TDT and TOT sections, with PID=0x14, doesn't extend to several packets
and the section filter is not needed here and shouldn't be used at all
for these tables because the have a different structure.
For example, TDT tables were not parsed for odd hours because this bit
is the 'current_next_indicator' bit for the other sections, and the table
was discarded.
This is a problem if you tune to a channel which uses pid X and later tune to
another channel where X is used for another table (e.g. PMT).
The code that does that was actually already there but never used because the
pat structure was freed before. The commit that introduced those lines intended
to fix a memory leak, but we clean things up elsewhere.
Fixes#622725.
gst_mpeg_descriptor_find() expects the description field to be non-NULL.
This fixes a couple of calls where the value being passed is not
verified to be non-NULL first.
https://bugzilla.gnome.org/show_bug.cgi?id=620456
Some tables in MPEG-TS do not have a crc in the spec, so also mpegtsparse
is not calculating crc for sections with table_id 0x70 - 0x72 because they
do not have a CRC in the spec. See EN300468. Parse Time and Date table and
output bus message.
gcc 4.5 warns when comparing some integer with an enum value, in
the case of GstFlowReturn this is valid though. We should later
add GST_FLOW_CUSTOM_OK1, GST_FLOW_CUSTOM_OK2, etc. after new core
is released.
The current code just uses table id, subtable extension and version number to
check if the section has been seen before. However, this comparison is not
sufficient, causing actually new tables being dismissed.
Fixes bug #614479.
Because config.h defines __MSVCRT_VERSION__, which should be defined
before inclusion of any system header.
Also fixes mpegdemux Makefile.am LIBADD typo.
Fixes#606665
When the stream type is set to private data, gst-mpegtsdemux is trying to find
audio descriptors in PMT and look for AC3 (tag 0x6a) but doesn't look for EAC3
(tag 0x7a). Handle this case too.
Fixes bug #605904.
There is unfortunately no G_*_FORMAT conversion specifier for differences of
pointers in glib, and we can't rely either on all platforms being 64bit.
So let's just cast the difference to a gint and be done with it.
When sending new-segment to a stream, ensure that there is either a valid
PCR, or else wait until there's a PTS on the stream (dropping packets if
needed) in order to avoid generating an invlaid new-segments event.
https://bugzilla.gnome.org/show_bug.cgi?id=595161
Using a GstIterator is slow because we have to create/destroy that
iterator every single time.
We just do the threadsafe cookie check and list iteration ourselves.
There's no need for an extra function since all debuggin will require
a MpegTSPacketizer which means that the GType will be created, therefore
move the debug category initialization there.
This fixes naive seeking a tiny bit (by basically hinting at _data_cb
that it shouldn't expect the incoming buffers to be the ones just after
the previous ones).
Without this, seeking by more than 10mins forward would just end up in an
endless loop.
This attribute can't be used for function declarations because
it needs the function body. Instead of a forward declaration of
functions, move the function itself above it's first use.
Fixes bug #594489 and compilation with gcc 4.3 and earlier.
In the clips that I've found those streams, the lpcm header is
different than the DVD case.
Then the decoder need to know this in order to be able parse it.
Increased performance doing pull_range in blocks of 32Kb instead of 4Kb.
Caching the value of gst_adapter_available instead of calling it 3 times.
Added some comments with the header descriptions.
Peek enough data to avoid a corner case where could be readed data outside
the buffer.
Speed up some more inlining some functions and keeping another stream pointer
list to be used as iterator.
Sprinkle branch prediction macros accross the code.
Handling the seeking with flush in pull mode in the proper way.
If there is an ISO 639 language descriptor for a stream, send a language
code tag so that players can show a meaningful language for the audio and
subtitle streams.
Don't treat some streams (Private Stream 2) as LPCM when they're not. Fixes
playback of files that have private streams in them now that the PES filter
emits such packets.
If the estimated bitrate is lower than 188 bytes, there's most likely
something completely wrong with the two samples. If that happens,
force recalculation.
Use guint64 for observation PCR, I saw cases where it would overflow.
This allows debugging with mpegtsdemux:4 while being able to track what's
going on (and avoid taking up as much cpu for debugging as for the actual
demuxing process).
Sync from gst-fluendo-mpegdemux and have seeking/duration query
improvements in. No support however for wrapped around pcrs etc. but a
start nonetheless.
Also fix indentation issues.
This should remove the bogus error messages while still keeping the original
intent of this, which is to inform the pipeline/application/user that we
could not find any valid streams.
There are many reasons why pushing an event can fail, and not all of them are
because there's no link downstream (it could be because it was blocked, or
flushing).
itvhd masks its h264 video stream as a private stream making it harder for
other set top boxes to decode. this checks for specific program number, video
pid and stream type combination before declaring it as h264.
don't ignore the return value of pull_range because we only get a valid non-NULL
buffer when the return value is GST_FLOW_OK. Avoids a crash when the pipeline is
shutting down.
Ensure that the clossing segment is generated correctly and being
properly pushed.
Added some GST_DEBUG to check it.
Ensure that last_stop is updated in stream time.
Calculate duration as delta of PTS as it seems more correct than delta
of SCR in some clips that I tested.
Removed a line wrongly copy pasted in my previous commit.
Avoid an unsigned integer overflow.
Seek last_stop in stream time.
Clamp last_stop in stream time between first and last SCR.
Fixed a typo in the GST_DEBUG line and added some more info.
Original commit message from CVS:
* gst/mpegdemux/gstmpegtsdemux.c:
Don't forward duration requests in BYTES, since the returned
value doesn't mean anything. Fixes#566959
Original commit message from CVS:
* gst/mpegdemux/gstmpegdesc.h:
Fix up terrestrial delivery system descriptor defs.
They should be shifted otherwise wrong values are seen.
Original commit message from CVS:
* gst/mpegdemux/gstmpegdemux.c: (gst_flups_demux_src_query),
(gst_flups_demux_parse_pack_start):
Use the adjusted SCR for calculating the mux rate.
Don't update the rate estimation after a discont.
Original commit message from CVS:
* gst/mpegdemux/gstmpegdemux.c: (gst_flups_demux_send_data):
* gst/mpegdemux/gstmpegdemux.h:
The position member in the newsegment event corresponds to the
stream_time of the segment start position.
Original commit message from CVS:
Patch by: Robin Stocker <robin at nibor dot org>
* gst/mpegdemux/gstmpegdemux.c: (gst_flups_demux_src_query):
Converting from time to bytes operates on the stream_time, not the SCR
timeline.
The position reporting should happen in stream_time, not the segment
timestamp range. See #557161.
Original commit message from CVS:
Patch by: Sebastian Pölsterl <sebp at k-d-w dot org>
* gst/mpegdemux/mpegtspacketizer.c: (mpegts_packetizer_parse_eit):
Fix memleak. Fixes#565614.
Original commit message from CVS:
Patch by: Sebastian Pölsterl <sebp at k-d-w dot org>
* gst/mpegdemux/mpegtspacketizer.c: (mpegts_packetizer_parse_sdt):
Add a scrambled field to the service structures retrieved from SDT to
determine if a channel is scrambled. Fixes#565613.
Original commit message from CVS:
* gst/mpegdemux/gstmpegtsdemux.c:
* gst/mpegdemux/gstmpegtsdemux.h:
Enable latency code, since we're definitely after 0.10.12
Original commit message from CVS:
* gst/mpegdemux/gstmpegtsdemux.c:
Make private section pads have a caps set so they are not tried
to be linked in parse_launch for example.
Original commit message from CVS:
patch by: Josep Torra
* gst/mpegdemux/gstmpegtsdemux.c:
No need to reclaculate flush in this case.
Fixes some bad decode errors introduced.
Original commit message from CVS:
patch by: Sebastian Pölsterl
* gst/mpegdemux/gstmpegdesc.c:
Length should be a guint8 not a gint.
* gst/mpegdemux/mpegtspacketizer.c:
Convert text to utf8 for each descriptor separately and not
concatenate them first and convert after.
Original commit message from CVS:
Patch by: David Härdeman <david at hardeman dot nu>
* gst/mpegdemux/mpegtspacketizer.c: (mpegts_packetizer_parse_nit):
Add support for the frequency list descriptor, which provides
additional frequencies that should be scanned by a DVB application.
Fixes bug #557814.
Original commit message from CVS:
Patch by: Josep Torra
* gst/mpegdemux/gstmpegtsdemux.c:
* gst/mpegdemux/gstmpegtsdemux.h:
Properly handle some resync cases in the optimised
buffering strategy.
Original commit message from CVS:
* gst/mpegdemux/gstmpegdemux.c: (gst_flups_demux_send_data):
Make sure the mpegpsdemux element creates valid newsegment events.
Fixes#556428
Original commit message from CVS:
patch by: Sebastian Pölsterl
* gst/mpegdemux/mpegtspacketizer.c:
Fixes segfault in get_encoding_and_convert.
Fixes#556482
Original commit message from CVS:
patch by: Josep Torra
* gst/mpegdemux/gstmpegtsdemux.c:
Fixes a segfault in the adaptation buffer size strategy.
Fixes#556440
Original commit message from CVS:
* gst/mpegdemux/gstmpegdemux.c: (gst_flups_demux_send_data),
(gst_flups_demux_parse_pack_start):
Prevent a division by zero if last mux rate was zero.
If we're going to send a NEWSEGMENT event but the segment start
and the current buffer timestamp differ by more than a second we
will start the NEWSEGMENT at the buffer timestamp.
This fixes playback of the tv2-1_25.mpg file, which has 0 as first SCR
but the first PTS are around 1 hour and 40 minutes.
Fixes bug #553755.
Original commit message from CVS:
Patch by: Josep Torra
* gst/mpegdemux/gstmpegtsdemux.c:
Fix wrong firing of critical introduced by previous optimisation.
Original commit message from CVS:
Patch from: Josep Torra
* gst/mpegdemux/gstmpegtsdemux.c:
* gst/mpegdemux/gstmpegtsdemux.h:
Use a preallocated buffer per stream for PES packets sent on src pads.
Adaptively adjust buffer size appropriately.
Original commit message from CVS:
* gst/mpegdemux/gstmpegdemux.c: (gst_flups_demux_parse_pack_start):
* gst/mpegdemux/gstmpegtsdemux.c: (gst_fluts_demux_data_cb):
Fix build on macosx.
