The element now exposes properties to enable and configure
voice activity detection, and posts "voice-activity" messages
when the return value of stream_has_voice () changes.
https://bugzilla.gnome.org/show_bug.cgi?id=779138
A live manifest may have a set (> LookAheadFragmentCount) of fragments
that have already been served and are stored on the server, maybe
indefinitely. Adding the parsed live fragments after the manifest
fragments breaks duration reporting and the seekable range.
Fix by only adding parsed fragments outside the list of fragments which
assumes that the fragment list in the manifest is accurate enough to not
stray too far off what's in the retrieved data.
https://bugzilla.gnome.org/show_bug.cgi?id=779447
Instead of just going to the first or last fragment, report if we're
going outside the index. This should never happen unless there's a bug
or the stream is broken.
Allow some possibility for inaccuracies here though.
There is no guarantee that the index positions are the same between
representations, and assuming this easily causes us to get into invalid
index positions.
If a MPD is On-Demand profile and no index described, demux will terminate
download loop after parsing inband SIDX with flow return custom-success.
At this moment, SIDX index is excat target position, but finish_fragment()
might cause re-advancing subfragment depending on MPD structure.
https://bugzilla.gnome.org/show_bug.cgi?id=776200
SIDX's base offset (i.e., byte offset of SIDX + sidx.first_offset)
mostly vary as per fragment. Also, target SIDX index must be zero for the
new fragment.
https://bugzilla.gnome.org/show_bug.cgi?id=776200
Try to find fragment using MPD first, then do refinement to find
target subframgnet using SIDX if possible. Note that, if target fragment
was moved from the previously activated one, we should assume that
the last SIDX is invalid for new fragment.
https://bugzilla.gnome.org/show_bug.cgi?id=776200
SIDX based playback is not restricted to SegmentBase, but it possible
with SegmentList/SegmentTemplate. In the latter case, each fragment
has its own SIDX box and might be subdivided into subfragment.
So, demux should not assume that the end of subfragment is the end
of stream. Moreover, should try advance subfragment only if there
are remaining subfragments.
With additional fixes by Sebastian Dröge <sebastian@centricular.com>
https://bugzilla.gnome.org/show_bug.cgi?id=776200
All code interacting with Objective-C objects should now use Automated
Reference Counting rather than manual memory management or Garbage
Collection. Because ARC prohibits C-structs from containing
references to Objective-C objects, all such fields are now typed
'gpointer'. Setting and gettings Objective-C fields on such a
struct now uses explicit __bridge_* calls to tell ARC about
object lifetimes.
https://bugzilla.gnome.org/show_bug.cgi?id=777847
hlsdemux tries to find type if given buffer size is large enought to
find type (currently the threshold is 2KB), or EOS in some cases.
However, since there can be small byte fragments such as WebVTT,
demux should try to find type at the end of a fragment
https://bugzilla.gnome.org/show_bug.cgi?id=779011
This appears to be the internal limit of voaacenc, higher
bitrates will be ignored and 128 kbps output will be produced
instead. Therefore, we might just as well limit the allowed
property values, so that people who try to set higher bitrates
get a big fat warning instead of silently a much lower bitrate.
The PCR_flag and PCR value is in adaptation_field, not in payload.
The MSB of adaptation_field_control is used as whether adaptation_
field is exist or not.
For the case(PCR in only adaptation_field without payload), we modify
checking condition about adaptation_field_control field.
https://bugzilla.gnome.org/show_bug.cgi?id=778731
When MPD@suggestedPresentationDelay is not present in the MPD,
dashdemux can provide default suggestedPresentationDelay. However
when applying default value of suggestedPresentationDelay, the value
should be subtracted from current time, not added to it. When streams
setup is performed and live point is calculated, we have to go to the
wall clock (current time) minus suggestedPresentationDelay, if we tried
to start with current time plus suggestedPresentationDelay, we would
be asking for future stream, which has not yet been recorded. Also
the value needs to be converted from ms to us.
https://bugzilla.gnome.org/show_bug.cgi?id=764726
For duration queries on live streams, adaptivedemux ignores the query.
The problem then is that the query is answered by the downstream
qtdemux element, with the duration of the currently passing fragment.
This commit changes the behaviour of adaptivedemux to answer the duration
queries for live streams, returning GST_CLOCK_TIME_NONE.
https://bugzilla.gnome.org/show_bug.cgi?id=753879
The same symbol also exists in libgstgl, although marked as private and
internal. This has no effect when doing static linking and there's a
symbol conflict.
When the sink receives a buffer that is neither a wl_shm one nor a
dmabuf one, this buffer is copied to an internal wl_shm buffer before
being sent to the display.
In that case, the actual size of the received buffer (which may differ
from the one negotiated in the caps) must be used.
https://bugzilla.gnome.org/show_bug.cgi?id=777841
Unless the video format has an alpha component (ARGB, ...), set the
video_surface opaque.
In the usual case where the black area_surface has the same size as the
video_surface (eg: run gst-play-1.0 video.mp4), this makes the black
surface totally occluded which makes weston compositor's life easier
since it can ignore that surface.
Also unconditionally set the black area_surface opaque.
https://bugzilla.gnome.org/show_bug.cgi?id=778078
Otherwise the destructor will never be called, and we would have to call
the constructors manually at some point... which we never did, so
calling release() on it before it got otherwise initialized caused a
crash. For example when running gst-inspect-1.0.
Vulkan handles are either pointers (64-bit) or 64-bit integer
handles (32-bit). Cast the type in failure cases.
vkwindow.c:229:561: error: return makes integer from pointer without a cast [-Werror=int-conversion]
vkwindow.c:231:194: error: return makes integer from pointer without a cast [-Werror=int-conversion]
https://bugzilla.gnome.org/show_bug.cgi?id=777979
hls live starts playback from the allowed latest fragment,
but its "sequence position" is set to zero, and so stream
time is also set to zero.
This does not make sense, because hls live allows seeking to past position,
and it's negative stream time from downstream element's point of view.
Note that, allowed seekable range (and seeking query) is
from the first fragment of playlist to the allowed latest fragment.
https://bugzilla.gnome.org/show_bug.cgi?id=777682
HLS spec 6.3.3 is saying that
"the client SHOULD NOT choose a segment which starts less than
three target durations from the end of the Playlist file."
To ensure above statement, the third fragment from the end of playlist
should be excluded from seekable range and also from available starting fragment.
(i.e., the fourth fragment from end of playlist is the starting fragment).
https://bugzilla.gnome.org/show_bug.cgi?id=777682
During live playback, the first fragment in a updated
playlist can be advanced from that of startup playlist.
Meanwhile, since hlsdemux finds target seek position
by just accumulating fragment's duration, the base should
be adjusted to the updated first fragment's timestamp.
https://bugzilla.gnome.org/show_bug.cgi?id=777682
vkimagememory.c:64:14: warning: implicit conversion from enumeration type 'GstVideoGLTextureType' to different enumeration type 'VkFormat' (aka 'enum VkFormat') [-Wenum-conversion]
return GST_VIDEO_GL_TEXTURE_TYPE_RGB16;
https://bugzilla.gnome.org/show_bug.cgi?id=777760
gstmpeg2enc.cc:224:5: warning: variable 'n' is incremented both in the loop header and in the loop body [-Wfor-loop-analysis]
n++;
^
gstmpeg2enc.cc:221:29: note: incremented here
for (n = 0; fpss[n] != 0; n++) {
^
Without failing, we would play back random parts of the stream which is
arguably a worse user experience, and failing is also recommended by the
spec here.
And also handle live streams without any media sequence numbers at all
properly, that is, make sure the sequence numbers are increasing instead
of starting again at 0 every time.
https://bugzilla.gnome.org/show_bug.cgi?id=775665
Parsing SIDX box was allowed even if "indexRange" attribute does not appear
for On-Demand profile. However, actual seeking using SIDX index did not happen
since download loop keep working on.
To use SIDX index in that case, demux should try it in the next download loop.
https://bugzilla.gnome.org/show_bug.cgi?id=777394
gst_caps_intersect () may return an increased reference of one of the
input caps.
Fixes critical in the simple-launch-lines test:
Unexpected critical/warning: gst_caps_set_features: assertion 'IS_WRITABLE (caps)' failed
Reset redraw_pending at display disconnection, so we can re-connect
later from a clean state (avoid endless buffer drops).
Add a log to inform of dropped buffers.
https://bugzilla.gnome.org/show_bug.cgi?id=775791
sidx has "first_offset" syntax which represents the distance in bytes
from anchor point to media fragment. If present, we should adjust
sidx_base_offset.
https://bugzilla.gnome.org/show_bug.cgi?id=776431
