mpegstream/gstmpegparse.c: (gst_mpeg_parse_chain):
Also flush packetizer cache when we get a buffer that has the
DISCONT flag set; update current byte position from buffer
offset after a flush.
Original commit message from CVS:
* gst/mpegstream/gstmpegpacketize.c: (gst_mpeg_packetize_new),
(gst_mpeg_packetize_flush_cache), (gst_mpeg_packetize_destroy),
(gst_mpeg_packetize_read):
* gst/mpegstream/gstmpegpacketize.h:
* gst/mpegstream/gstmpegparse.c: (gst_mpeg_parse_process_event),
(gst_mpeg_parse_change_state):
Flush packetizer cache when we get a FLUSH_STOP event;
remove unused source pad member from packetizer; add debug
category for packetizer.
Original commit message from CVS:
* gst/mpegstream/gstmpegpacketize.c: (gst_mpeg_packetize_put),
(read_cache):
* gst/mpegstream/gstmpegpacketize.h:
g_malloc() can't fail, we don't need to handle this. Same for
gst_buffer_new_and_alloc().
* gst/mpegstream/gstmpegparse.c: (gst_mpeg_parse_chain):
klass->send_buffer() should have the same semantics as
gst_pad_push(), ie. ownership of the buffer is transfered,
so we never have to unref the buffer no matter what the flow
return value was.
Original commit message from CVS:
* ext/mad/gstmad.c: (index_seek):
move GstIndexEntry *entry variable declaration before
the first instruction
* ext/mad/gstmad.c:
remove debug macros with variable number of parameter by using
GST_DEBUG for WIN32
* gst/dvdsub/gstdvdsubdec.c: (gst_dvd_sub_dec_parse_subpic):
use gst_guint64_to_gdouble for conversions
* gst/mpegstream/gstmpegdemux.c: (gst_mpeg_demux_sync_stream_to_time):
replace __FUNCTION__ which is not supported by MSVC by the current function name
* gst/mpegstream/gstmpegdemux.c: (gst_mpeg_demux_reset):
remove LL suffix by using G_GINT64_CONSTANT
* gst/mpegstream/gstmpegparse.c: (gst_mpeg_parse_parse_packhead),(gst_mpeg_parse_get_rate):
use gst_guint64_to_gdouble for conversions
* gst/mpegstream/gstmpegparse.h:
remove LL suffix by using G_GINT64_CONSTANT
* win32/vs6:
add project files for tagac3parse, asfdemux, dvdlpcmdec, dvdsub, iec958, lame,
mad, mpegaudioparse, mpegstream, realmedia, synaesthesia
Original commit message from CVS:
* gst/mpegstream/gstmpegparse.c: (gst_mpeg_parse_handle_src_event):
Don't unref event unconditionally after giving away ownership
(gst_pad_push_event(), gst_pad_send_event() and
gst_pad_event_default() take ownership of the event
passed to them). Fixes warnings/crashes caused by
navigation events.
Original commit message from CVS:
Patch by: Michal Benes <michal dot benes at xeris dot cz>
* gst/mpegstream/gstmpegdemux.c: (gst_mpeg_demux_init),
(gst_mpeg_demux_parse_packet), (gst_mpeg_demux_parse_pes),
(gst_mpeg_demux_send_subbuffer), (gst_mpeg_demux_reset):
* gst/mpegstream/gstmpegdemux.h:
* gst/mpegstream/gstmpegparse.c: (gst_mpeg_parse_parse_packhead):
Timestamps in mpeg stream are 32-bit numbers. Therefore, with a
clock_freq of 90kHz this timestamp overflows every ~13 hours. This
situation really happens when grabbing DVB streams. Current
mpegdemuxer can not handle this situation correctly and it
restarts counting gstreamer timestamps from zero.
Fixes#326598.
Original commit message from CVS:
* gst/mpegstream/gstmpegparse.c: (gst_mpeg_parse_pad_added),
(gst_mpeg_parse_handle_src_query):
Declare variables at the beginning of a block and make
gcc-2.9x happy (fixes#328957; patch by: Jens Granseuer).
Original commit message from CVS:
* gst/mpegstream/gstmpegparse.c: (gst_mpeg_parse_send_buffer):
If we haven't set caps on a source pad yet, the caps on the
pad are NULL, not un-fixed. Set caps on outgoing buffers.
Original commit message from CVS:
2006-01-22 Martin Soto <martinsoto@users.sourceforge.net>
* gst/mpegstream/gstmpegparse.c (gst_mpeg_parse_process_event):
Erase spurious call to gst_segment_set_newsegment.
* gst/mpegstream/gstdvddemux.c (gst_dvd_demux_process_event): Call
the superclass method when handling NEWSEGMENT events.
(gst_dvd_demux_handle_dvd_event): Get rid of dvd-audio-shutdown
and dvd-audio-restart event handling. There are currently less
hackish ways of handling the sparse audio stream problem.
Original commit message from CVS:
2006-01-19 Martin Soto <martinsoto@users.sourceforge.net>
* gst/mpegstream/gstmpegparse.h (struct _GstMPEGParse):
* gst/mpegstream/gstmpegparse.c (gst_mpeg_parse_reset)
(gst_mpeg_parse_process_event, gst_mpeg_parse_parse_packhead)
(gst_mpeg_parse_change_state):
Make timestamp adjustment somewhat milder. Actual timestamps are
now sent unmodified unless an actual gap is found in the
stream. This should fix time display when playing most MPEG
files.
Original commit message from CVS:
* ext/amrnb/amrnbparse.c: (gst_amrnbparse_query):
* ext/mad/gstid3tag.c: (gst_id3_tag_src_query):
* ext/mad/gstmad.c: (gst_mad_src_query):
* ext/mpeg2dec/gstmpeg2dec.c: (gst_mpeg2dec_src_query):
* ext/sidplay/gstsiddec.cc:
* gst/mpegstream/gstmpegparse.c: (gst_mpeg_parse_handle_src_query):
* gst/realmedia/rmdemux.c: (gst_rmdemux_src_query):
Pass unhandled queries upstream (useful e.g. for SEEKING query)
(fixes#325652; based on patch by: Philippe); make rmdemux return
FALSE for position queries, instead of setting -1 as value and
returning TRUE.
Original commit message from CVS:
2006-01-05 Martin Soto <martinsoto@users.sourceforge.net>
* gst/mpegstream/gstmpegparse.c (gst_mpeg_parse_adjust_ts)
(gst_mpeg_parse_process_event, gst_mpeg_parse_pad_added): Don't
rewrite timestamps in the case segments are being set from
upstream, but use timestamps unmodified. Also send proper position
values. This allows for correct time display and makes queries
work in sink elements.
* gst/mpegstream/gstdvddemux.h:
* gst/mpegstream/gstdvddemux.c (gst_dvd_demux_init)
(gst_dvd_demux_handle_dvd_event, gst_dvd_demux_send_subbuffer):
Rename flush_filter to segment_filter, which is better represents
what the arreibute does.
* gst/mpegstream/gstdvddemux.c (gst_dvd_demux_process_event):
Activate segment filtering when a timestamp discontinuity is seen.
Original commit message from CVS:
2005-12-31 Martin Soto <martinsoto@users.sourceforge.net>
* gst/mpegstream/gstdvddemux.c (gst_dvd_demux_handle_dvd_event):
Use the new "audio-shutdown" and "audio-restart" DVD events
instead of the "spu-still-frame" event to shutdown and restart
the audio pipeline.
* gst/mpegstream/gstmpegparse.c (gst_mpeg_parse_adjust_ts):
Check for cases where the segment-based adjustment calculation
would produce negative values (which result in an overflow) and
return GST_CLOCK_TIME_NONE instead.
* gst/mpegstream/gstdvddemux.h:
* gst/mpegstream/gstdvddemux.c (gst_dvd_demux_init)
(gst_dvd_demux_process_event, gst_dvd_demux_send_subbuffer):
Add a mechanism to discard audio buffers with timestamps outside
the currently set segment. This was causing (sometimes serious)
synchronization problems after seeking in DVDs with LPCM audio,
since VOBUs usually contain audio material that lies outside the
timestamp range specified by the header.
Original commit message from CVS:
2005-12-19 Martin Soto <martinsoto@users.sourceforge.net>
Big mpegparse clean up, second round:
* gst/mpegstream/gstdvddemux.c (gst_dvd_demux_handle_dvd_event):
Send and EOS event down the audio pipeline when an still frame
event arrives. This prevents the pipeline from locking when a
still menu comes directly after a flush.
* gst/mpegstream/gstmpegparse.c (gst_mpeg_parse_reset):
Don't send a newsegment in reset.
(gst_mpeg_parse_adjust_ts): Check for invalid timestamps.
(gst_mpeg_parse_handle_newsegment, gst_mpeg_parse_process_event):
Move the code of handle_newsegment to process_event. Send a
NEWSEGMENT after FLUSH_STOP.
(gst_mpeg_parse_change_state): Send a NEWSEGMENT right after
moving to PAUSED.
* gst/mpegstream/gstmpegdemux.c (gst_mpeg_demux_send_event)
(gst_mpeg_demux_class_init): Don't override send_event.
* gst/mpegstream/gstmpegdemux.c (gst_mpeg_demux_init)
(gst_mpeg_demux_send_event, gst_mpeg_demux_send_subbuffer)
(gst_mpeg_demux_reset):
* gst/mpegstream/gstmpegdemux.h: Get rid of just_flushed
attribute.
* gst/mpegstream/gstmpegparse.c (gst_mpeg_parse_process_event):
Reset the mpegparse element after a flush.
* gst/mpegstream/gstmpegparse.c (gst_mpeg_parse_handle_newsegment):
Don't forward events.
* gst/mpegstream/gstmpegparse.c (gst_mpeg_parse_process_event):
* gst/mpegstream/gstmpegparse.h (struct _GstMPEGParseClass):
handle_newsegment is not a virtual method anymore.
* gst/mpegstream/gstmpegparse.c (gst_mpeg_parse_send_newsegment)
(gst_mpeg_parse_reset, gst_mpeg_parse_class_init):
* gst/mpegstream/gstmpegparse.h (struct _GstMPEGParseClass): Get
rid of send_newsegment virtual method.
* gst/mpegstream/gstdvddemux.c (gst_dvd_demux_process_event): Only
handle DVD events and call the superclass method for other event
types.
* gst/mpegstream/gstmpegdemux.c (gst_mpeg_demux_send_event): Don't
override process_event anymore.
* gst/mpegstream/gstmpegparse.c (gst_mpeg_parse_event)
(gst_mpeg_parse_process_event): Move actual event processing to
process event so that subclasses can properly override or extend
it.
* gst/mpegstream/gstmpegparse.h (struct _GstMPEGParseClass):
Eliminate time parameter in process event.
* gst/mpegstream/gstmpegdemux.c (gst_mpeg_demux_init)
(gst_mpeg_demux_parse_packet, gst_mpeg_demux_parse_pes)
(gst_mpeg_demux_send_subbuffer):
* gst/mpegstream/gstmpegparse.c (gst_mpeg_parse_class_init)
(gst_mpeg_parse_parse_packhead, gst_mpeg_parse_event)
(gst_mpeg_parse_chain): Use the new adjust_ts method instead of
adding the value of the adjust attribute.
* gst/mpegstream/gstmpegdemux.h (struct _GstMPEGVideoStream): Get
rid of the adjust attribute. Now all timestamp adjustments are
performed by mpegparse using the current segment.
* gst/mpegstream/gstmpegparse.c (gst_mpeg_parse_adjust_ts)
(gst_mpeg_parse_class_init): Implement the adjust_ts method based
on the adjust attribute for SCR values and the current segment.
* gst/mpegstream/gstmpegparse.h (struct _GstMPEGParseClass): New
adjust_ts virtual method to adjust timestamps for outgoing
buffers.
* gst/mpegstream/gstmpegdemux.c (gst_mpeg_demux_send_newsegment)
(gst_mpeg_demux_parse_packet): Don't override send_newsegment.
* gst/mpegstream/gstdvddemux.c (gst_dvd_demux_class_init)
(gst_dvd_demux_handle_newsegment): Don't override
handle_newsegment.
(gst_dvd_demux_process_event, gst_dvd_demux_handle_dvd_event):
Check for DVD events in process_event instead of
handle_dvd_event.
* gst/mpegstream/gstmpegparse.h (struct _GstMPEGParseClass):
* gst/mpegstream/gstmpegparse.c (gst_mpeg_parse_handle_newsegment)
(gst_mpeg_parse_send_newsegment, gst_mpeg_parse_send_event):
* gst/mpegstream/gstmpegdemux.c (gst_mpeg_demux_process_event)
(gst_mpeg_demux_send_event):
* gst/mpegstream/gstdvddemux.c (gst_dvd_demux_process_event)
(gst_dvd_demux_handle_dvd_event):
Eliminate the time parameter in send_event.
Original commit message from CVS:
2005-12-08 Martin Soto <martinsoto@users.sourceforge.net>
* gst/mpegstream/gstdvddemux.c (gst_dvd_demux_handle_newsegment):
Properly handle non contiguous VOBUs by adding the segment accum
field to the adjust value.
* gst/mpegstream/gstdvddemux.c (gst_dvd_demux_class_init)
(gst_dvd_demux_init, gst_dvd_demux_handle_newsegment): Extend
handle_newsegment to prevent sending actual newsegment events and
use tiemstamp rewriting instead.
(gst_dvd_demux_handle_dvd_event): Don't send a newsegment after
dvd-lang-codes.
* gst/mpegstream/gstmpegparse.c (gst_mpeg_parse_handle_newsegment)
(gst_mpeg_parse_event):
* gst/mpegstream/gstmpegparse.h (struct _GstMPEGParseClass):
Add a new parameter to handle_newsegment to allow controlling
whether newsegment events are forwarded or not.
* gst/mpegstream/gstdvddemux.c (gst_dvd_demux_init)
(gst_dvd_demux_handle_dvd_event, gst_dvd_demux_send_subbuffer)
(gst_dvd_demux_reset):
last_end_ptm and discont_time aren't necessary anymore, since
timestamp adjustment is now replaced by newsegment events.
(gst_dvd_demux_init): Prevent MPEGParse from adjusting
timestamps.
* gst/mpegstream/gstdvddemux.h:
* gst/mpegstream/gstdvddemux.c (gst_dvd_demux_handle_dvd_event):
Don't handle dvd-nav-packet events anymore, since the are now
replaced by standard newsegment events.
* gst/mpegstream/gstdvddemux.c (gst_dvd_demux_init)
(gst_dvd_demux_handle_dvd_event, gst_dvd_demux_send_subbuffer)
(gst_dvd_demux_change_state):
* gst/mpegstream/gstdvddemux.h:
Get rid of the ignore_next_newmedia_discont hack.
* gst/mpegstream/gstdvddemux.c (gst_dvd_demux_class_init)
(gst_dvd_demux_handle_newsegment):
* gst/mpegstream/gstmpegdemux.c (gst_mpeg_demux_class_init)
(gst_mpeg_demux_handle_newsegment): Don't override
handle_newsegment anymore. It was only necessary to handle
NEWMEDIA events.
* gst/mpegstream/gstdvddemux.c (gst_dvd_demux_process_event)
(gst_dvd_demux_handle_dvd_event, gst_dvd_demux_set_cur_audio)
(gst_dvd_demux_set_cur_subpicture):
Reactivate handling of DVD events.
* gst/mpegstream/gstmpegparse.c (normal_seek)
(gst_mpeg_parse_handle_src_event)
(gst_mpeg_parse_handle_src_query):
First attempt at reenabling seek.
* gst/mpegstream/gstmpegparse.h:
* gst/mpegstream/gstmpegparse.c (gst_mpeg_parse_init)
(gst_mpeg_parse_update_streaminfo)
(gst_mpeg_parse_get_rate)
(gst_mpeg_parse_convert, gst_mpeg_parse_get_src_query_types)
(gst_mpeg_parse_handle_src_query):
* gst/mpegstream/gstmpegdemux.c (gst_mpeg_demux_new_output_pad):
Make queries work again.
* gst/mpegstream/gstmpegparse.c (gst_mpeg_parse_reset)
(gst_mpeg_parse_handle_newsegment)
(gst_mpeg_parse_send_newsegment, gst_mpeg_parse_pad_added)
(gst_mpeg_parse_chain, gst_mpeg_parse_handle_src_event):
* gst/mpegstream/gstmpegparse.h (struct _GstMPEGParse):
Get rid of the newsegment_pending attribute, and rely instead on
proper timestamp adjustment.
* gst/mpegstream/gstmpegparse.c
(gst_mpeg_parse_get_src_event_masks): Erase.
* gst/mpegstream/gstmpegparse.c (gst_mpeg_parse_init):
Initialize fields before creating pads to prevent the pad creation
callback from failing.
(gst_mpeg_parse_reset): Initialize new fields, and change
initialization order to match the order in the structure.
(gst_mpeg_parse_handle_newsegment): Forward new segment events
whenever possible, and update the current segment.
(gst_mpeg_parse_send_newsegment): Update the current segment and
pending_newsegment.
(gst_mpeg_parse_pad_added): Use the current segment to send
newsegment events to new pads.
(gst_mpeg_parse_chain): Properly add adjust time to sent buffers
and events. Properly update newsegment_pending.
* gst/mpegstream/gstmpegparse.h (struct _GstMPEGParse):
New fields do_adjust and current_segment.
* gst/mpegstream/gstmpegdemux.c:
* gst/mpegstream/gstdvddemux.c:
* gst/mpegstream/gstmpegparse.h:
Rename handle_discont virtual method to handle_newsegment. Erase
some (already commented out support) for old NEW_MEDIA events.
* gst/mpegstream/gstmpegparse.h (struct _GstMPEGParse):
* gst/mpegstream/gstmpegparse.c (gst_mpeg_parse_init)
(gst_mpeg_parse_reset, gst_mpeg_parse_handle_discont)
(gst_mpeg_parse_pad_added, gst_mpeg_parse_parse_packhead)
(gst_mpeg_parse_event, gst_mpeg_parse_chain):
Erase the "pending_scr" field, and replace it by a slightly
different handling of the current SCR. Document code blocks in
parse_packhead and chain.
Original commit message from CVS:
Reviewed by: Tim-Philipp Müller <tim at centricular dot net>
* gst/mpegstream/gstmpegdemux.c: (gst_mpeg_demux_send_event):
* gst/mpegstream/gstmpegparse.c: (gst_mpeg_parse_send_newsegment),
(gst_mpeg_parse_send_event):
Ref events before sending them to multiple pads, after all
gst_pad_send_event() takes ownership of events. Don't leak
events that have not been handled (fixes#322745).
Original commit message from CVS:
2005-11-28 Martin Soto <martinsoto@users.sourceforge.net>
* gst/mpegstream/gstdvddemux.c (gst_dvd_demux_handle_dvd_event)
(gst_dvd_demux_handle_dvd_event): Erase code to prevent mpegparse
from making timestamp adjustments. This will have to be re-added
in some form in the near future, but in order to do that, some nav
packet parsing will be necessary in mpegdemux.
* gst/mpegstream/gstmpegparse.h (struct _GstMPEGParse):
* gst/mpegstream/gstmpegparse.c (gst_mpeg_parse_init)
(g_value_set_int, gst_mpeg_parse_set_property)
Get rid of do_adjust and use_adjust. Rename max_discont to
max_src_gap.
(gst_mpeg_parse_parse_packhead): When max_scr_gap has a value of
-1, no adjustment is made.
* gst/mpegstream/gstmpegparse.c (gst_mpeg_parse_class_init):
Rename max_discont property to max_scr_gap. Erase "adjust"
property.
* gst/mpegstream/gstdvddemux.c (gst_dvd_demux_send_event): Don't
override send_event anymore, base class does the job.
* gst/mpegstream/gstmpegdemux.c (gst_mpeg_demux_send_event):
Base class now does most of the work.
* gst/mpegstream/gstmpegparse.c (gst_mpeg_parse_send_event):
Generalize to forwarding the event to all source pads in the
element.
* gst/mpegstream/gstmpegparse.h:
* gst/mpegstream/gstmpegparse.c (gst_mpeg_parse_class_init)
(gst_mpeg_parse_init, gst_mpeg_parse_set_clock)
(gst_mpeg_parse_chain, gst_mpeg_parse_get_property)
(gst_mpeg_parse_set_property):
Clock synchronization doesn't make sense anymore for a
demultiplexer.
Original commit message from CVS:
* ext/mad/gstmad.c: (gst_mad_chain):
Proper warning statements,
Don't error if the src pad isn't linked when pushing.
* gst/mpegstream/gstmpegparse.c: (gst_mpeg_parse_change_state):
Proper state_change, avoids borkage when going to READY
Original commit message from CVS:
2005-11-23 Martin Soto <martinsoto@users.sourceforge.net>
* gst/mpegstream/gstmpegparse.c (gst_mpeg_parse_class_init)
(gst_mpeg_parse_handle_discont, gst_mpeg_parse_send_newsegment)
(gst_mpeg_parse_chain):
* gst/mpegstream/gstmpegdemux.c (gst_mpeg_demux_class_init)
(gst_mpeg_demux_send_newsegment):
* gst/mpegstream/gstdvddemux.c (gst_dvd_demux_send_subbuffer):
* gst/mpegstream/gstmpegparse.h:
Rename send_discont method to send_newsegment and add parameters
to handle actual segments. Adapt code all around to run with the
new name and signature.
* gst/mpegstream/gstmpegdemux.c:
* gst/mpegstream/gstmpegparse.c:
* gst/mpegstream/gstdvddemux.c:
Convert to GST_BOILERPLATE.
Original commit message from CVS:
* ext/mpeg2dec/gstmpeg2dec.c: (handle_slice),
(gst_mpeg2dec_sink_event):
Set DELTA_UNIT flag on outgoing buffers if this is NOT a keyframe;
nice-ify debug message in event handler; add CHECKME.
* gst/mpegstream/gstdvddemux.c: (gst_dvd_demux_process_event),
(gst_dvd_demux_send_event), (gst_dvd_demux_process_private),
(gst_dvd_demux_send_subbuffer), (gst_dvd_demux_reset),
(gst_dvd_demux_sync_stream_to_time):
* gst/mpegstream/gstmpegdemux.c: (gst_mpeg_demux_class_init),
(gst_mpeg_demux_process_event), (gst_mpeg_demux_send_event),
(gst_mpeg_demux_handle_discont), (gst_mpeg_demux_new_output_pad),
(gst_mpeg_demux_parse_packet), (gst_mpeg_demux_parse_pes),
(gst_mpeg_demux_send_subbuffer), (gst_mpeg_demux_process_private),
(gst_mpeg_demux_sync_stream_to_time),
(gst_mpeg_demux_handle_src_event), (gst_mpeg_demux_reset):
* gst/mpegstream/gstmpegdemux.h:
* gst/mpegstream/gstmpegparse.c: (gst_mpeg_parse_init),
(gst_mpeg_parse_handle_discont), (gst_mpeg_parse_send_buffer),
(gst_mpeg_parse_process_event), (gst_mpeg_parse_send_discont),
(gst_mpeg_parse_send_event), (gst_mpeg_parse_event),
(gst_mpeg_parse_chain):
* gst/mpegstream/gstmpegparse.h:
Get rid of GST_PAD_IS_USABLE and fix GstFlowReturn vs. gboolean
return value confusion (gst_pad_push vs. gst_pad_send_event and
gst_pad_push_event); pass flow return values to caller;
miscellaneous fixes and clean-ups.
Original commit message from CVS:
* ext/mpeg2dec/gstmpeg2dec.c:
Don't send things to NULL PAD_PEERs
* gst/deinterlace/gstdeinterlace.c: (gst_deinterlace_chain):
Copy-on-write the incoming buffer.
* gst/mpegstream/gstdvddemux.h:
* gst/mpegstream/gstmpegclock.h:
* gst/mpegstream/gstmpegdemux.c: (gst_mpeg_demux_parse_syshead),
(normal_seek), (gst_mpeg_demux_handle_src_event):
* gst/mpegstream/gstmpegdemux.h:
* gst/mpegstream/gstmpegpacketize.h:
* gst/mpegstream/gstmpegparse.c:
(gst_mpeg_parse_update_streaminfo), (gst_mpeg_parse_reset),
(gst_mpeg_parse_handle_discont), (gst_mpeg_parse_parse_packhead),
(gst_mpeg_parse_loop), (gst_mpeg_parse_get_rate),
(gst_mpeg_parse_convert_src), (gst_mpeg_parse_handle_src_query),
(gst_mpeg_parse_handle_src_event), (gst_mpeg_parse_change_state):
* gst/mpegstream/gstmpegparse.h:
* gst/mpegstream/gstrfc2250enc.h:
Various changes to the way time is computed that make seeking and
total time estimation much better here.
Use G_BEGIN/END_DECLS instead of __cplusplus
* gst/videocrop/gstvideocrop.c: (gst_video_crop_chain):
Use gst_buffer_stamp instead of only copying the TIMESTAMP
Original commit message from CVS:
* gst/mpegstream/gstmpegparse.c: (gst_mpeg_parse_class_init)
Use 1/2 a second for default max_discont, as PES streams from DVB
seem to have larger spacings in the SCR.
Fix a typo.
Original commit message from CVS:
* ext/a52dec/gsta52dec.c: (gst_a52dec_push),
(gst_a52dec_handle_event), (gst_a52dec_chain):
Add some debug output. Check that a discont has a valid
time associated.
* ext/alsa/gstalsasink.c: (gst_alsa_sink_check_event),
(gst_alsa_sink_loop):
Ignore TAG events. A little extra debug for broken timestamps.
* ext/dvdnav/dvdnavsrc.c: (dvdnavsrc_init), (dvdnavsrc_loop),
(dvdnavsrc_change_state):
Ensure we send a discont to engage the link before we send any
other events.
* ext/dvdread/dvdreadsrc.c: (dvdreadsrc_init),
(dvdreadsrc_finalize), (_close), (_open), (_seek_title),
(_seek_chapter), (seek_sector), (dvdreadsrc_get),
(dvdreadsrc_uri_get_uri), (dvdreadsrc_uri_set_uri):
Handle URI of the form dvd://title[,chapter[,angle]]. Currently only
dvd://title works in totem because typefinding sends a seek that ends
up going back to chapter 1 regardless.
* ext/mpeg2dec/gstmpeg2dec.c:
* ext/mpeg2dec/gstmpeg2dec.h:
Output correct timestamps and handle disconts.
* ext/ogg/gstoggdemux.c: (get_relative):
Small guard against a null dereference.
* ext/pango/gsttextoverlay.c: (gst_textoverlay_finalize),
(gst_textoverlay_set_property):
Free memory when done. Don't call gst_event_filler_get_duration on
EOS events. Use GST_LOG and GST_WARNING instead of g_message and
g_warning.
* ext/smoothwave/gstsmoothwave.c: (gst_smoothwave_init),
(draw_line), (gst_smoothwave_dispose), (gst_sw_sinklink),
(gst_sw_srclink), (gst_smoothwave_chain):
Draw solid lines, prettier colours.
* gst/mpeg2sub/gstmpeg2subt.c: (gst_mpeg2subt_init):
Add a default palette that'll work for some movies.
* gst/mpegstream/gstdvddemux.c: (gst_dvd_demux_init),
(gst_dvd_demux_handle_dvd_event), (gst_dvd_demux_send_discont),
(gst_dvd_demux_send_subbuffer), (gst_dvd_demux_reset):
* gst/mpegstream/gstdvddemux.h:
* gst/mpegstream/gstmpegdemux.c: (gst_mpeg_demux_send_discont),
(gst_mpeg_demux_parse_syshead), (gst_mpeg_demux_parse_pes):
* gst/mpegstream/gstmpegparse.c: (gst_mpeg_parse_init),
(gst_mpeg_parse_handle_discont), (gst_mpeg_parse_parse_packhead):
* gst/mpegstream/gstmpegparse.h:
Use PTM/NAV events when for timestamp adjustment when connected to
dvdnavsrc. Don't use many discont events where one suffices.
* gst/playback/gstplaybasebin.c: (group_destroy),
(gen_preroll_element), (gst_play_base_bin_add_element):
* gst/playback/gstplaybasebin.h:
Make sure we remove subtitles from the same bin we put them in.
* gst/subparse/gstsubparse.c: (convert_encoding), (parse_subrip),
(gst_subparse_buffer_format_autodetect),
(gst_subparse_change_state):
Fix some memleaks and invalid accesses.
* gst/typefind/gsttypefindfunctions.c: (ogganx_type_find),
(oggskel_type_find), (cmml_type_find), (plugin_init):
Some typefind functions for Annodex v3.0 files
* gst/wavparse/gstwavparse.h:
GstRiffReadClass is the correct parent class.
Original commit message from CVS:
* gst/mpegstream/gstmpegparse.c: (gst_mpeg_parse_parse_packhead):
MPEG2 has a useful rate property, so we can actually use that.
For MPEG-1, continue using the bytes/time properties.
Original commit message from CVS:
Reviewed by: Ronald S. Bultje <rbultje@ronald.bitfreak.net>
* gst/mpegstream/gstdvddemux.c: (gst_dvd_demux_class_init),
(gst_dvd_demux_handle_discont):
* gst/mpegstream/gstmpegdemux.c: (gst_mpeg_demux_class_init),
(gst_mpeg_demux_handle_discont):
Recreate pads on new-media (#160730).
* gst/mpegstream/gstmpegparse.c: (gst_mpeg_parse_new_pad):
Send discont even if manager changes timestamps (#161929).
Original commit message from CVS:
* ext/dvdread/dvdreadsrc.c: (dvdreadsrc_class_init),
(dvdreadsrc_init), (dvdreadsrc_dispose), (dvdreadsrc_set_property),
(dvdreadsrc_get_property), (_open), (_seek), (_read),
(dvdreadsrc_get), (dvdreadsrc_open_file),
(dvdreadsrc_change_state):
Fix. Don't do one big huge loop around the whole DVD, that will
cache all data and thus eat sizeof(dvd) (several GB) before we
see something.
* gst-libs/gst/riff/riff-read.c: (gst_riff_read_seek):
Actually NULL'ify event after using it.
* gst/matroska/ebml-read.c: (gst_ebml_read_use_event),
(gst_ebml_read_handle_event), (gst_ebml_read_element_id),
(gst_ebml_read_element_length), (gst_ebml_read_element_data),
(gst_ebml_read_seek), (gst_ebml_read_skip):
Handle events.
* gst/mpegstream/gstdvddemux.c: (gst_dvd_demux_base_init),
(gst_dvd_demux_init), (gst_dvd_demux_get_audio_stream),
(gst_dvd_demux_get_subpicture_stream), (gst_dvd_demux_plugin_init):
Fix timing (this will probably break if I seek using menus, but
I didn't get there yet). VOBs and normal DVDs should now work.
Add a mpeg2-only pad with high rank so this get autoplugged for
MPEG-2 movies.
* gst/mpegstream/gstmpegdemux.c: (gst_mpeg_demux_base_init),
(gst_mpeg_demux_class_init), (gst_mpeg_demux_init),
(gst_mpeg_demux_new_output_pad), (gst_mpeg_demux_get_video_stream),
(gst_mpeg_demux_get_audio_stream),
(gst_mpeg_demux_get_private_stream), (gst_mpeg_demux_parse_packet),
(gst_mpeg_demux_parse_pes), (gst_mpeg_demux_plugin_init):
Use this as second rank for MPEG-1 and MPEG-2. Still use this for
MPEG-1 but use dvddemux for MPEG-2.
* gst/mpegstream/gstmpegparse.c: (gst_mpeg_parse_class_init),
(gst_mpeg_parse_init), (gst_mpeg_parse_new_pad),
(gst_mpeg_parse_parse_packhead):
Timing. Only add pad template if it exists. Add sink template from
class and not from ourselves. This means we will always use the
correct sink template even if it is not the one defined in this
file.
