This moves all the conversion related code to a single place, allows
less code-duplication inside compositor and makes the glmixer code less
awkward. It's also the same pattern as used by GstAudioAggregator.
The aggregated_frame is now called prepared_frame and passed to the
prepare_frame and cleanup_frame virtual methods directly. For the
currently queued buffer there is a method on the video aggregator pad
now.
With the way caps negotiation work in encoders, the only way to ensure
that no downstream renegotiation is done in the encoder is to also lock
upstream caps. Anyway with the current behavior upstream of encoders
*require* to handle any file format so locking upstream format should
be safe.
https://bugzilla.gnome.org/show_bug.cgi?id=795464
Otherwise decodebin won't get notified about STREAM_COLLECTION comming
from the sources and thus will never get informored about it. Without
being informed about the stream collection decodebin won't be able to
select any streams. It ends up not creating any output for the streams
defined from outside parserbin.
https://bugzilla.gnome.org/show_bug.cgi?id=795364
Instead go backwards before segment.stop based on the framerate or the
next buffers end timestamp. Otherwise the first buffer will usually be
dropped because outside the segment.
https://bugzilla.gnome.org/show_bug.cgi?id=781899
Buffering messages are only sent for the active group (in case there
is more than one).
If the inactive group posts buffering messages we keep the last one
around and will post it once it becomes the playing one.
In order to flush out multiqueue, we send again a STREAM_START and
then a EOS event.
The problem was that was that we might end up pushing out on the
output of multiqueue (and therefore decodebin3) a series of:
* EOS / STREAM_START / EOS
Apart from the uglyness of such output, If decodebin3 is used with
elements such as concat on their output, they might potentially
block on that second STREAM_START.
In order to make sure we don't end up in that situation we send
a custom STREAM_START event when refreshing multiqueue (which we
drop on the output) and we don't special case EOS events on streams
on which we already got EOS.
At worst we now end up sending at most two EOS on the output of
multiqueue (and decodebin3).
Similar in vein to the playbin2 architecture except that uridecodebin3
are prerolled much earlier and all streams of the same type are
fed through a 'concat' element.
This keeps the philosphy of having all elements connected as soon
as possible.
The 'about-to-finish' signal is emitted whenever one of the uridecodebin
is about to finish, allowing the users to set the next uri/suburi.
The notion of a group being active has changed. It now means that the
uridecodebin3 has been activated, but doesn't mean it is the one
currently being outputted by the sinks (i.e. curr_group and next_group).
This is done via detecting GST_MESSAGE_STREAM_START emission by playsink
and figuring out which group is really playing.
When the current group changes, a new thread is started to deactivate
the previous one and optionnaly fire 'about-to-finish'.
Apologies for the big commit, but it wasn't really possible to split it
in anything smaller.
* Switch to uridecodebin3 instead of managing urisourcebin and decodebin3
ourselves. No major architectural change with this.
* Reconfigure sinks/outputs when needed. This is possible thanks to the
various streams-related API. Instead of blocking new pads and waiting
for a (fake) no-more-pads to decide what to connect, we instead reconfigure
playsink and the combiners to whatever types are currently selected. All of
this is done in reconfigure_output().
New pads are immediately connected to (combiners and) sinks, allowing
immediate negotiation and usage.
* Since elements are always connected, the "cached-duration" feature is gone
and queries can reach the target elements.
* The auto-plugging related code is currently disabled entirely until
we get the new proper API.
* Store collections at the GstSourceGroup level and not globally
* And more comments a bit everywhere
NOTE: gapless is still not functional, but this opens the way to be able
to handle it in a streams-aware fashion (where several uridecodebin3 can
be active at the same time).
With push-based sources, urisourcebin will emit this signal when
the stream has been fully consumed.
This signal can be used to know when the source is done providing
data.
With playbin the last subtitle chunk would not get displayed
if the last chunk was missing a newline at the end. This is
because streamsynchronizer will hold back the EOS event until
the audio and video streams are finished too, so subparse
would never forcefully push out the last chunk until the very
end when it is too late.
We get a STREAM_GROUP_DONE event from streamsynchronizer however,
so handle that like EOS and force out any remaining text then.
https://bugzilla.gnome.org/show_bug.cgi?id=771853
(yes, this has never worked since it was introduced, don't worry)
If we want to actually detect layer/channels/samplerate changes,
it would be better to:
* not reset the various prev_* variables at every iteration.
* and actually store the values when they change
CID #206079
CID #206080
CID #206081
To passthrough crop-meta, the converter would need to allocate and
convert buffers of the size of the originating buffer. This is currently
made difficult by GstBaseTransform since we cannot alter the caps passed
though the allocation query. We would also need to wait for the first
input buffer to be received in order to make the decision around that
size.
So the short and safe solution is just to stop pretending we can
passthrought that meta.
https://bugzilla.gnome.org/show_bug.cgi?id=791412
If select-stream event was send to playbin3 as missing any GstStream of ES type
(V or A or TEX) of collection then, playbin will access to invalid address of
GstStream due to invalid index limit. This caused SIGSEGV.
https://bugzilla.gnome.org/show_bug.cgi?id=791638
The qt typefinder uses guint64 values for offset and size calculation
but the typefinder system only supports gint64 values.
Make sure we don't end up using potentially overflowing values.
The qt typefinder uses guint64 values for offset and size calculation
but the typefinder system only supports gint64 values.
Make sure we don't end up using potentially overflowing values.
n_frames could end up being quite big (potentially up to G_MAXINT64). Which
would result in overflowing 64bits when multiplying it by GST_SECOND.
Instead move GST_SECOND to the num argument
If we are shutting down, don't spawn a cleanup thread to cleanup old
groups and instead queue them to be cleaned up in the state change
thread.
This avoids (hopefully for good) having a race between the state change
thread and other threads trying to deactivate elements/pads.
Deactivating pads from two threads isn't 100% MT-safe. There is a
slim chance that the GstPadActivateFunc might be called twice with
the same values (in this case from the cleanup thread *and* from
the GstElement change_state function when going from PAUSED to READY).
In order to avoid that, call any existing cleanup function *before*
calling the parent change_state implementation on downwards state
changes.
When deactivating pads, we need to ensure that the streaming threads
going through the pads we wish to deactivate can cleanly return.
Failure to do that would result in the streaming locks of those
pads never being released. The end result would be a deadlock
when stopping decodebin2.
In order to avoid that situation, release the "dyn" lock around
the deactivation code. And refactor the code to cope with the
list of blocked pads having potentially changed when re-acquiring
the lock.
We have a dedicated one-shot thread to handle cleanup of old groups.
While this is a good idea. It's an even better idea to make sure
that thread is *completed* before the parsebin element to which
it is related isn't freed/gone.
* There can only be one cleanup thread happening at any point in time.
If there is already one, we wait for the previous one to finish.
* When shutting down (NULL=>READY) make sure the thread is finished
https://bugzilla.gnome.org/show_bug.cgi?id=790007
We have a dedicated one-shot thread to handle cleanup of old groups.
While this is a good idea. It's an even better idea to make sure
that thread is *completed* before the decodebin2 element to which
it is related isn't freed/gone.
* There can only be one cleanup thread happening at any point in time.
If there is already one, we wait for the previous one to finish.
* When shutting down (NULL=>READY) make sure the thread is finished
https://bugzilla.gnome.org/show_bug.cgi?id=790007
Instead of emitting 'drained' whenever every single chain is drained
(which would result in plenty of signal emission, and would also
occur when switching groups), only emit it when the top-level chain
is drained.
Furthermore, mark unknown (and therefore unexposed) pads as drained
since we'll never get EOS on them.
https://bugzilla.gnome.org/show_bug.cgi?id=787367
