Original commit message from CVS:
patch by: Alessandro Decina
* gst/mpegtsparse/mpegtsparse.c:
Fix memory leak by unreffing structures when not needed.
Fixes#539292.
Original commit message from CVS:
patch by: Sebastian Pölsterl
* gst/mpegtsparse/mpegtspacketizer.c:
Handle character sets in strings coming from DVB SI according
to the DVB SI spec.
Original commit message from CVS:
* gst/mpegtsparse/mpegtspacketizer.c:
* gst/mpegtsparse/mpegtsparse.c:
Make sure all schedule EIT and non-actual transport stream
EITs are parsed. Also add present-following flag and
actual-transport-stream flag to eit bus message.
Original commit message from CVS:
* gst/mpegtsparse/mpegtspacketizer.c:
* gst/mpegtsparse/mpegtspacketizer.h:
* gst/mpegtsparse/mpegtsparse.c:
Detect SI pids (NIT, SDT, EIT etc.) based on table id and not
by pid number. This allows for example the EPG data from UK's
freesat to be picked up.
Original commit message from CVS:
* gst/mpegtsparse/mpegtspacketizer.c:
Cable delivery subsystem descriptors' frequency's bcd
is measured in 100Hz units so adjust multiplier accordingly.
Original commit message from CVS:
* gst/mpegtsparse/gstmpegdesc.h:
* gst/mpegtsparse/mpegtspacketizer.c:
Add parsing of cable delivery system descriptor.
Original commit message from CVS:
* gst/mpegtsparse/mpegtsparse.c:
Only send PMTs to program pads that the PMT is for even if
on same pid.
As a by-product, we now no longer hardcode any psi pid numbers.
Also remove pcr stream from old pmt when we apply a new pmt.
Original commit message from CVS:
* gst/mpegtsparse/gstmpegdesc.c:
* gst/mpegtsparse/gstmpegdesc.h:
* gst/mpegtsparse/mpegtsparse.c:
Make sure the gstmpegdesc debug lines do not critical
when GST_DEBUG is enabled and also actually output.
Thanks to Alessandro Decina for spotting.
Fixes#516448
Original commit message from CVS:
* gst/mpegtsparse/mpegtspacketizer.c:
Parse component descriptor.
* gst/mpegtsparse/mpegtsparse.c:
Add SI pids to every program (but hardcoded currently).
Original commit message from CVS:
* gst/mpegtsparse/mpegtspacketizer.c:
Add flag to both sdt and nit structures to say
whether the table is for the actual network/ts
or not.
Original commit message from CVS:
* gst/mpegtsparse/gstmpegdesc.h:
* gst/mpegtsparse/mpegtspacketizer.c:
Fix network name descriptor, the length is actually the
descriptor length not stored in the byte after.
Fix bounds checking to be more correct.
Original commit message from CVS:
* gst/mpegtsparse/gstmpegdesc.h:
* gst/mpegtsparse/mpegtspacketizer.c:
Parse and add to relevant bus messages the terrestrial delivery
system descriptor and the logical channel descriptor.
Do bounds checking on data stored in descriptor before use.
Original commit message from CVS:
* gst/mpegtsparse/gstmpegdesc.h:
* gst/mpegtsparse/mpegtspacketizer.c:
Parsed the satellite delivery system descriptor and
added into nit's transport structure for delivery
over the bus.
Original commit message from CVS:
* gst/mpegtsparse/mpegtspacketizer.c:
Remove leaks introduced by not freeing g_strndup'd strings.
Fix start_time and duration parsing in EIT.
Original commit message from CVS:
* gst/mpegtsparse/Makefile.am:
* gst/mpegtsparse/gstmpegdesc.c:
* gst/mpegtsparse/gstmpegdesc.h:
* gst/mpegtsparse/mpegtspacketizer.c:
* gst/mpegtsparse/mpegtsparse.c:
Added descriptor searching infrastructure from Fluendo TS demuxer.
Add channel name and provider to the sdt structure sent in the
bus message.
Original commit message from CVS:
* gst/mpegtsparse/mpegtspacketizer.c:
* gst/mpegtsparse/mpegtspacketizer.h:
Hash streams by pid again. Add a linked list inside each
stream with a list of sub_tables. Fix multiple sections
as it was borked with my last commit.
Original commit message from CVS:
* gst/mpegtsparse/mpegtspacketizer.c:
* gst/mpegtsparse/mpegtsparse.c:
A sub table is identified by the pair table_id and
sub_table_identifier, not by pid. So hash with that.
* sys/dvb/dvbbasebin.c:
Make sure initial pids are added properly to filter,
Original commit message from CVS:
* gst/mpegtsparse/Makefile.am:
* gst/mpegtsparse/mpegtspacketizer.c:
* gst/mpegtsparse/mpegtsparse.c:
Remove signals for pat, pmt, nit, eit, sdt. Replace with bus
messages.
* sys/dvb/dvbbasebin.c:
Instead of attaching to signals, use the bus messages.
Also fix up so the dvbsrc starts only outputting the info tables
like PAT, CAT, NIT, SDT, EIT instead of the whole ts.
Original commit message from CVS:
patch by: Alessandro Decina
* gst/mpegtsparse/mpegtspacketizer.c:
* gst/mpegtsparse/mpegtspacketizer.h:
* gst/mpegtsparse/mpegtsparse.c:
* gst/mpegtsparse/mpegtsparse.h:
pat-info is now a signal not a GObject property that
gets notified.
pat-info, pmt-info now instead of passing a GObject as
a parameter, pass a GstStructure.
New signals: nit-info, sdt-info, eit-info for DVB SI information
* sys/dvb/camconditionalaccess.c:
* sys/dvb/camconditionalaccess.h:
* sys/dvb/camdevice.c:
* sys/dvb/camdevice.h:
* sys/dvb/camswclient.c:
* sys/dvb/camswclient.h:
* sys/dvb/camutils.c:
* sys/dvb/camutils.h:
Cam code now uses the pmt GstStructure passed from mpegtsparse
signals rather than the GObject.
* sys/dvb/dvbbasebin.c:
Use new signals in mpegtsparse and use GstStructures as per
mpegtsparse's modified API.
Original commit message from CVS:
Patch by: Wai-Ming Ho <webregbox at yahoo dot co dot uk>
* gst/mpegtsparse/mpegtspacketizer.c: (foreach_stream_clear),
(remove_all), (mpegts_packetizer_clear):
Ensure that the plugin does not crash when the property pat-info is
queried before a PAT is available. It also ensures that the PAT info is
cleared when the changing from PLAYING to READY.
Fixes#487892.
Original commit message from CVS:
patch by: Alessandro Decina
* gst/mpegtsparse/mpegtspacketizer.c:
* gst/mpegtsparse/mpegtsparse.c:
* gst/mpegtsparse/mpegtsparse.h:
Add request pad for getting the full transport stream coming in.
Original commit message from CVS:
Patch by: Wai-Ming Ho <webregbox at yahoo dot co dot uk>
* gst/mpegtsparse/mpegtspacketizer.c:
(mpegts_packetizer_stream_new):
Don't skip PAT with version number 0. Fixes#483400.
* gst/mpegtsparse/mpegtsparse.c: (mpegts_parse_apply_pat):
Make all values above 0 mark a referenced program as they can be
incremented and only 1 had marked a referenced program before, causing
actually referenced programs to be unreferenced.
Original commit message from CVS:
Patch by: mutex at runbox dot com
* gst/mpegtsparse/mpegtspacketizer.c:
(mpegts_packetizer_parse_adaptation_field_control):
* gst/mpegtsparse/mpegtsparse.c: (mpegts_parse_base_init),
(mpegts_parse_init), (mpegts_parse_push):
* gst/mpegtsparse/mpegtsparse.h:
Remove useless src pad that only results in not linked errors,
fix a broken pointer dereference and make MAX_CONTINUITY constant
conform to the standard to stop outputting corrupted data.
Fixes#481276, #481279.
Original commit message from CVS:
* gst/mpegtsparse/flutspatinfo.c:
* gst/mpegtsparse/flutspatinfo.h:
* gst/mpegtsparse/flutspmtinfo.c:
* gst/mpegtsparse/flutspmtinfo.h:
Update licences to reflect LGPL-ness of these files also.
Original commit message from CVS:
* configure.ac:
* gst/mpegtsparse/Makefile.am:
* gst/mpegtsparse/flutspatinfo.c:
* gst/mpegtsparse/flutspatinfo.h:
* gst/mpegtsparse/flutspmtinfo.c:
* gst/mpegtsparse/flutspmtinfo.h:
* gst/mpegtsparse/flutspmtstreaminfo.c:
* gst/mpegtsparse/flutspmtstreaminfo.h:
* gst/mpegtsparse/mpegtspacketizer.c:
* gst/mpegtsparse/mpegtspacketizer.h:
* gst/mpegtsparse/mpegtsparse.c:
* gst/mpegtsparse/mpegtsparse.h:
* gst/mpegtsparse/mpegtsparsemarshal.list:
Add mpeg transport stream parser written by:
Alessandro Decina. Includes a couple of files from the
Fluendo transport stream demuxer that Fluendo have
kindly allowed to be licenced under LGPL also.
