Commit graph

109 commits

Author SHA1 Message Date
Philippe Normand
73721ad4e9 mssdemux: improved live playback support
When a MSS server hosts a live stream the fragments listed in the
manifest usually don't have accurate timestamps and duration, except
for the first fragment, which additionally stores timing information
for the few upcoming fragments. In this scenario it is useless to
periodically fetch and update the manifest and the fragments list can
be incrementally built by parsing the first/current fragment.

https://bugzilla.gnome.org/show_bug.cgi?id=755036
2016-11-29 14:43:41 +01:00
Philippe Normand
b35979c31a mssdemux: wrap unmodified data in protection event
PlayReady being the one of the few DRM formats encoding its data with
base64 it was not consistent to have a special case for this. So the
base64 decoding operation now needs to be done by the protection event
consumer, if needed.

https://bugzilla.gnome.org/show_bug.cgi?id=774112
2016-11-14 11:50:07 +01:00
Matthew Waters
e9178fa082 smoothstreaming: implement adaptivedemux's get_live_seek_range()
Allows seeking through the available fragments that are still available
on the server as specified by the DVRWindowLength attribute in the
manifest.

https://bugzilla.gnome.org/show_bug.cgi?id=774178
2016-11-11 00:18:35 +11:00
Sebastian Dröge
4f6ae1f48c adaptivedemux: Enable bitrate selection for trick mode streaming again
And scale the bitrate with the absolute rate (if it's bigger than 1.0) to get
to the real bitrate due to faster playback.

This allowed in my tests to play a stream with 10x speed without buffering as
the lowest bitrate is chosen, instead of staying/selecting the highest bitrate
and then buffering all the time.

It was previously disabled for not very well specified reasons, which seem to
be not valid anymore nowadays.
2016-08-25 19:52:37 +03:00
Vineeth TM
8cdfb13658 bad: use new gst_element_class_add_static_pad_template()
https://bugzilla.gnome.org/show_bug.cgi?id=763081
2016-03-24 14:56:51 +02:00
Thiago Santos
ac2734f5cb mssdemux: implement snap seeking
Implement snap seek flags handling in stream_seek to allow the
parent class to handle it for us

https://bugzilla.gnome.org/show_bug.cgi?id=759158
2016-02-04 14:20:16 -03:00
Thiago Santos
c01d266238 mssdemux: use correct seek position on reverse seeks
Otherwise it was always using the 'start' value, leading to wrong
behavior
2016-02-04 14:20:16 -03:00
Thiago Santos
1b12d7f8a3 mssdemux: only update download position if the seek requests to
Some seeks are only updating the stop position, there is no need
to change the current downloading position.
2016-02-04 14:20:16 -03:00
Thiago Santos
731ab94cc3 adaptivedemux: handle snap seeks
Adaptive demuxers need to start downloading from specific positions
(fragments) for every stream, this means that all streams can snap-seek
to a different position when requested. Snap seeking in this case will
be done in 2 steps:

1) do the snap seeking on the pad that received the seek event and
   get the final position

2) use this position to do a regular seek on the other streams to
   make sure they all start from the same position

More arguments were added to the stream_seek function, allowing better control
of how seeking is done. Knowing the flags and the playback direction allows
subclasses to handle snap-seeking.
And also adds a new return parameter to inform of the final
selected seeking position that is used to align the other streams.

https://bugzilla.gnome.org/show_bug.cgi?id=759158
2016-02-04 14:05:08 -03:00
Thiago Santos
b7a0be23c6 adaptivedemux: replace ghostpad with a standard pad
Handling the ghostpad and its internal pad was causing more issues
than helping because of their coupled activation/deactivation
actions.

As we have to install custom chain,event and query functions it is
better to use a floating sink pad internally in the demuxer and just
use those pad functions to push through a standard pad in the demuxer

https://bugzilla.gnome.org/show_bug.cgi?id=757951
2016-01-15 11:32:37 -03:00
Philippe Normand
bf1246cb13 mssdemux: activate streams before configuring bitrate
Doing the contrary has no effect and the consequence is that playback
will start with the lowest bitrate even if we can already handle
higher bitrate.

https://bugzilla.gnome.org/show_bug.cgi?id=755108
2015-09-30 16:54:20 +01:00
Philippe Normand
ae7d938842 mssdemux: PlayReady WRM parsing support
If the manifest has a ProtectionHeader node then parse it and emit
protection events according to the specified protection SystemID.

https://bugzilla.gnome.org/show_bug.cgi?id=753613
2015-09-30 16:49:11 +01:00
Sebastian Dröge
0cd3938345 adaptivedemux: Allow subclasses to override how a new manifest would be downloaded 2015-04-23 17:47:18 +02:00
Thiago Santos
2526c7b286 mssdemux: use correct function to clear fragment info
Just freeing the url won't reset the byte ranges and can lead to wrong
ranges being used.
2015-02-17 11:41:27 -03:00
Thiago Santos
f7a1649c77 adaptivedemux: add bitrate-limit property
Move the property from subclasses to adaptivedemux, it allows
selecing the percentage of the measured bitrate to be used when
selecting stream bitrates
2015-02-17 11:12:42 -03:00
Thiago Santos
e9ab79dc36 adaptivedemux: add connection-speed property
Allows to set a bitrate directly instead of measuring it internally
based on the received chunks. The connection-speed was removed from
mssdemux and hlsdemux as it is now in the base class
2015-02-17 11:12:41 -03:00
Thiago Santos
8c49c79d7e mssdemux: add live support
Implement the functions of adaptivedemux to have live support
enabled. This allows mssdemux to refresh the Manifest periodically
2014-12-04 19:52:33 -03:00
Thiago Santos
b418c88b26 mssdemux: port to adaptivedemux base class 2014-12-04 14:24:42 -03:00
Thiago Santos
613b110b25 mssdemux: seeks in the manifest never fail
Set void as the return and remove error handling as it could
never fail
2014-11-07 19:30:18 -03:00
Tim-Philipp Müller
f216b7bb11 Sprinkle some G_PARAM_DEPRECATED and #ifndef GST_REMOVE_DEPRECATED 2014-11-02 17:19:34 +00:00
Thiago Santos
e644b5e6ae mssdemux: do not unlock not locked mutex 2014-10-31 17:33:55 -03:00
George Kiagiadakis
e289ab07c1 mssdemux: synchronize with the download loop thread to signal it to continue
If EOS or ERROR happens before the download loop thread has reached its
g_cond_wait() call, then the g_cond_signal doesn't have any effect and
the download loop thread stucks later.

https://bugzilla.gnome.org/show_bug.cgi?id=735663
2014-09-18 13:38:29 -03:00
Thiago Santos
01ccac24fa mssdemux: fix clearing of eos state in pads
The internal pad still keeps its EOS flag and event as it can be assigned
after the flush-start/stop pair is sent. The EOS is assigned from the streaming
thread so this is racy.

To be sure to clear it, it has to be done after setting the source to READY to
be sure that its streaming thread isn't running.

https://bugzilla.gnome.org/show_bug.cgi?id=736012
2014-09-18 12:14:30 -03:00
Matthieu Bouron
bce21e7398 mssdemux: improve position detection when a download restart
Query other src pads before falling back to the position of the last
known pushed segment (which can be far ahead in time).

https://bugzilla.gnome.org/show_bug.cgi?id=736421
2014-09-11 18:25:19 -03:00
Sebastian Dröge
bda4eae1cc mssdemux: Don't send flush events to deactivated pads
https://bugzilla.gnome.org/show_bug.cgi?id=736012
2014-09-04 18:21:38 +03:00
Sebastian Dröge
546feaef5c mssdemux: Always use the redirect target to resolve relative URIs
But redownload the playlists from the original URI if it's not
a permanent redirect.
2014-05-28 12:56:24 +02:00
Thiago Santos
ce7319c62d mssdemux: avoid deadlocking when erroring
It might get stuck when posting the message while
a reconfigure event is being pushed upstream
2014-05-12 18:28:45 -03:00
Thiago Santos
a1f87d0b4f mssdemux: fix caps leak 2014-05-12 18:08:12 -03:00
Thiago Santos
6b8448c245 mssdemux: handle error messages from internal source
set up a bin message handler to get notified of error messages from
the internal source element
2014-05-12 18:08:12 -03:00
Thiago Santos
b627d7df83 mssdemux: Always accept the latency configure event
Upstream or internal elements are irrelevant and we should
always succeed.
2014-05-12 16:27:37 -03:00
Thiago Santos
b54367e211 mssdemux: reenable segment tracking for streams
Store the latest pushed timestamp so that mssdemux streams know
where they are in time
2014-05-12 16:27:37 -03:00
Thiago Santos
45d5859131 mssdemux: deprecate unused max-queue-size-buffers
There is no internal storage of buffers anymore
2014-05-12 16:27:37 -03:00
Thiago Santos
99a2e425de mssdemux: measure bitrate similarly to hlsdemux
new bitrate = (old bitrate + (last fragment bitrate * 3)) / 4
2014-05-12 16:27:37 -03:00
Thiago Santos
90577c3ae7 mssdemux: remove uridownloader in favor of internal source
Refactor mssdemux to remove uridownloader to use an internal
source element which reduces startup latency and provides smaller
buffers for better buffering management downstream
2014-05-12 16:27:37 -03:00
Sebastian Dröge
3c2fe80ab6 mssdemux: Update for uri downloader API changes 2014-05-05 09:41:51 +02:00
Sebastian Dröge
5d34b071d9 mssdemux: Update for URI downloader API changes
And include the manifest file as referer in requests, and make sure
to set refresh=TRUE when updating the manifest.
2014-05-02 10:43:06 +02:00
Vincent Penquerc'h
14f8172d2b smoothstreaming: avoid using an uninitialized manifest
If we did not set the manifest yet, early out in the seeking query.

Coverity 1139737
2014-04-10 09:51:07 +01:00
Vincent Penquerc'h
88879654df smoothstreaming: remove unnecessary check
The function is static, the only call site passes a non NULL
pointer, and the pointer is dereferenced before anyway.

Coverity 1139839
2014-04-09 17:10:06 +01:00
Sebastian Dröge
b47a4faf5f ext: Use Codec/Demuxer/Adaptive for the adaptive streaming demuxers 2014-02-23 00:11:04 +01:00
Sebastian Dröge
a11c6640bf mssdemux: Download the manifest with compression, the fragments without 2014-02-12 13:11:38 +01:00
Sebastian Dröge
3a5abc233d ext: Update for GstUriDownloader API changes 2014-02-11 14:18:32 +01:00
Thiago Santos
6348113777 mssdemux: updating docs explaining how it works
mssdemux changed a lot and the docs were not correct anymore.

Also adds the 'Adaptive' category to its details
2013-12-20 00:40:42 -03:00
Thiago Santos
ff1e88ce93 mssdemux: do not push event holding object lock
Can lead to deadlocks as the push might block downstream in
serialized event cases.
2013-12-20 00:40:42 -03:00
Thiago Santos
aa61251371 mssdemux: lock around 'cancelled' flag
Prevents race conditions when pipeline is seeking near eos
2013-12-20 00:40:42 -03:00
Thiago Santos
26acbbcca9 mssdemux: make sure streams stop properly on cancelled
specially when the gst_task_join is waiting for the task
to go stop and the task itself sets its back to paused, causing
a deadlock on exit.
2013-12-18 18:52:19 -03:00
Thiago Santos
99c8fb7330 mssdemux: track segments per stream
As streams now flow independently, the GstSegment needs to be put
on each stream so they can track the position of each one correctly
instead of being mixed in a single segment
2013-12-18 18:52:19 -03:00
Guillaume Desmottes
f44c6ed526 mssdemux: push language code tag
https://bugzilla.gnome.org/show_bug.cgi?id=712358
2013-12-18 18:52:19 -03:00
Thiago Santos
67f3190301 mssdemux: remove the stream loop task
Download and push from the same task, makes code a lot simpler
to maintain. Also pushing from separate threads avoids deadlocking
when gst_pad_push blocks due to downstream queues being full
2013-12-18 18:52:19 -03:00
Thiago Santos
4e6e1315da mssdemux: Improve logging
Show the stream's pad on log messages to make easier to debug
issues in the multiple threads
2013-12-18 18:52:18 -03:00
Thiago Santos
056420940e mssdemux: improve flow return handling
Handle different flow returns both from the streaming and the
downloading loops
2013-12-18 18:52:18 -03:00