As buffers negotiated with memory:VASurface caps feature can also be
mapped, they can also be configured to use VA derived images, in other
words "direct rendering".
Also, because of the changes in dmabuf allocator as default allocator,
the code for configuring the direct rendering was not clear.
This patch cleans up the code and enables direct rendering when the
environment variable GST_VAAPI_ENABLE_DIRECT_RENDERING is defined,
even then the memory:VASurface cap feature is negotiated.
https://bugzilla.gnome.org/show_bug.cgi?id=786054
Set if source pad can handle dmabuf only if the GstGL context comes
from downstream.
It is possible to know that at two moments:
1\ In the case of GstGLTextureUpload caps feature is negotiated and
downstream pool reports back gst.gl.GstGLContext.
2\ When GstGLContext is found as GstContext from dowstream.
https://bugzilla.gnome.org/show_bug.cgi?id=788503
In function gst_vaapi_find_gl_context() add a direction parameter to
return back the direction where the GstGL context was found.
This is going to be useful when checking if downstream can import
dmabuf-based buffers.
https://bugzilla.gnome.org/show_bug.cgi?id=788503
This patch refactors the code by adding the function
vaapi_plugin_base_set_srcpad_can_dmabuf(), it determines if the passed
GstGLContext can handle dmabuf-based buffers.
The function is exposed publicly since it is intended to be used later
at GstVaapiDisplay instantiation.
https://bugzilla.gnome.org/show_bug.cgi?id=788503
Tis patch, allows some properties that we want to be set on
runtime. (eg. bitrate)
Note that all properties are under control by num_codedbuf_queued.
https://bugzilla.gnome.org/show_bug.cgi?id=786321
VPP support is only needed for advanced deinterlacing, which is not
enabled by default either. Error out if it is selected but VPP is not
supported, and otherwise just work without VPP support.
https://bugzilla.gnome.org/show_bug.cgi?id=788758
When creating the test display for querying capabilites, it try in
certain order: DRM, Wayland and finally X11. GLX nor EGL are tried
since they are either composited with X11 or Wayland.
The reason for this is to reduce the posibility of failure that could
blacklist the plugin.
https://bugzilla.gnome.org/show_bug.cgi?id=782212
We returned FALSE from ::start() if VPP support is not available, but it
is only really needed for complex filters and during transform we check
for that. For simple deinterlacing it is not needed.
Instead of reusing a parameter variable for the return value of
gst_vaapipostproc_transform_caps(), this patch uses the function
scoped pointer. Thus, the code is cleaner.
https://bugzilla.gnome.org/show_bug.cgi?id=785706
Instead of reusing a parameter variable for the return value of
gst_vaapipostproc_fixate_caps(), this patch uses the function scoped
pointer. Thus, the code is cleaner.
https://bugzilla.gnome.org/show_bug.cgi?id=785706
When glimagesink negotiates the caps feature memory:DMABuf the
exported dmabufs buffers with NV12 format are not well rendered, thus
setting only planar.
https://bugzilla.gnome.org/show_bug.cgi?id=788229
Instead of using gst_vaapi_display_set_property() or
gst_vaapi_display_get_property(), this patch set replace it usage
with g_object_set() or g_object_get().
Also the internal helper cb_set_value() is removed since it is not
used anymore.
https://bugzilla.gnome.org/show_bug.cgi?id=788058
Make sure vaapisink create a va surface backed buffer pool and all
required attributes get assigned correctly for drm display type.
This is needed to make the below pipeline working:
gst-launch-1.0 filesrc location= raw_video.mov ! videoparse format=uyvy
width=320 height=240 framerate=30/1 ! vaapisink display=drm
https://bugzilla.gnome.org/show_bug.cgi?id=786954
A new FEI based encoder element for h264 is added: vaapih264feienc
FEI is a an extension to VA-API which is providing low level
advanced control over different stages of encoding.
Extending vaapih264enc with fei support is possible, but it will
make the code too much complicated and will be difficult
to debug. So adding the new encoder element, but keeping
the rank as 0 , vaapih264enc will stay as the primary
encoder for normal use cases.
The vaaih264feienc is mainly useful for customers who want to play
with MotionVectors and Macroblock Predictions. Also user can
do one stage of encoding(eg: only the Motion Vector Calculation)
in software and offload trasformation/entroy-coding etc to
Hardware (which is what PAK module is doing) using FEI element.
vaapih264feienc can work in different modes using fei-mode properoty
eg: gst-launch-1.0 videotestsrc ! vaapih264feienc fei-mode=ENC+PAK ! filesink location=sample.264
Important Note: ENC only mode won't produce any encoded data which is expected.
But ENC alwys requires the output of PAK in order to do the inter-prediction
over reconstructed frames.
Similary PAK mode alway requires MV and MBCode as input, so unless there is an
upstream element providing those buffers, PAK only won't work as expected.
In a nutshell, ENC_PAK and the ENC+PAK modes are the only options we can verify
with vaapih264feienc. But ideally, EN+PAK mode verification is enough to make sure
that ENC and PAK are working as expected since ENC+PAK mode always invoke ENC and PAK
separately in vaapih264feienc.
People contributed:
Wang, Yi <yi.a.wang@intel.com>
Leilei <leilei.shang@intel.com>
Zhong, Xiaoxia <xiaoxia.zhong@intel.com>
xiaominc <xiaomin.chen@intel.com>
Li, Jing B <jing.b.li@intel.com>
https://bugzilla.gnome.org/show_bug.cgi?id=785712https://bugzilla.gnome.org/show_bug.cgi?id=784667
Signed-off-by: Sreerenj Balachandran <sreerenj.balachandran@intel.com>
When vaapih264dec's base-only profile is set to TRUE, fake SVC profile
support in caps.
https://bugzilla.gnome.org/show_bug.cgi?id=732266
Signed-off-by: Sreerenj Balachandran <sreerenj.balachandran@intel.com>
Instead including particular gstgl header files in a header file
that doesn't export a gstgl symbol, the main gstgl header file is
included in gstvaapipluginutil.c where the symbols are used.
https://bugzilla.gnome.org/show_bug.cgi?id=786597
Coverity scan bug:
An unsigned value can never be negative, so this test will always
evaluate the same way.
As len is guint32, there is no need to check it if it is equal or
bigger than zero.
Coverity scan bug:
The variable will contain an arbitrary value left from earlier
computations.
Variable base_only is fetched from base-only property, and it may be
not assigned. It needs to be initialized.
Refactor gst_vaapi_plugin_base_create_gl_context() in order to check
the return value of gst_gl_ensure_element_data(). The result is a code
bit cleaner.
The function g_bit_nth_lsf() may return -1 if the request bit position
is not avaible. Thus, this patch check if the return value is not -1
in order to continue.
Replacing GstVaapiDisplay during rendering might be hiding problems
at some cases, even though it's safe currently since we use cache
of GstVaapidisplay.
Play safe by failing if this happens.
https://bugzilla.gnome.org/show_bug.cgi?id=766704
Through "gst.vaapi.app.Display" context, users can set their own VADisplay
and native display of their backend.
Attributes:
- display : pointer of VADisplay
- x11-display : pointer of X11 display (Display *), if they're using.
This patch creates GstVaapidisplayX11 if information provided through
"gst.vaapi.app.Display"
https://bugzilla.gnome.org/show_bug.cgi?id=766704
So far vaapi encoder does not set profile to src caps. This patch makes it
setting profile to src caps, which is determined by itself.
In addition, if encoder chose different profile, which is not negotiated with
downstream, we should set compatible profile to make negotiation working.
https://bugzilla.gnome.org/show_bug.cgi?id=757941
Check if the requested profile in source caps, is supported by the
VA driver. If it is not, an info log message is send saying that
another (compatible?) profile will be used.
https://bugzilla.gnome.org/show_bug.cgi?id=757941
First check if downstream requests ANY caps. If so, byte-stream is
used and the profile will be choose by the encoder. If dowstream
requests EMPTY caps, the negotiation will fail.
Lately, byte-stream and profile are looked in the allowed caps.
https://bugzilla.gnome.org/show_bug.cgi?id=757941
The check for avc stream format was done in the vaapi encoder's
vmethod get_caps(), but that is wrong since it has to be check
when encoder set_format().
https://bugzilla.gnome.org/show_bug.cgi?id=757941
vaapipostproc didn't negotiate the proper multiview caps losing
downstream information.
This patch enables the playing of MVC encoded stream by setting
the proper multiview mode/flags and views to src caps, according
to sink caps.
https://bugzilla.gnome.org/show_bug.cgi?id=784320
There is another regression with 7a206923 when setting the video
info for the video meta, it should be the one from the image's
allocator rather from the allocation caps.
Test pipeline:
gst-launch-1.0 filesrc location=bug766184.flv ! decodebin \
! tee ! videoconvert ! videoscale \
! video/x-raw, width=1920, height=1080 ! xvimagesink
There is a regression in 7a206923, since the buffer pool ditches all
the buffers generated by them because the pool config size is
different of the buffer's size.
Test pipeline:
gst-launch-1.0 filesrc location=big_buck_bunny_1080p_h264.mov \
! qtdemux ! vaapih264dec ! vaapipostproc ! xvimagesink \
--gst-debug=GST_PERFORMANCE:5
The allocator may update the buffer size according to the VA surface
properties. In order to do this, the video info is modified when the
allocator is created, which reports through the allocation info the
updated size, and set it to the pool config.
Refactor the set_config() virtual method considering a cleaner
approach to allocator instanciation, if it it not set or if it is
not valid for the pool.
https://bugzilla.gnome.org/show_bug.cgi?id=783599
The vaapi video decoders might have different allocation caps from
the negotiation caps, thus the GstVideoMeta shall use the negotiation
caps, not the allocation caps.
This was done before reusing gst_allocator_get_vaapi_video_info(),
storing there the negotiation caps if they differ from the allocation
ones, but this strategy felt short when the allocator had to be reset
in the vaapi buffer pool, since we need both.
This patch adds gst_allocator_set_vaapi_negotiated_video_info() and
gst_allocator_get_vaapi_negotiated_video_info() to store the
negotiated video info in the allocator, and distinguish it from
the allocation video info.
https://bugzilla.gnome.org/show_bug.cgi?id=783599
Renamed local video info structure names in set_config() vitual
method. The purpose of their renaming is to clarify the origin
of those structures, whether come from passed caps parameter
(new_allocation_vinfo) or from the configured allocator
(allocator_vinfo).
https://bugzilla.gnome.org/show_bug.cgi?id=783599
Renamed private GstVideoInfo structure video_info to allocation_vinfo
and alloc_info to negotiated_vinfo.
The purpose of these renaming is to clarify the origin and purpose of
these private variables:
video_info (now allocation_vinfo) comes from the bufferpool
configuration. It describes the physical video resolution to be
allocated by the allocator, which may be different from the
negotiated one.
alloc_info (now vmeta_vinfo) comes from the negotiated caps in
the pipeline. It represents how the frame is going to be mapped
using the video meta.
In Intel's VA-API backend, the allocation_vinfo resolution is
bigger than the negotiated_info.
https://bugzilla.gnome.org/show_bug.cgi?id=783599
When state of vaapisink is changed from PLAYING to NULL, the handle_events
flag is set to FALSE, and never recovered, and then event thread is never
going to run.
So we should allow to set the flag only when users try it.
https://bugzilla.gnome.org/show_bug.cgi?id=782543
Handles new custom event GstVaapiEncoderRegionOfInterest
to enable/disable a ROI region.
Writes a way to use new event to document.
https://bugzilla.gnome.org/show_bug.cgi?id=768248
Signed-off-by: Víctor Manuel Jáquez Leal <vjaquez@igalia.com>
This bin should have similar classification as decodebin which is
"Generic/Bin/Decoder" otherwise it will appear wrongly as video
decoder.
Signed-off-by: Victor Toso <victortoso@redhat.com>
https://bugzilla.gnome.org/show_bug.cgi?id=782063
When downstream negotiates a pixel-aspect-ratio of 0/1, the
calculations for resizing and formatting in vaapipostproc and
vaapisink, respectively, failed, and thus the pipeline.
This patch handles this situation by converting p-a-r of 0/1 to
1/1. This is how other sinks, such as glimagesink, work.
https://bugzilla.gnome.org/show_bug.cgi?id=781759
Since it's created by itself, it should be unref-counted
after gst_buffer_pool_config_set_allocator call. Afterwards,
this allocator will be ref-counted again when assigning to priv->allocator.
https://bugzilla.gnome.org/show_bug.cgi?id=781577
Sometimes a video decoder could set different buffer pool
configurations, because their frame size changes. In this case we
did not reconfigure the allocator.
This patch enables this use case, creating a new allocator inside
the VAAPI buffer pool if the caps changed, if it is not dmabuf-based.
If so, it is just reconfigured, since it doesn't have a surface pool.
https://bugzilla.gnome.org/show_bug.cgi?id=781577
Direct rendering (use vaDeriveImage rather than vaPutImage) has better
performance in some Intel platforms (Haswell, for example) but in others
(Skylake) is the opposite.
In order to have some control, the patch enables the direct rendering
through the environment variable GST_VAAPI_ENABLE_DIRECT_RENDERING.
Also it seems to generating some problems with gallium/radeon backend.
See bug #779642.
https://bugzilla.gnome.org/show_bug.cgi?id=775848
Clear decoders out on a flush but keep the same instance,
rather than completely recreating them. That avoids
unecessarily freeing and recreating surface pools
and contexts, which can be quite expensive
https://bugzilla.gnome.org/show_bug.cgi?id=781142
When these definitions are false, they are undef in the
preprocessor, not a defined value of 0. When they are unset the
compile fails with:
'GST_GL_HAVE_WINDOW_WAYLAND' undeclared (first use in this function)
https://bugzilla.gnome.org/show_bug.cgi?id=780948
This new virtual method, get_profile(), if implemented by specific
encoders, will return the VA profile potentially determined by the
source caps.
Also it is implemented by h264 and h265 encoders, which are the main
users of this vmethod.
https://bugzilla.gnome.org/show_bug.cgi?id=771291
In order to get the supported surface formats within a specific
profile this patch adds the GstVaapiProfile as property to
gst_vaapi_encoder_get_surface_formats().
Currently the extracted formats are only those related with the
default profile of the element's codec.
https://bugzilla.gnome.org/show_bug.cgi?id=771291
As in gstreamer-vaapi a common base class is used, the specific
default category is passed to the base-plugin initializator, thus
the log messages are categorized with the used plugin.
Nonetheless, when the gst-debug is disabled in compilation time,
it is needed to pass NULL to the base-plugin initializator. This
patch does that.
https://bugzilla.gnome.org/show_bug.cgi?id=780302
Particularly in GNOME Wayland, the negotiated or created GL context
defines a GLX environment, but VAAPI fails to create a GLX VA
display because there is no a DRI2 connection.
This patch retries to create the VA display if VA cannot create one
with the GL context parameters. Now using the old list of display
types.
This should also work in the case of systems with two GPU, when the
non-VAAPI has the graphics environment, and the VAAPI-enabled one
shall work headless.
https://bugzilla.gnome.org/show_bug.cgi?id=772838
Removes GstVideoGLTextureUploadMeta caps feature if the driver
doesn't support opengl.
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
https://bugzilla.gnome.org/show_bug.cgi?id=772838
Rename to be consistent with H.264 and also H.265 encoder. The
meson build assumed this was already consistently named, and so
previously was not able to actually build the H.265 decoder.
https://bugzilla.gnome.org/show_bug.cgi?id=778576
When dmabuf is negotiated downstream and decoding and rendering are
not done on the same device, the layout has to be linear in order for
the memory to be shared accross devices, since each device has its
own way to do tiling.
Right now this code is rather just a to-do comment, since we are not
fetching the device ids.
https://bugzilla.gnome.org/show_bug.cgi?id=755072
