If we need to send EOS on a pad that hasn't prerolled, generate
an error on the bus instead, otherwise the app will have no idea.
Fixes the HLS testFragmentNotFound test, which is waiting
for either EOS or an error.
To ensure that pads have caps when they are exposed, do
the exposing when all pending streams have prerolled an
output buffer, and only then EOS and remove any old pads.
Improves the switching sequence by making caps available
as soon as a pad appears.
With fixes from Seungha Yang <sh.yang@lge.com>
https://bugzilla.gnome.org/show_bug.cgi?id=758257
send_event() of parent class (i.e., GstBinClass) iterates srcpads
to send SEEK event. And performing it per srcpad is inefficient.
So, let's drop duplicated SEEK event by checking seqnum
https://bugzilla.gnome.org/show_bug.cgi?id=776612
The reason we previously used queue2 was to calculate the download rate,
but that wasn't entirely correct and we therefore calculate it before
queue2. We therefore now just need a simple queue.
When a MSS server hosts a live stream the fragments listed in the
manifest usually don't have accurate timestamps and duration, except
for the first fragment, which additionally stores timing information
for the few upcoming fragments. In this scenario it is useless to
periodically fetch and update the manifest and the fragments list can
be incrementally built by parsing the first/current fragment.
https://bugzilla.gnome.org/show_bug.cgi?id=755036
This changes the failure case to require a consecutive number of
failures rather than being spread out over the entire stream.
Fixes the case where fetching the manifest was intermittent.
https://bugzilla.gnome.org/show_bug.cgi?id=774177
For formats that need to update the manifest to know about new
fragments as they're being written by the server would never receive an
updated fragment list after a seek event
https://bugzilla.gnome.org/show_bug.cgi?id=774177
With MSVC, this gives the following warning:
warning C4305: 'function': truncation from 'double' to 'gfloat'
Apparently, MSVC does not figure out what type to use for constants
based on the assignment. This warning is very spammy, so let's try to
fix it.
In order to calculate the *actual* bitrate for downloading a fragment
we need to take into account the time since we requested the fragment.
Without this, the bitrate calculations (previously reported by queue2)
would be biased since they wouldn't take into account the request latency
(that is the time between the moment we request a specific URI and the
moment we receive the first byte of that request).
Such examples were it would be biased would be high-bandwith but high-latency
networks. If you download 5MB in 500ms, but it takes 200ms to get the first
byte, queue2 would report 80Mbit/s (5Mb in 500ms) , but taking the request
into account it is only 57Mbit/s (5Mb in 700ms).
While this would not cause too much issues if the above fragment represented
a much longer duration (5s of content), it would cause issues with short
ones (say 1s, or when doing keyframe-only requests which are even shorter)
where the code would expect to be able to download up to 80Mbit/s ... whereas
if we take the request time into account it's much lower (and we would
therefore end up doing late requests).
Also calculate the request latency for debugging purposes and further
usage (it could allow us to figure out the maximum request rate for
example).
https://bugzilla.gnome.org/show_bug.cgi?id=733959https://bugzilla.gnome.org/show_bug.cgi?id=772330
And scale the bitrate with the absolute rate (if it's bigger than 1.0) to get
to the real bitrate due to faster playback.
This allowed in my tests to play a stream with 10x speed without buffering as
the lowest bitrate is chosen, instead of staying/selecting the highest bitrate
and then buffering all the time.
It was previously disabled for not very well specified reasons, which seem to
be not valid anymore nowadays.
Prevent the manifest update loop from looping endlessly
after a seek event, by clearing the variable that tells
the task function not to immediately exit.
The new streams should not be exposed until all streams are done with the
current fragment. The old code is incorrect and actually only checked the
current stream. Fix this by properly checking all streams.
Also, ignore the current stream. The code is only reached when the current
stream finished downloading and since
07f49f15b1 ("adaptivedemux: On EOS, handle it
before waking download loop") download_finished is set after
gst_adaptive_demux_stream_advance_fragment_unlocked() is called.
Without this HLS playback with multiple streams is broken, because the new
streams are never exposed.
https://bugzilla.gnome.org/show_bug.cgi?id=770075
This allows to gradually download part of a fragment when the final size is
not known and only a part of it should be downloaded. For example when only
the moof should be parsed and/or a single keyframe should be downloaded.
https://bugzilla.gnome.org/show_bug.cgi?id=741104
This helps catch those 404 server errors in live streams when
seeking to the very beginning, as the server will handle a
request with some delay, which can cause it to drop the fragment
before sending it.
https://bugzilla.gnome.org/show_bug.cgi?id=753751
To allow adaptivedemux to make retry decisions, it needs to know what
sort of HTTP error has occurred. For example, the retry logic for a
410 error is different from a 504 error.
https://bugzilla.gnome.org/show_bug.cgi?id=753751
Some derived classes (at least dashdemux) expose a seeking range
based on wall clock. This means that a subsequent seek to the start
of this range will be before the allowed range.
To solve this, seeks without the ACCURATE flag are allowed to seek
before the start for live streams, in which case the segment is
shifted to start at the start of the new seek range. If there is
an end position, is is shifted too, to keep the duration constant.
https://bugzilla.gnome.org/show_bug.cgi?id=753751
Make state changes of internal elements more reliable by locking
their state, and ensuring that they aren't blocked pushing data
downstream before trying to set their state.
Add a boolean to avoid starting tasks when the main
thread is busy trying to shut the element down.
Try harder to make switching pads work better by
making sure concurrent downloads are finished before exposing
a new set of pads.
Release the manifest lock when signalling no-more-pads, as
that can call back into adaptivedemux again
If other stream fragments are still downloading but new streams
have been scheduled, don't expose them yet - wait until the last
one finishes. Otherwise, we can cancel a partially downloaded
auxilliary stream and cause a gap.
Drop the manifest lock when performing actions that might
call back into adaptivedemux and trigger deadlocks, such
as adding/removing pads or sending in-band events (EOS).
Unlock the manifest lock when changing the child bin state to
NULL, as it might call back to acquire the manifest lock when
shutting down pads.
Drop the manifest lock while pushing events.
In the case of KEY_UNIT and TRICKMODE_KEY_UNITS seeks, we want to
"snap" to the closest fragment.
Without this, we end up pushing out a segment which does not match
the first fragment timestamp being pushed out, resulting in one or
more buffers being eventually dropped because they are out of segment.
The gst_adaptive_demux_wait_until() function can be woken up either
by its end_time being reached, or from other threads that want to
interrupt the waiting thread.
If the thread is interrupted, it needs to cancel its async clock callback
by unscheduling the clock callback. However, the callback task might already
have been activated, but is waiting for the mutex to become available. In this
case, the call to unschedule does not stop the callback from executing.
The solution to this second issue is to use a reference counted object that
is decremented by both the gst_adaptive_demux_wait_until() function and the
call to gst_clock_id_wait_async (). In this way, the GstAdaptiveDemuxTimer
object is only deleted when both the gst_adaptive_demux_wait_until() function
and the async callback are finished with the object.
https://bugzilla.gnome.org/show_bug.cgi?id=765728
There are several places in adaptivedemux where it waits for
time to pass, for example to wait until it should next download
a fragment. The problem with this approach is that it means that
unit tests are forced to execute in realtime.
This commit replaces the use of g_cond_wait_until() with single
shot GstClockID that signals the condition variable. Under normal
usage, this behaves exactly as before. A unit test can replace the
system clock with a GstTestClock, allowing the test to control the
timing in adaptivedemux.
https://bugzilla.gnome.org/show_bug.cgi?id=762147
A realtime clock is used in many places, such as deciding which
fragment to select at start up and deciding how long to sleep
before a fragment becomes available. For example dashdemux needs
sample the client's estimate of UTC when selecting where to start
in a live DASH stream.
The problem with dashdemux calculating the client's idea of UTC is
that it makes it difficult to create unit tests, because the passage
of time is a factor in the test.
This commit changes dashdemux and adaptivedemux to use the
GstSystemClock, so that a unit test can replace the system clock when
it needs to be able to control the clock.
This commit makes no change to the behaviour under normal usage, as
GstSystemClock is based upon the system time.
https://bugzilla.gnome.org/show_bug.cgi?id=762147
Happens e.g. if a RECONFIGURE event is sent from downstream while we're
switching pads at this very moment. The old pad is gone and the stream has a
new pad.
https://bugzilla.gnome.org/show_bug.cgi?id=764404
When the start_type is GST_SEEK_TYPE_NONE for a forward seek
(or stop_type for a reverse) is not set on a snap seeking operation,
the element should use the current position and then snap as requested.
Also fixes uninitialized variable complaint by clang about
'ts' variable.
