Original commit message from CVS:
* gst/gstobject.c: (gst_object_class_init):
Fix signal signature.
* gst/gstsegment.c:
Add small clarification in the api docs.
* plugins/elements/gstfilesrc.c: (gst_file_src_set_location):
States are protected with object lock.
Original commit message from CVS:
* gst/gstbin.c: (bin_handle_async_done):
Make sure that the child bin stops after completing the async state
change so that the parent can continue the state change to PLAYING.
Fixes#441159.
Original commit message from CVS:
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_finalize),
(unref_data), (gst_collect_pads_remove_pad),
(gst_collect_pads_check_pads):
Use additional refcounting to avoid crashes when dynamically adding and
removing pads. Fixes#420206.
Original commit message from CVS:
* tools/gst-launch.c: (event_loop):
When buffering goes from a two digit to a single digit number, make sure
to remove the old second digit by writing a blank over it.
Original commit message from CVS:
* tests/check/gst/gstbin.c: (GST_START_TEST):
Allow refcount of 3 and 4 because some state thread might still be busy
with it.
Original commit message from CVS:
* plugins/elements/Makefile.am:
* plugins/elements/gstmultiqueue.h:
* plugins/elements/gstqueue.h:
These are not installed headers, no need for padding.
Original commit message from CVS:
* gst/gstbin.c: (gst_bin_class_init), (gst_bin_get_state_func),
(gst_bin_continue_func):
Enable latency for next release.
Restore STATE_LOCK around recalc_state that was left out during the
rewrite and could result in racy behaviour when _get_state and
recalc_state are run concurrently. See #440463.
Original commit message from CVS:
* tests/check/gst/gstsystemclock.c: (store_callback),
(GST_START_TEST):
Improve test_async_order to also work when both timers are already
expired when we get scheduled to check it.
Original commit message from CVS:
* gst/gstbin.c: (gst_bin_init), (gst_bin_dispose),
(gst_bin_set_property), (gst_bin_get_property),
(gst_bin_remove_func), (gst_bin_handle_message_func):
* gst/gstbin.h:
'private' is a c++ keyword, let's not use that in header files,
otherwise c++ compilers will throw a tantrum.
Original commit message from CVS:
* plugins/elements/gstelements.c:
* plugins/elements/gstfilesink.c: (gst_file_sink_do_seek),
(gst_file_sink_get_current_offset):
* plugins/indexers/gstindexers.c: (plugin_init):
Use #ifdef for HAVE_XYZ for consistency.
* tests/check/Makefile.am:
* tests/check/elements/.cvsignore:
* tests/check/elements/filesink.c: (setup_filesink),
(cleanup_filesink), (GST_START_TEST), (filesink_suite):
Add some unit tests for filesink.
Original commit message from CVS:
Patch by: Mark Nauwelaerts <manauw at skynet be>
* plugins/elements/gstfilesink.c: (gst_file_sink_open_file),
(gst_file_sink_query), (gst_file_sink_do_seek),
(gst_file_sink_get_current_offset), (gst_file_sink_render):
* plugins/elements/gstfilesink.h:
Fix position reporting; rename data_written member to current_pos to
reflect its real meaning (fixes#412648).
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
* gst/gstbin.c: (gst_bin_class_init), (gst_bin_init),
(gst_bin_dispose), (gst_bin_set_property), (gst_bin_get_property),
(gst_bin_remove_func), (gst_bin_handle_message_func):
* gst/gstbin.h:
Add a property for bins that handle the state change of their childs.
Fixes#435880
Original commit message from CVS:
* libs/gst/controller/gstinterpolation.c:
Use an array of the correct type when using _get_value_array with
linear interpolation.
Original commit message from CVS:
* libs/gst/controller/gstinterpolation.c:
(interpolate_trigger_get_enum_value_array),
(interpolate_trigger_get_string_value_array):
Add support for retrieving value arrays when using the trigger
interpolation mode.
Original commit message from CVS:
* libs/gst/controller/gstcontroller.c:
(gst_controller_get_value_array):
* libs/gst/controller/gstcontroller.h:
Clarify the docs of gst_controller_get_value_array(): The array where
the values should be written to must be allocated as there seems to be
no way to get the size of a random GType. This doesn't change any
behaviour. Also fix some typos all over the place and remove an unused,
commented function that is not necessary as g_object_set() could be
used instead.
* tests/check/libs/controller.c: (GST_START_TEST),
(gst_controller_suite):
Add unit test for gst_controller_get_value_array().
Original commit message from CVS:
* tests/check/gst/gstbuffer.c: (GST_START_TEST):
Disable part of the gst_buffer_try_new_and_alloc test, because
it can happily succeed on 64-bit systems where there's more address
space available.
Original commit message from CVS:
* tests/check/gst/gstpad.c: (GST_START_TEST), (gst_pad_suite):
Add unit test for the improved caps checking from bug #421543.
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_get_caps_unlocked),
(gst_pad_acceptcaps_default), (gst_pad_configure_sink),
(gst_pad_configure_src):
Added simple version of improved caps checking. It was previously
assumed that a setcaps function would check the validity of the caps but
people prefer us to check caps against the template automatically.
Fixes#421543.
Original commit message from CVS:
* plugins/elements/gstqueue.c: (gst_queue_loop):
Hello, I am Mr Taymans' personal debugger. Today I will introduce a fix
for the subtle art of warning a potentially blocking thread that it
should check the source pad return value, and relay the information
upstream.
Original commit message from CVS:
reviewed by: Stefan Kost <ensonic@users.sf.net>
* libs/gst/controller/gstcontroller.c:
(gst_controller_suggest_next_sync), (gst_controller_sync_values),
(_gst_controller_get_property), (_gst_controller_set_property),
(_gst_controller_init), (_gst_controller_class_init):
* libs/gst/controller/gstcontroller.h:
* libs/gst/controller/gsthelper.c: (gst_object_suggest_next_sync),
(gst_object_get_control_rate), (gst_object_set_control_rate):
API: gst_controller_suggest_next_sync(), gst_object_suggest_next_sync()
Add API that provides sync suggestion timestamps for elements that
call gst_object_sync_values() from which those elements can subdivide
their processing loop to get the best results for the controlled
properties. For now it just suggests last_sync + control_rate as
new timestamp but this will be improved in the future.
While doing that change the control-rate property to a GstClockTime
from guint and change it's meaning from samples to nanoseconds as
the GstController doesn't know anything about sampling rate. Strictly
speaking this breaks ABI but as the control-rate property didn't do
anything in the past and as such couldn't be used this should be no
problem.
Original commit message from CVS:
reviewed by: Stefan Kost <ensonic@users.sf.net>
* libs/gst/controller/gstcontroller.c: (gst_controller_unset),
(gst_controller_unset_all):
* libs/gst/controller/gstcontrollerprivate.h:
* libs/gst/controller/gstinterpolation.c:
(gst_controlled_property_find_control_point_node):
Save last synced value from the list to continue searching from there
in future syncs. This speeds everything up a bit.
Original commit message from CVS:
reviewed by: Stefan Kost <ensonic@users.sf.net>
* libs/gst/controller/gstcontroller.c: (gst_control_point_compare),
(gst_control_point_find), (gst_controlled_property_new),
(gst_control_point_free), (gst_controlled_property_free),
(gst_controller_set), (gst_controller_set_from_list),
(gst_controller_unset), (gst_controller_unset_all),
(gst_controller_sync_values):
* libs/gst/controller/gstcontroller.h:
* libs/gst/controller/gstcontrollerprivate.h:
* libs/gst/controller/gstinterpolation.c:
(gst_controlled_property_find_control_point_node),
(interpolate_none_get), (interpolate_trigger_get):
Add a new private GstControlPoint struct which "inherits" from
GstTimedValue to allow different interpolators to store internal
values next to each control point. From the outside everything is
still a GstControlPoint so we don't loose binary compatibility.
Also fixup all the GValue handling to not leak GValues or list nodes.
* tests/check/libs/controller.c: (GST_START_TEST):
Free the list nodes and GValues in the controller_misc test.
Original commit message from CVS:
* gst/gstplugin.c: (gst_plugin_load_file):
If we fail to load a plugin because of unresolved symbols or missing
libraries and spew a warning to stderr, we may just as well mention
which plugin it was that failed to load.
Original commit message from CVS:
* docs/Makefile.am: the gtk-doc makefile snippet correctly
handles the case when ENABLE_GTK_DOC is false, and installs
the prebuilt documentation. So gtk-doc subdirs are
unconditionally enabled. Fixes: #349099.
Original commit message from CVS:
* gst/gstplugin.c: gst_plugin_register_func() doesn't actually
do anything with the passed "module" parameter, so remove it.
Allows removal of additional vestigal code.
Original commit message from CVS:
* gst/gstplugin.c:
Using sigaction should depend on HAVE_SIGACTION, not HAVE_WIN32.
Switch to using g_stat() because it's more portable.
Original commit message from CVS:
* gst/gst.c:
Add GST_DISABLE_OPTION_PARSING, in order to disable option
parsing for embedded systems.
* gst/gstelementfactory.c:
Allow gst_element_register() to be called with plugin==NULL.
Did nobody notice that static elements were broken?
Original commit message from CVS:
* tools/gst-launch.c: (event_loop):
Give more interesting info when buffering starts and stops.
Fix case where buffering starts but we fail to update the buffering flag
because the target state is not PLAYING.
Original commit message from CVS:
* plugins/elements/gstqueue.c: (gst_queue_init),
(gst_queue_finalize), (update_time_level), (apply_segment),
(apply_buffer), (gst_queue_locked_flush),
(gst_queue_locked_enqueue), (gst_queue_locked_dequeue),
(gst_queue_handle_sink_event), (gst_queue_chain),
(gst_queue_push_one), (gst_queue_loop):
* plugins/elements/gstqueue.h:
Refactor an cleanup queue a bit.
Do better time level calculations that also work when the srcpad is not
yet running.
Remove some unneeded debug lines.
* tests/check/elements/queue.c: (GST_START_TEST), (queue_suite):
Added testcase for time level measurement.
Try to make some stuff more racefree.
Original commit message from CVS:
Patch by: Jeroen Wouters <woutersj at gmail com>
* gst/gsturi.c: (gst_uri_get_protocol), (search_by_entry):
Treat protocol strings in a case-insensitive way (#437563).
Original commit message from CVS:
* gst/gstplugin.c: (gst_plugin_load_file):
* gst/gstregistry.c: (gst_registry_scan_path_level):
Don't print a g_warning for any failure to load a shared object.
Instead, push this down into gstplugin.c, and warn _only_ if we
failed to open the module (i.e. failure to link).
Avoids warnings on normal, working, non-plugin .so files.
Original commit message from CVS:
* gst/gstplugin.c (gst_plugin_load_file):
* gst/gstregistry.c (GST_CAT_DEFAULT,
gst_registry_lookup_feature_locked, gst_registry_scan_path_level):
Print a g_warning if there was an error when loading a plugins during
registry scan. The shuld help beginners starting with gst-plugin
template.
Original commit message from CVS:
* plugins/elements/gstqueue.c: (gst_queue_class_init),
(update_time_level), (gst_queue_locked_flush),
(gst_queue_handle_sink_event), (gst_queue_chain),
(gst_queue_push_one), (gst_queue_loop):
* plugins/elements/gstqueue.h:
Be smarter when calculating the current amount of data in the queue by
measuring the difference between start and end timestamps (in running
time) inside the queue. Fixes#432876.
API: GstQueue::pushing to notify elements that we are pushing data again
since the running signal is rather broken for this purpose.
Original commit message from CVS:
* plugins/elements/gstqueue.c (_do_init, gst_queue_signals,
gst_queue_base_init, gst_queue_init):
use GST_BOILERPLATE
Original commit message from CVS:
* win32/common/libgstreamer.def:
Add new exported functions.
* win32/vs6/grammar.dsp:
Use grammar pre-generated files.
Original commit message from CVS:
Based on patch by: Peter Kjellerstedt <pkj at axis com>
* gst/Makefile.am:
* gst/gstparse.c: (gst_parse_launchv), (gst_parse_launch):
* gst/gstparse.h:
* gst/gstutils.c: (gst_parse_bin_from_description):
* gst/gstutils.h:
Maintain API and ABI when --disable-parse is used. Now that
we have an appropriate error code, we can just return NULL and the
appropriate error when gst_parse_launch() is used despite it having
been disabled (#342564).
* tests/check/Makefile.am:
* tests/check/pipelines/.cvsignore:
* tests/check/pipelines/parse-disabled.c:
Make sure these functions exist and return NULL plus a GError when
--disable-parse is used.
