Original commit message from CVS:
* ext/amrnb/amrnbparse.c: (gst_amrnbparse_get_type),
(gst_amrnbparse_class_init), (gst_amrnbparse_init),
(gst_amrnbparse_pull_header), (gst_amrnbparse_loop):
Fix pull mode operation some more: send newsegment event before
sending data; handle EOS and fatal flow returns a bit better; don't
leak buffers in some cases. Misc. minor cleanups. Fixes#431707.
Original commit message from CVS:
2007-03-27 Julien MOUTTE <julien@moutte.net>
* ext/mad/gstmad.c: (gst_mad_chain): Generate a perfect
stream and try to adapt to incoming timestamps lack of
precision up to half a frame. This allows generating
a perfect stream even with muxed formats like FLV where
the timestamps are stored in milliseconds.
Original commit message from CVS:
* ext/lame/gstlame.c: (gst_lame_setup):
Disable the bitrate checking when the user has requested
Free Format mode, as all bitrates less than the maximum
are valid then.
Original commit message from CVS:
* ext/mad/gstmad.c: (gst_mad_convert_sink), (gst_mad_convert_src):
When handling seeks, don't convert -1 start or stop values to a bogus
byte position - pass them upstream as -1.
Original commit message from CVS:
* ext/cdio/gstcdiocddasrc.c: (gst_cdio_cdda_src_open),
(gst_cdio_cdda_src_finalize):
Make sure we always destroy our libcdio handle.
Original commit message from CVS:
* ext/cdio/gstcdiocddasrc.c: (gst_cdio_cdda_src_probe_devices),
(gst_cdio_cdda_src_read_sector), (gst_cdio_cdda_src_open),
(gst_cdio_cdda_src_finalize):
Small code cleanups.
Don't use pad_alloc as the base class cannot deal with the error codes.
Original commit message from CVS:
Patch by: Zaheer Abbas Merali <zaheermerali at gmail com>
* ext/mpeg2dec/gstmpeg2dec.c: (gst_mpeg2dec_chain):
Never post a (fatal) error message on the bus on decoding errors. We
should only do this if we can't recover, but mpeg2dec can always
recover. This is needed for DVB streams, for example, where there
may be temporary glitches in the stream. Instead of an error
message, post a warning message on the bus for every N decoding
errors. Fixes#370020.
Original commit message from CVS:
* ext/lame/gstlame.c: (gst_lame_class_init), (gst_lame_init),
(gst_lame_setup):
Display sensible defaults and limits for the
vbr-min/max/mean properties. Fix the 'hard-limit' VBR min
property - it's supposed to be a boolean 0/1 value.
Original commit message from CVS:
* ext/lame/gstlame.c:
Initialise the variables so gcc doesn't complain about possibly
uninitialised uses, even though they can't actually happen.
Original commit message from CVS:
* ext/lame/gstlame.c: (gst_lame_sink_setcaps),
(gst_lame_set_property), (gst_lame_setup):
Fix up bitrate checking macro. Make it give us a
GST_ELEMENT_WARNING message so the application has a chance of
reporting this to the user. Move the checking to _setup, so we
are sure it runs in the READY state, when we hope to have a pipeline
and a bus that is not flushing.
This fixes e.g. using 96 kbit/sec as a bitrate.
Original commit message from CVS:
* ext/lame/gstlame.c: (gst_lame_sink_event), (gst_lame_chain),
(gst_lame_change_state):
* ext/lame/gstlame.h:
On receiving EOS, we try to push a last buffer with the remaining
samples. Don't do that if we got an unclean flow return on the last
gst_pad_push(), downstream might not handle this very gracefully
(see #403168).
* gst/mpegaudioparse/gstmpegaudioparse.c: (gst_mp3parse_chain):
Pass flow returns upstream (helps #403168).
Original commit message from CVS:
* ext/lame/gstlame.c: (gst_lame_sink_setcaps), (gst_lame_chain):
warn when outgoing sample rate is different from incoming
Original commit message from CVS:
Based on patch by: Roland Kay <roland.kay at ox compsoc net>
* ext/lame/gstlame.c: (gst_lame_init), (gst_lame_chain),
(gst_lame_setup):
* ext/lame/gstlame.h:
Fix leak (by calling lame_init_params() before lame_close()); handle
NULL return from lame_init() more gracefully. Fixes#385311.
Original commit message from CVS:
Patch by: Sebastian Dröge <slomo@circular-chaos.org>
* ext/mpeg2dec/gstmpeg2dec.c: (gst_mpeg2dec_init),
(gst_mpeg2dec_reset), (gst_mpeg2dec_alloc_sized_buf),
(gst_mpeg2dec_alloc_buffer), (init_dummybuf), (handle_slice):
* ext/mpeg2dec/gstmpeg2dec.h:
Align buffers to a 16 byte boundary so the altivec optimisations
don't crash. Fixes#327350.
Original commit message from CVS:
Patch by: Jan Arne Petersen <jpetersen at jpetersen dot org>
* ext/mpeg2dec/gstmpeg2dec.c: (handle_sequence), (handle_slice):
Simplify the framerate code and support more framerates. Fixes#361584.
Original commit message from CVS:
Patch by: Sebastian Dröge <slomo@circular-chaos.org>
* ext/mpeg2dec/gstmpeg2dec.c: (gst_mpeg2dec_init):
Fix minor memleak when creating pads from static pad templates (#369627).
* tests/check/Makefile.am:
* tests/check/elements/.cvsignore:
* tests/check/elements/mpeg2dec.c: (setup_mpeg2dec),
(cleanup_mpeg2dec), (GST_START_TEST), (mpeg2dec_suite), (main):
Add unit tests for mpeg2dec (#369627).
Original commit message from CVS:
* ext/lame/gstlame.c: (gst_lame_sink_event), (gst_lame_chain),
(gst_lame_change_state):
* ext/lame/gstlame.h:
Make lame timestamp flushed eos buffer by some additional timestamp
accounting. Fixes#374760.
Original commit message from CVS:
Patch by: Sebastian Droege <slomo at ubuntu dot com>
* ext/mpeg2dec/gstmpeg2dec.c: (gst_mpeg2dec_finalize),
(gst_mpeg2dec_alloc_buffer), (init_dummybuf), (handle_slice):
* ext/mpeg2dec/gstmpeg2dec.h:
libmpeg2 requires its output buffers to start at a 16byte aligned
address or the altivec optimizations will explode.
Original commit message from CVS:
* ext/cdio/gstcdio.c: (gst_cdio_get_cdtext):
* ext/cdio/gstcdio.h:
* ext/cdio/gstcdiocddasrc.c: (gst_cdio_cdda_src_open):
Move CD-TEXT utility function into common file so it can also be
used by a future cdioparanoiasrc.
Original commit message from CVS:
* ext/dvdread/dvdreadsrc.c: (gst_dvd_read_src_read):
Use dsi_pack.dsi_gi.vobu_ea correctly, add some more debugging
information (fixes#340433).
Original commit message from CVS:
* ext/dvdread/dvdreadsrc.c: (gst_dvd_read_src_goto_title):
Don't announce audio or subtitle streams that aren't really present,
it makes dvddemux create pads that will never carry any data, which
is not good.
Original commit message from CVS:
* ext/lame/gstlame.c: (gst_lame_set_property):
Round up not allowed bitrates to the next higher allowed one
(Closes: #361140).
Original commit message from CVS:
* ext/lame/gstlame.c: (gst_lame_sink_setcaps),
(gst_lame_set_property), (gst_lame_get_property), (gst_lame_chain),
(plugin_init):
* po/POTFILES.in:
Add i18n magic to lame plugin. Throw decent error message when we
fail to setup the encoder (#361140, 361151); misc. minor clean-ups.
Original commit message from CVS:
* ext/mpeg2dec/gstmpeg2dec.c: (handle_slice):
* ext/mpeg2dec/gstmpeg2dec.h:
Add some debugging to timestamp handling.
Make sure we don't convert invalid timestamps.
Original commit message from CVS:
* ext/mad/gstid3tag.c:
* gst/mpegstream/gstrfc2250enc.h:
* gst/synaesthesia/gstsynaesthesia.c:
More G_OBJECT macro fixing.
Original commit message from CVS:
Patch by: Yves Lefebvre <ivanohe at abacom dot com>
* ext/mpeg2dec/gstmpeg2dec.c: (init_dummybuf):
Fix initialisation dummy buffer, the offsets are relative to the start
of the buffers. Fixes#356004.
Original commit message from CVS:
* ext/dvdread/dvdreadsrc.c: (gst_dvd_read_src_read):
Add convert query (needed for later when we just operate in time
format and let the base source class handle all the seeking stuff).
Original commit message from CVS:
* ext/a52dec/gsta52dec.c: (gst_a52dec_mode_get_type),
(gst_a52dec_class_init), (gst_a52dec_init), (gst_a52dec_channels),
(gst_a52dec_handle_frame), (gst_a52dec_change_state),
(gst_a52dec_set_property), (gst_a52dec_get_property):
* ext/a52dec/gsta52dec.h:
Patch from from Michal Benes <michal.benes@itonis.tv>:
Add two things to a52dec: configure the exact output format for ac3
decoding through properties, if desired.
By default, configure an output format preferred by downstream. Now
that audioconvert lists caps by preference, this means that a52dec
can do downmixing (iff required) rather than audioconvert, so it can
use the ac3 downmix levels from the bitstream.
Original commit message from CVS:
* ext/lame/Makefile.am:
* ext/mpeg2dec/Makefile.am:
* gst/dvdlpcmdec/Makefile.am:
* gst/dvdsub/Makefile.am:
* gst/mpegaudioparse/Makefile.am:
Add missing GST_LIBS to the link flags
Original commit message from CVS:
Patch by: Michal Benes <michal dot benes at itonis dot tv>
* ext/mad/gstmad.c: (gst_mad_chain):
Fix timestamping in mad by only activating a new timestamp when the
previous frame has been decoded. Fixes#350723.
Also clean up some of the non fatal warnings when the input buffer is
too small to decode a header.
Original commit message from CVS:
Patch by: Wim Taymans <wim at fluendo dot com>
* ext/a52dec/gsta52dec.c: (gst_a52dec_sink_event):
Instead of forwarding the event in the wrong format, unref it and set
a boolean that we still need to send it in the streaming thread.
Fixes#350554
Original commit message from CVS:
Patch by: Edward Hervey (edward at fluendo dot com)
* ext/dvdread/dvdreadsrc.c: (plugin_init):
Put debug category initialization before use of GST_DEBUG, in order
to remove a fatal warning. Fixes#350895
Original commit message from CVS:
* ext/dvdread/dvdreadsrc.c: (gst_dvd_read_src_goto_title):
Error out properly if this is an interactive DVD (fixes#345694).
Original commit message from CVS:
* ext/a52dec/gsta52dec.c: (gst_a52dec_chain):
When the first_access is 1 or 0, we should copy the timestamp from
the incoming buffer if there is one.
Original commit message from CVS:
* ext/a52dec/gsta52dec.c: (gst_a52dec_channels), (gst_a52dec_push),
(gst_a52dec_reneg), (gst_a52dec_handle_frame), (gst_a52dec_chain):
Use GST_ELEMENT_ERROR for error reporting; post errors in some
more places; remove superfluous newlines from debug statements.
Original commit message from CVS:
* ext/dvdread/dvdreadsrc.c: (gst_dvd_read_src_stop),
(gst_dvd_read_src_goto_chapter),
(gst_dvd_read_src_get_chapter_starts),
(gst_dvd_read_src_goto_title), (gst_dvd_read_src_get_next_cell),
(gst_dvd_read_src_get_time_for_sector),
(gst_dvd_read_src_get_sector_from_time), (gst_dvd_read_src_read),
(gst_dvd_read_src_handle_seek_event), (gst_dvd_read_src_do_seek),
(gst_dvd_read_src_goto_sector):
* ext/dvdread/dvdreadsrc.h:
Add basic support for time-based seeking; set timestamps on
outgoing buffers if we have them; create table with
chapter to time mapping when opening a title; rename
gst_dvd_read_src_get_next_cell_for() to _get_next_cell() and
make it take an explicit pgc argument; fix up some debugging
messages so that title/chapter numbers are printed as starting
from 1 for easier readability.
Original commit message from CVS:
* ext/dvdread/dvdreadsrc.c: (plugin_init):
* po/POTFILES.in:
Make custom error messages translatable.
* gst/asfdemux/gstasf.c: (plugin_init):
Remove setlocale() call, doesn't seem to be needed or recommended for
plugins, at least not according to gstreamer/docs/random/i18n.
Original commit message from CVS:
2006-07-26 Zaheer Abbas Merali <zaheerabbas at merali dot org>
* ext/lame/gstlame.c: (gst_lame_setup):
Fix lame putting lots of 0's at start of mp3. Fixes bug #348786.
Original commit message from CVS:
* ext/dvdread/dvdreadsrc.c: (gst_dvd_read_src_init),
(gst_dvd_read_src_is_seekable), (gst_dvd_read_src_class_init),
(gst_dvd_read_src_stop), (gst_dvd_read_src_goto_title),
(gst_dvd_read_src_create), (gst_dvd_read_src_handle_seek_event),
(gst_dvd_read_src_do_seek), (gst_dvd_read_src_src_event):
* ext/dvdread/dvdreadsrc.h:
Rewrite seeking code and make seeking in DVDs work (#337834).
Original commit message from CVS:
* ext/a52dec/gsta52dec.c: (plugin_init):
Call the channel positions get_type() method in plugin_init
to ensure that it isn't simultaneously called later from
multiple threads.
Original commit message from CVS:
* ext/a52dec/gsta52dec.c: (gst_a52dec_channels), (plugin_init):
Treat dual-mono as stereo. It should really be output on 2 separate
pads, but isn't for now.
Original commit message from CVS:
* ext/mpeg2dec/gstmpeg2dec.c: (gst_mpeg2dec_negotiate_format):
Assume pixel-aspect-ratio of 4:3 if libmpeg2dec doesn't give us
any PAR whatsoever (rather than using 0/0, which will lead to
an abort later on). Fixes#345184.
Original commit message from CVS:
Patch by: Michael Dominic K. < mdk at mdk org pl>
* ext/mad/gstmad.c: (gst_mad_chain):
Send newsegment event before calling
gst_pad_alloc_buffer_and_set_caps(), makes mad behave better
in connection with pad blocking (#342594). While we're at it,
do some minor clean-ups.
Original commit message from CVS:
* ext/a52dec/Makefile.am:
... and then he said "When you go and fix the build you
better make sure you have some spare backslashes in your
pocket".
Original commit message from CVS:
* ext/sidplay/gstsiddec.cc:
Fix copyright, email addresses and descriptions.
Use saner defaults for arguments. Fixes#344667.
constify some stuff.
Fix memleaks.
Add tags.
Fix negotiation to do mono/44100 by default.
Post error messages.
Use _scale_int where possible.
Original commit message from CVS:
* ext/mpeg2dec/gstmpeg2dec.c: (gst_mpeg2dec_finalize),
(gst_mpeg2dec_reset), (clear_buffers), (handle_picture),
(gst_mpeg2dec_sink_convert), (gst_mpeg2dec_src_convert),
(gst_mpeg2dec_change_state):
* ext/mpeg2dec/gstmpeg2dec.h:
Simplify and don't leak our buffer pool.
Use _scale_int.
Remove unfixed bug number from previous ChangeLog entry.
Original commit message from CVS:
* ext/mpeg2dec/gstmpeg2dec.c: (gst_mpeg2dec_base_init),
(gst_mpeg2dec_class_init), (gst_mpeg2dec_init),
(gst_mpeg2dec_finalize), (gst_mpeg2dec_reset),
(gst_mpeg2dec_qos_reset), (gst_mpeg2dec_alloc_buffer),
(gst_mpeg2dec_negotiate_format), (init_dummybuf),
(handle_sequence), (handle_picture), (handle_slice),
(gst_mpeg2dec_chain), (gst_mpeg2dec_sink_event),
(gst_mpeg2dec_src_event), (gst_mpeg2dec_change_state):
* ext/mpeg2dec/gstmpeg2dec.h:
Fix padtemplate as we can now do fractional framerates.
Small cleanups.
Use GstSegment.
Add simple frame dropping QoS.
Precalc buffer output sizes and UV offsets.
Always give libmpeg2 a valid fbuf when it wants one.
don't trust libmpeg to discard our buffers but manage it
ourselves.
Fixes#343627, #327350, #335288
Original commit message from CVS:
* ext/amrnb/amrnbdec.c: (gst_amrnbdec_event), (gst_amrnbdec_chain):
* ext/amrnb/amrnbparse.c: (gst_amrnbparse_init),
(gst_amrnbparse_sink_event), (gst_amrnbparse_chain),
(gst_amrnbparse_sink_activate), (gst_amrnbparse_state_change):
* ext/amrnb/amrnbparse.h:
Sortof first quick cleanup of all this mess...
Don't crap out on empty and invalid FTs but treat them as
empty packets, the decoder handles them fine.
Fixes#342222.
Original commit message from CVS:
Patch by: James "Doc" Livingston <doclivingston gmail com>
* ext/mad/gstid3tag.c: (gst_id3_tag_get_tag_to_render):
Do tag merging correctly (#339918). Output taglists
properly in debug statements too while we're at it.
Original commit message from CVS:
* ext/a52dec/gsta52dec.c: (gst_a52dec_chain):
Add more debug
* gst/dvdlpcmdec/gstdvdlpcmdec.c: (gst_dvdlpcm_reset),
(gst_dvdlpcmdec_init), (update_timestamps),
(gst_dvdlpcmdec_chain_dvd), (gst_dvdlpcmdec_chain_raw),
(dvdlpcmdec_sink_event):
* gst/dvdlpcmdec/gstdvdlpcmdec.h:
If we have a first_access offset but no current timestamp (might
happen after a seek), then calculate a start time for the first
portion so that it will align with the timestamp given for the
first_access portion.
If a new-segment arrives with format time, store the start
time as a failsafe timestamp in case we never get any further
timestamp info (unlikely)
Mask out the 'frame number' section of the incoming header so
that we don't consider it to be changing on every buffer and
reset the caps constantly.
Use gst_util_uint64_scale for duration calculation
Original commit message from CVS:
* ext/lame/gstlame.c: (gst_lame_get_type),
(gst_lame_release_memory), (gst_lame_init), (gst_lame_sink_event),
(gst_lame_setup), (gst_lame_change_state):
* ext/lame/gstlame.h:
Remove tag writing from lame (which was completely broken
anyway, #329184). Leaving GstTagSetter interface around for
now, albeit non-functional. Should be removed completely
in 0.11. Use the 'id3v2mux' plugin from -good for writing
tags.
Original commit message from CVS:
Patch by: Andres Salomon <dilinger at debian org>
* ext/lame/gstlame.c: (gst_lame_sink_event):
Fix typo (comma vs. semicolon) (#340710).
Original commit message from CVS:
Patch by: Lutz Müller <lutz at topfrose de>
* ext/mad/gstmad.c: (gst_mad_init), (gst_mad_src_query):
Make mad the second element to support the highly useful
FORMATS query (#340594)
Original commit message from CVS:
* ext/mpeg2dec/gstmpeg2dec.c: (gst_mpeg2dec_sink_convert),
(gst_mpeg2dec_src_query):
Remember the query duration format before passing it upstream since it
could have been modified.
Add GST_WARNING_OBJECT in sink convert function to detail why the
conversion didn't work.
Original commit message from CVS:
* ext/mad/gstid3tag.c:
* ext/mad/gstmad.c:
* gst/ac3parse/gstac3parse.c:
* gst/dvdlpcmdec/gstdvdlpcmdec.c:
* gst/synaesthesia/gstsynaesthesia.c:
Define GstElementDetails as const and also static (when defined as
global)
Original commit message from CVS:
* ext/dvdnav/dvdnavsrc.c: (gst_dvd_nav_src_push_titlelang_event):
Fix name of custom event (use same as dvdreadsrc).
* gst/dvdsub/gstdvdsubdec.c: (gst_dvd_sub_dec_chain),
(gst_dvd_sub_dec_sink_event), (gst_dvd_sub_dec_handle_dvd_event):
Fix event parsing (the event name is in the structure, not the
name of the structure itself); also fix indentation after
boilerplate macro.
Original commit message from CVS:
Patch by: Alexander Lancaster <alexl at users sourceforge net>
* ext/mad/gstid3tag.c: (gst_id3_tag_get_caps), (gst_id3_tag_init),
(gst_id3_tag_sink_event), (gst_id3_tag_src_link),
(gst_id3_tag_chain):
When acting as a muxer, set caps on outgoing buffers and set caps
on source pad (fixes#323658). Remove unused application/x-gst-tags
cruft from the 0.6 days.
Original commit message from CVS:
* ext/mad/gstmad.c: (gst_mad_convert_sink), (gst_mad_convert_src),
(gst_mad_src_query), (gst_mad_chain):
.. and DEFAULT queries should work too. Use magic gst util scale
functions in some places.
Original commit message from CVS:
Patch by: Ed Catmur <ed at catmur dot co dot uk>
* ext/lame/gstlame.c: (gst_lame_sink_event):
Don't crash if we get an EOS event before the encoder
has been set up (#339287).
Original commit message from CVS:
* ext/dvdread/dvdreadsrc.c: (gst_dvd_read_src_start),
(gst_dvd_read_src_goto_title), (gst_dvd_read_src_read),
(gst_dvd_read_src_create), (gst_dvd_read_src_goto_sector):
Move errors out of the normal code flow.
Don't send eos, basesrc will do that for us when needed.
Original commit message from CVS:
* ext/mpeg2dec/gstmpeg2dec.c: (gst_mpeg2dec_alloc_sized_buf),
(gst_mpeg2dec_alloc_buffer):
Can't use gst_pad_alloc_buffer*() when we are going to crop
the image before sending it out. Downstream basetransform-based
elements will complain about the wrong unit size otherwise
(when not operating in passthrough-mode at least).
Const-ify some static variables and do some minor clean-ups.
Use I420 macros for size/offsets (not really necessary in this
particular context, but this kind of code gets copy'n'pasted).
Original commit message from CVS:
add test for amrnbenc, enable test infrastructure, and fix a leak
* common/check.mak:
allow for specifying more than one suppressions file in SUPPRESSIONS
* Makefile.am:
* tests/Makefile.am:
* tests/check/.cvsignore:
* tests/check/Makefile.am:
* tests/check/elements/.cvsignore:
* configure.ac:
add tests/check
* tests/check/gst-plugins-ugly.supp:
add suppressions for libs used by -ugly
* tests/check/elements/amrnbenc.c: (buffer_new), (buffer_unref),
(setup_amrnbenc), (cleanup_amrnbenc), (push_data),
(GST_START_TEST), (amrnbenc_suite), (main):
add a simple test for encoding amr
* ext/amrnb/amrnbenc.c: (gst_amrnbenc_init):
fix pad template leaks
Original commit message from CVS:
* ext/mad/gstmad.c: (index_seek):
move GstIndexEntry *entry variable declaration before
the first instruction
* ext/mad/gstmad.c:
remove debug macros with variable number of parameter by using
GST_DEBUG for WIN32
* gst/dvdsub/gstdvdsubdec.c: (gst_dvd_sub_dec_parse_subpic):
use gst_guint64_to_gdouble for conversions
* gst/mpegstream/gstmpegdemux.c: (gst_mpeg_demux_sync_stream_to_time):
replace __FUNCTION__ which is not supported by MSVC by the current function name
* gst/mpegstream/gstmpegdemux.c: (gst_mpeg_demux_reset):
remove LL suffix by using G_GINT64_CONSTANT
* gst/mpegstream/gstmpegparse.c: (gst_mpeg_parse_parse_packhead),(gst_mpeg_parse_get_rate):
use gst_guint64_to_gdouble for conversions
* gst/mpegstream/gstmpegparse.h:
remove LL suffix by using G_GINT64_CONSTANT
* win32/vs6:
add project files for tagac3parse, asfdemux, dvdlpcmdec, dvdsub, iec958, lame,
mad, mpegaudioparse, mpegstream, realmedia, synaesthesia
Original commit message from CVS:
* ext/dvdread/dvdreadsrc.c: (gst_dvd_read_src_init),
(gst_dvd_read_src_goto_title), (gst_dvd_read_src_read):
Name the structure in the custom event with the
language codes for the audio and subtitle streams
actually like dvddemux expects it to be named.
Set caps on source pad and outgoing buffers.
Original commit message from CVS:
* ext/lame/gstlame.c: (gst_lame_init), (gst_lame_set_property),
(gst_lame_get_property), (gst_lame_setup):
* ext/lame/gstlame.h:
Make xingheader property non-functional, it's broken anyway
after all (use xingmux instead).
Original commit message from CVS:
* ext/lame/gstlame.c: (gst_lame_sink_event):
On EOS, flush encoder and send remaining data. Fix
return value handling in sink event function.
Original commit message from CVS:
Patch by: Jürg Billeter <j at bitron dot ch>
* ext/dvdread/dvdreadsrc.c: (gst_dvd_read_src_set_property):
Fix wrong check for started flag when setting the 'device' property.
We want to allow it when the source is NOT started yet and ignore it
when the source is running.
Original commit message from CVS:
* ext/a52dec/gsta52dec.c: (gst_a52dec_sink_event),
(gst_a52dec_chain_raw), (gst_a52dec_change_state):
* ext/a52dec/gsta52dec.h:
Fix#334550: failure to play raw AC3 files due to segment problems.
Original commit message from CVS:
* ext/mad/gstmad.c: (gst_mad_convert_sink), (gst_mad_update_info),
(gst_mad_sink_event), (gst_mad_change_state):
Include AUDIO_CODEC tag with tags posted if input is not
framed (#334258). Use _scale() util functions in more places.
Original commit message from CVS:
2006-03-12 Christophe Fergeau <teuf@gnome.org>
Reviewed by: Tim-Philipp Müller <tim at centricular dot net>
* ext/lame/gstlame.c: (gst_lame_class_init): mark the xing-header
property as BROKEN (see
http://bugzilla.gnome.org/show_bug.cgi?id=330317#c19 for an
explanation why it's broken).
Original commit message from CVS:
* ext/mad/gstid3tag.c: (tag_list_to_id3_tag_foreach):
Add support for writing the GST_TAG_ALBUM_VOLUME_NUMBER
tag (#333683, patch by: Alex Lancaster).
Original commit message from CVS:
* ext/amrnb/amrnbdec.c: (gst_amrnbdec_init),
(gst_amrnbdec_setcaps), (gst_amrnbdec_chain),
(gst_amrnbdec_state_change):
* ext/amrnb/amrnbenc.c: (gst_amrnbenc_init),
(gst_amrnbenc_setcaps), (gst_amrnbenc_chain),
(gst_amrnbenc_state_change):
* ext/amrnb/amrnbenc.h:
* ext/amrnb/amrnbparse.c: (gst_amrnbparse_init),
(gst_amrnbparse_query):
Further fancyfication.
Use _take to get writable data from the adapter.
Precalc packet duration.
Handle disconts.
Forward _push to upstream.
Post error messages when something goes wrong.
Remove old code in amrnbparse.
Don't ignore query results from upstream.
Original commit message from CVS:
* ext/amrnb/amrnbenc.c: (gst_amrnbenc_chain):
The AMR encoder writes into the audio buffers it processes, so
use gst_buffer_make_writable() on buffers we might (they go through
an adapter, so there can be copying going on later anyway) be
encoding.
Original commit message from CVS:
Reviewed by: Tim-Philipp Müller <tim at centricular dot net>
* ext/mpeg2dec/gstmpeg2dec.c: (gst_mpeg2dec_init),
(gst_mpeg2dec_reset), (gst_mpeg2dec_chain):
* ext/mpeg2dec/gstmpeg2dec.h:
Don't treat STATE_INVALID as fatal error; throw an error
only after five consecutive decoding errors. Makes decoding
mpeg streams more robust and fixes playback of joined clips
(#300682).
Original commit message from CVS:
* ext/cdio/Makefile.am:
Add GST_BASE_CFLAGS and GST_BASE_LIBS (seems to be
required for Cygwin, see #317048)
* gst/rtp/gstasteriskh263.c:
Cygwin has includes for both the unix network socket API
and the windows API, but only one can be included, so fix
includes to only use one or the other, prefering the unxi
one (#317048).
Original commit message from CVS:
* ext/mpeg2dec/gstmpeg2dec.c: (crop_copy_i420_buffer),
(crop_copy_i422_buffer), (crop_buffer):
When we need to crop the output buffer, make sure we
create a buffer of the right size and respect the implicit
striding used for I420 elsewhere in GStreamer (#331301).
Original commit message from CVS:
* ext/lame/gstlame.c: (gst_lame_init), (gst_lame_chain),
(gst_lame_change_state):
Fix up lame a bit.
Apply patch #319782 by Gautier Portet.
Original commit message from CVS:
* ext/mad/gstmad.c: (gst_mad_init), (scale), (gst_mad_update_info),
(gst_mad_sink_event), (gst_mad_check_caps_reset), (gst_mad_chain),
(gst_mad_change_state):
Port fixes for bugs 314771, 308772, 140237, and 302625
from 0.8 (Patch by Jonathan Matthew, Fixes#329575)
Use GST_EVENT_FLUSH_STOP to clear data from the current input
buffer, to avoid using it for any future decoding.
Original commit message from CVS:
* ext/amrnb/amrnbdec.c: (gst_amrnbdec_setcaps),
(gst_amrnbdec_chain), (gst_amrnbdec_state_change):
Some more comments.
* ext/mpeg2dec/gstmpeg2dec.c: (crop_buffer), (handle_slice):
Applied patch from Fabrizio Gennari, fixes#330844.
Original commit message from CVS:
* ext/dvdread/dvdreadsrc.c: (gst_dvd_read_src_init),
(gst_dvd_read_src_class_init), (gst_dvd_read_src_start),
(gst_dvd_read_src_stop), (gst_dvd_read_src_goto_title),
(gst_dvd_read_src_set_property), (gst_dvd_read_src_get_property),
(gst_dvd_read_src_uri_get_uri), (gst_dvd_read_src_uri_set_uri):
* ext/dvdread/dvdreadsrc.h:
Let's try to play the title the user set via the URI handler or
via properties instead of always playing the first title. Also,
Also, count title/chapter/angle number in URI and properties
from 1 rather than 0.
Original commit message from CVS:
* ext/dvdread/dvdreadsrc.c: (gst_dvd_read_src_class_init),
(gst_dvd_read_src_get_size), (gst_dvd_read_src_do_seek),
(gst_dvd_read_src_do_duration_query):
Don't implement GstBaseSrc::get_size or GstBaseSrc::is_seekable,
otherwise GstBaseSrc will think we can operate pull_range based,
which we don't really, and typefinding will fail miserably.
Also, make seeking work somewhat (only works with flumpegdemux
at the moment, mpegstream needs fixing for that first).
Original commit message from CVS:
* ext/dvdread/dvdreadsrc.c: (gst_dvd_read_src_read),
(gst_dvd_read_src_create), (gst_dvd_read_src_src_event):
Only allocate buffer once we know exactly how much we need,
rather than gratuitously allocating 2MB-buffers all the time
even if we usually need much less than that. Also, demote
a debug message from DEBUG to LOG level.
Original commit message from CVS:
* ext/dvdread/dvdreadsrc.c: (gst_dvd_read_src_class_init),
(gst_dvd_read_src_seekable), (gst_dvd_read_src_get_size),
(gst_dvd_read_src_do_seek), (gst_dvd_read_src_do_duration_query),
(gst_dvd_read_src_do_position_query):
Add some more debugging and fix duration query in BYTES.
Original commit message from CVS:
* configure.ac:
* ext/Makefile.am:
* ext/dvdread/Makefile.am:
* ext/dvdread/dvdreadsrc.c:
* ext/dvdread/dvdreadsrc.h:
Half-baked port to 0.10. Needs some love
in the seeking department, but at least
it does something.
* ext/dvdread/stream_labels.c:
* ext/dvdread/stream_labels.h:
Remove these (we use ISO-639 language codes internally; applications
that want to translate those into language names for display to the
user should rely on the iso-codes package for that).
Original commit message from CVS:
* ext/amrnb/amrnbdec.c: (gst_amrnbdec_init),
(gst_amrnbdec_setcaps), (gst_amrnbdec_event), (gst_amrnbdec_chain),
(gst_amrnbdec_state_change):
* ext/amrnb/amrnbdec.h:
Fix amrnbdec, handle events, take copy from adapter since the decoder
apparently writes in the source data.
Use some _scale_int, and precalc duration.
Fix some leaks, post ERROR messages.
Original commit message from CVS:
* docs/plugins/Makefile.am:
* docs/plugins/gst-plugins-good-plugins-docs.sgml:
* docs/plugins/gst-plugins-good-plugins-sections.txt:
* docs/plugins/inspect/plugin-cdio.xml:
Add cdio plugin to docs.
* ext/cdio/gstcdiocddasrc.c:
Add gtk-doc blurb.
* ext/cdio/gstcdio.c:
The plugin is called 'cdio' not 'cddio'.
Original commit message from CVS:
* ext/lame/gstlame.c: (gst_lame_finalize), (gst_lame_class_init),
(gst_lame_init), (add_one_tag), (gst_lame_set_metadata):
* ext/lame/gstlame.h:
Contrary to what the const char in the lame API might suggest,
lame expects us to keep the strings we pass to id3tag_set_foo()
around; it doesn't free them either though, so we have to store
them somewhere and free them later when we can be sure lame
doesn't need them any longer.
Original commit message from CVS:
* ext/lame/gstlame.c: (add_one_tag):
Fix handling of GST_TAG_DATE (#311679), don't pass an
uninitialised string pointer to lame if we don't know
how to handle the tag type, and fix minor memory leak.
Original commit message from CVS:
2006-01-20 Thomas Vander Stichele <thomas at apestaart dot org>
* ext/dvdnav/dvdnavsrc.c: (if):
* ext/dvdread/stream_labels.c:
* gst/asfdemux/gstasfdemux.c: (gst_asf_demux_process_segment):
* gst/realmedia/rmdemux.c: (gst_rmdemux_loop):
fix up error domains, error strings, and use of translation
* po/POTFILES.in:
fix up this file, even though none of them are actually marked
for build yet.
Original commit message from CVS:
* configure.ac:
* ext/Makefile.am:
* ext/cdio/Makefile.am:
* ext/cdio/gstcdio.c:
* ext/cdio/gstcdio.h:
* ext/cdio/gstcdiocddasrc.c:
* ext/cdio/gstcdiocddasrc.h:
Port libcdio cdda source, formerly known as cddasrc, now known as
cdiocddasrc (fixes#323327). Should also read CD-TEXT if available,
but that's not tested (fixes#317658).
Original commit message from CVS:
* ext/amrnb/amrnbparse.c: (gst_amrnbparse_query):
* ext/mad/gstid3tag.c: (gst_id3_tag_src_query):
* ext/mad/gstmad.c: (gst_mad_src_query):
* ext/mpeg2dec/gstmpeg2dec.c: (gst_mpeg2dec_src_query):
* ext/sidplay/gstsiddec.cc:
* gst/mpegstream/gstmpegparse.c: (gst_mpeg_parse_handle_src_query):
* gst/realmedia/rmdemux.c: (gst_rmdemux_src_query):
Pass unhandled queries upstream (useful e.g. for SEEKING query)
(fixes#325652; based on patch by: Philippe); make rmdemux return
FALSE for position queries, instead of setting -1 as value and
returning TRUE.
Original commit message from CVS:
* ext/mad/gstmad.c: (gst_mad_chain):
Don't forget that we need to send out a newsegment event after a
restart even if we don't have enough data to decode a frame right
now.
Original commit message from CVS:
* ext/mad/gstid3tag.c: (gst_id3_tag_get_type):
Remove lingering reference to GstID3Demux
* gst/mpegstream/gstmpegdemux.c: (gst_mpeg_demux_parse_pes):
Don't output debug saying padding streams are unknown type,
because they're not
Original commit message from CVS:
* ext/mpeg2dec/gstmpeg2dec.c: (gst_mpeg2dec_src_event):
When getting a seek event, first check if the upstream element
can handle it and only do our own seek stuff when it can't
(should fix#322856).
Original commit message from CVS:
Reviewed by: Tim-Philipp Müller <tim at centricular dot net>
* ext/mpeg2dec/gstmpeg2dec.c: (normal_seek):
Really convert to BYTES format when we want to convert
to bytes (use right variable; fixes#322856).
Original commit message from CVS:
* ext/mad/gstid3tag.c: (gst_id3_tag_do_typefind),
(gst_id3_tag_do_caps_nego), (gst_id3_tag_chain), (plugin_init):
Fix typefinding in id3demux, and then remove it in favour
of the new LGPL id3demux in gst-plugins-good
* ext/mad/gstmad.c: (gst_mad_dispose):
dispose can run more than once.
Original commit message from CVS:
* ext/mad/gstid3tag.c: (gst_mad_id3_to_tag_list),
(gst_id3_tag_do_typefind):
Use the correct function to free typefind factory list.
Original commit message from CVS:
* ext/mad/gstmad.c: (gst_mad_src_query):
For position and duration queries in TIME format, try the peer
first (might be a demuxer).
Original commit message from CVS:
* ext/mad/gstid3tag.c: (gst_mad_id3_to_tag_list):
g_warning() are only for really fatal warnings. If we can't decode a
tag, just ignore that tag and do a GST_WARNING.
Original commit message from CVS:
2005-12-05 Andy Wingo <wingo@pobox.com>
* ext/mad/gstid3tag.c (plugin_init): Remove id3tag -- there's just
id3demux and id3mux now. Fixes#323199.
Original commit message from CVS:
* ext/mad/gstmad.c: (gst_mad_chain):
Proper warning statements,
Don't error if the src pad isn't linked when pushing.
* gst/mpegstream/gstmpegparse.c: (gst_mpeg_parse_change_state):
Proper state_change, avoids borkage when going to READY
Original commit message from CVS:
* ext/mpeg2dec/gstmpeg2dec.c: (handle_sequence):
Prime libmpeg2's pumps with some null custom buffers
to ensure it ask us to discard garbage later yay.
Original commit message from CVS:
* ext/a52dec/gsta52dec.c: (gst_a52dec_init),
(gst_a52dec_sink_setcaps), (gst_a52dec_chain),
(gst_a52dec_chain_raw):
* ext/a52dec/gsta52dec.h:
Accept AC3 in audio/x-private1-ac3 format, which includes
DVD-specific headers, as well as raw AC3, for compatibility with
some demuxers.
Original commit message from CVS:
* ext/mad/gstmad.c: (gst_mad_chain):
When pad_alloc returns other-than-GST_FLOW_OK and mad exits early,
skip frame synthesis and consume input data as if we'd done the
decode. Makes mad not error when the src pad is not connected.
(#319784)
Original commit message from CVS:
* ext/mad/gstmad.c: (gst_mad_chain):
Fix seeking even more by sending the newsegment event with the
right parameters. Should fix querying in playbin/totem after
a seek.
Original commit message from CVS:
* ext/mad/gstmad.c: (gst_mad_mode_get_type), (gst_mad_src_query),
(normal_seek), (gst_mad_sink_event), (gst_mad_chain):
Fix seeking in stand-alone mode. Fix nonexistant enum value
introduced in previous commit. Improve debug messages here and
there. Actually return a proper return value in the sink event
handler.
Original commit message from CVS:
* ext/mpeg2dec/gstmpeg2dec.c: (handle_slice),
(gst_mpeg2dec_sink_event):
Set DELTA_UNIT flag on outgoing buffers if this is NOT a keyframe;
nice-ify debug message in event handler; add CHECKME.
* gst/mpegstream/gstdvddemux.c: (gst_dvd_demux_process_event),
(gst_dvd_demux_send_event), (gst_dvd_demux_process_private),
(gst_dvd_demux_send_subbuffer), (gst_dvd_demux_reset),
(gst_dvd_demux_sync_stream_to_time):
* gst/mpegstream/gstmpegdemux.c: (gst_mpeg_demux_class_init),
(gst_mpeg_demux_process_event), (gst_mpeg_demux_send_event),
(gst_mpeg_demux_handle_discont), (gst_mpeg_demux_new_output_pad),
(gst_mpeg_demux_parse_packet), (gst_mpeg_demux_parse_pes),
(gst_mpeg_demux_send_subbuffer), (gst_mpeg_demux_process_private),
(gst_mpeg_demux_sync_stream_to_time),
(gst_mpeg_demux_handle_src_event), (gst_mpeg_demux_reset):
* gst/mpegstream/gstmpegdemux.h:
* gst/mpegstream/gstmpegparse.c: (gst_mpeg_parse_init),
(gst_mpeg_parse_handle_discont), (gst_mpeg_parse_send_buffer),
(gst_mpeg_parse_process_event), (gst_mpeg_parse_send_discont),
(gst_mpeg_parse_send_event), (gst_mpeg_parse_event),
(gst_mpeg_parse_chain):
* gst/mpegstream/gstmpegparse.h:
Get rid of GST_PAD_IS_USABLE and fix GstFlowReturn vs. gboolean
return value confusion (gst_pad_push vs. gst_pad_send_event and
gst_pad_push_event); pass flow return values to caller;
miscellaneous fixes and clean-ups.
Original commit message from CVS:
* ext/mpeg2dec/gstmpeg2dec.c: (gst_mpeg2dec_negotiate_format),
(handle_sequence), (handle_slice), (gst_mpeg2dec_chain),
(gst_mpeg2dec_src_query), (gst_mpeg2dec_change_state):
Small cleanups in refcounting.
Original commit message from CVS:
* ext/a52dec/Makefile.am:
* ext/a52dec/gsta52dec.c: (gst_a52dec_base_init),
(gst_a52dec_class_init), (gst_a52dec_sink_event),
(gst_a52dec_change_state):
* ext/a52dec/gsta52dec.h:
Re-enable CPU flags, use liboil to get them.
Original commit message from CVS:
* ext/amrnb/amrnbdec.c:
Mark invalid frame sizes
* ext/mad/gstmad.c: (gst_mad_init), (gst_mad_chain):
UNUSABLE is not to be used here, just push out stuff so
probes can continue linking or making the pad usable.
Original commit message from CVS:
* ext/amrnb/amrnbdec.c: (gst_amrnbdec_state_change):
* ext/amrnb/amrnbenc.c: (gst_amrnbenc_state_change):
* ext/amrnb/amrnbparse.c: (gst_amrnbparse_state_change):
State change function updates.
Original commit message from CVS:
2005-08-25 Andy Wingo <wingo@pobox.com>
* ext/ladspa/gstladspa.h:
* ext/ladspa/gstladspa.c: Halfway-ported. Doesn't compile yet.
* ext/ladspa/gstsignalprocessor.h:
* ext/ladspa/gstsignalprocessor.c: New files, the start of a base
class for DSP elements.
* configure.ac: Sort the external libs checks, add a ladspa check,
output the ladspa makefile.
Original commit message from CVS:
* configure.ac:
* ext/Makefile.am:
* ext/speex/Makefile.am:
* ext/speex/gstspeex.c: (plugin_init):
* ext/speex/gstspeexdec.c: (speex_get_query_types),
(gst_speex_dec_init), (speex_dec_src_query), (speex_dec_src_event),
(speex_dec_event), (speex_dec_chain):
Port speexdec. Leads to some unfamiliar warnings on console,
but works otherwise.
Original commit message from CVS:
* ext/mad/gstid3tag.c: (gst_id3_tag_init),
(gst_id3_tag_sink_event), (gst_id3_tag_do_caps_nego),
(gst_id3_tag_chain), (gst_id3_tag_change_state), (plugin_init):
Works a bit better now, but still needs a rewrite to use
get_range instead of this seeking nastiness.
Original commit message from CVS:
* ext/amrnb/amrnbdec.c:
* ext/amrnb/amrnbenc.c: (gst_amrnbenc_setcaps):
* ext/amrnb/amrnbparse.c:
Update caps with audio/AMR.
* gst/rtp/gstrtpamrdec.c: (gst_rtpamrdec_init),
(gst_rtpamrdec_sink_setcaps), (gst_rtpamrdec_chain),
(gst_rtpamrdec_change_state):
* gst/rtp/gstrtpamrdec.h:
* gst/rtp/gstrtpamrenc.c: (gst_rtpamrenc_class_init),
(gst_rtpamrenc_init), (gst_rtpamrenc_chain):
Dont set FT headers twice, it was already in the encoded
bitstream.
* gst/rtsp/gstrtspsrc.c: (gst_rtspsrc_send), (gst_rtspsrc_open),
(gst_rtspsrc_close), (gst_rtspsrc_play):
* gst/rtsp/rtspconnection.c: (parse_line):
Cleanups
* gst/udp/gstudpsrc.c: (gst_udpsrc_class_init),
(gst_udpsrc_create), (gst_udpsrc_set_property),
(gst_udpsrc_get_property):
* gst/udp/gstudpsrc.h:
Added caps property, we need this soon to type the buffers.
Original commit message from CVS:
* ext/mad/Makefile.am:
* gst/avi/Makefile.am:
* gst/effectv/Makefile.am:
* gst/udp/Makefile.am:
* gst/wavparse/Makefile.am:
Use -lgstfoo-@GST_MAJORMINOR@ instead of -lgstfoo-0.9
Original commit message from CVS:
* ext/mad/gstmad.c: (gst_mad_init), (gst_mad_chain):
It'd be nice if I could listen to my mp3 files, so send out an
initial discont, as the sink apparently wants.
Original commit message from CVS:
* configure.ac:
* ext/Makefile.am:
* ext/libpng/Makefile.am:
* ext/libpng/gstpng.c:
* ext/libpng/gstpngenc.c:
Ported pngenc , still have to port pngdec...
Original commit message from CVS:
* ext/mad/gstmad.c: (gst_mad_src_event):
First try forwarding events, makes seeking in AVI files with mp3
audio work again.
Original commit message from CVS:
* gst/base/gstbasesrc.c: (gst_base_src_get_range),
(gst_base_src_default_negotiate), (gst_base_src_negotiate):
Allow subclasses to implement their own negotiation.
Original commit message from CVS:
2005-07-01 Jan Schmidt <thaytan@mad.scientist.com>
* configure.ac:
* ext/mad/Makefile.am:
* sys/oss/Makefile.am:
Roll gstreamer-interfaces-0.9.pc into gstreamer-plugins-base-0.9.pc
Original commit message from CVS:
2005-07-01 Jan Schmidt <thaytan@mad.scientist.com>
* ext/libcaca/Makefile.am:
* ext/mad/Makefile.am:
* gst/effectv/Makefile.am:
* gst/udp/Makefile.am:
Replace GST_PLUGINS_LIBS_* with GST_PLUGINS_BASE_*
* ext/mad/gstid3tag.c: (gst_id3_tag_src_query),
(gst_id3_tag_src_event), (gst_id3_tag_sink_event),
(gst_id3_tag_chain), (plugin_init):
* ext/mad/gstmad.c: (gst_mad_src_query), (gst_mad_chain):
Signedness warning fix, use gst_pad_get_peer instead of GST_PAD_PEER
in querying and event handling, because we're not holding the pad
lock and the peer may disappear.
* gst/avi/gstavidemux.c: (gst_avi_demux_parse_subindex),
(gst_avi_demux_parse_index), (gst_avi_demux_massage_index):
Signedness warning fixes.
* gst/videofilter/gstvideotemplate.c: (plugin_init):
Remove gst_library_load
Original commit message from CVS:
* gst/avi/Makefile.am: (libgstavi_la_LIBADD):
Added linking to libgstriff-0.9
* ext/mad/gstmad.c: (gst_mad_src_query):
check the format of the upstream query and return query if it's the
same format as the requested one.
Original commit message from CVS:
* ext/mad/gstid3tag.c: (gst_id3_tag_src_link):
* ext/mad/gstmad.c: (gst_mad_chain):
RPAD_ -> PAD
Fix args in bufferalloc function call.
Makes the mad plugin compile again
Original commit message from CVS:
2005-06-02 Andy Wingo <wingo@pobox.com>
* ext/mad/gstid3tag.c: Finish porting to 0.9: no more gstdata,
check for link functions before calling them, give
gst_message_new_tag its own copy of the tag list, set the parser
state before sending the event (because in 0.9 events are
processed immediately), casting fixes.
* ext/mad/Makefile.am (libgstmad_la_LDFLAGS): Link with
gsttagedit.
Original commit message from CVS:
* ext/mad/gstmad.c: (gst_mad_chain), (gst_mad_change_state):
* ext/sidplay/gstsiddec.cc:
* gst/alpha/gstalpha.c: (gst_alpha_chain):
* gst/goom/gstgoom.c: (gst_goom_chain):
No need to take the lock anymore, core already did
that before calling us.
Original commit message from CVS:
* Makefile.am:
* ext/Makefile.am:
* sys/Makefile.am:
Make my automake version shut up about undefined variables
* gst/goom/gstgoom.c:
GstAdapter moved to base objects.
Original commit message from CVS:
* ext/mad/gstmad.c: (gst_mad_init), (gst_mad_src_query),
(index_seek), (normal_seek), (gst_mad_sink_event):
Port to new query API and replace gst_pad_convert()
and gst_pad_get_formats() usage. gstid3tag looks like
it needs some more love before it will work again, if
not a rewrite.
Original commit message from CVS:
Fixed a few things to enable the mad and effectv to be able to find the headers in the gst-plugins-base/gst-libs and to link against the libs in there.
Original commit message from CVS:
Don't send 'Hey! You gave me a NULL pointer yo naughty person' as error message when we can't open the DVD device; send something more useful instead (fixes#167117)
Original commit message from CVS:
* configure.ac: Pull in librfb from my CVS tree, because it is
too small and annoying to be separate. Move rfbsrc plugin
to gst/.
* ext/Makefile.am:
* ext/librfb/Makefile.am:
* ext/librfb/gstrfbsrc.c:
* gst/librfb/Makefile.am:
* gst/librfb/gstrfbsrc.c:
* gst/librfb/rfb.c:
* gst/librfb/rfb.h:
* gst/librfb/rfbbuffer.c:
* gst/librfb/rfbbuffer.h:
* gst/librfb/rfbbytestream.c:
* gst/librfb/rfbbytestream.h:
* gst/librfb/rfbcontext.h:
* gst/librfb/rfbdecoder.c:
* gst/librfb/rfbdecoder.h:
* gst/librfb/rfbutil.h:
Original commit message from CVS:
* ext/mpeg2dec/gstmpeg2dec.c: (gst_mpeg2dec_open_decoder),
(gst_mpeg2dec_reset), (free_all_buffers),
(gst_mpeg2dec_alloc_buffer), (handle_sequence):
* ext/mpeg2dec/gstmpeg2dec.h:
The libmpeg2 user-allocated buffer management is awkward,
to say the least. Hopefully this fixes things.
Original commit message from CVS:
* ext/mpeg2dec/gstmpeg2dec.c: (gst_mpeg2dec_init),
(gst_mpeg2dec_close_decoder), (put_buffer), (check_buffer),
(free_buffer), (free_all_buffers), (gst_mpeg2dec_alloc_buffer),
(handle_sequence), (handle_picture):
* ext/mpeg2dec/gstmpeg2dec.h:
Rearrange buffer tracking and refcounting and refactor
a little for readability.
Original commit message from CVS:
* ext/mpeg2dec/gstmpeg2dec.c:
Don't send things to NULL PAD_PEERs
* gst/deinterlace/gstdeinterlace.c: (gst_deinterlace_chain):
Copy-on-write the incoming buffer.
* gst/mpegstream/gstdvddemux.h:
* gst/mpegstream/gstmpegclock.h:
* gst/mpegstream/gstmpegdemux.c: (gst_mpeg_demux_parse_syshead),
(normal_seek), (gst_mpeg_demux_handle_src_event):
* gst/mpegstream/gstmpegdemux.h:
* gst/mpegstream/gstmpegpacketize.h:
* gst/mpegstream/gstmpegparse.c:
(gst_mpeg_parse_update_streaminfo), (gst_mpeg_parse_reset),
(gst_mpeg_parse_handle_discont), (gst_mpeg_parse_parse_packhead),
(gst_mpeg_parse_loop), (gst_mpeg_parse_get_rate),
(gst_mpeg_parse_convert_src), (gst_mpeg_parse_handle_src_query),
(gst_mpeg_parse_handle_src_event), (gst_mpeg_parse_change_state):
* gst/mpegstream/gstmpegparse.h:
* gst/mpegstream/gstrfc2250enc.h:
Various changes to the way time is computed that make seeking and
total time estimation much better here.
Use G_BEGIN/END_DECLS instead of __cplusplus
* gst/videocrop/gstvideocrop.c: (gst_video_crop_chain):
Use gst_buffer_stamp instead of only copying the TIMESTAMP
Original commit message from CVS:
* ext/mad/Makefile.am:
* ext/mad/gstid3demuxbin.c: (gst_id3demux_bin_get_type),
(gst_id3demux_bin_base_init), (gst_id3demux_bin_class_init),
(gst_id3demux_bin_init), (gst_id3demux_bin_remove_pad),
(found_type), (gst_id3demux_bin_change_state):
* ext/mad/gstid3tag.c: (gst_id3_tag_add_src_pad),
(gst_id3_tag_init), (gst_id3_tag_handle_event),
(gst_id3_tag_src_link), (gst_id3_tag_chain),
(gst_id3_tag_change_state), (plugin_init):
* ext/mad/gstmad.h:
Add id3demuxbin (which is a simple bin consisting of id3demux
and typefind), take over rank from id3demux, remove typefind
code from id3demux. Makes all broken mp3s that I know of work,
and thereby fixes#152688.
Original commit message from CVS:
Reviewed by: Ronald S. Bultje <rbultje@ronald.bitfreak.net>
* ext/mad/gstmad.c: (gst_mad_src_event):
* gst/avi/gstavidemux.c: (gst_avi_demux_handle_src_event):
Allow seeks on audio pad, make mad forward those (#164826).
* gst/audioscale/gstaudioscale.c: (gst_audioscale_chain):
Set duration (#165335).
Original commit message from CVS:
Check environment variables GST_ID3V2_TAG_ENCODING,
GST_ID3_TAG_ENCODING and GST_TAG_ENCODING for a colon-separated
list of character encodings to force interpretation of non-unicode
strings stored in an ID3v2 tag to a particular encoding. If none
is specified, try to use current locale's encoding, then fall back
to ISO-8859-1 (which will always succeed). (Resolves#149274)
Check environment variables GST_ID3V1_TAG_ENCODING,
GST_ID3_TAG_ENCODING and GST_TAG_ENCODING for a colon-separated
list of character encodings to use in case a string encountered
in an ID3v1 tag is not valid UTF-8 already. If no encoding is
specified, try to use the current locale's encoding, then fall
back to ISO-8859-1 (which will always succeed).
Original commit message from CVS:
* ext/mad/gstmad.c: (gst_mad_check_caps_reset), (gst_mad_chain):
- on half framerate, compute the rate in advance so the comparisons
don't compare wrong values
- don't use mad_synth/frame_mute anymore, this mirrors mad_decoder
behaviour
- don't use mad_header_decode anymore, mad_frame_decode does that
automatically
- when getting rid of consumed bytes, reset the stream's skiplen
(fixes#163867)
Original commit message from CVS:
* ext/a52dec/gsta52dec.c: (gst_a52dec_push),
(gst_a52dec_handle_event), (gst_a52dec_chain):
Add some debug output. Check that a discont has a valid
time associated.
* ext/alsa/gstalsasink.c: (gst_alsa_sink_check_event),
(gst_alsa_sink_loop):
Ignore TAG events. A little extra debug for broken timestamps.
* ext/dvdnav/dvdnavsrc.c: (dvdnavsrc_init), (dvdnavsrc_loop),
(dvdnavsrc_change_state):
Ensure we send a discont to engage the link before we send any
other events.
* ext/dvdread/dvdreadsrc.c: (dvdreadsrc_init),
(dvdreadsrc_finalize), (_close), (_open), (_seek_title),
(_seek_chapter), (seek_sector), (dvdreadsrc_get),
(dvdreadsrc_uri_get_uri), (dvdreadsrc_uri_set_uri):
Handle URI of the form dvd://title[,chapter[,angle]]. Currently only
dvd://title works in totem because typefinding sends a seek that ends
up going back to chapter 1 regardless.
* ext/mpeg2dec/gstmpeg2dec.c:
* ext/mpeg2dec/gstmpeg2dec.h:
Output correct timestamps and handle disconts.
* ext/ogg/gstoggdemux.c: (get_relative):
Small guard against a null dereference.
* ext/pango/gsttextoverlay.c: (gst_textoverlay_finalize),
(gst_textoverlay_set_property):
Free memory when done. Don't call gst_event_filler_get_duration on
EOS events. Use GST_LOG and GST_WARNING instead of g_message and
g_warning.
* ext/smoothwave/gstsmoothwave.c: (gst_smoothwave_init),
(draw_line), (gst_smoothwave_dispose), (gst_sw_sinklink),
(gst_sw_srclink), (gst_smoothwave_chain):
Draw solid lines, prettier colours.
* gst/mpeg2sub/gstmpeg2subt.c: (gst_mpeg2subt_init):
Add a default palette that'll work for some movies.
* gst/mpegstream/gstdvddemux.c: (gst_dvd_demux_init),
(gst_dvd_demux_handle_dvd_event), (gst_dvd_demux_send_discont),
(gst_dvd_demux_send_subbuffer), (gst_dvd_demux_reset):
* gst/mpegstream/gstdvddemux.h:
* gst/mpegstream/gstmpegdemux.c: (gst_mpeg_demux_send_discont),
(gst_mpeg_demux_parse_syshead), (gst_mpeg_demux_parse_pes):
* gst/mpegstream/gstmpegparse.c: (gst_mpeg_parse_init),
(gst_mpeg_parse_handle_discont), (gst_mpeg_parse_parse_packhead):
* gst/mpegstream/gstmpegparse.h:
Use PTM/NAV events when for timestamp adjustment when connected to
dvdnavsrc. Don't use many discont events where one suffices.
* gst/playback/gstplaybasebin.c: (group_destroy),
(gen_preroll_element), (gst_play_base_bin_add_element):
* gst/playback/gstplaybasebin.h:
Make sure we remove subtitles from the same bin we put them in.
* gst/subparse/gstsubparse.c: (convert_encoding), (parse_subrip),
(gst_subparse_buffer_format_autodetect),
(gst_subparse_change_state):
Fix some memleaks and invalid accesses.
* gst/typefind/gsttypefindfunctions.c: (ogganx_type_find),
(oggskel_type_find), (cmml_type_find), (plugin_init):
Some typefind functions for Annodex v3.0 files
* gst/wavparse/gstwavparse.h:
GstRiffReadClass is the correct parent class.
Original commit message from CVS:
* ext/mad/gstmad.c: (gst_mad_check_caps_reset), (gst_mad_chain):
Fail if caps negotiation fails. Should fix#162184, and should
definately be in there regardless of it fixing the actual bug.
* gst/avi/gstavimux.c: (gst_avimux_get_type), (gst_avimux_init),
(gst_avimux_write_tag), (gst_avimux_riff_get_avi_header),
(gst_avimux_riff_get_avix_header),
(gst_avimux_riff_get_video_header),
(gst_avimux_riff_get_audio_header), (gst_avimux_write_index),
(gst_avimux_start_file), (gst_avimux_handle_event),
(gst_avimux_change_state):
* gst/avi/gstavimux.h:
Refactor structure writing to use GST_WRITE_UINT macros, add
metadata writing support.
Original commit message from CVS:
Use NULL for an empty GList instead of g_list_alloc(); fix memory leaks; s/LCPM/LPCM/; use g_strdup_printf() instead of GString (easier to bulk free later)
Original commit message from CVS:
Reviewed by: Ronald S. Bultje <rbultje@ronald.bitfreak.net>
* ext/mpeg2dec/gstmpeg2dec.c: (crop_buffer),
(gst_mpeg2dec_alloc_buffer):
* ext/mpeg2dec/gstmpeg2dec.h:
Crop if decoding size is not the actual image size (#163676).
Original commit message from CVS:
* ext/dvdread/stream_labels.c: new file
* ext/dvdread/stream_labels.h: new file
* ext/dvdread/Makefile.am:
* ext/dvdread/dvdreadsrc.c: (_seek_title):
Extract audio stream label from DVD IFO files.
It only dump them on the console for now, still have to
make playbin aware of them.
Original commit message from CVS:
Reviewed by: Ronald S. Bultje <rbultje@ronald.bitfreak.net>
* ext/mad/gstmad.c: (gst_mad_chain):
Don't call mad_stream_sync() directly after recovering sync.
Fixes#151661.
Original commit message from CVS:
* configure.ac:
Fix indentation, fix v4l2 plugin detection.
* ext/Makefile.am:
Fix libmms location (Maciej, use diff -u!).
* ext/alsa/gstalsa.c: (gst_alsa_init):
Initialize caps cache to NULL.
* gst/playback/gstplaybin.c: (gst_play_bin_change_state):
Only change state on audiosink if it exists.
Original commit message from CVS:
* configure.ac: add audioresample and cairo plugins. Remove
HAVE_MMX stuff, because it's not used.
* ext/Makefile.am: same
* ext/audioresample/Makefile.am: You are not ready for an
audio resampling element based on audioresample.
* ext/audioresample/gstaudioresample.c:
* ext/audioresample/gstaudioresample.h:
* ext/cairo/Makefile.am: You are not ready for overlay elements
based on cairo. Don't look too closely, these elements kinda
suck right now.
* ext/cairo/gstcairo.c: new
* ext/cairo/gsttextoverlay.c: new
* ext/cairo/gsttextoverlay.h: new
* ext/cairo/gsttimeoverlay.c: new
* ext/cairo/gsttimeoverlay.h: new
* gst-libs/gst/media-info/media-info-priv.h: fix compile
problem with compilers that don't support variadic macros.
Original commit message from CVS:
* ext/cdparanoia/gstcdparanoia.c: (cdparanoia_class_init),
(cdparanoia_set_property), (cdparanoia_get_property):
* ext/dvdnav/dvdnavsrc.c: (dvdnavsrc_class_init),
(dvdnavsrc_set_property), (dvdnavsrc_get_property):
* ext/dvdread/dvdreadsrc.c: (dvdreadsrc_class_init),
(dvdreadsrc_init), (dvdreadsrc_set_property),
(dvdreadsrc_get_property):
* sys/vcd/vcdsrc.c: (gst_vcdsrc_class_init),
(gst_vcdsrc_set_property), (gst_vcdsrc_get_property):
Synchronize property names where not yet the case. Devices are
now device=X, other versions are deprecated (but still exist).
Also use g_free() unconditionally.
* gst/playback/gstplaybasebin.c: (gst_play_base_bin_class_init),
(setup_source), (gst_play_base_bin_get_property):
Expose source.
Original commit message from CVS:
* ext/a52dec/gsta52dec.c: (gst_a52dec_init),
(gst_a52dec_handle_event), (gst_a52dec_update_streaminfo),
(gst_a52dec_handle_frame), (gst_a52dec_chain),
(gst_a52dec_change_state), (plugin_init):
* ext/a52dec/gsta52dec.h:
Do something useful with timestamps. Make chain-based (since
there's really no reason to be loopbased).
* gst/avi/gstavidemux.c: (gst_avi_demux_process_next_entry):
Update current_byte/frame correctly.
Original commit message from CVS:
* ext/a52dec/gsta52dec.c: (gst_a52dec_loop),
(gst_a52dec_change_state):
Don't do sample adjusting anymore, we use float audio now.
* gst/audioconvert/gstaudioconvert.c: (gst_audio_convert_fixate):
Don't fixate to non-existing properties.
Original commit message from CVS:
* ext/mad/gstmad.c: (gst_mad_check_caps_reset), (gst_mad_chain):
Decoding the header first fixes some problems in resyncing
in more mp3s.
Original commit message from CVS:
* ext/mad/gstid3tag.c: (gst_id3_tag_chain):
reset v1 tag offset when there is no v1 tag. Fixes id3demux always
consuming the last 128 bytes, even though it was valid mp3 data.
Original commit message from CVS:
Reviewed by: Ronald S. Bultje <rbultje@ronald.bitfreak.net>
* ext/dvdread/dvdreadsrc.c: (_read):
Make titles > 0 work again (fixes#154834).
Original commit message from CVS:
* ext/dvdread/dvdreadsrc.c: (dvdreadsrc_class_init),
(dvdreadsrc_init), (dvdreadsrc_dispose), (dvdreadsrc_set_property),
(dvdreadsrc_get_property), (_open), (_seek), (_read),
(dvdreadsrc_get), (dvdreadsrc_open_file),
(dvdreadsrc_change_state):
Fix. Don't do one big huge loop around the whole DVD, that will
cache all data and thus eat sizeof(dvd) (several GB) before we
see something.
* gst-libs/gst/riff/riff-read.c: (gst_riff_read_seek):
Actually NULL'ify event after using it.
* gst/matroska/ebml-read.c: (gst_ebml_read_use_event),
(gst_ebml_read_handle_event), (gst_ebml_read_element_id),
(gst_ebml_read_element_length), (gst_ebml_read_element_data),
(gst_ebml_read_seek), (gst_ebml_read_skip):
Handle events.
* gst/mpegstream/gstdvddemux.c: (gst_dvd_demux_base_init),
(gst_dvd_demux_init), (gst_dvd_demux_get_audio_stream),
(gst_dvd_demux_get_subpicture_stream), (gst_dvd_demux_plugin_init):
Fix timing (this will probably break if I seek using menus, but
I didn't get there yet). VOBs and normal DVDs should now work.
Add a mpeg2-only pad with high rank so this get autoplugged for
MPEG-2 movies.
* gst/mpegstream/gstmpegdemux.c: (gst_mpeg_demux_base_init),
(gst_mpeg_demux_class_init), (gst_mpeg_demux_init),
(gst_mpeg_demux_new_output_pad), (gst_mpeg_demux_get_video_stream),
(gst_mpeg_demux_get_audio_stream),
(gst_mpeg_demux_get_private_stream), (gst_mpeg_demux_parse_packet),
(gst_mpeg_demux_parse_pes), (gst_mpeg_demux_plugin_init):
Use this as second rank for MPEG-1 and MPEG-2. Still use this for
MPEG-1 but use dvddemux for MPEG-2.
* gst/mpegstream/gstmpegparse.c: (gst_mpeg_parse_class_init),
(gst_mpeg_parse_init), (gst_mpeg_parse_new_pad),
(gst_mpeg_parse_parse_packhead):
Timing. Only add pad template if it exists. Add sink template from
class and not from ourselves. This means we will always use the
correct sink template even if it is not the one defined in this
file.
Original commit message from CVS:
* ext/mad/gstmad.c: (gst_mad_check_caps_reset),
(gst_mad_change_state):
Allow for mp3 rate/channels changes. However, only very
conservatively. Reason that we *have* to enable this is smiply
because the mad find_sync() function is not good enough, it will
regularly sync on random data as valid frames and therefore make
us provide random caps as *final* caps of the stream. The best fix
I could think of is to simply require several of the same stream
changes in a row before we change caps.
The actual testcase that works now is #
* ext/ogg/Makefile.am:
* ext/ogg/gstogg.c: (plugin_init):
* ext/ogg/gstogmparse.c:
OGM support (video only for now; I need an audio sample file).
* gst/asfdemux/gstasfdemux.c: (gst_asf_demux_base_init),
(gst_asf_demux_process_stream), (gst_asf_demux_video_caps),
(gst_asf_demux_add_video_stream):
WMV extradata.
* gst/playback/gstplaybasebin.c: (unknown_type):
Don't error out on single unknown-types after all. It's wrong.
If we found type of video and audio but not of a subtitle stream,
it will still error out (which is unwanted). Will find a better fix
later on.
* gst/typefind/gsttypefindfunctions.c: (ogmvideo_type_find),
(ogmaudio_type_find), (plugin_init):
OGM support.
Original commit message from CVS:
* Trying to correct the GST_CHECK_CONFIGPROG macro. It works perfectly for
I hope i dont break anything.
* Shifting the MAS plugin back from gst-rotten.
Original commit message from CVS:
2004-08-26 Zaheer Abbas Merali <zaheerabbas at merali dot org>
* ext/lame/gstlame.c: (gst_lame_init), (gst_lame_chain):
* ext/lame/gstlame.h:
Added new media support to lame
Original commit message from CVS:
2004-08-19 Zaheer Abbas Merali <zaheerabbas at merali dot org>
* configure.ac:
* ext/lame/Makefile.am:
* ext/lame/gstlame.c: (gst_lame_class_init),
(gst_lame_set_property), (gst_lame_get_property), (gst_lame_setup):
Only enable lame presets if version of lame has presets in API
Original commit message from CVS:
2004-08-15 Zaheer Abbas Merali <zaheerabbas at merali dot org>
* ext/lame/gstlame.c: (gst_lame_vbrmode_get_type),
(gst_lame_preset_get_type), (gst_lame_class_init):
describe the enum values for vbr mode and presets more verbosely
Original commit message from CVS:
2004-08-13 Zaheer Abbas Merali <zaheerabbas at merali dot org>
* ext/lame/gstlame.c: (gst_lame_mode_get_type),
(gst_lame_quality_get_type), (gst_lame_padding_get_type),
(gst_lame_preset_get_type), (gst_lame_class_init), (gst_lame_init),
(gst_lame_set_property), (gst_lame_get_property), (gst_lame_setup):
* ext/lame/gstlame.h:
add preset property to lame so it can use lame presets
Original commit message from CVS:
2004-08-13 Zaheer Abbas Merali <zaheerabbas at merali dot org>
* ext/lame/gstlame.c: (gst_lame_vbrmode_get_type),
(gst_lame_class_init), (gst_lame_src_getcaps),
(gst_lame_sink_link), (gst_lame_init), (gst_lame_set_property),
(gst_lame_get_property), (gst_lame_setup):
* ext/lame/gstlame.h:
fix lame's broken vbr stuff, allow it to resample if need be, and also
make xing header optional
Original commit message from CVS:
2004-08-12 Zaheer Abbas Merali <zaheerabbas at merali dot org>
* ext/lame/gstlame.c: (gst_lame_src_getcaps), (gst_lame_init):
added getcaps function so samplerate doesntget fixated to silly values
Original commit message from CVS:
2004-08-12 Zaheer Abbas Merali <zaheerabbas at merali dot org>
* ext/lame/gstlame.c: (gst_lame_src_link):
revert previous fix
Original commit message from CVS:
2004-08-12 Zaheer Abbas Merali <zaheerabbas at merali dot org>
* ext/lame/gstlame.c: (gst_lame_src_link):
made source pad link function check if sinkpad is ok..fixes the problem
where core fixates the output rate of lame stupidly
Original commit message from CVS:
2004-08-12 Zaheer Abbas Merali <zaheerabbas at merali dot org>
* ext/lame/gstlame.c: (gst_lame_class_init), (gst_lame_init):
set default compression ratio paramter to 0.0 so bitrate parameter
works :)
Original commit message from CVS:
2004-07-28 Zaheer Abbas Merali <zaheerabbas at merali dot org>
* ext/lame/gstlame.c: (gst_lame_chain): send tag events downstream
* ext/shout2/gstshout2.c: (gst_shout2send_protocol_get_type),
(gst_shout2send_get_type), (gst_shout2send_set_clock),
(gst_shout2send_class_init), (gst_shout2send_init),
(set_shout_metadata), (gst_shout2send_set_metadata),
(gst_shout2send_chain), (gst_shout2send_set_property),
(gst_shout2send_get_property), (gst_shout2send_connect),
(gst_shout2send_change_state):
* ext/shout2/gstshout2.h:
- fix for sending mp3 audio to icecast2 server, if pad link function not
called before PAUSED state
- added option to use GStreamer clock sync (as opposed to libshout's own sync)
- added tagging support for mp3 audio broadcasted
* gst/monoscope/gstmonoscope.c: (gst_monoscope_class_init):
debug info
Original commit message from CVS:
* ext/dvdnav/README:
Update the README to use dvddemux
* ext/gdk_pixbuf/pixbufscale.c: (gst_pixbufscale_getcaps):
Ensure getcaps returns a subset of the template caps
* gst/mpeg2sub/gstmpeg2subt.c: (gst_mpeg2subt_base_init),
(gst_mpeg2subt_init):
Ensure getcaps returns a subset of the template caps
* gst/mpegstream/gstdvddemux.c: (gst_dvd_demux_class_init),
(gst_dvd_demux_init), (gst_dvd_demux_get_video_stream),
(gst_dvd_demux_get_subpicture_stream),
(gst_dvd_demux_send_subbuffer), (gst_dvd_demux_set_cur_subpicture):
* gst/mpegstream/gstdvddemux.h:
Set the explicit caps on the current_video pad before pushing
anything
* gst/mpegstream/gstmpegdemux.c: (gst_mpeg_demux_get_video_stream),
(gst_mpeg_demux_get_audio_stream):
Free caps used to gst_pad_set_explicit_caps, which takes a const
GstCaps *
Original commit message from CVS:
* ext/lame/gstlame.c: (gst_lame_sink_link), (gst_lame_init),
(gst_lame_chain), (gst_lame_setup), (gst_lame_change_state),
(plugin_init):
add debugging category, add error checks like checking return values
of setup calls, make sure it still works after
PLAYING=>NULL=>PLAYING, fix encoding of mono streams
Original commit message from CVS:
* ext/dvdnav/gst-dvd: Grab the gconf key from the right spot
* gst/debug/gstnavseek.c: (gst_navseek_init),
(gst_navseek_segseek), (gst_navseek_handle_src_event),
(gst_navseek_chain):
* gst/debug/gstnavseek.h: Add 's', 'e' and 'l' keypresses to navseek
to define the start,end and loop parameters of a segment seek.
* gst/videotestsrc/gstvideotestsrc.c: (gst_videotestsrc_init),
(gst_videotestsrc_get_event_masks),
(gst_videotestsrc_handle_src_event), (gst_videotestsrc_get):
* gst/videotestsrc/gstvideotestsrc.h:
Add seeking support to videotestsrc
Initialise the timestamp_offset variable.
Original commit message from CVS:
* ext/alsa/gstalsa.c: (gst_alsa_samples_to_timestamp):
cast to GstClockTime to get higher granularity
* ext/alsa/gstalsasink.c: (gst_alsa_sink_check_event):
use gst_element_set_time_delay to get the exact time
* ext/mad/gstmad.c: (gst_mad_chain):
use the negotiated rate instead of the current frame's rate which
might be wrong because of bit errors. This avoids emitting totally
bogus timestamps and screwing sync.
(fixes#143454)
Original commit message from CVS:
* ext/mad/gstid3tag.c: (gst_id3_tag_handle_event):
forward correctly transformed offset in discont events. Based on
patch by Arwed v. Merkatz. (fixes#142851)
Original commit message from CVS:
* ext/mad/gstid3tag.c: (gst_id3_tag_get_type),
(gst_id3_tag_class_init), (gst_id3_tag_init),
(gst_id3_tag_set_property), (gst_id3_tag_get_tag_to_render),
(gst_id3_tag_handle_event), (gst_id3_tag_do_caps_nego),
(gst_id3_tag_send_tag_event):
lots of fixes to make id3mux work and id3demux work correctly
Original commit message from CVS:
* ext/Makefile.am:
add rules to build shout2send (was removed by accident
when this module was no more marked experimental/broken)
* ext/shout2/gstshout2.c:
* ext/shout2/gstshout2.h:
adding a "connection problem" signal to shout2send
(fixes#142954)
Original commit message from CVS:
second batch :
remove ',' at end of enums as they could confuse older gcc, foreign compilers (forte) and gtk-doc
(in gst-plugins/ext/ this time)
Original commit message from CVS:
* ext/mad/gstmad.c: (gst_mad_handle_event):
Fix for when the first format in a discont event is not a
byte-based one. Should fix#137710.
Original commit message from CVS:
* autogen.sh:
* configure.ac:
* ext/mad/gstid3tag.c: (gst_id3_tag_chain):
compute offsets correctly for internal buffers so timestamps are set
correctly when we can't seek. Also handle cases where there are no
offsets. (based on a patch by David Moore, fixes#142507)
Original commit message from CVS:
* ext/mad/gstid3tag.c : move from "Codec/(Dem/M)uxer" to "Codec/(Dem/M)uxer/Audio"
* gst/wavenc/gstwavenc.c : move from "Codec/Encoder/Audio" to "Codec/Muxer/Audio"
* gst/auparse/gstauparse.c :
- add code (commented for now) to support audio/x-adpcm on src pad
(we have no decoder for those layout yet)
* gst/cdxaparse/gstcdxaparse.c :
* gst/cdxaparse/gstcdxaparse.h :
- partial rewrite using RiffRead (ripped iain's wavparse code)
* gst/rtp/gstrtpL16enc.c : typo
* gst/rtp/gstrtpgsmenc.c : typo
Original commit message from CVS:
* ext/a52dec/gsta52dec.c : mark audio/a52, audio/ac3 as deprecated in a comment
* gst/ac3parse/gstac3parse.c : audio/ac3 => audio/x-ac3
* gst/realmedia/rmdemux.c : audio/a52 => audio/x-ac3
Original commit message from CVS:
* ext/dv/gstdvdec.c: (gst_dvdec_video_link):
Fix caps nego and pad templates. RGB mode caps should
work now.
* ext/dvdnav/gst-dvd:
Move mpeg2dec inside the thread because otherwise the
queue rejects cap changes mid-stream
* ext/mpeg2dec/gstmpeg2dec.c: (gst_mpeg2dec_get_type),
(gst_mpeg2dec_flush_decoder):
For mpeg2dec > 0.4.0, call the flush function instead of
manually extracting all in-flight frames.
* ext/raw1394/gstdv1394src.c: (gst_dv1394src_factory),
(gst_dv1394src_init), (gst_dv1394src_iso_receive):
Change mime type video/dv go video/x-dv to match the
rest of gst-plugins
Original commit message from CVS:
* ext/mpeg2dec/gstmpeg2dec.c: (src_templ),
(gst_mpeg2dec_base_init), (gst_mpeg2dec_init),
(gst_mpeg2dec_negotiate_format):
* ext/mpeg2dec/gstmpeg2dec.h:
removed the static pad template so that we can add the
more accurate framerate value to the caps.
Original commit message from CVS:
* configure.ac:
* ext/Makefile.am:
* ext/libvisual/Makefile.am:
* ext/libvisual/visual.c:
add initial support for libvisual (http://libvisual.sourceforge.net)
libvisual is still quite alpha, so expect crashes in there :)
