This splits gst_matroska_demux_add_stream() into:
* gst_matroska_demux_parse_stream(): will read the Matroska bytestream
and fill a GstMatroskaTrackContext.
* gst_matroska_demux_parse_tracks(): will check there are no repeated
tracks.
* gst_matroska_demux_add_stream(): creates and sets up the pad for the
track.
https://bugzilla.gnome.org/show_bug.cgi?id=793333
This is necessary for MSE, where a new MSE initialization segment may be
appended at any point. These MSE initialization segments consist of an
entire WebM file until the first Cluster element (not included). [1]
Note that track definitions are ignored on successive headers, they must
match, but this is not checked by matroskademux (look for
`(!demux->tracks_parsed)` in the code).
Source pads are not altered when the new headers are read.
This patch has been splitted from the original patch from eocanha in [2].
[1] https://www.w3.org/TR/mse-byte-stream-format-webm/
[2] https://bug334082.bugzilla-attachments.gnome.org/attachment.cgi?id=362212https://bugzilla.gnome.org/show_bug.cgi?id=793333
The behaviour of split-now is to output the current GOP after
starting a new file.
The newly-added split-after signal will output the current GOP
to the old file if possible once a new GOP is opened.
https://bugzilla.gnome.org/show_bug.cgi?id=796982
This is to support Amlogic CODEC driver which does not provide a full
list of formats when the driver is initially opened. GStreamer does
not strictly need this full list initially, but only later, in order
to negotiate with downstream if multiple format can be selected.
With this change, we will no longer probe twice the device, since the
probed list can be directly used for negotation.
Add a debug message right before waiting for the driver.
This is useful in order to debug drivers without a properly
implemented decoder or encoder stop command.
For 59.94 FPS, it's common to set 60000 as timescale. For that
timescale, if the audio is late by as little as 0:00:00.000016666
(definitely less than one audio sample), lateness gets rounded to 1.
Added a safeguard that allows lateness up to 1 sample with the specific
trak's timescale, to make sure that values less than e.g. one audio
sample won't break the prefill mode. What will happen in this case is
that the audio will get squeezed back to the video's timestamp, which in
practice means that the audio will be 0.000016666 seconds early (with
the patch).
https://bugzilla.gnome.org/show_bug.cgi?id=797133
Accept wavpack correction streams (.wvc) on sink pad, so
that wavpackparse can also be used to packetise correction
streams.
Fix parsing of subblock ID tags - the higher bits are
flags and are not part of the ID. This resulted in
correction blocks not being recognised properly and
the output not having the right (correction) caps.
The speex headers assume that WIN32 will always be defined when
building on Windows, but this is only true by default on MinGW.
Always set it explicitly.
Currently, whenever we generate a 128-bit UID, we store it in a list and
return 0 if we ever encounter a collision. This is so mathematically
improbable that it's not worth checking for, so we can save memory and
time by not tracking the UID. Even if a collision happened, a list of
only 10 UIDs would be unlikely to detect it.
This article has a good description of how improbable a collision is:
https://en.wikipedia.org/wiki/Universally_unique_identifier#Collisionshttps://bugzilla.gnome.org/show_bug.cgi?id=797086
We now have options for all plugins, so we will just disable these in
the cerbero recipe instead. These require external deps, so they won't
affect gst-build either.
This patch clears the sample table whenever the demuxing of a new
fragment begins. This avoids increasing memory usage for long videos.
This behavior was already present when upstream_format_is_time; this
patch extends it to all push mode operation (e.g. Media Source
Extensions).
https://bugzilla.gnome.org/show_bug.cgi?id=796899
This allow forcing going through the transform driver even if there
isn't an conversion happening. This is usedful when the m2m driver can
be used to adapt the type of memory between two drivers.
Both rtpmp4vpay and rtpmp4gpay support MPEG4 elementary streams. But
the most supported variant is the video-specific one (rtpmp4vpay),
therefore increase the rank of that one so that auto-plugging of
payloaders for MPEG4 elementary streams ends up picking that one
and not the generic one.
If we have cluster prev size (GStreamer muxer will write it by default),
we can go back to the previous cluster efficiently, but if we don't then
just search backwards until we find a cluster ebml identifier, like we
do when searching for clusters in the bisection loop.
Add property instead of hardcoding it in the code.
In some scenarios such as CCTV variable fps and extra long GOPs are
used to minimise storage space, for example. In those cases there might
not be any keyframes for many minutes, so provide a property to override
the max allowed distance.
https://bugzilla.gnome.org/show_bug.cgi?id=790696
When seeking in pull mode without an index (because there is no index
or the file is still being written to) we bisect to find the right
cluster to jump to. However, it's possible the cluster we found doesn't
start with a keyframe, which leads to decoding errors, so if we know
that the found cluster starts with a delta frame try to scan back to
previous clusters until we find one that starts with a keyframe or
we are back at the beginning. Theoretically it's possible that all
clusters but the first one do not start with a keyframe and the
keyframes are in the middle of clusters, but this is extremely
unusual, so we will cover this case with a basic sanity check.
This problem is especially problematic with content recorded with
dynamic GOP and FPS, where long GOP lengths and low FPS may cause a
large set of clusters to lack key frames. Playback would then be
started on a non-keyframe cluster, and the large number of such frames
would make the content impossible to decode fo a long stretch of time.
Based on patch by: Mats Lindestam <matslm@axis.com>
https://bugzilla.gnome.org/show_bug.cgi?id=790696
This is useful for reverse playback/trickmodes
without an index, and will also be useful in the
seek handler if we need to scan back to find a cluster
that starts with a keyframe.
https://bugzilla.gnome.org/show_bug.cgi?id=790696
This method will check if a buffer, base on it's video meta,
can be imported. It will also try and adapt the request stride
in case this is the only that miss-match.
https://bugzilla.gnome.org/show_bug.cgi?id=583890
The preparation code imports the buffer, doing bunch of
validation. Only queue the buffer in the driver if the
importation worked. This way we don't rely on the driver
to validate.
https://bugzilla.gnome.org/show_bug.cgi?id=583890
This change has no effect. We will need to acquire a buffer from the
pool later in order to validate / adapt with the video alignment for
the downstream buffers.
https://bugzilla.gnome.org/show_bug.cgi?id=583890
Always initially use try_format(), delaying set_format() to when the
allocation is being negotiated. This avoid having two code paths, and
will be help adding support for properly importing buffers of specific
strides and offsets.
https://bugzilla.gnome.org/show_bug.cgi?id=583890
This is an enum not a boolean, and a value of 2 signals
that the video is progressive, but we would mistakenly set
interlace-mode=mixed on the output caps.
https://bugzilla.gnome.org/show_bug.cgi?id=787206
The desired colorimetry is logged with all parameters (colorpsace,
range, matrix, and transfer function), but of the values actually
set by the driver, only colorspace is logged. Complete the debug
log message to display all colorimetry parameters:
Desired colorspace is 8:1:1:1
Got format of 640x480, format YU12, nb planes 1, colorspace 8
->
Desired colorspace is 8:1:1:1
Got format of 640x480, format YU12, nb planes 1, colorspace 8:0:0:0
https://bugzilla.gnome.org/show_bug.cgi?id=796940
gstjpegdec sets 1:4:0:0 colorimetry (full range BT.601 YCbCr encoding
with unknown primaries and unknown transfer function). This currently
gets translated to bt601 or bt709 depending on resolution.
Both cases result in a negotiation failure:
ERROR: from element /GstPipeline:pipeline0/v4l2video0convert:v4l2video0convert0: Device '/dev/video0' does not support 1:4:0:0 colorimetry
Improve the guessing game by selecting JPEG colorimetry (JPEG colorspace
with sRGB transfer function) under these specific conditions, and loosen
the matching so that 1:4:0:0 input gets accepted if the device is
actually configured to 1:4:7:1 (V4L2_PIX_FMT_JPEG default).
https://bugzilla.gnome.org/show_bug.cgi?id=796940
