Commit graph

530 commits

Author SHA1 Message Date
Sebastian Dröge
f8eb909d90 qtdemux: In PULL mode, nothing is ever going to send us a SEGMENT event
https://bugzilla.gnome.org/show_bug.cgi?id=767071
2016-06-01 09:32:03 +03:00
Sebastian Dröge
f3e68164e4 qtdemux: Don't override TIME segments from upstream that we just saw
The point of d8fb7a9c96 was to not have any
spurious segments stored for later if we do BYTES->TIME conversion, but
overriding any TIME segments from upstream does not make any sense.

See https://bugzilla.gnome.org/show_bug.cgi?id=763165

https://bugzilla.gnome.org/show_bug.cgi?id=767071
2016-06-01 09:32:03 +03:00
Sebastian Dröge
7cd9d34c80 qtdemux: Set seek event seqnum on all SEGMENT events
Some were forgotten.

See https://bugzilla.gnome.org/show_bug.cgi?id=765935
2016-05-20 11:15:44 +03:00
Seungha Yang
56e273bc21 qtdemux: Parsing elst box based on version
segment_duration and media_time should be parsed based on version
of elst box. Specification defines that an elst box with version 1
has uint64 and int64 values for segment_duration and media_time,
respectively.

https://bugzilla.gnome.org/show_bug.cgi?id=766301
2016-05-15 13:10:03 +03:00
Thiago Santos
00f23053b1 qtdemux: improve edts segment handling after seeks in push mode
Properly handle edts segments for push-based operation seeking.
We only support edts that a single segment that has media at the end,
being preceeded by any number of gap segments.

This also allows the qt segment rate to be respected after seeks

https://bugzilla.gnome.org/show_bug.cgi?id=765669
2016-05-09 11:46:46 -03:00
Thiago Santos
6604614dc5 qtdemux: properly activate segment with rate != 1.0
Also use the qt rate to identify the position within a qt segment
to properly translate playback time to qt media time

https://bugzilla.gnome.org/show_bug.cgi?id=765669
2016-05-09 10:49:53 -03:00
Thiago Santos
c70ed4c914 qtdemux: update segment when new duration is found
Otherwise the old segment will have a shorter stop time and would
cause the stream to end too early.
2016-05-05 09:30:48 -03:00
Thiago Santos
a5e02e948b qtdemux: dismember activate_segment into 2 parts
One that updates and push a new segment, the other will move the
stream to the new segment starting position
2016-05-05 09:30:48 -03:00
Sebastian Dröge
e0b26059ae qtdemux: Store the segment sequence number in the EOS events and SEGMENT_DONE events/message
Also instead of storing it per stream, store it globally in the demuxer. It's
the same for each stream anyway.

https://bugzilla.gnome.org/show_bug.cgi?id=765806
2016-04-29 15:13:34 +03:00
Sebastian Dröge
f8b87c8a05 qtmux: Allow MPEG-1 Layer 1 and 2 in addition to 3 in MP4
Via the MPEG-4 Part 3 spec we can support the other layers too.
Also correct the samples per frame calculation for MP3 if it's MPEG-2 or
MPEG-2.5.

https://bugzilla.gnome.org/show_bug.cgi?id=765725
2016-04-28 16:26:40 +03:00
Seungha Yang
cde45a41a5 qtdemux: Do not use unreliable framerate
timescale/1 is unreliable value for framerate. Due to downstream
element usually use framerate generated by qtdemux, let it be omitted
until the framerate can be reliably calculated.

https://bugzilla.gnome.org/show_bug.cgi?id=764733
2016-04-21 12:53:48 +03:00
Sebastian Dröge
707c69cb72 Revert "qtdemux: expose streams with first moof for fragmented format"
This reverts commit d8bb6687ea.

https://bugzilla.gnome.org/show_bug.cgi?id=764733
2016-04-21 12:53:33 +03:00
Alex Ashley
0c4cc14533 qtdemux: support seeking of CENC encrypted streams
When playing a stream that has been protected by DASH CENC, playback
will fail if a seek is performed. Qtdemux produces the error "stream
is protected using cenc, but no cenc protection system information
has been found" and playback stops.

The problem is that gst_qtdemux_reset() gets called as part of the
FLUSH during a seek. This function frees the protection_system_ids
array. When gst_qtdemux_configure_protected_caps() is called after the
seek has completed, the protection_system_ids array is empty and
qtdemux is unable to create the correct output caps for the protected
stream.

This commit changes it to only free the protection_system_ids on
hard resets.

https://bugzilla.gnome.org/show_bug.cgi?id=761787
2016-04-20 12:19:51 -03:00
Luis de Bethencourt
1bb9d9c682 qtdemux: check stream is available in PIFF parser
qtdemux->streams is an array, it will never evaluate to true when comparing
to NULL. Instead we want to check the number of streams to make sure the
stream is available.

https://bugzilla.gnome.org/show_bug.cgi?id=753614
CID 1358389
2016-04-12 11:39:48 +01:00
Luis de Bethencourt
574bf8e02f Revert "qtdemux: redundant check in PIFF parser"
This reverts commit 41e10524f3.
2016-04-12 11:37:36 +01:00
Luis de Bethencourt
41e10524f3 qtdemux: redundant check in PIFF parser
qtdemux->streams is an array of size GST_QTDEMUX_MAX_STREAMS, it will never
evaluate to true when comparing to NULL.

https://bugzilla.gnome.org/show_bug.cgi?id=753614
CID 1358389
2016-04-12 11:08:37 +01:00
Seungha Yang
faa664b8ea qtdemux: Fix parsing segment duration of empty edit list box
For empty edit list, segment-duration in edit list box should not be
used for segment event.

https://bugzilla.gnome.org/show_bug.cgi?id=764870
2016-04-11 10:28:07 +03:00
Philippe Normand
fd7964e746 qtdemux: PIFF box detection and parsing support
The PIFF data is stored in a custom UUID box which is parsed and the
crypto_info of the element is updated accordingly. This allows
downstream decryptors to process and decrypt the protected content.

https://bugzilla.gnome.org/show_bug.cgi?id=753614
2016-04-02 18:01:10 +01:00
Jimmy Ohn
206e24855a qtdemux: Fix qtdemux memory leak in src_convert function
If we don't find the index of the sample correctly in src_convert function,
we have to unref about the qtdemux before returning value.
So, I have modify it about instead pass qtdemux as a parameter into
src_convert function.

https://bugzilla.gnome.org/show_bug.cgi?id=763973
2016-03-24 14:36:26 +02:00
Jimmy Ohn
c633f2aab7 qtdemux: Add check condition for fail case in get_duration function
Currently, get_duration function always return the TRUE even though
it can't be set duration correctly. So, we need to add the else condition
about the fail case. Also, we already set the GST_CLOCK_TIME_NONE
in this function. So I have modify it which is related code in some
function.

https://bugzilla.gnome.org/show_bug.cgi?id=763968
2016-03-24 14:35:47 +02:00
Jimmy Ohn
0ef9e6d139 qtdemux: Modify data type of duration in handle_src_query function
Data type of duration need to modify from guint64 to GstClockTime
for consistency in handle_src_query function.

https://bugzilla.gnome.org/show_bug.cgi?id=763965
2016-03-24 14:34:55 +02:00
Vineeth TM
1071309870 good: use new gst_element_class_add_static_pad_template()
https://bugzilla.gnome.org/show_bug.cgi?id=763076
2016-03-24 14:32:20 +02:00
Jimmy Ohn
84f436f122 qtdemux: Add the function to get channels and sample rate for AAC
Add aac_get_channels and sample_rate function to get these value for
AAC.

https://bugzilla.gnome.org/show_bug.cgi?id=749110
2016-03-24 14:28:09 +02:00
Thiago Santos
d8fb7a9c96 qtdemux: reset pending segment if we are already pushing one
When upstream is running in bytes in push-mode, qtdemux will
convert seeks from time to bytes and send it upstream. Upstream
element will perform a byte seek and send a byte segment to qtdemux
that will convert it to time and push it downstream.

There is, however, the pending_segment variable that stores a new
segment event to be pushed before the next data. When handling seeks
as mentioned above this variable was being ignored and, if it contained
some segment event, it would override the one resulting from the seek.
This would restore a previous segment and would cause the seek segment
to be discarded downstream.

This patch fixes this issue by unrefing any pending segment as the
seek from upstream should contain the latest one that should be
used, as requested by the application.

https://bugzilla.gnome.org/show_bug.cgi?id=763165
2016-03-07 15:26:13 -03:00
Thiago Santos
b46af7fda7 qtdemux: run gst-indent
Otherwise commits will fail with our indent check hook
2016-03-07 15:26:13 -03:00
Philippe Normand
9c47c0da59 qtdemux: cenc aux info parsing from mdat support in PULL mode
This is already supported for PUSH mode but was failing in PULL mode.
The aux info is sometimes stored in the mdat before the first sample,
so the loop task needs to pull data stored at that location and
perform the aux info cenc parsing.

https://bugzilla.gnome.org/show_bug.cgi?id=761700

https://bugzilla.gnome.org/show_bug.cgi?id=762516
2016-02-25 12:46:27 +02:00
Philippe Normand
67f3fc1748 qtdemux: prevent buffer flow if any stream failed to be exposed
In some cases the stream configuration can fail, for instance if the
stream is protected and no decryptor was found. For those situations
the demuxer shouldn't emit any data on the corresponding source pad of
the stream and bail out.

https://bugzilla.gnome.org/show_bug.cgi?id=762516
2016-02-25 12:46:27 +02:00
Philippe Normand
fb5d50cd07 qtdemux: don't push encrypted buffer without cenc metadata
When the cenc metadata is stored outside of the moof box and the
stream is exposed it is possible that the cenc metadata hasn't been
processed yet while the first buffer is being pushed. When this
happens the buffer can't possibly be decrypted downstream so don't
push it.

https://bugzilla.gnome.org/show_bug.cgi?id=762516
2016-02-25 12:46:27 +02:00
Philippe Normand
459ef195bb qtdemux: read saio aux_info_type as a FOURCC
https://bugzilla.gnome.org/show_bug.cgi?id=756897
2016-02-24 10:54:23 +02:00
Tim-Philipp Müller
13a9a7543d win32: remove outdated build cruft
This hasn't been touched for generations, doesn't work,
and is just causing confusion. We also don't want to
maintain these files manually.
2016-02-21 09:47:43 +00:00
Matej Knopp
f96c9eb6bc qtdemux: workaround for files with wrong color_table_id value
Instead of erroring out, just use the default color table.

https://bugzilla.gnome.org/show_bug.cgi?id=761637
2016-02-19 16:00:59 +00:00
Philippe Normand
52b16768a2 qtdemux: plug leaks in cenc aux info parsing 2016-02-19 10:30:46 +02:00
Alex Ashley
97f6f7c713 qtdemux: only transform protected caps once
Commit 7873bede31
(https://bugzilla.gnome.org/show_bug.cgi?id=760774) changed the
behaviour of qtdemux to call gst_qtdemux_configure_stream() for
every new moof.

When playing a protected stream, gst_qtdemux_configure_stream()
calls gst_qtdemux_configure_protected_caps(). The
gst_qtdemux_configure_protected_caps() function takes the original
media format, puts this in a field called "original-media-type"
and then changes the caps to "application/x-cenc".

The gst_qtdemux_configure_protected_caps() did not handle the case
of being called multiple times, causing it to incorrectly set the
caps. The second call was causing the caps to be set to:

    application/x-cenc, original-media-type"application/x-cenc"

This commit makes gst_qtdemux_configure_protected_caps() check that
the caps have already been transformed, so that it only gets
changed once.

    https://bugzilla.gnome.org/show_bug.cgi?id=761769
2016-02-17 17:04:25 +02:00
Seungha Yang
7873bede31 qtdemux: fix framerate calculation for fragmented format
qtdemux calculates framerate using duration and the number of sample.
In case of fragmented mp4 format, however, the number of sample can
be figure out after parsing every moof box. Because qtdemux does not
parse every moof in QTDEMUX_STATE_HEADER state, it will cause incorrect
framerate calculation.

This patch will triger gst_qtdemux_configure_stream() for every new moof.
Then, framerate will be calculated by using duration and n_samples of the moof.

https://bugzilla.gnome.org/show_bug.cgi?id=760774
2016-01-29 11:01:44 +01:00
Seungha Yang
0391a93a35 qtdemux: handling zero segment-duration edit list
Based on document ISO_IEC_14496-12, edit list box can have
segment duration as zero. It does not imply that media_start equals to
media_stop. But, it just indicates a sample which should be presented
at the first. This patch derives segment duration using media_time
and duration of file. And set derived duration to segment-duration.

https://bugzilla.gnome.org/show_bug.cgi?id=760781
2016-01-29 10:57:05 +01:00
Seungha Yang
d8bb6687ea qtdemux: expose streams with first moof for fragmented format
In case of push mode, qtdemux expose streams after got moov box.
We can not guarantee that a moov box has sample data such as sample duration
and the number of sample in stbl box for fragmented format case.
So, if a moov has no sample data, streams will not be exposed until get the first moof.

https://bugzilla.gnome.org/show_bug.cgi?id=760779
2016-01-29 10:53:39 +01:00
Víctor Manuel Jáquez Leal
e1834d1512 gst: Fix unintialized variable warnings
While cross-compiling with Linaro GCC 5.1-2015.08, it complained
about a couple unitialized variables.

This patch initializes them to zero.

https://bugzilla.gnome.org/show_bug.cgi?id=761094
2016-01-27 13:46:07 +01:00
Thiago Santos
0906d822ad qtdemux: drop flushes from our own offset seek
Prevents downstream from receiving flushes for a seek only in
upstream. Those seeks are only to start reading from the right
offset when skipping or returning to qt atoms.

https://bugzilla.gnome.org/show_bug.cgi?id=758928
2015-12-22 12:33:39 -03:00
Jan Schmidt
774a32ff89 qtmux: Don't write invalid edit list start time.
Avoid writing a negative number as a large positive
integer in an edit list when the first_ts is smaller
than the first_dts - which can happen when the first
packet received has a PTS but no DTS.

https://bugzilla.gnome.org/show_bug.cgi?id=759615
2015-12-19 03:49:28 +11:00
Luis de Bethencourt
e731fe4af5 isomp4: remove unused parameters in build_*_extension
AtomTRAK parameter is not used by build_mov_alac_extension(),
build_jp2h_extension(), or build_mov_alac_extension()  and can be
removed.
2015-12-10 18:39:04 +00:00
Luis de Bethencourt
3a38682cf0 isomp4: replace variable only used once
Replace has_shift variable with value since it is only use once.
2015-12-10 18:38:55 +00:00
Edward Hervey
d78d589627 qtdemux: Stop pushing data as soon as possible in push-mode
When working in push-mode, we attempt to push out everything currently
buffered in the adapter.

This has two pitfalls:
* We could stop earlier (the moment we get a non-ok or non-not-linked)
* We return the last combined flow return, which might be completely
  different from the previous combined flow return
2015-12-07 16:36:15 +01:00
Luis de Bethencourt
a400d504ca qtdemux: add support for Opus
Add support for demuxing Opus encapsulated in MP4 files, based on the
following spec: https://www.opus-codec.org/docs/opus_in_isobmff.html

https://bugzilla.gnome.org/show_bug.cgi?id=742643
2015-11-26 21:46:14 +00:00
Luis de Bethencourt
9d70682e73 qtdemux: use macro for codec_name
Use _codec() macro instead of duplicating code.
2015-11-25 22:48:36 +00:00
Thiago Santos
2dbc9f86fc qtdemux: restore the segment on case of soft reset
When seeking back to restore the mdat position a flush is pushed
through and it resets downstream segment information. Make sure
that after the flush (that does a soft reset) a segment will
be pushed again

Fixes regressions spotted at
https://ci.gstreamer.net/job/GStreamer-master-validate/2100/
2015-11-24 10:57:28 -03:00
Luis de Bethencourt
53f8f1abae qtdemux: unite duplicate FourCC
Unite in fourcc.h the FourCCs that are used twice or more in qtdemux
2015-11-20 11:05:51 +00:00
Luis de Bethencourt
0fffb8f2e2 atoms: remove unused argument of build_mov_wave_extension()
AtomTrak * trak argument of build_move_wave_extension() isn't used.
Removing it.
2015-11-19 19:48:09 +00:00
Luis de Bethencourt
ca6d71ef2a qtdemux: remove duplicate FourCC
Use the available FourCCs in fourcc.h instead of duplicating them.
2015-11-19 19:28:25 +00:00
Luis de Bethencourt
ca46897bf7 isomp4: centralize all FourCC
10 FourCCs generated with GST_MAKE_FOURCC() in gstqtmux.c and atoms.c
already exist in fourcc.h. Don't duplicate these and use them directly.
Plus moving 6 to fourcc.h, to centralize them all.
2015-11-19 18:41:39 +00:00
Luis de Bethencourt
5ed8cba024 isomp4: add support for Opus in mp4mpux
Add support for muxing MP4 files containing Opus. Based on the spec
detailed here:
https://www.opus-codec.org/docs/opus_in_isobmff.html

https://bugzilla.gnome.org/show_bug.cgi?id=742643
2015-11-19 17:08:25 +00:00