Original commit message from CVS:
* gst/filter/gstbpwsinc.c: (bpwsinc_transform):
* gst/filter/gstlpwsinc.c: (lpwsinc_transform):
Sync the GObject properties with the controller even in passthrough
mode to get consistent property values.
Original commit message from CVS:
* gst/mpegtsparse/mpegtspacketizer.c:
* gst/mpegtsparse/mpegtsparse.c:
A sub table is identified by the pair table_id and
sub_table_identifier, not by pid. So hash with that.
* sys/dvb/dvbbasebin.c:
Make sure initial pids are added properly to filter,
Original commit message from CVS:
2007-12-05 Andy Wingo <wingo@pobox.com>
* gst/switch/gstswitch.c (gst_switch_set_property): Don't push
buffers from app thread when unsetting `queue-buffers', it's
dangerous and the chain function will do it for us anyway.
Original commit message from CVS:
* gst/mpegtsparse/Makefile.am:
* gst/mpegtsparse/mpegtspacketizer.c:
* gst/mpegtsparse/mpegtsparse.c:
Remove signals for pat, pmt, nit, eit, sdt. Replace with bus
messages.
* sys/dvb/dvbbasebin.c:
Instead of attaching to signals, use the bus messages.
Also fix up so the dvbsrc starts only outputting the info tables
like PAT, CAT, NIT, SDT, EIT instead of the whole ts.
Original commit message from CVS:
* gst/speexresample/README:
* gst/speexresample/arch.h:
* gst/speexresample/resample.c: (resampler_basic_direct_single),
(resampler_basic_direct_double),
(resampler_basic_interpolate_single),
(resampler_basic_interpolate_double),
(speex_resampler_process_native), (speex_resampler_process_float),
(speex_resampler_process_int),
(speex_resampler_process_interleaved_float),
(speex_resampler_process_interleaved_int),
(speex_resampler_get_input_latency),
(speex_resampler_get_output_latency):
* gst/speexresample/speex_resampler.h:
Update speex resampler to latest SVN. We're now down to only the
changes noted in README again.
* gst/speexresample/speex_resampler_wrapper.h:
* gst/speexresample/gstspeexresample.c:
(gst_speex_resample_push_drain), (gst_speex_resample_query):
Adjust to API changes.
Original commit message from CVS:
* gst/flv/gstflvparse.c: (gst_flv_parse_tag_audio),
(gst_flv_parse_tag_video):
Output segment with proper 'stop' value, makes flvdemux 100% compatible
with gnonlin.
Original commit message from CVS:
patch by: Alessandro Decina
* gst/mpegtsparse/mpegtspacketizer.c:
* gst/mpegtsparse/mpegtspacketizer.h:
* gst/mpegtsparse/mpegtsparse.c:
* gst/mpegtsparse/mpegtsparse.h:
pat-info is now a signal not a GObject property that
gets notified.
pat-info, pmt-info now instead of passing a GObject as
a parameter, pass a GstStructure.
New signals: nit-info, sdt-info, eit-info for DVB SI information
* sys/dvb/camconditionalaccess.c:
* sys/dvb/camconditionalaccess.h:
* sys/dvb/camdevice.c:
* sys/dvb/camdevice.h:
* sys/dvb/camswclient.c:
* sys/dvb/camswclient.h:
* sys/dvb/camutils.c:
* sys/dvb/camutils.h:
Cam code now uses the pmt GstStructure passed from mpegtsparse
signals rather than the GObject.
* sys/dvb/dvbbasebin.c:
Use new signals in mpegtsparse and use GstStructures as per
mpegtsparse's modified API.
Original commit message from CVS:
* gst/speexresample/gstspeexresample.c:
(gst_speex_resample_update_state):
Only post the latency message if we have a resampler state already.
Original commit message from CVS:
* gst/speexresample/gstspeexresample.c:
(gst_speex_resample_update_state):
Also post GST_MESSAGE_LATENCY if the latency changes.
Original commit message from CVS:
* gst/speexresample/resample.c: (speex_resampler_get_latency),
(speex_resampler_drain_float), (speex_resampler_drain_int),
(speex_resampler_drain_interleaved_float),
(speex_resampler_drain_interleaved_int):
* gst/speexresample/speex_resampler.h:
* gst/speexresample/speex_resampler_wrapper.h:
Add functions to push the remaining samples and to get the latency
of the resampler. These will get added to Speex SVN in this or a
slightly changed form at some point too and should get merged then
again.
* gst/speexresample/gstspeexresample.c: (gst_speex_resample_init),
(gst_speex_resample_init_state),
(gst_speex_resample_transform_size),
(gst_speex_resample_push_drain), (gst_speex_resample_event),
(gst_speex_fix_output_buffer), (gst_speex_resample_process),
(gst_speex_resample_query), (gst_speex_resample_query_type):
Drop the prepending zeroes and output the remaining samples on EOS.
Also properly implement the latency query for this. speexresample
should be completely ready for production use now.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_query):
jitterbuffer can buffer an unlimited amount of time and thus has no
max_latency requirements.
Original commit message from CVS:
* gst/speexresample/README:
Add README explaining where the resampling code was taken from
and which changes were done.
* gst/speexresample/resample.c: (speex_alloc), (speex_realloc),
(speex_free):
Use g_malloc() and friends instead of malloc() to achieve higher
portability and define the functions inline.
* gst/speexresample/speex_resampler.h:
Add back some useless preprocessor stuff to keep the diff between
our version and the one from the Speex SVN repository lower.
Original commit message from CVS:
* gst/filter/gstbpwsinc.c: (bpwsinc_set_property):
* gst/filter/gstlpwsinc.c: (lpwsinc_set_property):
Post a GST_MESSAGE_LATENCY if the latency changes.
Original commit message from CVS:
* gst/equalizer/gstiirequalizer10bands.c:
* gst/equalizer/gstiirequalizer3bands.c:
Remove preset iface again. We'll re-add this after its been released
in -good.
Original commit message from CVS:
* gst/speexresample/gstspeexresample.c:
(gst_speex_fix_output_buffer), (gst_speex_resample_transform):
Some small cleanup and addition of a TODO item.
Original commit message from CVS:
* gst/speexresample/gstspeexresample.c:
(gst_speex_fix_output_buffer), (gst_speex_resample_process):
If the resampler gives less output samples than expected
adjust the output buffer and print a warning.
Original commit message from CVS:
* gst/equalizer/gstiirequalizer10bands.c:
* gst/equalizer/gstiirequalizer3bands.c:
Activate preset iface and upload two presets here.
Original commit message from CVS:
Patch by: Wai-Ming Ho <webregbox at yahoo dot co dot uk>
* gst/mpegtsparse/mpegtspacketizer.c: (foreach_stream_clear),
(remove_all), (mpegts_packetizer_clear):
Ensure that the plugin does not crash when the property pat-info is
queried before a PAT is available. It also ensures that the PAT info is
cleared when the changing from PLAYING to READY.
Fixes#487892.
Original commit message from CVS:
* gst/librfb/gstrfbsrc.c:
don't forget to handle the offset's
* gst/librfb/rfbdecoder.c:
* gst/librfb/rfbdecoder.h:
precalculate some many used values
Original commit message from CVS:
patch by: Armando Taffarel Neto <taffarel@solis.coop.br>
* gst/librfb/gstrfbsrc.c:
Set the timestamp for the output buffers
Original commit message from CVS:
Patch by: René Stadler <mail at renestadler dot de>
* gst/replaygain/rganalysis.c: (yule_filter):
Avoid slowdown from denormals when processing near-silence input data.
Spotted by Gabriel Bouvigne. Fixes#494499.
Original commit message from CVS:
* gst/flv/gstflvparse.c:
Add mapping for Nellymoser ASAO audio codec.
(gst_flv_parse_tag_audio), (gst_flv_parse_tag_video): Make sure we
actually have data to read at the end of the tag. This avoids trying
to allocate negative buffers.
Original commit message from CVS:
* gst/equalizer/demo.c: (draw_spectrum):
* gst/spectrum/demo-audiotest.c: (draw_spectrum):
* gst/spectrum/demo-osssrc.c: (draw_spectrum):
* gst/spectrum/gstspectrum.c: (gst_spectrum_class_init):
Change the meaning of the magnitude values given in the
GstMessages by spectrum to decibel instead of
decibel+threshold.
Original commit message from CVS:
* gst/equalizer/gstiirequalizer10bands.c:
* gst/equalizer/gstiirequalizer3bands.c:
* gst/equalizer/gstiirequalizernbands.c:
And continue to update docs. Also include some sample code
for the n-band equalizer in the docs.
Original commit message from CVS:
* gst/equalizer/gstiirequalizer10bands.c:
(gst_iir_equalizer_10bands_class_init):
* gst/equalizer/gstiirequalizer3bands.c:
(gst_iir_equalizer_3bands_class_init):
* gst/equalizer/gstiirequalizernbands.c:
Update docs and property ranges to the real values.
Original commit message from CVS:
* gst/spectrum/gstspectrum.c:
Now do the scaling right for real. Also initialize a previously
uninitialized variable.
Original commit message from CVS:
* gst/equalizer/demo.c:
Make default volume a bit less. Improve layout by giving more space to
the slider with big-numbers and enable fill.
Original commit message from CVS:
* gst/spectrum/demo-audiotest.c: (main):
Use autoaudiosink instead of alsasink and use a sine wave.
* gst/spectrum/gstspectrum.c:
Fix the magnitude calculation.
Original commit message from CVS:
* gst/equalizer/demo.c: (main):
* gst/equalizer/gstiirequalizer.c:
(gst_iir_equalizer_band_class_init), (setup_filter):
Allow setting 0 as bandwidth and handle this correctly.
Also handle a bandwidth of rate/2 properly.
* gst/equalizer/gstiirequalizernbands.c:
(gst_iir_equalizer_nbands_class_init):
Make it possible to generate a N-band equalizer with 1 bands. The
previous limit of 2 was caused by a nowadays replaced calculation
doing a division by zero if number of bands was 1.
Original commit message from CVS:
Patch by: Ole André Vadla Ravnås <ole.andre.ravnas@tandberg.com>
* gst/rtpmanager/gstrtpsession.c:
Fix bad function signatures (#492798).
Original commit message from CVS:
* gst/equalizer/Makefile.am:
* gst/equalizer/demo.c: (on_window_destroy), (on_configure_event),
(on_gain_changed), (on_bandwidth_changed), (on_freq_changed),
(draw_spectrum), (message_handler), (main):
Add small demo application based on the spectrum demo applications
that gets white noise as input, pushes it through an equalizer and
paints the spectrum. For every equalizer band it's possible to set
gain, bandwidth and frequency.
* gst/equalizer/gstiirequalizer.c: (setup_filter):
Add some guarding against too large or too small frequencies and
bandwidths. Also improve debugging a bit.
Original commit message from CVS:
* gst/equalizer/gstiirequalizer.c:
(gst_iir_equalizer_band_set_property),
(gst_iir_equalizer_band_get_property),
(gst_iir_equalizer_band_class_init), (arg_to_scale),
(setup_filter), (gst_iir_equalizer_compute_frequencies):
Replace filters with a bit better filters for which we can actually
find documentation, which don't change anything on zero gain, etc.
Make the frequency property of the bands writable, rename the
band-width property to bandwidth and change the meaning to the
frequency difference between bandedges, change the meaning of the
gain property to dB instead of a weird scale between -1 and 1 that
has no real meaning.
Original commit message from CVS:
* gst/interleave/interleave.c: (gst_interleave_request_new_pad):
Let's not call every request pad we create "sink%d", that'll
create problems if there's to be more than one pad. Fixes#490682.
* tests/check/Makefile.am:
* tests/check/elements/.cvsignore:
* tests/check/elements/interleave.c:
Add unit test for the above.
Original commit message from CVS:
2007-10-27 Julien MOUTTE <julien@moutte.net>
* gst/mpeg4videoparse/mpeg4videoparse.c:
(gst_mpeg4vparse_align),
(gst_mpeg4vparse_drain), (gst_mpeg4vparse_chain),
(gst_mpeg4vparse_sink_setcaps), (gst_mpeg4vparse_sink_event),
(gst_mpeg4vparse_cleanup), (gst_mpeg4vparse_change_state),
(gst_mpeg4vparse_dispose), (gst_mpeg4vparse_base_init),
(gst_mpeg4vparse_class_init), (gst_mpeg4vparse_init),
(plugin_init):
* gst/mpeg4videoparse/mpeg4videoparse.h: Improved version not
damaging headers using a simple state machine.
