Thijs Vermeir
f38e37470a
rtpbin: set use-pipeline-clock on correct GObject
2010-09-13 14:39:51 +02:00
Olivier Crête
94e87ef8ee
rtpsession: Initialise the average scaled by 16
2010-09-13 13:10:19 +02:00
Wim Taymans
e6db74764b
rtpsession: add running_time argument docs
2010-09-13 12:41:56 +02:00
Olivier Crête
00fd89c074
rtpstats: Rectify description of current_time in RTPArrivalStats
...
It is the current time, it is unrelated to when the packet was actually received.
2010-09-13 12:37:01 +02:00
Wim Taymans
cb6de429a0
rtpsession: compute the average correctly scaled
2010-09-13 12:31:40 +02:00
Olivier Crête
64e4ffa25b
rtpsession: Count sent RTCP packets after they have been finished
...
If they are counted before calling gst_rtcp_buffer_end(), then the
size is way too big.
2010-09-13 12:13:23 +02:00
Olivier Crête
306ee454c6
gstrtpsession: Don't unref pads in finalize
...
The gstrtpsession object is not holding any reference to them directly
2010-09-13 12:10:11 +02:00
Wim Taymans
8f2d254e24
rtspsrc: don't clear sdp when set as uri
...
when we set the SDP with an uri, don't clear it when we go to READY.
2010-09-10 18:06:48 +02:00
Wim Taymans
7698d8bc4a
rtspsrc: use sdp uri parse method
...
Use the sdp parse method that does proper uri escaping.
2010-09-10 18:02:04 +02:00
Mark Nauwelaerts
d8a27ebe3e
rtpmparobustdepay: fix some mis-implementation
...
Also add some debug.
2010-09-10 13:26:43 +02:00
Mark Nauwelaerts
81773f9cce
rtpmparobustdepay: properly insert dummy buffers
2010-09-10 13:26:31 +02:00
Wim Taymans
ae84ae1b36
rtspsrc: add rtsp-sdp protocol support
...
Allow setting an SDP with the rtsp-sdp:// url.
Based on patch from Marco Ballesio.
See #628214
2010-09-10 12:14:21 +02:00
Alessandro Decina
51c9ad0233
alphacolor: make passthrough work.
2010-09-10 11:35:58 +02:00
Stefan Kost
d569cd8195
mp4adepay: small logging cleanup and addition to debug config parsing
2010-09-09 21:49:43 +03:00
Wim Taymans
de4a7fc4c4
rtpjpegpay: improve debugging
2010-09-09 18:48:53 +02:00
Mark Nauwelaerts
075afb6693
rtpmparobustdepay: use valid bitrate for dummy frame
2010-09-09 16:33:29 +02:00
Mark Nauwelaerts
91a60245b7
matroskademux: QoS handling logic only applies to forward playback
...
Fixes #628894 .
2010-09-08 17:51:34 +02:00
Sebastian Dröge
640cb863d4
rtpjpegpay: Fix uninitialized variable compiler warning
...
Fixes bug #629018 .
2010-09-08 07:13:42 +02:00
Wim Taymans
bd43ac854a
qtdemux: use older g_array_free
...
g_array_unref() is only since 2.22
2010-09-07 17:06:02 +02:00
Wim Taymans
2ed53fd77f
rtpjpegpay: do some more sanitity checks
...
Protect some more against invalid input.
2010-09-07 16:40:08 +02:00
American Dynamics
a482677a14
jpegpay: handle corrupted jpeg better
...
Protect against corrupted jpeg input.
2010-09-07 15:20:12 +02:00
Wim Taymans
474c013051
rvawdepay: cleanup unused fields
2010-09-07 13:56:54 +02:00
Wim Taymans
6be0c7b762
vrawdepay: handle invalid payload better
...
Make sure we don't read more data than available in the input buffer.
Clip the input data into the output buffer.
2010-09-07 13:56:53 +02:00
Stefan Kost
988f228da7
rtpmp4adepay: grab the sampling arte and put into caps
...
This is needed to be able to mux the received audio into mp4 (in the case of
aac). Fixes #625825 .
2010-09-06 21:54:25 +03:00
Tim-Philipp Müller
22560c473d
rtp: mark constant tables as const
2010-09-06 14:40:02 +01:00
Mark Nauwelaerts
2953801a5f
rtpamrpay: properly support perfect-rtptime
2010-09-06 14:47:05 +02:00
Mark Nauwelaerts
275e352a2e
rtpamrpay: proper duration for multiple frame payload
2010-09-06 14:47:02 +02:00
Mark Nauwelaerts
f5bbc56745
rtpamr(de)pay: support AMR-WB SID frame
2010-09-06 14:46:59 +02:00
Mark Nauwelaerts
d1974e386a
rtpg729pay: properly support perfect-rtptime
2010-09-06 14:46:56 +02:00
Mark Nauwelaerts
713719f705
qtdemux: improve framerate determining
...
Collect a limited number of starting sample durations and use the median of
those to determine caps framerate.
2010-09-06 14:45:43 +02:00
Mark Nauwelaerts
13b553bce7
matroskademux: attempt more resync upon (cluster) parse error
...
That is, if parse error occurs in state requiring to move to next cluster,
and doing so to the expected next position of cluster fails, then scan for a
next cluster from present position and resume from there.
Fixes #620790 .
2010-09-06 14:45:40 +02:00
Mark Nauwelaerts
4d9c1e99f2
matroskademux: not so fatal error handling
...
If some bits out of place in block(group) parsing, forego and move to next.
Also skip large blocks in pull mode, but need to give up in push mode.
Fixes #626463 .
Improves #620790 .
2010-09-06 14:45:37 +02:00
Mark Nauwelaerts
680eb51b68
matroskademux: additional parse recovery
...
In particular, upon parse failure in one cluster, we may forego remaining
content and try resuming from next cluster onwards.
Fixes #620790 .
2010-09-06 14:45:30 +02:00
American Dynamics
5999e8e716
rtspsrc: Add property to configure udpsrc buffer size
...
Add a new udp-buffer-size property to configure the buffer-size on the udpsrc
elements.
Fixes #628058
2010-09-06 12:22:11 +02:00
Wim Taymans
93228ccd52
rtpbin: add ntp-sync property
...
Add an ntp-sync property that will sync the received streams to the server
NTP time. This requires synchronized NTP times between the sender and receivers,
like with ntpd.
Based on patch from Thijs Vermeir.
Fixes #627796
2010-09-06 11:01:57 +02:00
Wim Taymans
f03fd91400
jitterbuffer: rename a variable to avoid confusion
2010-09-06 11:01:57 +02:00
Wim Taymans
e3479630ae
rtpbin: rename some variables for less confusion
2010-09-06 11:01:57 +02:00
Wim Taymans
0f59664c6a
rtpjitterbuffer: move comment where it belongs
2010-09-06 11:01:57 +02:00
Wim Taymans
4fd81747f3
session: minor cleanups
...
Make clock snapshots more accurate by only sampling the same clock once.
2010-09-06 11:01:57 +02:00
Thijs Vermeir
51020549f0
rtpbin: add use-pipeline-clock property
...
With this property RTCP SR NTP times can be based
on the system clock (maybe synced with ntpd) or the
current pipeline clock.
https://bugzilla.gnome.org/show_bug.cgi?id=627796
2010-09-06 11:01:57 +02:00
Wim Taymans
3bae70ceea
rtspext: stop configuration on first failure
...
Stop the configuration of a stream as soon as some of the extensions return
FALSE.
Fixes #581294
2010-09-06 11:01:57 +02:00
Wim Taymans
6660817af1
multifdsink: use refcount to count host/port duplicates
...
Instead of adding multiple client structures for the same host/port pair, use a
refcount.
Add a send-duplicates feature that allows you to disable sending multiple copies
of the same packet to the same host when it was added multiple times. The
send-duplicates property is by default set to TRUE for backwards compatibility
although it is very likely that this is not desired behaviour.
2010-09-06 10:45:28 +02:00
Wim Taymans
e4f8144bbf
rtspsrc: implement custom event handler
...
Extend the _push_event() function so that it can also send events to the udp
sources when asked.
Implement a custum send_event function that correctly dispatches the downstream
events in TCP mode. This fixes sending EOS to rtspsrc and have it push the EOS
downstream.
2010-09-06 10:45:23 +02:00
Wim Taymans
fadade4d4a
jpegdepay: handle DISCONT and reset state
...
Put a DISCONT event on the next output buffer when the input buffer had a
DISCONT.
Make sure we clear our adapter and reset our state before going to PAUSED.
Free the qtables.
Fixes #626869
2010-09-06 10:23:07 +02:00
Wim Taymans
3ec0d6b245
g729pay: extend from right parent
2010-09-06 10:23:07 +02:00
Stefan Kost
3b91ea7c81
qtdemux: use GST_BOILERPLATE macro
2010-09-06 09:57:58 +03:00
Stefan Kost
1c47115b8e
videmixer: add a example showing how to use the child properties
...
Show how to position and set the alpho of the videos on gst-launch.
2010-09-06 09:57:57 +03:00
Stefan Kost
77fe8c151a
spectrum only aggregate magnitude/phase if user asks for it
2010-09-06 09:53:00 +03:00
Stefan Kost
0dca0becb2
spectrum: improve performance with local vars
...
Use 'input' instead of 'spectrum->input' which was intende already (variable
exists, but not used everywhere). Also use a local version of
'spectrum->input_pos'.
2010-09-06 09:53:00 +03:00
Stefan Kost
8beead14d0
spectrum: code cleanup
...
More comments and logging. Extract one complex condition to a variable. Reorder
some code for readability.
2010-09-06 09:53:00 +03:00
