Nicolas Dufresne
cc8e1ca2ac
v4l2slh264dec: Fix B-Frame weight table
...
We where not setting the luma l1 weight table.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1563 >
2020-09-10 15:21:57 +00:00
Seungha Yang
2b152eae69
videoparsers: Add vp9parse element
...
Adding vp9parse element to parse various stream information such as
resolution, profile, and so on. If upstream does not provide resolution and/or
profile, this would be useful for decodebin pipeline for autoplugging
suitable decoder element depending on template caps of each decoder element.
In addition, vp9parse element supports unpacking superframe into
single frame for decoders. The vp9 superframe is a frame which consists
of multiple frames (or superframe with one frame is allowed) followed by superframe
index block. Then unpacked each frame will be considered as normal frame
by decoder. The decision for unpacking will be done by downstream element's
"alignment" caps field, which can be "super-frame" or "frame".
If downstream specifies the "alignment" as "frame",
then vp9parse element will split an incoming superframe into single frames
and the superframe index (located at the end of the superframe) data
will be discarded by vp9parse element.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1041 >
2020-09-10 14:56:52 +00:00
Seungha Yang
47bbc997f8
mfvideosrc: Set timestamp on buffer when it's captured
...
Capture the timestamp immediately when new frame is arrived,
instead of doing that on ::create() method. There would be
time gap between captured time and outputting time.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1351 >
2020-09-10 10:21:00 +00:00
Mathieu Duponchelle
c58357fb66
line21enc: add remove-caption-meta property
...
Similar to #GstCCExtractor:remove-caption-meta
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1554 >
2020-09-09 22:11:28 +02:00
Mathieu Duponchelle
c07e2a89ba
line21enc: heavily constrain video height
...
We can only determine a correct placement for the CC line
with:
* height == 525 (standard NTSC, line 21 / 22)
* height == 486 (NTSC usable lines + 6 lines for VBI, line 1 / 2)
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1554 >
2020-09-09 19:38:58 +02:00
Mathieu Duponchelle
1d416750d1
line21enc: add support for CDP closed caption meta
...
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1554 >
2020-09-09 19:12:11 +02:00
Edward Hervey
66f5e87435
adaptivedemux: Add another nominal bitrate fallback calculation
...
Some HTTP servers don't provide fragment sizes (with the Content-Length HTTP
header). In order to still figure out a nominal bitrate (for usage by queue2),
calculate on when we're done downloading a fragment.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1544 >
2020-09-09 11:19:17 +02:00
Edward Hervey
298eedad8b
adaptivedemux: Handle invalid HTTP duration
...
The default BYTE DURATION basesrc query handler will return `-1` and TRUE. In
order to properly handle cases where upstream http servers didn't return a valid
Content-Length we also need to check whether it was valid when calculating
bitrates.
Avoids returning completely bogus bitrates with gogol's video streaming services
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1544 >
2020-09-09 11:18:22 +02:00
Seungha Yang
d1d2acead1
mfvideoenc: Add support for zero-copy encoding
...
Add custom IMFMediaBuffer and IMF2DBuffer implementation in order to
keep track of lifecycle of Media Foundation memory object.
By this new implementation, we can pass raw memory of upstream buffer
to Media Foundation without copy.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1518 >
2020-09-09 07:25:52 +00:00
Jan Alexander Steffens (heftig)
16a07d303a
rtmp2: Replace stats queue with stats lock
...
Making the thread receiving the stats wait on the loop to respond was
not a good idea, as the latter can get blocked on the streaming thread.
Have get_stats read the values directly, adding a lock to ensure we
don't read garbage.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1550 >
2020-09-09 06:34:51 +00:00
Nazar Mokrynskyi
ebc057bb7a
rtmp2sink: add docs section with since marker on new stop-commands property
...
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1256 >
2020-09-09 05:53:08 +00:00
Nazar Mokrynskyi
8c37eea410
rtmp2: fix code style, update documentation cache
...
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1256 >
2020-09-09 05:53:08 +00:00
Jan Alexander Steffens (heftig)
30274dee52
rtmp2: Clean up (improve) GstRtmpStopCommands type
...
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1256 >
2020-09-09 05:53:08 +00:00
Nazar Mokrynskyi
9a2828c216
rtmp2sink: handle EOS event and close stream
...
https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/issues/1285
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1256 >
2020-09-09 05:53:08 +00:00
Jan Alexander Steffens (heftig)
66f9d37c37
mpegtsmux: Make handling of sinkpads thread-safe
...
Ensure we take the object lock while accessing `GstElement.sinkpads`.
Use an iterator when the code isn't simple to avoid deadlock.
When we find the best pad, take a reference so a concurrent pad
release doesn't destroy the pad before we're done with it.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1553 >
2020-09-09 02:25:40 +00:00
Jan Alexander Steffens (heftig)
3f9a7e5c73
hlssink2: Actually release splitmuxsink's pads
...
It was looking at the "outer" peer of the ghost pad, not the "inner"
peer (the target).
It provided the wrong pad to gst_element_release_request_pad.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1551 >
2020-09-09 01:06:21 +00:00
Edward Hervey
1068083135
mpegtsmux: Don't create streams with reserved PID
...
There are quite a few reserved PID in the various MPEG-TS (and derivate)
specifications which we should definitely not use. Those PID have a certain
meaning and purpose.
Furthermore, a lot of the code in the muxer implementation also makes assumption
on the purpose of streams based on their PID.
Therefore, when requesting a pad with a specific PID, make sure it is not a
restricted PID.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1561 >
2020-09-08 21:09:36 +00:00
Tim-Philipp Müller
5f0942fd36
ci: include template from gst-ci master branch again
2020-09-08 17:30:42 +01:00
Tim-Philipp Müller
9b082e7467
Back to development
2020-09-08 16:58:50 +01:00
Tim-Philipp Müller
7cb583bb04
Release 1.18.0
2020-09-08 00:07:47 +01:00
Tim-Philipp Müller
1919a8873e
meson: dist pot file in tarball
...
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1558 >
2020-09-07 22:48:27 +01:00
Sebastian Dröge
64039cdf84
gst: Update for gst_video_transfer_function_*() function renaming
...
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1557 >
2020-09-07 12:14:47 +03:00
Jan Alexander Steffens (heftig)
ebe397892b
tests: mpegtsmux: Test that we can manipulate pads after stop
...
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1552 >
2020-09-01 14:01:56 +00:00
Jan Alexander Steffens (heftig)
ef8142ef90
mpegtsmux: Keep mux usable after stop
...
Otherwise you cannot request new pads until after it is started again.
gst_base_ts_mux_reset with FALSE is still called in the dispose
implementation, so the muxer still gets deallocated when we actually
clean up.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1552 >
2020-09-01 14:01:56 +00:00
Haihao Xiang
cc3057e4ea
msdkvp9dec: change the include header order
...
This fixes the compiler error when MFX_VERSION_USE_LATEST is defined in
the SDK.
/usr/include/mfx/mfxvp9.h:48:5: error: unknown type name ‘mfxExtBuffer’
mfxExtBuffer Header;
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1549 >
2020-09-01 13:57:13 +08:00
Nirbheek Chauhan
ce18a344f4
rtmp2: Need to unescape the userinfo before setting
...
This regressed in 827afa206d
. The same
fix was also committed to the webrtc element, but rtmp2 was missed.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1547 >
2020-08-30 09:53:42 +00:00
Nirbheek Chauhan
16d84a2816
webrtc: Clean up the userinfo unescaping code
...
Continuation from 04fd705906
. This is
easier to understand and also avoids two copies.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1547 >
2020-08-30 09:53:42 +00:00
Jérôme Laheurte
ccfb799d83
dshowsrcwrapper: Update build instructions. Add _builddir to include search path.
...
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1537 >
2020-08-28 23:00:53 +00:00
Jonathan Matthew
2b024ec1b4
modplug: avoid division by zero
...
Under some conditions, GetMaxPosition() returns zero, which should cause
position queries to fail rather than crash.
2020-08-28 08:10:04 +10:00
trilene
04fd705906
webrtc: Unescape turnserver user and password
...
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1530 >
2020-08-26 23:37:17 +01:00
Fabrice Fontaine
833a65cc3c
meson: allow the user to disable opencv
...
Allow the user to really disable opencv through meson (i.e.
-Dopencv=disabled).
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1533 >
2020-08-26 18:19:22 +00:00
Tim-Philipp Müller
b48702e4bc
sctp: usrsctp: increase DIAG_MSG_LEN to accomodate longer file path
...
Fixes "‘%s’ directive output truncated writing XX bytes into
a region of size NN [-Wformat-truncation=]" compiler warnings.
https://github.com/sctplab/usrsctp/pull/521
Fixes #1389
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1540 >
2020-08-26 00:00:24 +01:00
Jérôme Laheurte
02666d929f
dshowsrcwrapper: fix typo in variable name
...
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1538 >
2020-08-25 10:49:11 +02:00
Wim Taymans
258b2b15dc
vulkan: fix the enumtypes install path
...
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1528 >
2020-08-25 00:04:18 +00:00
Philippe Normand
2caa3e0230
wpe: skip glbasesrc decide_allocation when non-GL caps are negotiated
...
Checking for GL caps features in gl_start() was done too late in case the parent
class fails to setup a working GL context. The element now determines if GL
support should be enabled during the decide-allocation query handling.
Additionally, when no GL context was found, we need to handle the element
cleanup because in that situation glbasesrc won't call gl_stop.
Fixes https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/issues/1376
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1532 >
2020-08-24 20:59:50 +00:00
Seungha Yang
25c87a1315
codecs: h264decoder: Fix possible GstH264Picture leak and small cleanup
...
Don't leak pictures when dpb is full unexpectedly.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1527 >
2020-08-24 20:35:01 +00:00
Seungha Yang
95e007ac49
d3d11videosink: Fix crash caused by missing null termination
...
gst_caps_features_new() must be null terminated.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1524 >
2020-08-24 20:03:05 +00:00
Víctor Manuel Jáquez Leal
7c696b67be
va: allocator: remove parameter from _create_buffer_surface()
...
Don't the allocator to _create_buffer_surface() since it's not used.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1516 >
2020-08-24 19:35:57 +00:00
Víctor Manuel Jáquez Leal
80de32b017
va: utils: free allocated string
...
and fix a memleak
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1516 >
2020-08-24 19:35:57 +00:00
Víctor Manuel Jáquez Leal
69a00541dd
va: utils: fix log category initialization
...
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1516 >
2020-08-24 19:35:57 +00:00
Víctor Manuel Jáquez Leal
c905f6131d
va: h264dec: check va allocator at decide allocation
...
And some code cleanups
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1516 >
2020-08-24 19:35:57 +00:00
Víctor Manuel Jáquez Leal
f755730b20
va: decoder: improve locks for member variable access
...
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1516 >
2020-08-24 19:35:57 +00:00
Matthew Waters
e15a8fcbdd
webrtc/datachannel: clear the error after use
...
Fixes a memory leak
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1535 >
2020-08-24 17:02:35 +10:00
Matthew Waters
7489addc0a
webrtc/datachannel: free previous protocol/label fields
...
Fixes a memory leak
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1535 >
2020-08-24 17:02:35 +10:00
Matthew Waters
e4b848e2a8
tests/webrtc: unref GBytes after use
...
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1535 >
2020-08-24 17:02:35 +10:00
Matthew Waters
e5a2e3ac4c
sctpdec: unref after retrieving the static pad template
...
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1535 >
2020-08-24 17:02:35 +10:00
Tim-Philipp Müller
29e969493b
Release 1.17.90
2020-08-20 16:14:25 +01:00
Matthew Waters
9011539940
webrtc/ice: resolve .local candidates internally
...
Requires the system's DNS resolver to support mdns resolution.
Fixes interoperablity with recent versions of chrome/firefox that
produce .local address in for local candidates.
Fixes https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/issues/1139
2020-08-20 13:01:17 +10:00
J. Kim
8e9f8c7f2c
srtobject: set error when canceled waiting for a caller
...
To propagate error, this commit sets a reason. Otherwise, the function
caller should check if `error` is NULL when the return value is not normal.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1522 >
2020-08-19 12:01:37 +00:00
J. Kim
ebdb3447ce
srtobject: fix typo, s/errorj/error
...
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1522 >
2020-08-19 11:31:41 +00:00