Add network interface selection when joining multicast groups.
Useful when using the udpsrc on multihomed hosts.
Fixes#575234.
API: GstUDPSrc::multicast-iface
Previously the sockaddr length used for recvfrom() was calculated as
sizeof (struct sockaddr). However, this is too little to hold an IPv6
address, so the full size of the gst_sockaddr union should be used
instead.
When we are dealing with connected sockets shared between a udpsrc and a udpsink
we might receive ICMP connection refused error messages in udpsrc that will
cause it to go into a bursty loop because the poll returns right away without a
message to read.
Instead of looping, read the error message from the error queue in udpsrc.
Fixes#567857.
Link to properties. Correct titles for examples. Document a few trivial cases. Keep lists in section file and docs/plugins/Makefile.am alphabetically ordered. Fix warnings that gtk-doc points out.
Link to properties. Correct titles for examples. Document a few trivial cases. Keep lists in section file and docs/plugins/Makefile.am alphabetically ordered.
Original commit message from CVS:
* gst/udp/gstmultiudpsink.c:
* gst/udp/gstudpnetutils.c:
* gst/udp/gstudpnetutils.h:
* gst/udp/gstudpsrc.c:
Fix multiudpsink on OSX by passing the specific length of the socket,
refactor that into a function shared with the same thing in udpsrc.
Original commit message from CVS:
* gst/udp/gstudpsrc.c: (gst_udpsrc_class_init),
(gst_udpsrc_set_uri), (gst_udpsrc_start):
Switch on the socket family to get the addrlen size right.
Original commit message from CVS:
Patch by: Daniel Franke <df at dfranke dot us>
* gst/udp/gstudpsrc.c: (gst_udpsrc_create), (gst_udpsrc_start):
OS X's bind() implementation is picky about its addrlen parameter and
fails with EINVAL if it is larger than expected for the socket's address
family. Set the length to the expected length instead. Fixes#553191.
Original commit message from CVS:
* gst/goom/convolve_fx.c:
* gst/goom/filters.c:
* gst/goom/goom_config.h:
* gst/goom/goom_core.c:
* gst/goom/goom_tools.h:
Fix build with MSVC: include glib.h to define inline appropriately,
use header guards where needed.
* gst/udp/gstudpnetutils.c:
* gst/udp/gstudpsrc.c:
Fix build with MSVC: use WSA* constants/functions where appropriate, use
g_snprintf rather than snprintf.
Fixes#544433.
Original commit message from CVS:
* gst/udp/gstudpsrc.c: (gst_udpsrc_start):
Call getsockname() after the call to bind() to get updated values
for the port, etc. This fixes the usage of udpsrc on anonymous
binding and it's usage by rtspsrc. Fixes bugs #539372, #539548.
Thanks to Aurelien Grimaud for pointing out the obvious fix.
Original commit message from CVS:
* gst/udp/gstudpsrc.c: (gst_udpsrc_class_init), (gst_udpsrc_init),
(gst_udpsrc_create), (gst_udpsrc_set_property),
(gst_udpsrc_get_property), (gst_udpsrc_start), (gst_udpsrc_stop):
* gst/udp/gstudpsrc.h:
Add property to control automatic join/leave of multicast groups.
Add G_LIKELY.
Remove setting caps on buffers explicitly, basesrc does that for us now.
Improve debug info.
Convert some non-fatal error into warnings.
Use g_ntohs for better portability.
Leave multicast groups when stopping.
When using external sockets, use getsockname() on them to fill up the
addr structure before calling methods that use the structure.
Should all fix#536903.
API: GstUDPSrc::auto-multicast property
Original commit message from CVS:
* gst/udp/gstmultiudpsink.c: (gst_multiudpsink_init_send),
(gst_multiudpsink_add_internal):
* gst/udp/gstudpnetutils.c: (gst_udp_set_loop_ttl),
(gst_udp_join_group):
* gst/udp/gstudpnetutils.h:
* gst/udp/gstudpsrc.c: (gst_udpsrc_start):
Joining a multicast group and setting the loop/ttl properties are
totally unrelated tasks are must be separated.
Original commit message from CVS:
Patch by: Bruno Santos <brunof at ua dot pt>
* gst/udp/gstudpnetutils.c: (gst_udp_get_addr),
(gst_udp_join_group), (gst_udp_leave_group),
(gst_udp_is_multicast):
* gst/udp/gstudpnetutils.h:
Provide a bunch of helper methods to deal with IPv4 and IPv6
transparently.
* gst/udp/gstmultiudpsink.c: (gst_multiudpsink_class_init),
(gst_multiudpsink_init), (gst_multiudpsink_set_property),
(gst_multiudpsink_get_property), (join_multicast),
(gst_multiudpsink_init_send), (gst_multiudpsink_add_internal),
(gst_multiudpsink_remove):
* gst/udp/gstmultiudpsink.h:
Add multicast TTL and loopback properties.
Use the helper methods to implement ip4 and ip6.
* gst/udp/gstudpsrc.c: (gst_udpsrc_create), (gst_udpsrc_start):
* gst/udp/gstudpsrc.h:
Use the helper methods to implement ip4 and ip6.
Fixes#515962.
Original commit message from CVS:
Patch by: Youness Alaoui <youness.alaoui at collabora co uk>
* gst/udp/gstudpsrc.c: (gst_udpsrc_create):
Don't error out if we get an ICMP destination-unreachable
message when trying to read packets on win32 (#529454).
Original commit message from CVS:
* gst/rtp/gstasteriskh263.c: (gst_asteriskh263_chain):
* gst/udp/gstmultiudpsink.c: (gst_multiudpsink_add_internal):
* gst/udp/gstudpsrc.c: (gst_udpsrc_start):
Use GLib versions of htonl, htons, ntohl and ntohs in order
to avoid problems on win32 (#529707).
Original commit message from CVS:
Patch by: Ole André Vadla Ravnås <ole.andre.ravnas@tandberg.com>
* gst/udp/gstudpsrc.c: (gst_udpsrc_finalize), (gst_udpsrc_start),
(gst_udpsrc_stop):
Properly balance WSA_Cleanup with WSA_Startup.
Also make the poll controllable on windows. Fixes#520888.
Original commit message from CVS:
Patch by: Peter Kjellerstedt <pkj at axis com>
* gst/udp/gstudpsrc.c: (gst_udpsrc_init), (gst_udpsrc_create),
(gst_udpsrc_get_property), (gst_udpsrc_start), (gst_udpsrc_unlock),
(gst_udpsrc_unlock_stop), (gst_udpsrc_stop):
* gst/udp/gstudpsrc.h:
Port to GstPoll. See #505417.
Original commit message from CVS:
Patch by: Ole André Vadla Ravnås <ole.andre.ravnas@tandberg.com>
* configure.ac:
* gst/udp/gstdynudpsink.c:
* gst/udp/gstdynudpsink.h:
* gst/udp/gstmultiudpsink.c:
* gst/udp/gstmultiudpsink.h:
* gst/udp/gstudpsink.c:
* gst/udp/gstudpsink.h:
Fix includes for MSVC and GLib-2.14.0 (#492388).
* gst/udp/gstudpsrc.c: (gst_udpsrc_start):
No more pipe define since GLib-2.14.0, need to use _pipe() directly.
Original commit message from CVS:
Based on patch by: Laurent Glayal <spglegle yahoo fr>
* gst/udp/gstudpsrc.c: (gst_udpsrc_create):
When the socket is used by the app for other purposes, don't generate an
error if there is activaty on the socket that is not data related.
Fixes#487488.
Original commit message from CVS:
* gst/udp/gstudpsrc.c: (gst_udpsrc_init), (gst_udpsrc_create):
Make udpsrc timestamp outgoing buffers based on when they were received.
Also make it output a segment in time.
Original commit message from CVS:
* gst/udp/gstmultiudpsink.c: (gst_multiudpsink_class_init),
(gst_multiudpsink_init), (gst_multiudpsink_set_property),
(gst_multiudpsink_get_property), (gst_multiudpsink_init_send),
(gst_multiudpsink_close), (gst_multiudpsink_add):
* gst/udp/gstmultiudpsink.h:
Add support for getting and setting the socket to use.
* gst/udp/gstudpsrc.c: (gst_udpsrc_class_init), (gst_udpsrc_init),
(gst_udpsrc_create), (gst_udpsrc_get_property):
Add support for getting the currently used socket.
Original commit message from CVS:
* gst/udp/gstudpsrc.c: (gst_udpsrc_create):
Improve UDP performance by avoiding a select() when we have data
available immediatly.
Original commit message from CVS:
* gst/udp/gstudpsrc.c: (gst_udpsrc_class_init),
(gst_udpsrc_create), (gst_udpsrc_unlock), (gst_udpsrc_unlock_stop):
Since we depend on 0.10.13 -core, override the unlock_stop vmethod for
safer shutdown.
Original commit message from CVS:
* gst/udp/gstmultiudpsink.c: (gst_multiudpsink_add):
Fix multicast detection.
Don't try to join a multicast group if the address is not multicast.
* gst/udp/gstudpsrc.c: (gst_udpsrc_update_uri):
Small debug improvement.
Original commit message from CVS:
* gst/udp/gstudpsrc.c: (gst_udpsrc_create):
Handle the case where there are exactly 0 bytes to read and the ioctl
did not report an error. Fixes#433530.
Original commit message from CVS:
Patch by: Laurent Glayal <spglegle at yahoo dot fr>
* gst/udp/gstdynudpsink.c: (gst_dynudpsink_class_init),
(gst_dynudpsink_init), (gst_dynudpsink_set_property),
(gst_dynudpsink_get_property), (gst_dynudpsink_init_send),
(gst_dynudpsink_close):
* gst/udp/gstdynudpsink.h:
* gst/udp/gstudpsrc.c: (gst_udpsrc_class_init), (gst_udpsrc_init),
(gst_udpsrc_create), (gst_udpsrc_set_property),
(gst_udpsrc_get_property), (gst_udpsrc_start), (gst_udpsrc_stop):
* gst/udp/gstudpsrc.h:
Rework the socket allocation a bit based on the sockfd argument so that
it becomes usable.
Add a closefd property to instruct the udp elements to close the custom
file descriptors when going to READY. Fixes#423304.
API:GstUDPSrc::closefd property
API:GstDynUDPSink::closefd property
Original commit message from CVS:
* gst/avi/gstavimux.c:
Comment a #if 0 in caps template definition as VS6 seems to
do not support it.
* gst/rtsp/gstrtspsrc.c:(gst_rtspsrc_loop_udp):
Use gst_guint64_to_gdouble for conversion.
* gst/rtsp/rtspconnection.c:(rtsp_connection_send):
Move variables declaration before the first instruction.
* gst/rtsp/rtspdefs.c:(rtsp_strresult):
Don't use hstrerror for error log on G_OS_WIN32 build as it's not supported.
And don't include netdb.h for G_OS_WIN32
* gst/rtsp/sdpmessage.c:(sdp_parse_line):
This initialization SDPMedia nmedia = {.media = NULL }; is not supported
by VS6 then use an other way to initialize SDPMedia structure.
* gst/udp/gstdynudpsink.h:
* gst/udp/gstdynudpnetutils.h:
Do not include <sys/time.h> for G_OS_WIN32
* gst/udp/gstudpsrc.c:
Define socklen_t as int for G_OS_WIN32
* win/common/config.h.in:
Undef HAVE_NETINET_IN_H
* win32/vs6/gst_plugins_good.dsw:
* win32/vs6/libgstrtp.dsp:
* win32/vs6/libgstrtsp.dsp:
* win32/vs6/libgstautogen.dsp:
* win32/vs6/libgstaudiofx.dsp:
* win32/vs6/libgstudp.dsp:
Add and update project files.
* win32/common/gstudp-enumtypes.c:
* win32/common/gstudp-enumtypes.h:
Add a copy of udp enumtypes to win32/common as in core
and base.
Original commit message from CVS:
Patch by: Vincent Torri <vtorri at univ-evry fr>
* ext/jpeg/gstjpegdec.c:
* ext/jpeg/gstjpegenc.c:
* ext/jpeg/smokecodec.c:
These libjpeg callbacks should return a 'boolean' (unsigned char
apparently) and not a 'gboolean' (which maps to gint). Fixes
warnings when compiling with MingW (#393427).
* gst/rtsp/rtspconnection.c: (rtsp_connection_read):
Use ioctlsocket on win32.
* gst/udp/gstudpsrc.c: (gst_udpsrc_create):
Some printf format fixes for win32.
Original commit message from CVS:
Patch by: Rob Taylor <robtaylor at floopily dot org>
* gst/udp/gstudpsrc.c: (gst_udpsrc_start):
If using multicast in udpsrc, bind to the multicast address rather than
IN_ADDR_ANY.
This allows the simultanous use of multiple udpsrcs listening on
different multicat addresses. Without this all udpsrcs will receive all
packets from all subscribed multicast addresses.
Fixes#383001.
Original commit message from CVS:
Patch by: Sebastien Cote <sebas642 at yahoo dot ca>
* gst/udp/gstudpsrc.c: (gst_udpsrc_class_init),
(gst_udpsrc_finalize), (gst_udpsrc_create), (gst_udpsrc_set_uri),
(gst_udpsrc_start):
Fix some leaks in caps and uris. Fixes#361252.
Original commit message from CVS:
* gst/rtsp/URLS:
Add some more URLs.
* gst/rtsp/gstrtspsrc.c: (gst_rtspsrc_class_init),
(gst_rtspsrc_init), (gst_rtspsrc_finalize),
(gst_rtspsrc_set_property), (gst_rtspsrc_get_property),
(gst_rtspsrc_stream_setup_rtp), (gst_rtspsrc_loop_interleaved),
(gst_rtspsrc_loop_udp), (gst_rtspsrc_loop_send_cmd),
(gst_rtspsrc_loop), (gst_rtspsrc_send),
(gst_rtspsrc_parse_methods), (gst_rtspsrc_open),
(gst_rtspsrc_close), (gst_rtspsrc_play), (gst_rtspsrc_pause),
(gst_rtspsrc_handle_message), (gst_rtspsrc_change_state):
* gst/rtsp/gstrtspsrc.h:
Add timeout property to control UDP timeouts.
Fix error messages.
Also start a loop function when operating in UDP mode so that we can
do some more stuff async.
Handle element messages from udpsrc to detect timeouts. If a timeout
happens we currently generate an error.
API: rtspsrc::timeout property.
* gst/udp/gstudpsrc.c: (gst_udpsrc_class_init),
(gst_udpsrc_create):
Really implement the timeout in microseconds and not milliseconds.
Original commit message from CVS:
* gst/udp/gstudpsrc.c: (gst_udpsrc_class_init), (gst_udpsrc_init),
(gst_udpsrc_create), (gst_udpsrc_set_property),
(gst_udpsrc_get_property), (gst_udpsrc_unlock), (gst_udpsrc_stop):
* gst/udp/gstudpsrc.h:
Added property to post a message on timeout.
Updated docs.
When restarting the select, initialize the fdsets again.
Init control sockets so we don't accidentally close a random socket.
API: GstUDPSrc::timeout property
Original commit message from CVS:
Patch by: Antoine Tremblay <hexa00 at gmail dot com>
* gst/udp/gstudpsrc.c: (gst_udpsrc_create):
Fix possible infinite loop when shutting down, a read can also return
0 to indicate no more messages are available. Fixes#358156.
Original commit message from CVS:
Patch by: Peter Kjellerstedt <pkj at axis com>
* gst/alpha/gstalpha.c:
* gst/rtp/gstrtpamrdepay.c:
* gst/rtsp/gstrtspsrc.c:
* gst/udp/gstudpsrc.c:
* gst/videomixer/videomixer.c:
Include stdlib.h in some more places, makes things compile
with uClibc and -Werror (#357592).
