Commit graph

29 commits

Author SHA1 Message Date
Sebastian Dröge
114f9584d4 tests: Fix event order warnings and dataflow before stream-start/segment event 2013-05-09 13:32:07 +02:00
Tim-Philipp Müller
666c8c11c6 Fix FSF address
https://bugzilla.gnome.org/show_bug.cgi?id=687520
2012-11-03 20:44:48 +00:00
Mark Nauwelaerts
47e7c91ab5 tests: port to new GLib thread API 2012-09-12 13:01:18 +02:00
Wim Taymans
a521252845 Add new GstMapInfo
Use a structure to hold info about the mapping. The application then keeps track
of this state and we can use it to unmap the memory again later.
2012-01-25 11:54:23 +01:00
Tim-Philipp Müller
2c8c44976f Replace deprecated GStaticMutex with GMutex
https://bugzilla.gnome.org/show_bug.cgi?id=662207
2012-01-22 22:44:59 +00:00
Wim Taymans
612b1fbb14 pad: add parent to other functions
Add parent to chain, chain_list, getrange and event functions.
2011-11-17 12:40:45 +01:00
Wim Taymans
09a8294d36 pad: add parent to the query function 2011-11-16 17:22:56 +01:00
Wim Taymans
b5c3e254b1 pad: remove getcaps and use caps query
Remove the getcaps function on the pad and use the CAPS query for
the same effect.
Add PROXY_CAPS to the pad flags. This instructs the default caps event and query
handlers to pass on the CAPS related queries and events. This simplifies a lot
of elements that passtrough caps negotiation.
Make two utility functions to proxy caps queries and aggregate the result. Needs
to use the pad forward function instead later.
Make the _query_peer_ utility functions use the gst_pad_peer_query() function to
make sure the probes are emited properly.
2011-11-15 11:20:48 +01:00
Wim Taymans
d169fa8728 fix request pad
Make all request pads take _%u in the template.
Fix up unit tests.
2011-11-03 17:49:45 +01:00
Sebastian Dröge
6bff1f968a tests: Update for negotiation related API changes 2011-05-16 15:33:11 +02:00
Wim Taymans
bdbc069348 Rework GstSegment handling
Improve GstSegment, rename some fields. The idea is to have the GstSegment
structure represent the timing structure of the buffers as they are generated by
the source or demuxer element.
gst_segment_set_seek() -> gst_segment_do_seek()
Rename the NEWSEGMENT event to SEGMENT.
Make parsing of the SEGMENT event into a GstSegment structure.
Pass a GstSegment structure when making a new SEGMENT event. This allows us to
pass the timing info directly to the next element. No accumulation is needed in
the receiving element, all the info is inside the element.
Remove gst_segment_set_newsegment(): This function as used to accumulate
segments received from upstream, which is now not needed anymore because the
segment event contains the complete timing information.
2011-05-16 11:37:52 +02:00
Wim Taymans
c07b57fc05 segment: remove _full version
Rename the _full versions of the functions to the normal function names.
2011-05-09 17:51:07 +02:00
Sebastian Dröge
f51a23a83c Merge branch 'master' into 0.11 2011-04-16 08:59:58 +02:00
Sebastian Dröge
b44d555865 multiqueue: Don't leak pads in the named pads unit test 2011-04-14 09:07:25 +02:00
Tim-Philipp Müller
0e94961069 tests: fix unusued-but-assigned-variable warnings with gcc 4.6 2011-04-11 15:08:30 +01:00
Wim Taymans
7a62d32a07 Merge branch 'master' into 0.11-fdo
Conflicts:
	docs/plugins/gstreamer-plugins.hierarchy
	gst/gstelement.c
2011-03-30 19:58:52 +02:00
Sebastian Dröge
8db570f48c multiqueue: Make assignment of queue IDs and pad names threadsafe
Also add a test for naming pads by the caller and return NULL
when requesting an already existing pad.
2011-03-30 10:52:36 +02:00
Wim Taymans
4a9a59df08 tests: make some tests compile 2011-03-28 20:08:46 +02:00
Jan Schmidt
d38933081e multiqueue test: Remove workaround for pad_task hangs
Remove code that isn't needed any longer, which sets the multiqueue
to PLAYING and back before unreffing, in order to avoid a deadlock
waiting for gstpad tasks that were never started. The problem seems
to have been fixed long ago.
2011-01-25 16:09:18 +10:00
Jan Schmidt
6d590c65e5 tests: Add a multiqueue sparse streams test 2010-10-27 18:11:35 +02:00
Edward Hervey
5a0cdc7001 tests: Fix multiqueue test for latest commits.
The problem lies in the fact that multiqueue will now operate somewhat
similarly to the flow aggregation logic of demuxers and therefore
will stopp whenever all downstream pads return NOT_LINKED and/or
UNEXPECTED and there's no more buffers to push.

The latest commits should not affect any regular use-case, but the bug
report will be kept open so the previous behaviour can be re-established
if needed.

Fixes #609486
2010-02-10 14:40:17 +01:00
Edward Hervey
9cc47f8cba Revert "multiqueue: handle UNEXPECTED flowreturn better"
This reverts commit fbdf4dceda.

Partly fixes #609274
2010-02-09 15:58:36 +01:00
Wim Taymans
fbdf4dceda multiqueue: handle UNEXPECTED flowreturn better
When we receive an UNEXPECTED flowreturn from downstream, we must not shutdown
the pushing thread because upstream will at some point push an EOS that we still
need to push further downstream.

To achieve this, convert the UNEXPECTED return value to OK. Add a fixme so that
we implement the right logic to propagate the flowreturn upstream at some point.

Also clean up the unit test a little.

Fixes #608136
2010-01-26 17:07:31 +01:00
Wim Taymans
cc8334905c Don't use gst_element_get_pad().
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_load_and_link):
* gst/gstutils.c: (gst_element_link_pads),
(gst_element_unlink_pads):
* libs/gst/check/gstcheck.c: (gst_check_setup_src_pad),
(gst_check_teardown_src_pad), (gst_check_setup_sink_pad),
(gst_check_teardown_sink_pad),
(gst_check_element_push_buffer_list):
* tests/check/elements/fakesink.c: (GST_START_TEST):
* tests/check/elements/filesink.c:
* tests/check/elements/filesrc.c: (GST_START_TEST):
* tests/check/elements/multiqueue.c: (setup_multiqueue),
(mq_sinkpad_to_srcpad):
* tests/check/elements/tee.c: (GST_START_TEST):
* tests/check/generic/sinks.c: (GST_START_TEST):
* tests/check/gst/gstbin.c: (GST_START_TEST):
* tests/check/gst/gstevent.c: (GST_START_TEST):
* tests/check/gst/gstghostpad.c: (GST_START_TEST):
* tests/check/gst/gstpipeline.c: (GST_START_TEST):
* tests/check/gst/gstquery.c: (GST_START_TEST):
* tests/check/gst/gstutils.c: (GST_START_TEST):
* tests/check/libs/basesrc.c: (GST_START_TEST):
* tests/check/pipelines/parse-launch.c: (run_delayed_test),
(gst_parse_test_element_change_state):
Don't use gst_element_get_pad().
2008-05-21 15:57:52 +00:00
Jan Schmidt
f37e97764b plugins/elements/gstmultiqueue.c: Make it so that pads are considered linked until a buffer is pushed and discovered ...
Original commit message from CVS:
* plugins/elements/gstmultiqueue.c: (gst_multi_queue_set_property),
(gst_multi_queue_request_new_pad), (gst_single_queue_flush),
(gst_multi_queue_loop), (gst_multi_queue_sink_activate_push):
Make it so that pads are considered linked until a buffer is pushed
and discovered otherwise. This avoids problems with decodebin2 hanging
after a seek in the filesrc ! decodebin2 name=d ! fakesink d. ! fakesink
case.
Make sure we lock the multiqueue when updating the max-size properties.
Fix a crash on Solaris in a debug statement in get_request_pad that
passes a NULL string to GST_DEBUG.
* tests/check/elements/multiqueue.c: (mq_dummypad_chain),
(run_output_order_test):
Fix the test to allow the first buffer on not-linked pads to come out
of sequence while multiqueue discovers that they are not-linked.
2007-10-25 15:14:02 +00:00
Jan Schmidt
4fb00301dd tests/check/elements/multiqueue.c: Use a GStaticMutex to protect all cases where libcheck fail_if/fail_unless macros ...
Original commit message from CVS:
* tests/check/elements/multiqueue.c: (mq_dummypad_chain),
(mq_dummypad_event), (run_output_order_test):
Use a GStaticMutex to protect all cases where libcheck
fail_if/fail_unless macros might be called from multiple threads
simultaneously to avoid errors like:
"check_pack.c:107: :-1081725400:Bad message type arg"
2007-07-16 16:04:49 +00:00
Jan Schmidt
afebd394fa plugins/elements/gstmultiqueue.*: Take the multiqueue lock when updating the fill level so we don't get confused.
Original commit message from CVS:
* plugins/elements/gstmultiqueue.c: (gst_multi_queue_init),
(gst_single_queue_flush), (apply_segment), (apply_buffer),
(gst_single_queue_push_one), (gst_multi_queue_loop),
(gst_multi_queue_sink_activate_push), (gst_multi_queue_sink_event),
(gst_multi_queue_src_activate_push), (wake_up_next_non_linked),
(compute_high_id), (gst_single_queue_new):
* plugins/elements/gstmultiqueue.h:
Take the multiqueue lock when updating the fill level so we don't get
confused.
After applying a buffer or event on the src pad segment, make sure to
call gst_data_queue_limits_changed() to get the data queue to unblock
and check the filled state again.
Rework the not-linked pad handling so the logic is that not-linked
pads can push as fast as they like, but only so they never get
ahead of any linked pads.
* tests/check/elements/multiqueue.c: (mq_sinkpad_to_srcpad),
(mq_dummypad_getcaps), (mq_dummypad_chain), (mq_dummypad_event),
(run_output_order_test), (GST_START_TEST), (multiqueue_suite):
Add a test to check that not-linked pads always stay behind
linked pads.
2007-06-26 14:45:15 +00:00
Tim-Philipp Müller
2a3d26e66e Fix multiqueue leaking buffers and events when downstream or the queue are flushing. Make refcounting assumptions exp...
Original commit message from CVS:
* libs/gst/base/gstdataqueue.c:
* libs/gst/base/gstdataqueue.h:
* plugins/elements/gstmultiqueue.c: (gst_single_queue_push_one),
(gst_multi_queue_item_new), (gst_multi_queue_chain),
(gst_multi_queue_sink_event):
* tests/check/elements/multiqueue.c: (multiqueue_suite):
Fix multiqueue leaking buffers and events when downstream or the
queue are flushing. Make refcounting assumptions explicit and
document them (shouldn't break existing code that uses it other than
maybe leak miniobjects, but that already happens anyway). Add unit
test for the most common flushing case. Fixes #423700.
2007-06-06 18:11:10 +00:00
Tim-Philipp Müller
df244cef04 plugins/elements/gstmultiqueue.c: Don't leak GCond.
Original commit message from CVS:
* plugins/elements/gstmultiqueue.c: (gst_single_queue_free):
Don't leak GCond.
* tests/check/Makefile.am:
* tests/check/elements/.cvsignore:
* tests/check/elements/multiqueue.c: (setup_multiqueue),
(GST_START_TEST), (multiqueue_suite):
Add some dead simple unit tests for the 'multiqueue' element
(some bits don't work yet and are disabled for now).
2007-03-28 18:38:11 +00:00