They previously used the same state but different mechanisms and
functions, which was difficult to follow, error prone and simply
confusing.
Also adjust the test for the post-session timeout a bit to be less racy
now that the timing has slightly changed.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-rtsp-server/-/merge_requests/115>
This is a TCP connection timeout for client connections, in seconds.
If a positive value is set for this property, the client connection
will be kept alive for this amount of seconds after the last session
timeout. For negative values of this property the connection timeout
handling is delegated to the system (just as it was before).
Fixes#83
When removing transports an assertion was that the transports passed in
for removal are present in the list, however that can't be assumed.
As an example if a transport was removed from a thread running
send_tcp_message, the main thread can try to remove the same transport
again if it gets a handle_pause_request. This will not effect the
transport list but it will effect n_tcp_transports as it will be
decrement and then have the wrong value.
When unsuspending and going to PLAYING, unblock all streams instead of
only those that are linked (the linked streams are the ones for which
SETUP has been called). GST_FLOW_NOT_LINKED will be returned when
pushing buffers on unlinked streams.
This change is because playback using single-threaded demuxers like
matroska-demux could be blocked if SETUP was not called for all media.
Demuxers that use GstFlowCombiner (including gstoggdemux, gstavidemux,
gstflvdemux, qtdemux, and matroska-demux) will handle
GST_FLOW_NOT_LINKED automatically.
Fixes#39
Wait on asyn-done when needed in gst_rtsp_media_seek_trickmode.
In the unit test the pause from adjust_play_mode will cause a preroll
and after that async-done will be produced.
Without this patch there are no one consuming this async-done and when
later when seek fluch is done in gst_rtsp_media_seek_trickmode then it
wait for async-done. But then it wrongly find the async-done prodused by
adjus_play_mode and continue executing without waiting for the preroll
to finish.
If RTP Info is missing and it is not a receiver only, eg. audio
backchannel. Then return GST_RTSP_STS_INTERNAL_SERVER_ERROR.
In rfc2326 it says RTP-info is req. but in RFC7826 it is conditional.
Since 1.14 there is audio backchannel support. Thus RTP-info is
conditional now. When audio backchannel only mode, there is no RTP-info.
Fixes#82
Without this patch it's always stream0 that is used to get segment event
that is used to set scale and speed. This even if client not doing SETUP
for stream0. At least in suspend mode reset this not working since then
it's just random if send_rtp_sink have got any segment event. There are
no check if send_rtp_sink for stream0 got any data before media is
prerolled after PLAY request.
GStreamer plays segment from stop to start when doing reverse playback.
RTSP implies that media should be played from start of Range header to
its stop. Hence we swap start and stop times before passing them to
gst_element_seek.
Also make gst_rtsp_stream_query_stop always return value that can be
used as stop time of Range header.
Add support for the RTSP Scale and Speed headers by setting the rate in
the seek to (scale*speed). We then check the resulting segment for rate
and applied rate, and use them as values for the Speed and Scale headers
respectively.
https://bugzilla.gnome.org/show_bug.cgi?id=754575
Add new function gst_rtsp_media_seek_full_with_rate() which allows the
caller to specify the rate for the seek. Also added functions in
rtsp-stream and rtsp-media for retreiving current rate and applied rate.
https://bugzilla.gnome.org/show_bug.cgi?id=754575
Handle the situation when a call to gst_rtsp_media_set_state is done
when media status is preparing.
Also add unit test for this scenario.
The unit test simulate on a media level when two clients share a (live)
media.
Both clients have done SETUP and got responses. Now client 1 is doing
play and client 2 is just closing the connection.
Then without patch there are a problem when
client1 is calling gst_rtsp_media_unsuspend in handle_play_request.
And client2 is doing closing connection we can end up in a call
to gst_rtsp_media_set_state when
priv->status == GST_RTSP_MEDIA_STATUS_PREPARING and all the logic for
shut down media is jumped over .
With this patch and this scenario we wait until
priv->status == GST_RTSP_MEDIA_STATUS_PREPARED and then continue to
execute after that and now we will execute the logic for
shut down media.
By default the multicast sockets are bound to INADDR_ANY,
as it's not allowed to bind sockets to multicast addresses
in Windows. This default behaviour can be changed by setting
bind-mcast-address property on the media-factory object.
https://bugzilla.gnome.org/show_bug.cgi?id=797059
If a (strange) client would reuse interleaved channel numbers in
multiple SETUP requests, we should not accept them. The channel
numbers are used for looking up stream transports in the
priv->transports hash table, and transports disappear from the table
if channel numbers are reused.
RFC 7826 (RTSP 2.0), Section 18.54, clarifies that it is OK for the
server to change the channel numbers suggested by the client.
https://bugzilla.gnome.org/show_bug.cgi?id=796988
When media is shared, the same media stream can be sent
to multiple multicast groups. Currently, there is no API
to retrieve multicast addresses from the stream.
When calling gst_rtsp_stream_get_multicast_address() function,
only the first multicast address is returned.
With this patch, each multicast destination requested in SETUP
will be stored in an internal list (call to
gst_rtsp_stream_add_multicast_client_address()).
The list of multicast groups requested by the clients can be
retrieved by calling gst_rtsp_stream_get_multicast_client_addresses().
There still exist some problems with the current implementation
in the multicast case:
1) The receiving part is currently only configured with
regard to the first multicast client (see
https://bugzilla.gnome.org/show_bug.cgi?id=796917).
2) Secondly, of security reasons, some constraints should be
put on the requested multicast destinations (see
https://bugzilla.gnome.org/show_bug.cgi?id=796916).
Change-Id: I6b060746e472a0734cc2fd828ffe4ea2956733ea
https://bugzilla.gnome.org/show_bug.cgi?id=793441
The maximum ttl value provided so far by the multicast clients
will be chosen and reported in the response to the current
client request.
Change-Id: I5408646e3b5a0a224d907ae215bdea60c4f1905f
https://bugzilla.gnome.org/show_bug.cgi?id=793441
If "transport.client-settings" parameter is set to true, the client is
allowed to specify destination, ports and ttl.
There is no need for pre-configured address pool.
Change-Id: I6ae578fb5164d78e8ec1e2ee82dc4eaacd0912d1
https://bugzilla.gnome.org/show_bug.cgi?id=793441
When two multicast clients request specific transport
configurations, and "transport.client-settings" parameter is
set to true, it's wrong to actually require that these two
clients request the same multicast group.
Removed test_client_multicast_invalid_transport_specific test
cases as they wrongly require that the requested destination
address is supposed to be present in the address pool, also in
the case when "transport.client-settings" parameter is set to true.
Change-Id: I4580182ef35996caf644686d6139f72ec599c9fa
https://bugzilla.gnome.org/show_bug.cgi?id=793441
If "transport.client-settings" parameter is set to true, the client is
allowed to specify destination, ports and ttl.
There is no need for pre-configured address pool.
https://bugzilla.gnome.org/show_bug.cgi?id=793441
If the media is complete, i.e. one or more streams have been configured
with sinks, then we want to query the position on those streams only.
A query on an incomplete stream may return a position that originates from
an earlier preroll.
https://bugzilla.gnome.org/show_bug.cgi?id=794964
This was broken since the work for delayed transport creation
was merged: the creation of the transports string depends on
calling stream_get_server_port, which only starts returning
something meaningful after a call to stream_allocate_udp_sockets
has been made, this function expects a transport that we parse
from the transport string ...
Significant refactoring is in order, but does not look entirely
trivial, for now we put a band aid on and create a second transport
string after the stream has been completed, to pass it in
the request headers instead of the previous, incomplete one.
https://bugzilla.gnome.org/show_bug.cgi?id=794789
The test_record case was working because async=false had
been added in https://bugzilla.gnome.org/show_bug.cgi?id=757488
but that was incorrect, as it should not be needed.
Removing async=false made the test fail as expected, this is
fixed by not trying to preroll when preparing the media for
RECORD, as start_prepare is called upon receiving ANNOUNCE,
and our peer will not start sending media until it has received
a response to that request, and sent and received a response
to RECORD as well, thus obviously preventing preroll.
https://bugzilla.gnome.org/show_bug.cgi?id=793738
