Mark Nauwelaerts
f5bbc56745
rtpamr(de)pay: support AMR-WB SID frame
2010-09-06 14:46:59 +02:00
Mark Nauwelaerts
d1974e386a
rtpg729pay: properly support perfect-rtptime
2010-09-06 14:46:56 +02:00
Mark Nauwelaerts
713719f705
qtdemux: improve framerate determining
...
Collect a limited number of starting sample durations and use the median of
those to determine caps framerate.
2010-09-06 14:45:43 +02:00
Mark Nauwelaerts
13b553bce7
matroskademux: attempt more resync upon (cluster) parse error
...
That is, if parse error occurs in state requiring to move to next cluster,
and doing so to the expected next position of cluster fails, then scan for a
next cluster from present position and resume from there.
Fixes #620790 .
2010-09-06 14:45:40 +02:00
Mark Nauwelaerts
4d9c1e99f2
matroskademux: not so fatal error handling
...
If some bits out of place in block(group) parsing, forego and move to next.
Also skip large blocks in pull mode, but need to give up in push mode.
Fixes #626463 .
Improves #620790 .
2010-09-06 14:45:37 +02:00
Mark Nauwelaerts
680eb51b68
matroskademux: additional parse recovery
...
In particular, upon parse failure in one cluster, we may forego remaining
content and try resuming from next cluster onwards.
Fixes #620790 .
2010-09-06 14:45:30 +02:00
American Dynamics
5999e8e716
rtspsrc: Add property to configure udpsrc buffer size
...
Add a new udp-buffer-size property to configure the buffer-size on the udpsrc
elements.
Fixes #628058
2010-09-06 12:22:11 +02:00
Wim Taymans
93228ccd52
rtpbin: add ntp-sync property
...
Add an ntp-sync property that will sync the received streams to the server
NTP time. This requires synchronized NTP times between the sender and receivers,
like with ntpd.
Based on patch from Thijs Vermeir.
Fixes #627796
2010-09-06 11:01:57 +02:00
Wim Taymans
f03fd91400
jitterbuffer: rename a variable to avoid confusion
2010-09-06 11:01:57 +02:00
Wim Taymans
e3479630ae
rtpbin: rename some variables for less confusion
2010-09-06 11:01:57 +02:00
Wim Taymans
0f59664c6a
rtpjitterbuffer: move comment where it belongs
2010-09-06 11:01:57 +02:00
Wim Taymans
4fd81747f3
session: minor cleanups
...
Make clock snapshots more accurate by only sampling the same clock once.
2010-09-06 11:01:57 +02:00
Thijs Vermeir
51020549f0
rtpbin: add use-pipeline-clock property
...
With this property RTCP SR NTP times can be based
on the system clock (maybe synced with ntpd) or the
current pipeline clock.
https://bugzilla.gnome.org/show_bug.cgi?id=627796
2010-09-06 11:01:57 +02:00
Wim Taymans
3bae70ceea
rtspext: stop configuration on first failure
...
Stop the configuration of a stream as soon as some of the extensions return
FALSE.
Fixes #581294
2010-09-06 11:01:57 +02:00
Wim Taymans
6660817af1
multifdsink: use refcount to count host/port duplicates
...
Instead of adding multiple client structures for the same host/port pair, use a
refcount.
Add a send-duplicates feature that allows you to disable sending multiple copies
of the same packet to the same host when it was added multiple times. The
send-duplicates property is by default set to TRUE for backwards compatibility
although it is very likely that this is not desired behaviour.
2010-09-06 10:45:28 +02:00
Wim Taymans
e4f8144bbf
rtspsrc: implement custom event handler
...
Extend the _push_event() function so that it can also send events to the udp
sources when asked.
Implement a custum send_event function that correctly dispatches the downstream
events in TCP mode. This fixes sending EOS to rtspsrc and have it push the EOS
downstream.
2010-09-06 10:45:23 +02:00
Wim Taymans
fadade4d4a
jpegdepay: handle DISCONT and reset state
...
Put a DISCONT event on the next output buffer when the input buffer had a
DISCONT.
Make sure we clear our adapter and reset our state before going to PAUSED.
Free the qtables.
Fixes #626869
2010-09-06 10:23:07 +02:00
Wim Taymans
3ec0d6b245
g729pay: extend from right parent
2010-09-06 10:23:07 +02:00
Stefan Kost
3b91ea7c81
qtdemux: use GST_BOILERPLATE macro
2010-09-06 09:57:58 +03:00
Stefan Kost
1c47115b8e
videmixer: add a example showing how to use the child properties
...
Show how to position and set the alpho of the videos on gst-launch.
2010-09-06 09:57:57 +03:00
Stefan Kost
77fe8c151a
spectrum only aggregate magnitude/phase if user asks for it
2010-09-06 09:53:00 +03:00
Stefan Kost
0dca0becb2
spectrum: improve performance with local vars
...
Use 'input' instead of 'spectrum->input' which was intende already (variable
exists, but not used everywhere). Also use a local version of
'spectrum->input_pos'.
2010-09-06 09:53:00 +03:00
Stefan Kost
8beead14d0
spectrum: code cleanup
...
More comments and logging. Extract one complex condition to a variable. Reorder
some code for readability.
2010-09-06 09:53:00 +03:00
Stefan Kost
50a139de85
spectrum: improve property setter
...
consistently only update if the property actualy changed the value. Do it
without reading the gvalue twice. No need to reset the spectrum analyzer for
threshold changes.
2010-09-06 09:53:00 +03:00
Stefan Kost
61f22f4379
spectrum: add helper to only flush ringbuffer data without resetting the fft
...
Reduces some duplicated code as well.
2010-09-06 09:53:00 +03:00
Stefan Kost
34bdec3d58
spectrum: more comments
2010-09-06 09:53:00 +03:00
David Schleef
738e092d4e
deinterlace: Document methods with bad quality
2010-09-05 22:23:58 -07:00
David Schleef
9071cc8748
deinterlace: initialize all deinterlace class members
...
This fixes UYVY deinterlacing.
2010-09-05 22:23:58 -07:00
David Schleef
85aed94676
videomixer: orc_init() doesn't need to be called
...
There's no need to call orc_init() unless you're using the Orc
API directly. All code created by orcc is guaranteed to work
without calling orc_init().
2010-09-05 18:45:21 -07:00
David Schleef
6143a60bdb
deinterlace: Fix greedyl Orc implementation
...
To agree with the previous C/asm code.
2010-09-05 18:42:59 -07:00
Thiago Santos
de8fda9cc2
videomixer2: Fail when caps are incompatible
...
Do not forget to return false when caps are incompatible.
2010-09-05 22:34:36 -03:00
Thiago Santos
8435529073
videomixer: Only init orc if it is available
...
Put some ifdef around orc_init to prevent build errors
2010-09-05 20:56:52 -03:00
David Schleef
6584c75afe
deinterlace: Update disted Orc files
2010-09-04 12:46:31 -07:00
David Schleef
f35d546c71
deinterlace: remove assembly code in favor of orc
2010-09-04 12:39:11 -07:00
David Schleef
02196850dd
deinterlace: implement greedy in Orc
2010-09-04 12:39:11 -07:00
David Schleef
294d5c48da
update disted Orc files
2010-09-04 11:43:21 -07:00
Thibault Saunier
08fd719898
alphacolor: Fix classification
...
This is no effect but a converter. Fixes bug #628608 .
2010-09-04 14:55:43 +02:00
Sebastian Dröge
e79742205c
videomixer2: Add documentation and add to the docs
2010-09-04 14:55:43 +02:00
Sebastian Dröge
bcfd60a8d2
videomixer2: Add videomixer2 element
...
This is based on collectpads2 and is synchronizing
all streams based on the running time.
New features compared to old videomixer:
* Synchronizing frames on the running time
* Improved and simplified negotiation
* Full QoS support
* Variable framerate support
Fixes bug #626048 , #624905 .
2010-09-04 14:52:11 +02:00
Pavel Kostyuchenko
6940559c46
matroskademux: Relax parsing of date tags
...
Before we required a complete date in matroskademux but in
id3demux for example only the year or year and month was possible too.
Fixes bug #628454 .
2010-09-04 14:52:11 +02:00
Sebastian Dröge
55a52262d3
wavparse: Don't use GST_FLOW_IS_FATAL()
2010-09-04 14:52:10 +02:00
Sebastian Dröge
d224251df4
rtspsrc: Don't use GST_FLOW_IS_FATAL() and GST_FLOW_IS_SUCCESS()
2010-09-04 14:52:10 +02:00
Sebastian Dröge
7fe34f3889
qtdemux: Don't use GST_FLOW_IS_FATAL()
2010-09-04 14:52:10 +02:00
Sebastian Dröge
e8743b3789
matroskademux: Don't use GST_FLOW_IS_FATAL()
2010-09-04 14:52:09 +02:00
Sebastian Dröge
1243b76df7
rndbuffersize: Don't use GST_FLOW_IS_FATAL()
2010-09-04 14:52:09 +02:00
Sebastian Dröge
78eca34a6d
flvdemux: Don't use GST_FLOW_IS_FATAL()
2010-09-04 14:52:09 +02:00
Sebastian Dröge
1ce0b2dfc7
avidemux: Don't use GST_FLOW_IS_FATAL()
...
And document why wrong-state doesn't need an error message.
2010-09-04 14:52:09 +02:00
Sebastian Dröge
77c7f5fdcd
videomixer: Update disted ORC files
2010-09-04 14:52:09 +02:00
Sebastian Dröge
6da14d0c41
videomixer: Optimize ARGB blending and implement BGRA blending with orc
...
This now means, that we have absolutely no handwritten assembly anymore
in videomixer and it's also faster now when using SSE.
2010-09-04 14:52:09 +02:00
David Schleef
7cfa519547
videomixer: Add orc implementation for blending
...
videomixer: Add orc implementation for blending
2010-09-04 14:52:08 +02:00
David Schleef
1ace738c3a
videomixer: Fix example pipelines
...
videomixer: Fix example pipelines
2010-09-04 14:52:08 +02:00
Sebastian Dröge
86403e85c5
imagefreeze: Fix another subtle race condition related to starting the srcpad task
...
Due to a seek the srcpad task could be started in rare circumstances although
it shouldn't be started anymore because no upstream buffer is available.
2010-09-04 14:52:08 +02:00
Sebastian Dröge
e51fe6c181
imagefreeze: Protect the flushing-seek variable by the srcpad's stream lock
...
This fixes a subtle race condition, that caused bufferalloc to fail
with wrong-state due to a seek but caused it to be not retried as
it should.
2010-09-04 14:52:08 +02:00
Sebastian Dröge
d8ef9bb691
imagefreeze: Always generate a perfectly timestamped stream
...
Before there could be rounding errors when calculating the duration,
resulting in timestamp + duration being smaller than the next buffer's
timestamp.
2010-09-04 14:52:07 +02:00
Sebastian Dröge
95f5b494fa
wavparse: Post an error message if EOS happens before valid input is found
...
Fixes bug #627341 .
2010-09-04 14:52:06 +02:00
Sebastian Dröge
44a5cb4313
avidemux: Send close newsegment event from the streaming thread
2010-09-04 14:52:06 +02:00
Sebastian Dröge
62dd7c4efd
imagefreeze: Retry bufferalloc if it was aborted with WRONG_STATE because of a flushing seek
2010-09-04 14:52:05 +02:00
Sebastian Dröge
dffab828c6
imagefreeze: Return GST_FLOW_UNEXPECTED when getting a second buffer
...
This prevents upstream from pushing many useless buffers and makes
it go into EOS state.
2010-09-04 14:52:05 +02:00
Sebastian Dröge
134b1f0eee
imagefreeze: Passthrough buffer allocations
2010-09-04 14:52:05 +02:00
Tim-Philipp Müller
b26897dd84
Release 0.10.25
2010-09-02 23:44:19 +01:00
David Schleef
4eee45debb
deinterlace: use separate buffer metadata for fields
...
Call gst_buffer_make_metadata_writable() on buffers that are
duplicated into fields. Fixes #627689 .
2010-08-23 02:51:24 -07:00
Sebastian Dröge
9e981f6c2d
0.10.24.4 pre-release
2010-08-21 21:41:36 +02:00
Sebastian Dröge
90f273b165
imagefreeze: Send close segments when seeking only for non-flushing seeks and if we already sent a newsegment event
...
Fixes bug #626619 .
2010-08-12 11:29:53 +02:00
Mark Nauwelaerts
8ea04c66b8
qtdemux: prevent reading past avc1 atom when parsing
...
... when one of the subatoms has a large/invalid size.
Fixes #626609 .
2010-08-11 12:58:17 +02:00
Sebastian Dröge
19c8226c6d
videomixer: Fix pipeline in the documentation
...
Make sure that we have the same color format on all streams, i.e. AYUV
Fixes bug #625452 .
2010-08-06 19:24:56 +02:00
Sebastian Dröge
fc00857c82
videomixer: Move debug categories into the source files and add debug category for the blend functions
2010-08-04 19:43:08 +02:00
Wim Taymans
af70b300cc
rtpmp4gpay: implement perfect timestamps
...
Use bitreader for parsing the config string
Reset state variables when going to READY
Parse frame length and use it to keep track of the rtptimestamps
2010-08-04 10:40:24 +02:00
Wim Taymans
29b32853d5
rtph263pdepay: allow more clock-rates as input
...
Although the spec says that the clock-rate should always be 90000, some rtsp
servers send different clock-rates so we must accept then in order to handle
those streams too.
2010-08-04 10:40:24 +02:00
Wim Taymans
d37c5e9021
L16depay: default to 1 channel
...
When we can't find any channel or encoding-params on the caps for dynamic
payload types, set the default number of channels to 1, as the spec says we
should.
See #623209
2010-08-04 10:40:24 +02:00
Wim Taymans
9dcfed0a5b
rtspsrc: don't reuse udp sockets
...
Don't reuse sockets but make the udpsrc element fail the state change when the
socket is already in use. If we don't prevent reuse, we might end up using the same
port for different streams in some cases.
Fixes #622017
2010-08-04 10:40:23 +02:00
Wim Taymans
e739998adf
udpsrc: add property to enable port reuse
2010-08-04 10:39:45 +02:00
Wim Taymans
ed80c1834c
L16depay: use encoding-params for the channels
...
When parsing the number of channels, use the encoding-params property from the
RTP caps because that is where we can find the channels according to the spec.
Fall back to the channels property in the caps when needed.
Fixes #623209
2010-08-04 10:39:44 +02:00
Wim Taymans
e39d7f7359
rtspsrc: improve error and warning message
...
Improve error and warning message.
Fixes #622577
2010-08-04 10:39:44 +02:00
Mark Nauwelaerts
f1fe0e7157
rtpg729pay: avoid basertppayload perfect-rtptime mode
...
G729 packets may only occur intermittently (e.g. cn packets), and as such
do not allow for perfect-rtptime calculating rtp times based on frame or byte
count. In particular, do not use rtp audio base payloader as base class, but
rather base payloader directly.
2010-08-02 13:05:05 +02:00
Mark Nauwelaerts
6405df0c50
rtph264pay: fix element leak
2010-08-02 13:04:41 +02:00
Mark Nauwelaerts
fadff26eec
rtpmp4vdepay: fix buffer leak
2010-08-02 13:04:39 +02:00
Mark Nauwelaerts
99dd8fb921
avidemux: push mode; use proper movi offset for movi based index
...
Fixes #623357 .
2010-07-29 17:19:22 +02:00
Thiago Santos
bef350bf34
qtdemux: Correctly parse mvhd atoms
...
Parse mvhd data according to its version to avoid failing
on valid files.
2010-07-29 10:00:15 -03:00
Thiago Santos
a15430a862
qtdemux: Fix the max/avg in btrt atom reading
...
According to ISO media base format, the max bitrate is the
first one, and the avg comes next.
2010-07-28 12:22:23 -03:00
Mark Nauwelaerts
8419df627b
matroskademux: proper handling of streaming upstream without duration
...
Fixes #625371 .
2010-07-28 14:45:25 +02:00
Tim-Philipp Müller
a0de5e8a4f
matroskademux: initialize some variables to fix compiler warnings on OSX build bot
2010-07-26 18:33:09 +02:00
Arnaud Vrac
c6f47c34fb
rtspsrc: add port-range property to rtspsrc
...
To support setups with firewall/ipsec, it is useful for an rtsp client to be
able to set the range of ports that can be used for rtp/rtcp reception.
Allows this by adding a "port-range" property to the rtspsrc element.
Fixes #625153
2010-07-26 17:47:35 +02:00
Andoni Morales Alastruey
e6d7e69844
qtdemux: set the pixel-aspect-ratio field also for par=1/1
...
https://bugzilla.gnome.org/show_bug.cgi?id=625302
2010-07-26 16:08:37 +02:00
Wim Taymans
8696d10a5b
rtspsrc: fix memory leak in server request reply
...
The RTSP server rtspsrc is communicating with, sends a GET_PARAMETER request
periodically as a ping. The code in gst_rtspsrc_handle_request forms an OK
response and sends, but doesn't call gst_rtsp_message_unset to free the memory
after sending the response. This results in a constant slow memory leak.
Fixes #624770
2010-07-26 15:33:44 +02:00
Zaheer Abbas Merali
c00cd43e8b
cpureport: remove bogus docs
2010-07-24 22:39:54 +01:00
Zaheer Abbas Merali
961ab6d4b2
debugutils: new element cpureport
...
cpureport posts bus messages after every buffer received of cpu used, system
clock time, buffer time
2010-07-24 22:37:11 +01:00
Mark Nauwelaerts
c626e90fda
matroskademux: pull mode non-cue seeking
...
That is, in files that have no index (Cue), perform seek by scanning for
nearest cluster with timecode before requested position. Scanning is done
as a combination of interpolation and sequential scan.
Fixes #617368 .
2010-07-22 12:18:14 +02:00
Mark Nauwelaerts
4b76e95abe
matroskamux: streamable files need no _finish
...
Fixes #624455 .
2010-07-22 12:18:11 +02:00
Mark Nauwelaerts
f62c6ce5c8
avidemux: push mode; handle 0-size data chunks
...
Fixes #618535 .
2010-07-22 11:46:51 +02:00
Sebastian Dröge
38124ef5e5
videomixer: Only reset QoS information and send a NEWSEGMENT event downstream for NEWSEGMENT events on the master pad
2010-07-21 10:23:30 +02:00
David Schleef
eb81574469
capsdebug: Add new element
2010-07-20 14:02:52 -07:00
Tim-Philipp Müller
819fb47b78
matroskamux: demote WARNING message to LOG level
...
It's not a warning.
2010-07-20 16:12:21 +01:00
Mark Nauwelaerts
fd959ca77f
matroskademux: add missing argument in debug message
2010-07-16 18:05:21 +02:00
Mark Nauwelaerts
39268f10d3
matroskademux: remove bogus UNLOCK
2010-07-16 14:00:40 +02:00
Mark Nauwelaerts
65fdbe68ec
qtdemux: also calculate PAR using track width and height for QT files
...
(... as opposed to only for ISO style files).
Fixes #624173 .
2010-07-16 14:00:18 +02:00
Mark Nauwelaerts
16b57b49c9
matroskademux: handle bogus files storing ADTS AAC data
2010-07-16 13:59:22 +02:00
Mark Nauwelaerts
18f37ffc9a
matroskademux: do not error out on a block with unknown tracknumber
2010-07-16 13:58:39 +02:00
Mark Nauwelaerts
bbded080e0
qtdemux: do not align reverse playback reference stream twice
...
Timestamp rounding issues could lead to going backwards 2 keyframe periods
(rather than only 1). While this is not necessarily a problem, it might
potentially place additional (buffering) load on downstream and could be
avoided (because We Can).
Fixes #623629 .
2010-07-16 13:58:34 +02:00
Mark Nauwelaerts
2a22e9d487
qtdemux: convert some more mov format timestamp to gst time
2010-07-16 13:58:21 +02:00
Mark Nauwelaerts
7955c01f19
avidemux: additional verification heuristics for VBR audio stream
...
Check for and override some header field(s) for reasonable values, according
to later expected use in calculations.
2010-07-16 13:58:12 +02:00
Alessandro Decina
d5a4da9a69
videobalance: Fix wrong lock order that could lead to a deadlock. Fixes #624331 .
2010-07-16 12:45:35 +02:00
Arun Raghavan
8aed3176ce
qtdemux: Fix order of bitrates in 'btrt' atom
...
There seems to be a bug in libmp4v2 that generates a MPEG4BitRateBox as
(bufferSizeDB, avgBitrate, maxBitrate) instead of (bufferSizeDB,
maxBitrate, avgBitrate), according to the spec. I used the mp4file
output while writing this code, so the order is wrong. This patches
fixes that.
https://bugzilla.gnome.org/show_bug.cgi?id=623654
2010-07-06 10:33:16 +01:00
Edward Hervey
fcf1995020
qtdemux: strip out bogus tags from XMP atom
...
https://bugzilla.gnome.org/show_bug.cgi?id=623366
2010-07-02 14:39:36 +02:00
Andrzej K. Haczewski
0b5172eb06
flvmux: Write duration at the correct position
2010-07-02 14:25:22 +02:00
Thijs Vermeir
244a35a226
rtpptdemux: fix memleak on custom downstream events
...
by not sending custom downstream event twice and fix memleak when
not handling the event
https://bugzilla.gnome.org/show_bug.cgi?id=623196
2010-06-30 12:39:09 +02:00
Tim-Philipp Müller
c66c3d354c
wavparse: fix unportable printf format specifiers in commented out code
...
To avoid false positives when grepping for unportable specifiers.
2010-06-29 20:14:53 +01:00
Tim-Philipp Müller
cf8dddd5c7
goom: don't allocate 260kB struct on the stack
...
PluginInfo is quite a sizeable struct, let's not allocate it on the
stack, especially not if we're copying it over into another dynamically
allocated copy anyway.
Fixes #570761 .
2010-06-28 14:59:25 +01:00
Tim-Philipp Müller
240dec038c
gst: update orc files
2010-06-26 18:41:49 +01:00
Sebastian Dröge
8172c478aa
matroskamux: Fix leaking of the streamheader buffers
...
gst_value_set_buffer() increases the refcount and doesn't
take ownership of the buffer.
2010-06-25 19:40:06 +02:00
Tim-Philipp Müller
19216e7218
matroska, videobox, videofilter: fix compiler warnings when debugging is disabled in gstreamer
...
Fixes unused variable warnings when GStreamer's debugging system has been disabled.
2010-06-24 16:34:03 +01:00
Michael Grzeschik
b26785d9f9
reset the have_index flag at transition PAUSED_TO_READY
...
If we restart the Stream in the case of doing a transition from
PAUSED_TO_READY and back with READY_TO_PAUSED aso. the duration of the video
will get calculated even if we have a avi header with that information.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
2010-06-23 21:40:50 +02:00
Sebastian Dröge
7e0ea232d0
videobox: Fix negotiation for I420/YV12
...
We don't support conversion into *all* YUV
formats for them, only into I420/YV12/AYUV.
Fixes bug #622501 .
2010-06-23 20:30:11 +02:00
Mark Nauwelaerts
0a2d9a2269
wavparse: proper closing segment construction
...
Fixes #618982 .
2010-06-22 15:37:46 +02:00
Wim Taymans
5534c7d91d
rtspsrc: fix locking after moving things around
2010-06-18 20:04:08 +02:00
Wim Taymans
651c82a01f
rtspsrc: make some errors as warnings
...
Avoid spamming the testsuite with these error debug lines.
2010-06-18 16:56:19 +02:00
Keith Nicholson
0773eed960
udpsrc: fix multicast support on windows builds
...
On windows builds, sets source address for bind to INADDR_ANY, while
maintaining the original multicast group address for subsequent join.
Fixes #595978
2010-06-18 16:49:08 +02:00
Wim Taymans
e25cdc31d3
udp: make url parsing compatible with VLC syntax
...
Skip everything before the @ sign in the url location. VLC uses that as the
remote address to connect to (but we ignore it for now). This makes our udp urls
compatible with the ones used by VLC.
Fixes #597695
2010-06-18 16:16:28 +02:00
Wim Taymans
966ced2208
rtspsrc: factor out the connections
...
Keep a global connection for aggregate control but also keep stream connections
for non-aggregate control.
Add some helper methods to connect/close/flush the connections.
2010-06-18 15:13:06 +02:00
Wim Taymans
ddc214d322
rtspsrc: add non-aggregate control
...
Add non-aggregate control.
Separate retrieving thr SDP from parsing and setting up the streaming from the
SDP.
2010-06-18 15:13:06 +02:00
Zaheer Abbas Merali
8269a028a0
flvmux: add documentation for streamable property
2010-06-17 17:24:22 +01:00
Sebastian Dröge
968ce701a7
matroskademux: Fix an uninitialized variable compiler warning
2010-06-17 10:44:33 +02:00
Sebastian Dröge
f44e5e630b
ebml-read: Zero-sized ints/uints/floats have a value of 0 according to the EBML spec
2010-06-16 21:02:13 +02:00
Sebastian Dröge
e4a5f0911e
matroskademux: Fix possible NULL pointer dereference and assertion that could be caused by invalid files
2010-06-16 20:02:58 +02:00
Sebastian Dröge
20b9022289
matroskademux: Clean up/fix some minor error handling bugs
2010-06-16 19:50:34 +02:00
Sebastian Dröge
711e0cc90b
audioiirfilter: Fix possible NULL pointer dereference
2010-06-16 19:24:54 +02:00
Sebastian Dröge
1f545da974
warptv: Don't use floats as loop counters
2010-06-16 19:20:02 +02:00
Mark Nauwelaerts
a69e419c8e
avidemux: improve audio vbr detection
...
Subsequent entry time calculations use blockalign value to determine
number of frames per chunk, and blockalign == 1 is then most unlikely to result
in reasonable values (which also aligns with "spec").
2010-06-16 15:53:47 +02:00
Mark Nauwelaerts
6a9c70486f
rtph264depay: tweak DELTA_UNIT labeling
...
Consider SPS, PPS and IDR as keyframe, all others as DELTA_UNIT.
See #620154 .
2010-06-16 15:53:45 +02:00
Sebastian Dröge
e49d8a286b
avidemux: Assign variables before printing them
2010-06-15 20:04:35 +02:00
Sebastian Dröge
715eb33d24
wavparse: Initialize uninitialized variable
2010-06-15 20:00:28 +02:00
Edward Hervey
342543325b
matroska: Fix unitialized variable
2010-06-15 17:20:20 +02:00
Wim Taymans
e6ec5cce2e
rtspsrc: respect aggregate control attributes
...
when the SDP specifies an aggregate control url, use that for playback
control.
Fixes #619531
2010-06-14 19:24:14 +02:00
Sebastian Dröge
ff755250c3
goom: Call orc_init() before trying to get target flags
2010-06-14 15:38:02 +02:00
Sebastian Dröge
a11b271bf4
deinterlace: Call orc_init() before trying to get target flags
2010-06-14 15:38:02 +02:00
Zaheer Abbas Merali
e49c31fd25
matroskamux: revert change that set a reserved flag on the Block.
...
So matroska's Block structure has no keyframe flag, only the SimpleBlock has it.
To detect keyframes in Blocks, it is just the BlockGroup container that needs
to have a ReferenceBlock attached if it is a delta frame in video.
2010-06-14 14:28:53 +01:00
Mark Nauwelaerts
dde3825405
rtph264depay: also consider AU and SEI NALUs as DELTA_UNIT
...
Fixes #620154 .
2010-06-14 11:49:42 +02:00
Stefan Kost
a1da36d5a6
build: include stdio.h for sscanf
2010-06-12 21:26:16 +03:00
Tim-Philipp Müller
97a2111c58
rtpmparobustdepay: don't try to unref NULL buffers
...
Fixes generic/states unit test.
2010-06-11 21:18:52 +01:00
Tim-Philipp Müller
754f3a315b
wavparse: use typefind functions to check if PCM data contains dts stream
...
Use new dts audio typefinder from -base to check if the PCM data
contains a dts stream. This way we recognise more varieties more
reliably and also detect the dts stream if there isn't a frame
sync right at the start of the data.
Fixes #413942 .
2010-06-11 20:50:23 +01:00
Tim-Philipp Müller
12ec2c3d6d
wavparse: set buffer offsets before using the buffer for the first time
...
gst_type_find_helper_for_buffer() will need the correct offset
set on the buffer (ie. 0) and not the byte offset we started
pulling the data from.
2010-06-11 20:47:22 +01:00
Mark Nauwelaerts
815e06ba55
rtp: add mpa-robust depayloader
...
Fixes #589997 .
2010-06-11 11:45:48 +02:00
Mark Nauwelaerts
de5cb168ee
avimux: fix avi header bytewriting
...
... by using proper offsets for tag list writing.
Also use _reset rather than _free and consistently use bytewriter position.
See #619293 .
2010-06-11 10:57:41 +02:00
Sebastian Dröge
e84136ba03
videomixer: Port most blending related functions to orc
...
Only remaining MMX implementation is the ARGB/BGRA/AYUV blending
for which we first need the orc compositing opcodes.
2010-06-10 22:46:00 +02:00
Sebastian Dröge
e87802efdd
videomixer: Replace some tabs by spaces
2010-06-10 22:46:00 +02:00
Zaheer Abbas Merali
823a514161
matroskamux: some non-delta buffers were not marked as keyframes
2010-06-10 01:32:15 +02:00
Zaheer Abbas Merali
45f711044f
matroskamux: change 2 second limit per cluster
...
Start cluster at every keyframe or when we would overflow the previous
cluster's relative timestamp field. This would avoid as much as possible
starting clusters at non-keyframes.
2010-06-10 01:32:15 +02:00
Sebastian Dröge
b7d435911f
auto{audio,video}sink: Don't lose the GST_ELEMENT_IS_SINK flag after removing the child
2010-06-09 20:23:16 +02:00
Zaheer Abbas Merali
f22c7d0f7c
matroskamux: change indexed property to streamable
...
The property streamable has reverse semantics to indexed.
2010-06-09 15:42:19 +02:00
Thiago Santos
c27dc49bf7
flvmux: Rename unreleased property 'indexed' to 'streamable'
...
Rename 'indexed' to 'streamable' for a better name while it
hasn't been released
2010-06-09 09:13:09 -03:00
David Schleef
bd893e4dfb
level: remove unused liboil include
2010-06-08 17:25:35 -07:00
David Schleef
b83cd99aeb
videomixer: liboil to orc conversion
2010-06-08 17:25:35 -07:00
David Schleef
4e84ab1f87
videobox: liboil to orc conversion
2010-06-08 17:25:35 -07:00
David Schleef
2cb6cfed22
goom: liboil to orc conversion
2010-06-08 17:25:34 -07:00
David Schleef
9ff3ef0c92
deinterlace: orcify some deinterlacing methods
2010-06-08 17:25:34 -07:00
David Schleef
f14972bf20
deinterlace: convert from liboil to orc
2010-06-08 17:25:34 -07:00
Zaheer Abbas Merali
44c911d255
flvmux: Add indexed property to replace disabled is-live.
...
Add indexed property to be the negation of what the disabled is-live property
was. Fixes bug #613066 .
2010-06-08 14:12:16 +02:00
Sebastian Dröge
48934764e7
flvdemux: Don't handle non-TIME seeks
...
Don't send them upstream because for upstream a BYTES seek
might make sense but is completely wrong because upstream
can't seek to a byte position of the audio or video stream.
Also don't build the index in push mode for non-TIME seeks,
things will go wrong here otherwise.
2010-06-07 18:34:11 +02:00
Sjoerd Simons
c39e82a1ce
Cope with short startcodes in the h264 bytestream
2010-06-07 10:28:06 +02:00
Sebastian Dröge
f16ed4a91c
gst: Don't use GST_DEBUG_FUNCPTR for GObject vfuncs
2010-06-06 17:52:40 +02:00
Philip Jägenstedt
21c84e23e8
matroskademux: refactor delta unit handling
...
This allows us to skip delta units earlier and is a bit clearer in my
opinion. It also makes only video buffers ever be delta units, not
just for SimpleBlock as before.
2010-06-06 15:38:00 +02:00
Sebastian Dröge
6e9e48c0b9
flvdemux: Clear adapter on discontinuities
2010-06-06 15:17:00 +02:00
Philip Jägenstedt
b2ff8042d3
matroskademux: Ignore keyframe flag for non-video streams
...
When the keyframe bit of SimpleBlock Flags wasn't set, the buffer was being
marked with GST_BUFFER_FLAG_DELTA_UNIT, causing all buffers to be skipped
after a seek. This may be a problem with the Sorenson Squish encoder, but
arguably the keyframe bit should only be applied to video.
Fixes bug #620358 .
2010-06-06 14:59:29 +02:00
Sebastian Dröge
0fe56cc0d6
flvdemux: First try upstream when handling seek events/queries
2010-06-06 14:57:27 +02:00
Tristan Matthews
8e0adba996
gstrtpceltpay: don't always fixate sink caps to 1 channel
...
The getcaps function should not fixate the channels field until we
get the encoding-params field from our srcpad's caps. Fixes #620591
2010-06-05 10:02:35 +02:00
Wim Taymans
cb8252275d
rtsp: try all ranges from the sdp
...
Try all ranges in the SDP before giving up.
2010-06-04 13:58:38 +02:00
Wim Taymans
6fbca707bb
rtspsrc: make parse_range return result
...
Make the parse_range function return if the parsing succeeded or failed.
2010-06-04 13:58:38 +02:00
Edward Hervey
2ff87c0fb9
videomixer: if we're not linked downstream, we can do any format
...
Stupid me, assuming _get_allowed_caps() would actually return the
pad templates if there was no peer.
2010-06-04 11:44:09 +02:00
Sjoerd Simons
952fd666b3
Keep announcing the delivery-method in the capabilities
...
Even though we don't use delivery-method in our payloader, older versions of
the theora payloader in gstreamer required it. As such we need to keep this
around in the caps for backwards-compatibility.
This reverts part of 49463a37cb
Fixes #618940
2010-06-03 18:47:40 -04:00
Wim Taymans
ffc06e17f0
mp4gdepay: calculate the frame duration correctly
...
When we calculate the frame duration, we need to use the amount of
frames in the _previous_ packet, not the current packet. The frame duration is
needed to correctly de-interleave interleaved streams. This fixes the case where
there are a variable number of frames in a packet.
Fixes #620494
2010-06-03 19:39:04 +02:00
Edward Hervey
d72a2fb6da
videomixer: Don't return caps in get_caps() that will be rejected
...
This commit basically puts _get_caps() in sync with accept_caps().
If we don't have a master pad OR the master pad caps aren't negotiated
then we just return the downstream allowed caps.
If we have a master pad with negotiated caps, we return those caps
with a free range of width/height/framerate
2010-06-03 19:01:14 +02:00
Mark Nauwelaerts
a8ffe6f593
flvdemux: delayed seek handling also deserves TRUE event response
2010-06-02 17:27:22 +02:00
Thijs Vermeir
0bb2be3a7e
rtpjitterbuffer: fix compiler warning
...
unused variable ‘estimated’
2010-06-02 15:32:36 +02:00
Alessandro Decina
4b6cb93025
rtpjitterbuffer: stop buffering and emit EOS at the end of a stream
...
When using RTP_JITTER_BUFFER_MODE_BUFFER, make sure that the ringbuffer doesn't
get stuck buffering forever when there isn't enough data left to fill the
buffer.
2010-06-02 14:21:16 +02:00
Benjamin Otte
d516fc5fd8
debugutils: Don't consume preroll buffer twice
2010-06-02 14:20:26 +02:00
Benjamin Otte
81c4dc4574
debugutils: Replace md5 implementation with glib's
...
https://bugzilla.gnome.org/show_bug.cgi?id=619824
2010-06-02 14:20:26 +02:00
Mark Nauwelaerts
53365b91e6
avimux: clean up code for avi header using a bytewriter
...
https://bugzilla.gnome.org/show_bug.cgi?id=619293
2010-06-02 14:20:26 +02:00
Edward Hervey
59dcdc37a0
videomixer: filter caps returned from downstream with our pad template.
2010-06-01 20:45:29 +02:00
Zaheer Abbas Merali
bfaeffcfd0
matroskamux: Remove more unneeded warnings
2010-06-01 16:56:32 +01:00
Zaheer Abbas Merali
7fc21317af
matroskamux: remove unneeded warning
2010-06-01 16:54:03 +01:00
Zaheer Abbas Merali
d73cecd8c0
matroskamux: remove unneeded debug statement
2010-06-01 16:49:14 +01:00
Zaheer Abbas Merali
8c165b49a7
matroskamux: change is-live property to indexed
2010-06-01 16:43:04 +01:00
Zaheer Abbas Merali
3d876d2b16
matroska: use the uint64 scaling functions
...
In demuxer and muxer use the gst_util_uint64 scaling functions rather than
standard integer division. Add warnings (to be changed to debug) for debugging
the timestamp and duration.
2010-06-01 16:43:04 +01:00
Zaheer Abbas Merali
ec23b22d29
matroskamux: set delta unit on all buffers except cluster start ones
2010-06-01 16:43:04 +01:00
Zaheer Abbas Merali
d3daa12473
matroskamux: store caps and set on buffers rather than using pad caps
2010-06-01 16:43:03 +01:00
Zaheer Abbas Merali
b4e6fcd051
matroskamux: make sure pads caps are set before any buffers pushed.
2010-06-01 16:43:03 +01:00
Zaheer Abbas Merali
7c402d5866
matroskamux: add streamheaders
2010-06-01 16:43:03 +01:00
Zaheer Abbas Merali
d0bf310876
matroskamux: no need to set cache twice
2010-06-01 16:43:03 +01:00
Xavier Queralt
40eda471a1
Do not create a SeekHeader, Cues, .. when doing live
2010-06-01 16:43:03 +01:00
Xavier Queralt
032d9b90ff
Add is-live property
2010-06-01 16:43:02 +01:00
Mark Nauwelaerts
44fa95d5cb
matroskademux: improve reverse playback
...
Slightly modify approach to also handle cases where cue entries do not reliably
lead to initial keyframes.
Fixes #619817 .
2010-06-01 15:56:34 +02:00
Mark Nauwelaerts
69d47ef4a0
deinterlace: avoid gtk-doc confusing comments
2010-06-01 15:56:25 +02:00
Mark Nauwelaerts
b8fd1a91f1
matroskamux: use write caching also when writing buffer data
...
Specifically, this reduces pushing several small buffers for each
data buffer and also avoids a seek for each buffer altogether
(though a seek is still needed for each cluster).
Fixes #619273 .
2010-06-01 15:54:35 +02:00
Mark Nauwelaerts
81bf657aa7
matroskamux: fix ebml write caching with bytewriter implementation
...
Also cache a bit more during header writing.
Fixes #619273 .
2010-06-01 15:53:43 +02:00
Mark Nauwelaerts
7895ddbc38
matroskamux: use consistent debug category name for ebmlwrite
2010-06-01 15:53:37 +02:00
Mark Nauwelaerts
085e333283
matroskademux: use bytereader based GstEbmlRead as a helper
...
... rather than basing on it by inheritance.
Also use more common code for push and pull mode.
Fixes #619198 .
Fixes #611117 .
2010-06-01 15:52:12 +02:00
Mark Nauwelaerts
973c8ddfdf
matroskamux: _get_pad_template result needs no unref
2010-06-01 15:51:16 +02:00
Edward Hervey
01abf5b94e
videomixer: Implement sinkpad GetCapsFunction.
...
This allows returning only the formats, width, height, framerate
and pixel-aspect-ratio that downstream can support.
https://bugzilla.gnome.org/show_bug.cgi?id=620148
2010-06-01 12:42:10 +02:00
Sebastian Dröge
0d5ae784b1
matroskademux: Don't compare running times with stream times when doing QoS
2010-06-01 11:21:30 +02:00
Sebastian Dröge
d09ff4124e
deinterlace: Don't reconfigure the caps when changing properties
...
Fixes bug #619848 .
2010-06-01 11:21:30 +02:00
Sebastian Dröge
ab3b4bc82f
alpha: Add property to allow passthrough mode
...
This passthrough mode is used if the alpha method is "set"
and the alpha value is 1.0.
Fixes bug #617512 .
2010-06-01 11:21:29 +02:00
Alexander Kojevnikov
2d13b15376
spectrum: support 24-bit width
...
Fixes #619045
2010-06-01 11:21:29 +02:00
Alexander Kojevnikov
c69dd320af
spectrum: support arbitrary bit depth
...
Partially fixes #619045
2010-06-01 11:21:29 +02:00
Philip Jägenstedt
596331c6f0
matroskademux: fix deadlock introduced by video keyframe QoS
2010-06-01 11:21:29 +02:00
Philip Jägenstedt
80926a5596
matroskademux: skip buffers before a late keyframe (QoS)
...
Before, vp8dec had no option but to decode all frames even if some/all
of them would be late. With this change, performance when keyframes are
frequent is helped a great deal. On my Thinkpad X60s, decoding a 20 s
1080p sunflower encode with keyframes every 10 frames went from taking
42 s with 5 frames shown to 21 s with 15 frames shown (still slow
enough to count by hand). When keyframes are more sparse, you will
still be able to catch up eventually, but the results won't be as
noticable.
2010-06-01 11:21:29 +02:00
Sebastian Dröge
f5bca501e5
videomixer: Don't mix input with different pixel aspect ratios
...
Fixes bug #618530 .
2010-06-01 11:21:29 +02:00
Sebastian Dröge
dc6dd62824
deinterlace: Add MMX/3DNow implementations of greedyh for UYVY
2010-06-01 11:21:29 +02:00
Sebastian Dröge
2096cf6e55
deinterlace: Fix UYVY implementation of greedyh to be actually used
2010-06-01 11:21:29 +02:00
Tim-Philipp Müller
97de4b217d
Revert "matroska: add temporary webm typefinder"
...
This reverts commit d148ec0ad2
.
We depend on -base git now, which has a webm typefinder in the usual
place.
2010-06-01 09:39:38 +01:00
Tim-Philipp Müller
d51576b14c
Revert "avimux, flvmux, matroskamux: don't crash if tags arrive on multiple input pads at the same time"
...
This reverts commit 6a9983cd20
.
Rely on locking done in GstTagSetter in core git.
2010-06-01 09:39:38 +01:00
Sebastian Dröge
f8c906e475
flvdemux: Fix position query
2010-05-29 13:55:07 +02:00
Tim-Philipp Müller
a9c13cd4f7
docs: remove unnecessary videorate element from webmmux example pipeline
2010-05-28 15:14:32 +01:00
Sebastian Dröge
ad9ffeed03
videobox: Fix floating point to integer conversion for the alpha values
...
Fixes bug #619835 .
2010-05-27 18:33:35 +02:00
Mark Nauwelaerts
3462eed7e0
wavparse: handle truncated input data at EOS in pull mode
...
Fixes #617733 .
2010-05-26 12:01:26 +01:00
Robert Swain
50273537dc
qtdemux: Round timestamp up when scaling to mov format
...
Fix timestamp rounding to allow the correct index to be located.
The issue was that scaling from GStreamer time format to mov time format was
rounding down causing the timestamp of the newsegment event received after a
flushing keyframe seek to find the sample index before the one it should
causing further backward seeking to the keyframe prior until no rounding error
occurred.
Rounding up when scaling to mov format has the desired effect, and it is
not clear whether just the _round () variant would be sufficient.
Fixes bug #619105
2010-05-26 00:08:16 +01:00
Tim-Philipp Müller
6a9983cd20
avimux, flvmux, matroskamux: don't crash if tags arrive on multiple input pads at the same time
...
This is a temporary fix for the release only.
Fixes #619533 .
2010-05-26 00:05:54 +01:00
Wim Taymans
49463a37cb
rtptheora: remove delivery-method from caps
...
We can accept all delivery methods so don't advertise anything on the caps or
parse anything, we will handle whatever we receive.
Fixes #618940
2010-05-25 18:53:48 +02:00
Tim-Philipp Müller
d148ec0ad2
matroska: add temporary webm typefinder
...
Add webm typefinder just for the release, so webm works for
people whose distros don't patch gst-plugins-base as well.
We'll remove this again after the release.
2010-05-25 15:40:01 +01:00
Tim-Philipp Müller
9bdfc7254a
docs: add some pipeline examples to webmmux docs
2010-05-23 11:17:27 +01:00
Tim-Philipp Müller
a4fabfb959
matroska: fix up plugin and element descriptions a bit
2010-05-21 15:06:14 +01:00
Tim-Philipp Müller
0e12bf83a3
matroska: move webmmux into own source files
...
Makes things easier for gtk-doc.
2010-05-21 15:04:48 +01:00
Sebastian Dröge
82e4807d10
matroska: Remove the doctype enum, it's not needed anymore
2010-05-20 21:49:43 +02:00
Sebastian Dröge
6a25cd475c
webmmux: Add new webmmux element that only supports muxing of WebM
...
...and remove the doctype property from matroskamux again.
2010-05-20 21:49:43 +02:00
Philip
9c59da8601
ebmlread: rm floatcast.h include (not used)
2010-05-19 20:38:50 +02:00
Philip Jägenstedt
cbde946768
matroskamux: bump default doctype version to 2
...
In this day and age this should be safe. There's otherwise a risk people
will be creating unneccessarily big WebM files as they can't use
SimpleBlock in v1.
2010-05-19 20:38:31 +02:00
Philip Jägenstedt
9610c7f354
matroska: handle matroska and webm doctype versions equally
...
The original plan was to let WebM v1 be the same as Matroska v2 (with
extra constraints), but for simplicity it was decided to handle the
versions equally, such that e.g. SimpleBlock is only allowed in WebM v2.
2010-05-19 20:38:16 +02:00
Philip Jägenstedt
081f2d00aa
matroskademux: Verify lace size in _parse_blockgroup_or_simpleblock
...
Failure to do this for corrupt input can cause a subbuffer bigger
than the actual buffer to be created, quickly leading to segfault.
Test case:
bug_s222005751_r0.001____memcpy.webm
2010-05-19 20:35:52 +02:00
Philip Jägenstedt
c659c92091
ebml: crude hack to avoid crashing on unexpected metadata
...
The comment says this cannot happen, but it did and I don't know
why. This is not the correct fix, needs investigation. Test case:
bug_s555010094_r0.0005:0.008____IA__g_assertion_message_expr.webm
2010-05-19 20:35:28 +02:00
Philip Jägenstedt
9c1267b1a9
ebml: don't modify out str if returning an error in _read_ascii
...
This is a regression from ASCII validation changes. Test case:
bug_s66876390_r0.001____malloc_printerr.webm
2010-05-19 20:35:06 +02:00
Philip Jägenstedt
c712d28796
ebml: Validate 7-bit ASCII in gst_ebml_read_ascii
...
This was triggering an UTF-8 assertion in gst_caps_set_simple for
corrupt files with garbage as codec id. Test case:
gstreamer_error_trying_to_set_invalid_utf8_as_codec_id.webm
Old gst_ebml_read_ascii renamed to gst_ebml_read_string, also used by
gst_ebml_read_utf8. Unlike for UTF-8, failure to validate is an error,
as gst_ebml_read_ascii is used for reading doctype and codec id and we
might just as well give up early in those cases.
2010-05-19 20:33:38 +02:00
Philip Jägenstedt
d146971128
matroskademux: Ignore unexpected CodecState
...
Because GstMatroskaTrackContext *stream is set up in the first
SimpleBlock or Block, a rogue CodecState otherwise causes a segfault on
derefencing the NULL pointer. Test case:
bug_s5506167_r0.001____gst_matroska_demux_parse_blockgroup_or_simpleblock.webm
2010-05-19 20:33:35 +02:00
Philip Jägenstedt
9dc7889eea
matroskademux: Add video/webm sink caps
2010-05-19 20:32:13 +02:00
Philip Jägenstedt
ad05dfc032
matroskamux: Use SimpleBlock for WebM when possible
2010-05-19 20:32:02 +02:00
Philip Jägenstedt
1daeb26df1
matroskademux: Support "webm" DocType
2010-05-19 20:31:36 +02:00
Philip Jägenstedt
3b4759de18
matroskamux: rename matroska_version to doctype_version
2010-05-19 20:29:19 +02:00
Philip Jägenstedt
27069088db
matroskamux: Support "webm" DocType
2010-05-19 20:28:42 +02:00
David Schleef
e847957790
qtdemux: Add VP8
2010-05-17 17:18:25 +02:00
Sebastian Dröge
e5e90f6035
matroskamux: Add support for On2 VP8
...
...matroskademux automatically supports it through libgstriff.
2010-05-17 17:18:24 +02:00
Sebastian Dröge
d1842481c1
avimux: Add support for On2 VP8
...
...avidemux automatically supports it through libgstriff.
2010-05-17 17:18:24 +02:00
Wim Taymans
dc2662e22b
rtpbin: fix docs
...
Documentation error spotted by tony <caicai0119 at gmail.com>
Fixes #618419
2010-05-13 13:01:26 +02:00
Olivier Crête
28f509fdca
rtptheoradepay: make delivery-method parameter optional
...
It probably will not be in the final RFC as it is not in RFC 5215 for Vorbis.
If there is a configuration specified, assume it is in-line and if nothing is
specified, assume it is in-band.
https://bugzilla.gnome.org/show_bug.cgi?id=618386
2010-05-13 12:22:36 +02:00
Wim Taymans
3e4bc043a5
celtpay: fix queue duration calculations
...
Don't blindly add the durations of incomming buffers to the total queued
duration because it might be invalid. Mark the total queued duration invalid
when we receive an invalid incomming timestamp because that's when we lose track
of the total queued duration.
Fixes #618324
2010-05-13 11:30:27 +02:00
Mark Nauwelaerts
4cff2e2c67
rtph264pay: extract SPS and PPS from property provided parameter set
...
... so it can also be regularly inserted into the stream if so configured.
Fixes #617164 .
2010-05-12 10:24:10 +02:00
Tim-Philipp Müller
c209a6ab40
rtp: dist missing header file to fix make distcheck
2010-05-11 20:26:37 +01:00
Mark Nauwelaerts
bcde9fab09
qtdemux: fix push based seeking
...
... where it comes down to transforming incoming BYTE segment
to a corresponding TIME segment.
Also fixes #609405 .
2010-05-11 18:44:01 +02:00
Sebastian Dröge
2e5262cda2
imagefreeze: Set fixed caps on the correct pad
...
This makes the sink getcaps function actually used instead of using
the fixed caps function for it.
2010-05-11 14:31:44 +01:00
Sebastian Dröge
f9d8174471
imagefreeze: Only start the task after a seek if a buffer was received already
2010-05-11 14:31:44 +01:00
Sebastian Dröge
3e574eafe3
imagefreeze: Set undefined framerate in sink getcaps function
2010-05-11 14:31:43 +01:00
Sebastian Dröge
53de7943c7
imagefreeze: Implement reverse playback and set buffer offsets
2010-05-11 14:31:43 +01:00
Sebastian Dröge
f1e07fcd0f
imagefreeze: Add still frame stream generator element
2010-05-11 14:31:43 +01:00
Tim-Philipp Müller
f9ced7df94
Move capsfilter element from -bad to -good
...
Hook up moved files to the build infrastructure and docs.
Fixes #617739 .
2010-05-11 14:31:43 +01:00
Sebastian Dröge
5aacc8dd29
capssetter: Some minor cleanup
2010-05-11 14:31:43 +01:00
Benjamin Otte
076d3ff456
gst_element_class_set_details => gst_element_class_set_details_simple
2010-05-11 14:31:43 +01:00
Mark Nauwelaerts
8217895170
capssetter: import element into -bad
2010-05-11 14:31:43 +01:00
Mark Nauwelaerts
5ae7119d11
avimux: check that pads have been negotiated
...
Also set fcc_handler field in audio stream header.
Fixes #618351 .
2010-05-11 13:58:03 +02:00
Mark Nauwelaerts
e934f637b6
qtdemux: fix partial parsing of ctts table
...
Fixes #616516 .
2010-05-11 11:06:20 +02:00
Mark Nauwelaerts
a9e688cf32
qtdemux: cleanup a comment and add some debug and conditional compilation
2010-05-11 11:06:17 +02:00
Jan Urbański
cf57f1b220
flvmux: only store the last buffer timestamp if it's valid
...
Fixes bug #618305
2010-05-11 06:35:48 +02:00
Olivier Crête
34d0d59142
rtph264pay: Re-send SPS/PPS when requested
...
https://bugzilla.gnome.org/show_bug.cgi?id=606689
2010-05-10 15:07:09 +02:00
Mark Nauwelaerts
90311e522f
rtph264pay: fix typo in debug message
2010-05-10 13:35:55 +02:00
Mark Nauwelaerts
af6fc84377
rtptheorapay: add config-interval parameter to re-insert config in stream
...
Add a new config-interval property to instruct the payloader to insert
configuration headers at periodic intervals in the stream
(when a keyframe is countered).
2010-05-10 13:35:52 +02:00
Mark Nauwelaerts
14b14fdf7a
rtptheoradepay: fix in-band configuration parsing
...
Also make configuration header parsing a bit more relaxed with respect
to length field interpretation.
2010-05-10 13:35:50 +02:00
Mark Nauwelaerts
b899afaeb6
rtpvorbisdepay: fix in-line configuration parsing
...
Also make configuration header parsing a bit more relaxed with respect
to length field interpretation.
2010-05-10 13:35:48 +02:00
Mark Nauwelaerts
7bd3943bb9
rtptheorapay: do not discard downstream flow return
2010-05-10 13:35:44 +02:00
Mark Nauwelaerts
53928a74fa
rtptheorapay: refactor buffer payloading
2010-05-10 13:35:41 +02:00
Sebastian Dröge
a9ed56b1ad
deinterlace: Add support for UYVY
2010-05-07 20:41:31 +02:00
Wim Taymans
50f26c671b
rtpsession: fix return value
2010-05-07 19:06:35 +02:00
Wim Taymans
a50cd7c27d
rtspsrc: don't leak the session
2010-05-07 19:02:21 +02:00
Wim Taymans
bc72d8250c
rtsp: configure bandwidth properties in the session
2010-05-07 18:59:42 +02:00
Wim Taymans
aadf4ddf7e
rtpsession: add properties to configure the bandwidth
...
Add properties to proxy the bandwidth configuration to the session object.
2010-05-07 18:58:58 +02:00
Wim Taymans
69cde0e874
rtpsession: add properties to configure bandwidths
...
Add properties to configure the sender and receiver bandwidths.
Configure the bandwidths before calculating the RTCP timeout when we need to.
2010-05-07 18:57:13 +02:00
Wim Taymans
d84dc1112d
rtpstats: add some debug info
2010-05-07 18:56:30 +02:00
Wim Taymans
5690331c9e
rtpsession: small cleanups
2010-05-07 18:55:34 +02:00
Wim Taymans
0da5cf2e21
rtpstats: make bandwidths more configurable
...
Add a method to configure the various bandwidths in the session.
2010-05-07 16:55:13 +02:00
Wim Taymans
6eee730c4a
rtpsession: handle NONE RTCP intervals
...
Prepare for handling RTCP reporting intervals of GST_CLOCK_TIME_NONE, which
means don't send RTCP at all.
2010-05-07 13:32:30 +02:00
Wim Taymans
db3c4e7f46
rtspsrc: fall back to SDP ports instead of server_port
...
In multicast, fall back to the ports in the SDP instead of the server_port
attribute as this is more in line with the RFC.
2010-05-07 12:51:05 +02:00
Wim Taymans
4e1ced0a77
rtspsrc: refactor collecting the transport info
...
Make a method to collect the ports and destination address.
2010-05-07 12:24:51 +02:00
Wim Taymans
05352d7ea8
rtspsrc: handle servers that send broken Transports
...
Handle servers that send their port pairs with the wrong name.
Fixes #617537
2010-05-07 11:28:36 +02:00
Wim Taymans
ef4d2901aa
rtspsrc: use the SDP connection info in multicast
...
Parse the connection info from the SDP.
When we need to configure the multicast destination, fall back to the SDP
connection info when the transport did not specify a destination and ttl.
Fixes #617537
2010-05-06 16:52:26 +02:00
Stefan Kost
de4b0ef7dd
goom,monoscope: truncate own caps, instead of copying and using the first only
...
We got the caps from an intersect, it is our own, hence we can truncate it.
2010-05-06 15:43:54 +03:00
Stefan Kost
899d03dcc6
auto{audio,video}{src,sink}: use can_intersect to avoid a caps copy
2010-05-06 15:43:53 +03:00
Stefan Kost
0148a230ac
flvdemux: tell what we can do
...
Any-caps are bad. If apps scan the registry, they'd like to know what we can
output.
2010-05-06 15:43:53 +03:00
Sebastian Dröge
85c6b9b712
videomixer: Make selection of a sinkpad number threadsafe
2010-05-05 19:35:48 +02:00
Sebastian Dröge
9d6e4a7ac8
deinterlace: Add support for all common RGB formats
2010-05-05 17:39:32 +02:00
Sebastian Dröge
848f071ef4
deinterlace: Add support for AYUV
2010-05-05 16:06:51 +02:00
Wim Taymans
d6579912cb
rtspsrc: make setup url in a smarter way
...
Make sure we always separate the base and control url parts with a / when
creating the setup url.
2010-05-04 16:36:15 +02:00
Alessandro Decina
c8a02a91a6
rtspsrc: handle SEEKING queries.
2010-05-04 16:05:13 +02:00
Mark Nauwelaerts
220f865f77
rtpmp4vpay: add config-interval parameter to re-insert config in stream
...
Add a new config-interval property to instruct the payloader to insert
config (VOSH, VOS, etc) at periodic intervals in the stream
(when a GOP or VOP-I is encountered).
Based on patch by <marc.leeman at gmail.com>
Fixes #607452 .
2010-05-04 11:19:43 +02:00
Alessandro Decina
40899379c0
rtpjitterbuffer: move some initialization code from change_state to _init.
...
Set ->active to TRUE in _init so it can be set to FALSE after creating the
jitterbuffer and it won't be mistakenly reset to TRUE in the change_state
function.
This is needed to start the jitterbuffer as inactive when rtpbin is buffering.
2010-05-03 13:34:59 +02:00
Alessandro Decina
ffc2da30fc
rtpbin: fix a bug handling BUFFERING messages.
...
If a session exists but has no streams, set the min buffering percent to 0
since it means that we haven't received anything for that session yet.
2010-05-03 11:56:58 +02:00
Alessandro Decina
f6e9f359b9
rtpbin: when a stream is created, pause the jitterbuffer if rtpbin is buffering.
2010-05-03 11:51:37 +02:00
Alessandro Decina
38a5b08ef2
rtpbin: fix a bug calculating stream offsets.
2010-05-03 11:23:59 +02:00
Sebastian Dröge
ad1c01661f
matroskamux: Write previous cluster's size
...
This is useful for backwards playback, which should be implemented
in matroskademux at some point.
2010-05-01 14:20:59 +02:00
Sebastian Dröge
1e1cf5df70
matroskademux: Set interlaced flag in the caps if the flag is set in the Matroska file
2010-05-01 14:15:49 +02:00
Sebastian Dröge
db6a3e55c6
matroskamux: Write interlaced flag if the input video content is interlaced
...
Unfortunately Matroska has no way to specify TFF and friends...
2010-05-01 14:13:24 +02:00
Tim-Philipp Müller
c1d24699f5
rtp: fix printf format of some debug messages
2010-05-01 11:25:26 +01:00
Tim-Philipp Müller
fa4b2938bc
matroska: init variable to avoid compiler warning on OSX
...
Fixes (bogus) "'offset' may be used uninitialized in this function"
warning on build bot (also spotted by philn).
2010-05-01 11:15:04 +01:00
David Schleef
1df1d34fe1
qtdemux: UYVY is 4:2:2, not 4:2:0
2010-04-30 17:19:44 -07:00
Sebastian Dröge
2ac1f1c7ee
deinterlace: Make automatic detection of interlacing the default
...
Previously "force deinterlacing" was the default, which is a not very
sensible default for the normal use case where deinterlace should act
in passthrough mode unless interlaced content is present.
2010-04-30 22:17:12 +02:00
Mark Nauwelaerts
be5ffd96fe
rtptheoradepay: also accept in-band configuration
...
Fixes #574416 (theora).
2010-04-30 13:54:56 +02:00
Mark Nauwelaerts
a344cfba27
rtpvorbisdepay: also accept in-line configuration
...
Fixes #574416 (vorbis).
2010-04-30 13:54:52 +02:00
Olivier Crête
7bc3253761
rtptheoradepay: Ignore packets without a known codebook
...
Don't produce an error if a packet is received without a valid codebook,
it's possible that the codebook will just be coming later.
See #574416 .
2010-04-30 13:54:50 +02:00
Benjamin M. Schwartz
c3dc498278
y4menc: add 4:2:2, 4:1:1, and 4:4:4 output support
...
Fixes #610902 .
2010-04-30 13:50:08 +02:00
Mark Nauwelaerts
6bf7f5cfd3
rtph264depay: DELTA_UNIT marking of output buffers
...
... which evidently makes (most) sense if output buffers are
actually frames.
Partially based on a patch by
Miguel Angel Cabrera <mad_aluche at hotmail.com>
Fixes #609658 .
2010-04-30 13:50:03 +02:00
Mark Nauwelaerts
0206b67b1d
rtph263depay: extra keyframe info from PTYPE header
...
... as opposed to taking it from h263 payload header, which need not
be so reliable.
Fixes #610172 .
2010-04-30 13:50:00 +02:00
Mark Nauwelaerts
fe9e6d82ee
rtph263depay: also use Picture Start Code to detect packet loss
...
This ensures a whole frame is dropped if a (start) packet is lost,
rather than relying only on the DISCONT flag.
2010-04-30 13:49:57 +02:00
Mark Nauwelaerts
84ac277add
rtph263depay: detect frame start using Picture Start Code
...
So we stop dropping fragments as soon as there is a picture start (code).
In particular, this prevents dropping the first frame following
initial DISCONT.
2010-04-30 13:49:54 +02:00
Mark Nauwelaerts
e7903311f5
rtph263depay: handle a few FIXMEs
2010-04-30 13:49:51 +02:00
Mark Nauwelaerts
3692bbb7ae
rtph263depay: slightly refactor payload dropping
2010-04-30 13:49:47 +02:00
Mark Nauwelaerts
a08f76a92e
rtph263pay: use found GOBs to apply Mode A payloading
...
... rather than falling back to sending the whole frame in one packet
if number of GOB startcodes < maximum.
One might take this further and still perform Mode B/C payloading,
but at least this should cater for decent fragments in typical cases.
Fixes #599585 .
2010-04-30 13:49:43 +02:00
Mark Nauwelaerts
a6bb8338fd
matroskademux: implement push mode seeking
2010-04-30 13:49:39 +02:00
Tim-Philipp Müller
e79f7beba6
docs: update for videofilter plugin merge and add gtk-doc blurb for new property
2010-04-29 20:08:43 +01:00
Sebastian Dröge
61217b521c
deinterlace: Improve segment handling a bit
2010-04-29 19:28:24 +02:00
Sebastian Dröge
05a2732851
deinterlace: Order caps by amount of contained information
2010-04-29 19:28:24 +02:00
Sebastian Dröge
cb789617f9
deinterlace: Properly set interlaced field in getcaps
2010-04-29 19:28:24 +02:00
Sebastian Dröge
eeb5a23483
deinterlace: Add planar YUV support to all other simple methods
2010-04-29 19:28:24 +02:00
Sebastian Dröge
4ca4ac3f03
deinterlace: Add planar YUV support to greedyh method
2010-04-29 19:28:24 +02:00
Sebastian Dröge
bdb9675519
deinterlace: Add support for planar YUV formats in greedyl method
2010-04-29 19:28:24 +02:00
Sebastian Dröge
03a8379e20
deinterlace: Add support for Y444, Y42B, I420, YV12 and Y41B
...
The vfir method supports them and will be used until something else
supports it.
2010-04-29 19:28:23 +02:00
Sebastian Dröge
a626b19490
deinterlace: Define deinterlace method base classes as abstract types
2010-04-29 19:28:23 +02:00
Sebastian Dröge
600f82fbfe
deinterlace: Move deinterlacing methods to their own file
2010-04-29 19:28:23 +02:00
Sebastian Dröge
a405d5a4f1
deinterlace: Simplify passthrough mode detection
2010-04-29 19:28:23 +02:00
Sebastian Dröge
3dc7215492
deinterlace: Refactor deinterlacing as preparation for supporting more color formats
2010-04-29 19:28:23 +02:00
Sebastian Dröge
e2eb012a41
videobox: Add support for Y444, Y42B and Y41B
2010-04-29 19:28:23 +02:00
Sebastian Dröge
d20306b699
videobox: Add support for YVYU and reorder template caps
2010-04-29 19:28:23 +02:00
Sebastian Dröge
4e836d3271
videobox: Translate navigation events to make sense again upstream
2010-04-29 19:28:23 +02:00
Sebastian Dröge
a105bf49e3
videobox: Properly handle ranges/lists of width or height when transforming caps
...
Code partly taken from the videocrop element.
2010-04-29 19:28:23 +02:00
Sebastian Dröge
f71157fa06
alpha: Fix planar YUV->RGB processing
2010-04-29 19:28:22 +02:00
Sebastian Dröge
1897ab2928
alpha: Correctly clamp after YUV->RGB conversion
2010-04-29 19:28:22 +02:00
Sebastian Dröge
545b21c9bd
alpha: Add support for YUY2, YVYU and UYVY
2010-04-29 19:28:22 +02:00
Sebastian Dröge
90058bc076
videobox: Sync properties to the controller in before_transform
2010-04-29 19:28:22 +02:00
Sebastian Dröge
9fa14f8c37
videobox: Add support for YUY2 and UYUV
2010-04-29 19:28:22 +02:00
Sebastian Dröge
0294e1e48a
alpha: Refactor processing and add support for other planar YUV formats
...
This reduces the generated code size by a factor of 2.5.
2010-04-29 19:28:22 +02:00
Sebastian Dröge
ba72a058bb
alpha: Add support for YV12 input
2010-04-29 19:28:22 +02:00
Sebastian Dröge
6dd3edd0f7
videomixer: Add support for YUY2, YVYU, UYVY
2010-04-29 19:28:22 +02:00
Sebastian Dröge
bd0b307a74
videomixer: Add support for Y444, Y42B, Y41B and YV12
2010-04-29 19:28:22 +02:00
Sebastian Dröge
314fbd80e8
videofilter: Order color formats by their contained amount of information
2010-04-29 19:28:21 +02:00
Sebastian Dröge
1bc924d8ad
videoflip: Drop Y41B/Y42B support
...
Rotating 90°/270° with subsampled YUV where horizontal
and vertical subsampling are different doesn't really work.
2010-04-29 19:28:21 +02:00
Sebastian Dröge
45571f4bd4
videoflip: Also flip the pixel-aspect-ratio if width/height are exchanged
2010-04-29 19:28:21 +02:00
Sebastian Dröge
c0e990b58f
videoflip: Change the default method to identity
2010-04-29 19:28:21 +02:00
Sebastian Dröge
0515f88f7c
videobalance: Reduce number of allocations per instance
2010-04-29 19:28:21 +02:00
Sebastian Dröge
3ef25c28cd
videofilter: Update last-reviewed comments
2010-04-29 19:28:21 +02:00
Sebastian Dröge
c5805b6e38
videobalance: Add support for all RGB formats
2010-04-29 19:28:21 +02:00
Sebastian Dröge
80676e1777
videobalance: Add support for YUY2, UYVY, AYUV and YVYU
2010-04-29 19:28:21 +02:00
Sebastian Dröge
3d70ce60fa
videobalance: Add debug category
2010-04-29 19:28:20 +02:00
Sebastian Dröge
37de42977a
videobalance: Make property access threadsafe
2010-04-29 19:28:20 +02:00
Sebastian Dröge
5f396b9a71
videobalance: Add support for Y41B, Y42B and Y444
2010-04-29 19:28:20 +02:00
Sebastian Dröge
2cb7ac0192
videobalance: Use libgstvideo for format specific things
2010-04-29 19:28:20 +02:00
Sebastian Dröge
fe4f9ea16b
videobalance: Make properties controllable
2010-04-29 19:28:20 +02:00
Sebastian Dröge
ea06bd33f8
videobalance: Emit "value-changed" signal of color balance interface when values change
2010-04-29 19:28:20 +02:00
Sebastian Dröge
e13cd55fab
videobalance: Some random cleanup
2010-04-29 19:28:20 +02:00
Sebastian Dröge
17ba0818b1
videobalance: Stop using liboil
...
The used liboil function is deprecated and has no optimized
implementation anyway.
2010-04-29 19:28:20 +02:00
Sebastian Dröge
bc2edb9706
videoflip: Make property access threadsafe
2010-04-29 19:28:20 +02:00
Sebastian Dröge
650072abed
gamma: Sync properties to the controller in before_transform
2010-04-29 19:28:19 +02:00
Sebastian Dröge
537effad12
videoflip: Add support for all RGB formats and AYUV
2010-04-29 19:28:19 +02:00
Sebastian Dröge
516b5f7f2e
videoflip: Add support for Y41B, Y42B and Y444
2010-04-29 19:28:19 +02:00
Sebastian Dröge
e8ca390be8
videoflip: Make processing more general and use libgstvideo for all format specific things
2010-04-29 19:28:19 +02:00
Sebastian Dröge
754690dad6
videoflip: Make method property controllable and improve debug output
2010-04-29 19:28:19 +02:00
Sebastian Dröge
8c4aeb2eac
videoflip: Some random cleanup
2010-04-29 19:28:19 +02:00
Sebastian Dröge
1584d16b1c
videofilter: Move all elements into a single plugin
...
Having all these small elements in a separate plugin
is not very memory effective...
2010-04-29 19:28:19 +02:00
Sebastian Dröge
92cedb0510
gamma: Improve docs a bit
2010-04-29 19:28:19 +02:00
Sebastian Dröge
e23d74ca84
gamma: Add support for all RGB formats
2010-04-29 19:28:19 +02:00
Sebastian Dröge
2d1e6cf3f5
gamma: Add support for many packed YUV formats
...
That is YUY2, UYVY, AYUV and YVYU.
2010-04-29 19:28:19 +02:00
Sebastian Dröge
2de3eabac6
gamma: Add support for all other planar YUV formats
...
That is Y41B, Y42B, Y444, NV12 and NV21.
2010-04-29 19:28:19 +02:00
Sebastian Dröge
9f727ea05c
gamma: Stop using liboil
...
The used liboil function is deprecated, only has a reference implementation
and is more complex than what's needed here.
2010-04-29 19:28:19 +02:00
Sebastian Dröge
155e48fb90
gamma: Use libgstvideo for format specific values and make gamma processing more generic
...
Allows us to easily add support for new color formats later.
2010-04-29 19:28:18 +02:00
Sebastian Dröge
18273152b3
gamma: Make gamma property controllable
...
...and properly use liboil.
2010-04-29 19:28:18 +02:00
Sebastian Dröge
2a3f99ca5f
gamma: Some random cleanup
2010-04-29 19:28:18 +02:00
Sebastian Dröge
ecb0c3a932
smptealpha: Sync properties to the controller in before_transform
2010-04-29 19:28:18 +02:00
Sebastian Dröge
f005c87037
smptealpha: Add support for YV12 (converted to AYUV)
2010-04-29 19:28:18 +02:00
Sebastian Dröge
ae1783e5cd
smptealpha: Add support for all 4 ARGB formats
...
...without format conversion.
2010-04-29 19:28:18 +02:00
Sebastian Dröge
055c90359a
smptealpha: Make color format support more generic
...
This allows easier addition of new formats later.
2010-04-29 19:28:18 +02:00
Sebastian Dröge
56d4230b22
smptealpha: Some random cleanup
2010-04-29 19:28:18 +02:00
Sebastian Dröge
04a1b1dc48
smpte: Add property for inverting the transition mask
...
This converts a left-to-right transition to right-to-left or
clock-wise to counter-clock-wise.
2010-04-29 19:28:17 +02:00
Sebastian Dröge
e17954aa6b
smptealpha: Correctly detect property changes and update properties
2010-04-29 19:28:17 +02:00
Wim Taymans
754007b344
qcelpdepay: add first version of a QCELP depayloader
2010-04-29 18:07:10 +02:00
Tim-Philipp Müller
f48bc702af
flvmux: hide is-live property for release
...
At the very least it needs a better/less wrong name.
See #613066 .
2010-04-26 00:01:19 +01:00
Sebastian Dröge
5a530b19e8
videomixer: Fix byte order for MMX ARGB/AYUV color filling
...
Fixes bug #616409 .
2010-04-22 13:30:55 +02:00
Sebastian Dröge
a27856e6b8
videomixer: Fix AYUV checker/color filling
2010-04-21 17:53:49 +02:00
Sebastian Dröge
3f88dce350
videomixer: Add i387 floating point registers to the clobbered registers list
...
They are the same as the mm0-mm7 MMX registers and will be overwritten
by the assembly code if gcc doesn't know about the MMX registers.
Note: They're all added to the list of clobbered registers in all cases
and not only when __MMX__ is not defined just to make sure that no other
bugs happen with this code just because some compiler version gets things
wrong.
Fixes bug #614466 .
2010-04-19 16:57:19 +02:00
Sebastian Dröge
a904edfaf5
videobox: Use libgstvideo to get the order of RGB
2010-04-19 14:43:41 +02:00
Brian Cameron
f3c032e6ac
goom: add edx to clobber list in inline assembly code
...
mull modifies %edx, so should be mentioned in clobber list.
Fixes crash on Solaris (#615998 ).
2010-04-17 10:26:25 +01:00
Sebastian Dröge
386169b9fe
videobox: Fix I420->I420 copying
...
Fixes bug #615143 .
2010-04-16 15:27:56 +02:00
Sebastian Dröge
e6dd1fc3db
videobox: Fix AYUV->I420 copying
2010-04-16 15:27:56 +02:00
Mark Nauwelaerts
e053a89c21
rtph264depay: profile-level-id is an optional parameter
...
So, if needed, extract the corresponding info from
sprop-parameter-sets.
Based on patch provided by <dxssx at gmail.com>
Fixes #612657 .
2010-04-16 12:14:26 +02:00
Edward Hervey
146e50455b
videobox: transform_caps : We can only convert AYUV to xRGB
...
We were previously stating that we could convert AYUV/I420/YV12 to xRGB.
2010-04-14 18:27:52 +02:00
Tim-Philipp Müller
a155deaabf
matroskademux, qtdemux: minor code cleanup in avc_level_idc_to_string()
...
Do the same with slightly fewer LOC.
2010-04-12 15:10:11 +01:00
Sebastian Dröge
37e3d2d9d5
videobox: Fix I420->AYUV copying
2010-04-12 11:43:49 +02:00
Sebastian Dröge
9da4f2906f
videobox: Correctly clamp frame/background alphas to [0,255] before writing them
2010-04-12 11:27:40 +02:00
David Schleef
289f69eb84
deinterlace: Only check interlaced flag in sink caps
...
Fixes #615460 .
2010-04-11 13:15:32 -07:00
Stefan Kost
d6e9af2a11
docs: do proper escaping for "%"
2010-04-08 18:05:46 +03:00
Stefan Kost
0e048803b9
rtsp: remove obsolete google extension
...
This was not build for a while and can be removed.
2010-04-08 17:50:49 +03:00
Stefan Kost
6772badb88
docs: enable the 2 of 65 rtp elements in the docs
2010-04-08 17:19:41 +03:00
Stefan Kost
ddfb2827d1
docs: upd -> udp and voila it shows up in the docs
2010-04-08 16:56:37 +03:00
Stefan Kost
04d9490ca9
docs: fix doc blob syntax
2010-04-08 16:51:27 +03:00
Stefan Kost
054b84359b
flvdemux: make debug category static
2010-04-08 14:34:59 +03:00
Stefan Kost
fa09b5d519
flxdemux: rename GstFLVDemux for GstFlvDemux
2010-04-08 14:29:59 +03:00
Stefan Kost
fcc3db73a3
flvdemux: merge flvparse into the demuxer and make function static
...
No need to hide certain function in the docs. Allows to do more cleanups.
2010-04-08 14:29:59 +03:00
Sebastian Dröge
afed9b959c
alpha: Add documentation
2010-04-08 13:14:23 +02:00
Stefan Kost
9967a4112b
rtpsession: remove prototype for non existing function
...
There is no function by that name anywhere.
2010-04-08 14:02:50 +03:00
Sebastian Dröge
4d906b4a0a
alphacolor: Improve docs a bit
2010-04-08 12:56:30 +02:00
Stefan Kost
acc742bbc9
matroska-mux: fix last commit
...
Use a local define for WAVEFORMAT_EX based on the size of the struct + 2 bytes
for the extension size.
2010-04-08 13:29:35 +03:00
Stefan Kost
7e3ccacc2f
wavenc: remove internal copy of riff.h and use riff-library instead.
...
We don't use any function yet, just the structures and defines.
2010-04-08 13:03:43 +03:00
Stefan Kost
0c35e0c4db
matroskamux: use riff lib more
...
Remove BITMAPINFOHEADER and use the one from riff-lib. Also remove the
WAVEFORMATEX_SIZE define and use a sizeof together with the respective struct.
Besides better code reuse this lessens the ununsed symbols in the docs.
2010-04-08 12:57:03 +03:00
Stefan Kost
e7a5ff40bd
docs: trim sections file more
...
Rename some defines and move some itesm to *.c files. Add more items to internal
subsection.
2010-04-08 12:14:07 +03:00
Stefan Kost
43ebe8235f
docs: fix xml
...
The title tag belongs into the refsect2.
2010-04-08 10:30:06 +03:00
Sebastian Dröge
4e277ebe7b
videobox: Add support for YV12, including conversion support for I420/AYUV
2010-04-07 17:43:56 +02:00
Sebastian Dröge
b4e3532c1f
videobox: Add support for grayscale input/output
...
This doesn't do any conversion and is the next step to
replacing videocrop by supporting all remaining formats
in passthrough mode.
2010-04-07 17:27:12 +02:00
Sebastian Dröge
02a4a150e8
videobox: Add support for filling the background with red, yellow and white
2010-04-07 16:24:38 +02:00
Sebastian Dröge
a0fd92dfc1
videobox: Add support for direct RGB<->AYUV conversion
2010-04-07 16:12:51 +02:00
Sebastian Dröge
84ce6f2a2b
videobox: Fix RGB24 filling
2010-04-07 16:12:51 +02:00
Marco Ballesio
2ff1558a87
h264depay: handle properly STAPs
...
in rtph264depay.c, lines 577-576, NALU-type 24 (Single-Time Aggregation
Packet) is handled in fall-through as NALU-type 26 (unhandled).
This leads high quality h264 streams such as:
rtsp://stream.yle.mobi/yle/areena/MEDIA_E0342657_p3.mp4
to fail with "NAL unit type 24 not supported yet" (but it's actually
supported), and thus to close any stream which contains STAPs.
The proposed one-liner patch fixes the issue.
Fixes #615051 .
2010-04-07 16:17:06 +03:00
Thijs Vermeir
d17ad171c9
build: fix compiler warnings
...
fix warnings for all plugins that use: setlocale (LC_ALL...
2010-04-07 13:48:12 +02:00
Thijs Vermeir
1e5bb1c300
avi: fix compiler warning
2010-04-07 13:32:09 +02:00
Mark Nauwelaerts
dc09ace2bd
matroskademux: restrict resyncing to subtitle tracks
...
This should prevent skipping audio or video in not so well interleaved
cases.
Fixes #614460 .
2010-04-07 12:40:13 +02:00
Arun Raghavan
861311e8f6
qtdemux: Post avg./max. bitrate tags for H.264
...
This reads the average and maximum bitrates from the 'btrt' atom if
available, and pushes these as tags,
https://bugzilla.gnome.org/show_bug.cgi?id=614927
2010-04-07 11:55:32 +02:00
Sebastian Dröge
3c1940c187
videobox: Fix conversion from 3 byte RGB to ARGB
2010-04-05 17:31:36 +02:00
Sebastian Dröge
687ff84592
videobox: Add support for 3 byte RGB formats and refactor RGB code a bit
2010-04-05 17:08:15 +02:00
Sebastian Dröge
d0ad28ad54
videobox: Add support for all 32 bit RGB formats
...
...including conversion between them.
2010-04-05 15:52:11 +02:00
Wim Taymans
b84bf10455
rtspsrc: add property to control the buffering method
...
Add a property to control how the jitterbuffer performs timestamping and
buffering.
2010-04-05 15:26:03 +02:00
André Dieb Martins
5a395846c6
alphacolor: Removing unused variable
...
Fixes bug #614843 .
2010-04-05 10:31:45 +02:00
Thiago Santos
f966ff66f8
qtdemux: Read replaygain peak/gain tags
...
Make qtdemux read tags replaygain tags that are within '----' atoms.
Fixes #614471
2010-04-02 15:23:51 -03:00
Arun Raghavan
95c6d558f0
matroska: Export h.264 profile and level in caps
...
This replicates the code in qtdemux to export the h.264 profile and
level in the stream caps.
https://bugzilla.gnome.org/show_bug.cgi?id=614651
2010-04-02 18:51:34 +02:00
Sebastian Dröge
9317ad6fe9
qtdemux: Fix off-by-one introduced in last commit
2010-04-02 18:50:45 +02:00
Arun Raghavan
ccef64be39
qtdemux: Minor refactor of the code
...
This will make it easier to clump together common code when copying to
mastroskademux.
https://bugzilla.gnome.org/show_bug.cgi?id=614651
2010-04-02 18:49:20 +02:00
Arun Raghavan
d6dcd70b4c
qtdemux: Export h.264 level in caps
...
This exports the h.264 level in the stream caps (as a string) which can
be used to match a decoder, or as metadata.
https://bugzilla.gnome.org/show_bug.cgi?id=614651
2010-04-02 18:48:45 +02:00
Arun Raghavan
503f0988bf
qtdemux: Export h.264 profile in caps
...
This adds the h.264 profile for a given stream into caps. This can
(eventually) be used to select an appropriate decoder and as metadata
for certain applications.
https://bugzilla.gnome.org/show_bug.cgi?id=614651
2010-04-02 18:48:23 +02:00
Mark Nauwelaerts
2d6d2a4d95
flvdemux: remove obsolete reverse playback code path
2010-04-01 10:46:16 +02:00
Mark Nauwelaerts
1c7b1d110b
flvdemux: support (pull mode) negative seek rate
2010-04-01 10:46:12 +02:00
Mark Nauwelaerts
d3ae0ef71f
flvdemux: also check for segment stop for non-segment-seek
2010-04-01 10:46:10 +02:00
Mark Nauwelaerts
b9f569bfd0
matroskademux: push correctly sized flac header buffers
...
Fixes #614353 .
2010-03-30 16:51:36 +02:00
Tim-Philipp Müller
9e1f5031cc
id3demux: fix parsing of unsynced frames with data length indicator
...
Fixes bug #614158 .
2010-03-30 01:54:40 +01:00
Tim-Philipp Müller
d756bab488
build: build plugins and examples in parallel where possible
2010-03-29 11:00:57 +01:00
Tim-Philipp Müller
af5e4d935a
qtdemux: extract stream language in more cases
...
The 16-bit language code can be either a packed ISO-639-2T code
or a 'Macintosh language code'. Handle the latter type of language
codes as well, and map to the matching ISO code. Lastly, fix
language code posting for language #0 , which is valid and stands
for 'English'.
Fixes #614001 .
2010-03-26 17:02:50 +00:00
Sebastian Dröge
2873c3ad6b
videobox: Fix AYUV->I420 frame copying
2010-03-26 13:45:46 +01:00
Sebastian Dröge
3bdd50c93b
videobox: Always fill the complete frame if borders should be added
...
This makes sure that we don't get any gaps between rectangles because
of chroma subsampling for example.
2010-03-26 13:28:53 +01:00
Sebastian Dröge
298f1c3202
videobox: Refactor boxing to reduce code duplication
2010-03-26 13:28:53 +01:00
Sebastian Dröge
2e043908de
alpha: Simplify caps transformation
2010-03-26 13:28:53 +01:00
Sebastian Dröge
cd6b4214a6
videobox: Add const qualifier to the source frame data
2010-03-26 13:28:53 +01:00
Mark Nauwelaerts
b1f3e4d0cf
matroskademux: only seek when in proper state
...
... and data structures can be thread-safely accessed.
See #601617 .
2010-03-26 11:45:47 +01:00
Mark Nauwelaerts
9157c262ba
matroskademux: support (pull mode) negative seek rate
2010-03-26 11:45:41 +01:00
Mark Nauwelaerts
95e38e59a2
matroskademux: track clip duration in segment
2010-03-26 11:45:39 +01:00
Mark Nauwelaerts
6ccffcf5f1
matroskademux: prefer index of video track to perform seeking
2010-03-26 11:45:36 +01:00
Mark Nauwelaerts
d654eeb6de
avidemux: fix typo in header validation check
2010-03-25 11:40:20 +01:00
Edward Hervey
66d9dbe49e
icydemux: Handle upstream Content-Type.
...
Allows us to handle ShoutCast TV (NSV) streams.
If the upstream caps have the 'content-type' field set to video/nsv, then
we shortcut the typefinding and set video/x-nsv directly.
2010-03-23 19:48:24 +01:00
Stefan Kost
f1a75adcbc
i18n: build fixes: #if -> #ifdef for ENABLE_NLS
2010-03-22 17:26:37 +02:00
Benjamin Otte
382afe983b
multifile: Include headers instead fo defining functions
2010-03-21 17:36:28 +01:00
Benjamin Otte
c2846f698b
Make goom not use aggregate returns
2010-03-21 17:23:43 +01:00
Benjamin Otte
412cc10314
Add -Wold-style-definition flag
...
And fix the warnings
2010-03-21 15:17:46 +01:00
Benjamin Otte
3f511ec361
Add -Wwrite-strings to the configure flags
...
... and fix all warnings
2010-03-21 14:17:47 +01:00
Sebastian Dröge
0f7631f8ec
shapewipe: Add support for the remaining ARGB formats
...
And handle AYUV like ARGB, we need no YUV specific handling.
2010-03-21 11:14:12 +01:00