Commit graph

89 commits

Author SHA1 Message Date
Alessandro Decina
40899379c0 rtpjitterbuffer: move some initialization code from change_state to _init.
Set ->active to TRUE in _init so it can be set to FALSE after creating the
jitterbuffer and it won't be mistakenly reset to TRUE in the change_state
function.
This is needed to start the jitterbuffer as inactive when rtpbin is buffering.
2010-05-03 13:34:59 +02:00
Benjamin Otte
cccfeaa59c gst_element_class_set_details => gst_element_class_set_details_simple 2010-03-18 14:32:00 +01:00
Sebastian Dröge
bcd06ea527 rtpjitterbuffer: Reset skew detection after instantiating the jitterbuffer
...not only when going to READY. This sets high_level and friends to
a more useful value.
2010-02-23 17:24:03 +01:00
Tim-Philipp Müller
07fa73f199 docs: add Since: markers for new jitterbuffer properties 2010-02-19 12:13:07 +00:00
Wim Taymans
772eca5aff jitterbuffer: start out active and not buffering
There is no need to set the latency in the jittebuffer in _init, we will set
that later when going to PAUSED.
Set the jitterbuffer active and not buffering when starting.
2010-02-12 17:22:56 +01:00
Wim Taymans
8bbfd94c25 rtpbin: more buffering work
When deactivating jitterbuffers when the buffering starts, keep the current
percent of the jitterbuffer and also set the jitterbuffer in the buffering state
so that we know when it's filled again.
Add property to get the buffering percentage of the jitterbuffer.
2010-02-12 17:22:56 +01:00
Wim Taymans
e6e287cdcc rtpjitterbuffer: adjust latency in buffer mode
When we are in buffer mode, adjust the buffering low/high thresholds based on
the total configured latency. If we don't and there is a huge queue or element
with a big latency downstream we might drain the complete queue immediately and
start buffering again.
2010-02-12 17:22:55 +01:00
Wim Taymans
ab73603031 jitterbuffer: add ts-offset to timestamp
Add the ts-offset to the buffer timestamp to get the final output timestamp of
the buffer.
2010-02-12 17:22:55 +01:00
Wim Taymans
74a3be350d rtpbin: do more accurate buffer offsets
Return the next timestamp in the jitterbuffer.
Use the min-timestamp of the jitterbuffers to calculate an offset so that the
next timestamp is pushed with a timestamp equal to running_time.
Start producing timestamps from 0 in the buffering case too.
2010-02-12 17:22:55 +01:00
Wim Taymans
ecf6ed8fc1 jitterbuffer: keep track of offset
Keep track of an outgoing offset that we add to each outgoing buffer to
compensate for PAUSE when buffering.
Adjust the offset when activating.
2010-02-12 17:22:54 +01:00
Wim Taymans
20a27a545a rtpbin: more buffering updates
Add signal to pause the jitterbuffer. This will be emitted from gstrtpbin when
one of the jitterbuffers is buffering.
Make rtpbin collect the buffering messages and post a new buffering message with
the min value.
Remove the stats callback from jitterbuffer but pass a percent integer to
functions that affect the buffering state of the jitterbuffer. This allows us
then to post buffering messages from outside of the jitterbuffer lock.
2010-02-12 17:22:53 +01:00
Wim Taymans
a5b9d3f917 rtpbin: propagate buffer-mode property
Propagate buffer-mode property to the jitterbuffers.
Intercept BUFFERING messages in rtpbin
2010-02-12 17:22:53 +01:00
Wim Taymans
d3db9574a9 jitterbuffer: do more buffering implementation
Add callback for buffering stats.
Configure the latency in the jitterbuffer instead of passing it with _insert.
Calculate buffering levels when pushing and popping
Post buffering messages.
2010-02-12 17:22:52 +01:00
Wim Taymans
aeacbfed3e jitterbuffer: flesh out buffering mode some more
Add a buffering state to the jitterbuffer and wait until buffering ends before
pushing out packets.
2010-02-12 17:22:52 +01:00
Wim Taymans
56b29c9a6b jitterbuffer: hook up the mode property
Expose a mode property on the jitterbuffer.
Fix the case where timestamps are -1 in the check for outgoing timestamps.
2010-02-12 17:22:52 +01:00
Wim Taymans
99a581215f jitterbuffer: add some more debug info 2010-02-12 13:53:57 +01:00
Wim Taymans
8070ae967b jitterbuffer: avoid using wrong clock-rate
Check for a valid clock-rate before attempting to estimate the npt
stop time.
2009-11-25 10:38:23 -06:00
Wim Taymans
f52859432f jitterbuffer: release lock before emiting signals
Release the jbuf lock before emiting the request-pt-map signal to avoid
deadlocks. We also need to catch the shutdown case when locking again.

Fixes #593354
2009-11-18 10:50:44 +01:00
Stefan Kost
e43eb89449 tests: add a jitterbuffer test
Tests pushing a few buffers in various order and asserting the order sent by the
jitterbuffer. Contains two disabled tests that need more work.
2009-10-22 13:35:57 +03:00
Wim Taymans
8fb77403c5 jitterbuffer: cache latency in nanoseconds
Cache the latency in nanoseconds units to avoid having to convert the
milliseconds value to nanoseconds all the time.
2009-10-01 12:52:40 +02:00
Stefan Kost
0a7ef67ad0 docs: fix gtk-doc warnings 2009-09-10 10:28:48 +03:00
Håvard Graff
40549278c3 jitterbuffer: avoid throwing reordered buffers with same timestamps
When we receive a reordered packet with the same timestamp as the previous one
(which can happen for fragmented packets) don't consider the packet as lost but
instead wait for the reordered packet to arrive.

Switch the warning-level, so that a reordering does not get a warning, only
an actual produced lost-packet.

Fixes #594251
2009-09-08 13:39:31 +02:00
Olivier Crête
f542f710cf rtpjitterbuffer: Lock clock_rate variable
The priv->clock_rate variable could become -1 between when its checked to not
be -1 and when its used, causing an assertion. Fixed by taking the mutex
earlier in the chain() function.

Fixes #593955
2009-09-03 19:17:00 +02:00
Wim Taymans
8d924611e7 jitterbuffer: make sure time does not go backwards
When we construct a timestamp that would result in a timestamp that is earlier
than when the packet was received, reset the skew calculation as this is
probably a sign that the sender restarted or paused.

Fixes #593354
2009-09-01 12:48:28 +02:00
Sebastian Dröge
000a483d31 rtp: Use new gst_iterator_new_single() for the internal linked pads iteration 2009-08-31 08:09:09 +02:00
Sebastian Dröge
c8c02d2c7a jitterbuffer: Use iterate internal links instead of deprecated get internal links 2009-08-31 08:09:08 +02:00
Tim-Philipp Müller
c5793a6a45 Make build without warnings with debugging disabled 2009-08-11 02:30:45 +01:00
Wim Taymans
64046416cc jitterbuffer: prevent overflow in EOS estimation
Use a guint64 instead of a guint to hold a 64bit value to prevent completely
bogues EOS estimation values due to overflows.
2009-08-11 02:30:41 +01:00
Wim Taymans
5ece6ae4e3 jitterbuffer: more estimated EOS fixes
Do more accurate EOS estimate and guard against backward timestamps.
2009-08-11 02:30:41 +01:00
Wim Taymans
cbad89600c jitterbuffer: release lock before pushing EOS
Make sure we release the jitterbuffer lock before we start pushing out data
because else we might deadlock.
2009-08-11 02:30:41 +01:00
Wim Taymans
918c9448f2 rtpbin: add on_npt_stop signal
Add the on_npt_stop signal to rtpbin and rtpjitterbuffer to notify the
application that the NPT stop position has been reached.
2009-08-11 02:30:41 +01:00
Wim Taymans
7f0b100db5 Unlock the jitterbuffer before pushing out the packet-lost events.
Move some code before we do the unlock to make the jitterbuffer state
consistent while we are unlocked.
2009-08-11 02:30:40 +01:00
Sebastian Dröge
e51423aab9 gst/rtpmanager/gstrtpjitterbuffer.c: Initialize return value to fix compiler warning about uninitialized variable.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_chain_rtcp):
Initialize return value to fix compiler warning about uninitialized
variable.
2009-08-11 02:30:39 +01:00
Wim Taymans
d0ada6127e gst/rtpmanager/gstrtpjitterbuffer.c: Mark signal arg as static scope.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_class_init):
Mark signal arg as static scope.
2009-08-11 02:30:39 +01:00
Wim Taymans
592c3f222f gst/rtpmanager/gstrtpbin.c: Remove internal sync pad, use signals instead to get lip-sync notifications.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c: (gst_rtp_bin_associate),
(gst_rtp_bin_handle_sync), (create_stream), (free_stream),
(new_ssrc_pad_found):
Remove internal sync pad, use signals instead to get lip-sync
notifications.
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_base_init),
(gst_rtp_jitter_buffer_class_init),
(gst_rtp_jitter_buffer_internal_links), (create_rtcp_sink),
(remove_rtcp_sink), (gst_rtp_jitter_buffer_request_new_pad),
(gst_rtp_jitter_buffer_release_pad),
(gst_rtp_jitter_buffer_sink_rtcp_event),
(gst_rtp_jitter_buffer_chain_rtcp),
(gst_rtp_jitter_buffer_get_property):
* gst/rtpmanager/gstrtpjitterbuffer.h:
Make it possible to send SR packets to the jitterbuffer.
Check if the SR timestamps are valid by comparing them to the RTP
timestamps.
Signal the SR packet and the timing information to listeners.
* gst/rtpmanager/gstrtpssrcdemux.c: (create_demux_pad_for_ssrc),
(gst_rtp_ssrc_demux_rtcp_chain), (gst_rtp_ssrc_demux_src_query):
Remove some unused code.
* gst/rtpmanager/rtpjitterbuffer.c: (rtp_jitter_buffer_reset_skew),
(calculate_skew), (rtp_jitter_buffer_get_sync):
* gst/rtpmanager/rtpjitterbuffer.h:
Keep track of the last seen RTP timestamp so that we can filter out
invalid SR packets.
2009-08-11 02:30:38 +01:00
Wim Taymans
5ab3e10594 gst/rtpmanager/gstrtpbin.c: Do not try to keep track of the clock-rate ourselves but simply get the value from the ji...
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c: (gst_rtp_bin_associate),
(gst_rtp_bin_sync_chain), (create_stream), (new_ssrc_pad_found):
Do not try to keep track of the clock-rate ourselves but simply get the
value from the jitterbuffer.
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_jitter_buffer_sink_parse_caps), (gst_rtp_jitter_buffer_chain),
(gst_rtp_jitter_buffer_get_sync):
* gst/rtpmanager/gstrtpjitterbuffer.h:
Add some debug info.
Pass the clock-rate to the jitterbuffer.
Also pass the clock-rate along with the rtp timestamp when getting the
sync parameters.
* gst/rtpmanager/gstrtpptdemux.c: (gst_rtp_pt_demux_chain):
Fix some debug.
* gst/rtpmanager/rtpjitterbuffer.c: (rtp_jitter_buffer_reset_skew),
(calculate_skew), (rtp_jitter_buffer_get_sync):
* gst/rtpmanager/rtpjitterbuffer.h:
Keep track of clock-rate changes and return the clock-rate together with
the rtp timestamps used for sync.
Don't try to construct timestamps when we have no base_time.
* gst/rtpmanager/rtpsource.c: (get_clock_rate):
Request a new clock-rate when the payload type changes.
Reset the jitter calculation when the clock-rate changes.
2009-08-11 02:30:38 +01:00
Wim Taymans
1656fad93e gst/rtpmanager/: Small cleanups and some more debug info.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_jitter_buffer_sink_parse_caps),
(gst_rtp_jitter_buffer_flush_stop), (gst_rtp_jitter_buffer_chain):
* gst/rtpmanager/rtpjitterbuffer.c: (rtp_jitter_buffer_reset_skew),
(calculate_skew):
Small cleanups and some more debug info.
2009-08-11 02:30:38 +01:00
Wim Taymans
6485d60a01 gst/rtpmanager/gstrtpjitterbuffer.c: Also configure the next expected output seqnum when we get a seqnum-base on the ...
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_jitter_buffer_sink_parse_caps), (gst_rtp_jitter_buffer_chain):
Also configure the next expected output seqnum when we get a seqnum-base
on the caps.
2009-08-11 02:30:38 +01:00
Wim Taymans
eaa23fd49a gst/rtpmanager/gstrtpjitterbuffer.c: Fix problem with using the output seqnum counter to check for input seqnum disco...
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_jitter_buffer_sink_parse_caps),
(gst_rtp_jitter_buffer_flush_start),
(gst_rtp_jitter_buffer_flush_stop), (gst_rtp_jitter_buffer_chain),
(gst_rtp_jitter_buffer_loop):
Fix problem with using the output seqnum counter to check for input
seqnum discontinuities.
Improve gap detection and recovery, reset and flush the jitterbuffer on
seqnum restart. Fixes #556520.
* gst/rtpmanager/rtpjitterbuffer.c: (rtp_jitter_buffer_insert):
Fix wrong G_LIKELY.
2009-08-11 02:30:38 +01:00
Wim Taymans
4553863755 gst/rtpmanager/gstrtpjitterbuffer.c: Only update the seqnum-base when it was not already configured for the streams.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_jitter_buffer_sink_parse_caps):
Only update the seqnum-base when it was not already configured for the
streams.
2009-08-11 02:30:37 +01:00
Wim Taymans
85e26f6546 gst/rtpmanager/gstrtpbin.*: Add signal to notify listeners when a sender becomes a receiver.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c: (on_sender_timeout),
(create_session), (gst_rtp_bin_associate),
(gst_rtp_bin_sync_chain), (gst_rtp_bin_class_init),
(gst_rtp_bin_request_new_pad):
* gst/rtpmanager/gstrtpbin.h:
Add signal to notify listeners when a sender becomes a receiver.
Tweak lip-sync code, don't store our own copy of the ts-offset of the
jitterbuffer, don't adjust sync if the change is less than 4msec.
Get the RTP timestamp <-> GStreamer timestamp relation directly from
the jitterbuffer instead of our inaccurate version from the source.
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_chain), (gst_rtp_jitter_buffer_loop),
(gst_rtp_jitter_buffer_get_sync):
* gst/rtpmanager/gstrtpjitterbuffer.h:
Add G_LIKELY macros, use global defines for max packet reorder and
dropouts.
Reset the jitterbuffer clock skew detection when packets seqnums are
changed unexpectedly.
* gst/rtpmanager/gstrtpsession.c: (on_sender_timeout),
(gst_rtp_session_class_init), (gst_rtp_session_init):
* gst/rtpmanager/gstrtpsession.h:
Add sender timeout signal.
* gst/rtpmanager/rtpjitterbuffer.c: (rtp_jitter_buffer_reset_skew),
(calculate_skew), (rtp_jitter_buffer_insert),
(rtp_jitter_buffer_get_sync):
* gst/rtpmanager/rtpjitterbuffer.h:
Add some G_LIKELY macros.
Keep track of the extended RTP timestamp so that we can report the RTP
timestamp <-> GStreamer timestamp relation for lip-sync.
Remove server timestamp gap detection code, the server can sometimes
make a huge gap in timestamps (talk spurts,...) see #549774.
Detect timetamp weirdness instead by observing the sender/receiver
timestamp relation and resync if it changes more than 1 second.
Add method to report about the current rtp <-> gst timestamp relation
which is needed for lip-sync.
* gst/rtpmanager/rtpsession.c: (rtp_session_class_init),
(on_sender_timeout), (check_collision), (rtp_session_process_sr),
(session_cleanup):
* gst/rtpmanager/rtpsession.h:
Add sender timeout signal.
Remove inaccurate rtp <-> gst timestamp relation code, the
jitterbuffer can now do an accurate reporting about this.
* gst/rtpmanager/rtpsource.c: (rtp_source_init),
(rtp_source_update_caps), (calculate_jitter),
(rtp_source_process_rtp):
* gst/rtpmanager/rtpsource.h:
Remove inaccurate rtp <-> gst timestamp relation code.
* gst/rtpmanager/rtpstats.h:
Define global max-reorder and max-dropout constants for use in various
subsystems.
2009-08-11 02:30:37 +01:00
Olivier Crete
d392defbd3 gst/rtpmanager/gstrtpjitterbuffer.c: Make the buffer metadata writable before inserting it in the jitterbuffer becaus...
Original commit message from CVS:
Based on patch by: Olivier Crete <tester at tester dot ca>
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_chain), (gst_rtp_jitter_buffer_loop):
Make the buffer metadata writable before inserting it in the
jitterbuffer because the jitterbuffer will modify the timestamps.
* gst/rtpmanager/rtpjitterbuffer.c:
Update method comment about requiring writable metadata on buffers.
* gst/rtpmanager/rtpsession.c: (rtp_session_process_sr),
(rtp_session_process_rtcp):
Make the RTCP buffer metadata writable because we want to modify the
metadata.
Fixes #546312.
2009-08-11 02:30:37 +01:00
Håvard Graff
1bef5a8ab8 gst/rtpmanager/gstrtpjitterbuffer.c: Fix debug by logging the right seqnum.
Original commit message from CVS:
Patch by: Håvard Graff <havard dot graff at tandberg dot com>
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_chain):
Fix debug by logging the right seqnum.
2009-08-11 02:30:37 +01:00
Peter Kjellerstedt
fd44690d4f gst/rtpmanager/: Corrected a typo (interpollate -> interpolate).
Original commit message from CVS:
* ChangeLog:
* gst/rtpmanager/gstrtpjitterbuffer.c: (gst_rtp_jitter_buffer_loop):
* gst/rtpmanager/rtpsource.c: (rtp_source_get_new_sr):
Corrected a typo (interpollate -> interpolate).
2009-08-11 02:30:36 +01:00
Stefan Kost
a71ffc55d8 Final round of doc updates.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
* gst/speed/gstspeed.c:
* gst/speexresample/gstspeexresample.c:
* gst/videosignal/gstvideoanalyse.c:
* gst/videosignal/gstvideodetect.c:
* gst/videosignal/gstvideomark.c:
* sys/dvb/gstdvbsrc.c:
* sys/oss4/oss4-mixer.c:
* sys/oss4/oss4-sink.c:
* sys/oss4/oss4-source.c:
* sys/wininet/gstwininetsrc.c:
Final round of doc updates.
2009-08-11 02:30:36 +01:00
Stefan Kost
138c2b7cf9 gst/: More doc updates. More xrefs.
Original commit message from CVS:
* gst/deinterlace/gstdeinterlace.c:
* gst/rtpmanager/gstrtpbin.c:
* gst/rtpmanager/gstrtpclient.c:
* gst/rtpmanager/gstrtpjitterbuffer.c:
* gst/rtpmanager/gstrtpptdemux.c:
* gst/rtpmanager/gstrtpsession.c:
* gst/rtpmanager/gstrtpssrcdemux.c:
* gst/sdp/gstsdpdemux.c:
More doc updates. More xrefs.
2009-08-11 02:30:36 +01:00
Stefan Kost
2d1ccbf52e Do not use short_description in section docs for elements. We extract them from element details and there will be war...
Original commit message from CVS:
* ext/dc1394/gstdc1394.c:
* ext/ivorbis/vorbisdec.c:
* ext/jack/gstjackaudiosink.c:
* ext/metadata/gstmetadatademux.c:
* ext/mythtv/gstmythtvsrc.c:
* ext/theora/theoradec.c:
* gst-libs/gst/app/gstappsink.c:
* gst/bayer/gstbayer2rgb.c:
* gst/deinterlace/gstdeinterlace.c:
* gst/rawparse/gstaudioparse.c:
* gst/rawparse/gstvideoparse.c:
* gst/rtpmanager/gstrtpbin.c:
* gst/rtpmanager/gstrtpclient.c:
* gst/rtpmanager/gstrtpjitterbuffer.c:
* gst/rtpmanager/gstrtpptdemux.c:
* gst/rtpmanager/gstrtpsession.c:
* gst/rtpmanager/gstrtpssrcdemux.c:
* gst/selector/gstinputselector.c:
* gst/selector/gstoutputselector.c:
* gst/videosignal/gstvideoanalyse.c:
* gst/videosignal/gstvideodetect.c:
* gst/videosignal/gstvideomark.c:
* sys/oss4/oss4-mixer.c:
* sys/oss4/oss4-sink.c:
* sys/oss4/oss4-source.c:
Do not use short_description in section docs for elements. We extract
them from element details and there will be warnings if they differ.
Also fixing up the ChangeLog order.
2009-08-11 02:30:36 +01:00
Wim Taymans
bd1e0ebfc0 gst/rtpmanager/gstrtpjitterbuffer.c: When checking the seqnum, reset the jitterbuffer if the gap is too big, we need ...
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_chain), (gst_rtp_jitter_buffer_loop):
When checking the seqnum, reset the jitterbuffer if the gap is too big,
we need to do this so that we can better handle a restarted source.
Fix some comments.
* gst/rtpmanager/rtpjitterbuffer.c: (calculate_skew),
(rtp_jitter_buffer_insert):
Tweak the skew resync diff.
Use our working seqnum compare function in -base.
Rework the jitterbuffer insert code to make it clearer and more
performant by only retrieving the seqnum of the input buffer once and by
adding some G_LIKELY compiler hints.
Improve debugging for duplicate packets.
* gst/rtpmanager/rtpsource.c: (rtp_source_process_rtp):
Fix a comment, we don't do skew correction here..
2009-08-11 02:30:36 +01:00
Wim Taymans
2506d13ecc gst/rtpmanager/gstrtpjitterbuffer.c: Simply drop bad RTP packets with a warning instead of just posting an error and ...
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_chain):
Simply drop bad RTP packets with a warning instead of just posting an
error and stopping. This is a perfectly recoverable event and we don't
force people to use an rtpbin to filter out bad packets first.
2009-08-11 02:30:35 +01:00
Wim Taymans
71c2510665 gst/rtpmanager/gstrtpjitterbuffer.c: Avoid waiting for a negative (huge) duration when the last packet has a lower ti...
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_loop):
Avoid waiting for a negative (huge) duration when the last packet has a
lower timestamp than the current packet.
2009-08-11 02:30:35 +01:00