else gst_video_meta_validate_alignment will report error like
"videometa gstvideometa.c:416:gst_video_meta_validate_alignment: Stride of plane 0 defined in meta (384) is different from the one computed from the alignment (320)"
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1224>
in C, & is weaker than the ! operator and clang is giving the following
error about it.
```
../subprojects/gst-plugins-bad/sys/msdk/gstmsdkdec.c:731:7: error: logical not is only applied to the left hand side of this bitwise operator [-Werror,-Wlogical-not-parentheses]
if (!gst_msdk_context_get_job_type (thiz->context) & GST_MSDK_JOB_DECODER) {
^ ~
../subprojects/gst-plugins-bad/sys/msdk/gstmsdkdec.c:731:7: note: add parentheses after the '!' to evaluate the bitwise operator first
if (!gst_msdk_context_get_job_type (thiz->context) & GST_MSDK_JOB_DECODER) {
^
( )
../subprojects/gst-plugins-bad/sys/msdk/gstmsdkdec.c:731:7: note: add parentheses around left hand side expression to silence this warning
if (!gst_msdk_context_get_job_type (thiz->context) & GST_MSDK_JOB_DECODER) {
^
( )
1 error generated.
```
The media driver can support HEVC 8-bit 422 encoding for non-lowpower
mode since ICL[1], so VPP is not needed for this case.
Sample pipeline:
gst-launch-1.0 videotestsrc ! video/x-raw,format=YUY2 ! msdkh265enc ! \
filesink location=output.h265
[1] https://github.com/intel/media-driver#decodingencoding-features
video/x-vp9 is required in the src pad, however the output includes a
IVF header, which makes the pipeline below doesn't work
gst-launch-1.0 videotestsrc ! msdkvp9enc ! msdkvp9dec ! fakesink
Since mfx 1.26, the VP9 encoder supports bitstream without IVF header,
so in this patch, the mfx version is checked and msdkvp9enc is enabled
only if mfx 1.26+ is available
User is seeing corrupted display when running `videotestsrc !
video/x-raw,format=NV12,width=xxx,height=xxx ! msdkh265enc ! msdkh265dec
! glimagesink` with changed frame size, e.g. from 1920x1080 to 1920x240
The root cause is a same dmabuf fd is used for frames with
different size, which causes some unexpected result. This patch requires
cached response is used for frames with same size only for DMABuf, so a
dmabuf fd can't be used for frames with different size any more.
This patch fixed compiler warning below:
[1/4] Compiling C object 'sys/msdk/dc44ea0@@gstmsdk@sha/gstmsdkvpp.c.o'.
../../gst-plugins-bad/sys/msdk/gstmsdkvpp.c: In function
‘gst_msdkvpp_context_prepare’:
../../gst-plugins-bad/sys/msdk/gstmsdkvpp.c:214:7: warning: suggest
parentheses around operand of ‘!’ or change ‘&’ to ‘&&’ or ‘!’ to ‘~’
[-Wparentheses]
Our context is non-persistent, and we propagate it throughout the
pipeline. This means that if we try to reuse any gstmsdk element by
removing it from the pipeline and then re-adding it, we'll clone the
mfxSession and create a new gstmsdk context as a child of the old one
inside `gst_msdk_context_new_with_parent()`.
Normally this only allocates a few KB inside the driver, but on
Windows it seems to allocate tens of MBs which leads to linearly
increasing memory usage for each PLAYING->NULL->PLAYING state cycle
for the process. The contexts will only be freed when the pipeline
itself goes to `NULL`, which would defeat the purpose of dynamic
pipelines.
Essentially, we need to optimize the case in which the element is
removed from the pipeline and re-added and the same context is re-set
on it. To detect that case, we set the context on `old_context`, and
compare it to the new one when preparing the context. If they're the
same, we don't need to do anything.
Fixes https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/issues/946
Split it out into a separate function with early exits to make the
flow clearer, and document what the function is doing clearly.
No functional changes.
Before this change decoder used the oldest frame in the list to pair it
with the decoded surface. This only works when there's a perfect stream
like HEADERS,SYNCPOINT,DELTA...
When playing RTSP streams we can get imperfect streams like HEADERS,
DELTA,SYNCPOINT,DELTA... In this case decoder drops the frames
between HEADERS and SYNCPOINT which leads into using wrong PTS on
the output frames.
With this change we inject the input PTS into the bitstream and use it
to align the internal frame list with the actually decoded position.
Fixes playback with:
```
gst-launch-1.0 rtspsrc location=... latency=0 drop-on-latency=1 ! ...
```
need_reconfig is added to allow sub class requires a reconfig when
the input frame or the MetaData (e.g. GstVideoRegionOfInterestMeta)
attached to the input frame is changed.
Commit a1584b6 caused big performance drop if the downstream element
is not a msdk element because it is very slow to read data from video
memory directly.
This reverts commit a1584b6f99.
The codec profile should be consistent with the frame fourcc code, this
fixes pipeline below:
gst-launch-1.0 videotestsrc ! \
video/x-raw,width=320,height=240,format=P010_10LE ! msdkvp9enc ! \
fakesink
The frame width and height is rounded up to 128 and 32 since commit
8daac1c, so the width, height for initialization should be rounded up to
128 and 32 too because the MSDK VP9 encoder will do some check on width
and height.
Sample pipeline:
gst-launch-1.0 videotestsrc ! \
video/x-raw,width=320,height=240,format=NV12 ! msdkvp9enc ! fakesink
Renegotiation was implemented for bitrate change. We can re-use
the same sequence when video info changes except that this can be
executed right away when receiving the new input format. I.e. no
need to wait for the next call to handle_frame.
The block that sets use_video_memory flag is after the
the condition `if gst_msdk_context_prepare` but it
always returns false when there is no other msdk elements.
So the decoder ends up with use_video_memory as FALSE.
Note that msdkvpp always set use_video_memory as TRUE.
When use_video_memory is FALSE then the msdkdec allocates
the output frames with posix_memalign (see gstmsdksystemmemory.c).
The result is then copied back to the GstVideoPool's buffers
(or to the downstream pool's buffers if any).
When use_video_memory is TRUE then the msdkdec uses vaCreateSurfaces
to create vaapi surfaces for the hw decoder to decode into
(see gstmsdkvideomemory.c). The result is then copied to either
the internal GstVideoPool and to the downstream pool if any.
(vaDeriveImage/vaMapBuffer is used in order to read the surfaces)
Use boolean instead of GstFlowReturn as declared.
Note that since base class does not check return value of GstVideoDecoder::flush(),
this would not cause any change of behavior.
https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/merge_requests/924
is trying to use video memory for decoding on Linux, which reveals a
hidden bug in msdkdec.
For video memory, it is possible that a locked mfx surface is not used
indeed and it will be un-locked later in MSDK, so we have to check the
associated MSDK surface to find out and free un-used surfaces, otherwise
it is easy to exhaust all pre-allocated mfx surfaces and get errors below:
0:00:00.777324879 27290 0x564b65a510a0 ERROR default
gstmsdkvideomemory.c:77:gst_msdk_video_allocator_get_surface: failed to
get surface available
0:00:00.777429079 27290 0x564b65a510a0 ERROR msdkbufferpool
gstmsdkbufferpool.c:260:gst_msdk_buffer_pool_alloc_buffer:<msdkbufferpool0>
failed to create new MSDK memory
Note the sample code in MSDK does similar thing in
CBuffering::SyncFrameSurfaces()
Otherwise GstVideoDecoder is not finalized and
resources are leaked.
Somehow GST_TRACERS="leaks" GST_DEBUG="GST_TRACER:7" did not catch it.
Valgrind output:
==31645== 22,480 (1,400 direct, 21,080 indirect) bytes in 5 blocks are definitely lost in loss record 5,042 of 5,049
==31645== at 0x4C2FB0F: malloc
==31645== by 0x51D9E88: g_malloc
==31645== by 0x51FA7B5: g_slice_alloc
==31645== by 0x51FAC68: g_slice_alloc0
==31645== by 0x58D9984: g_type_create_instance
==31645== by 0x58BA344: g_object_new_with_properties
==31645== by 0x58BADA0: g_object_new
==31645== by 0x8ECA966: gst_video_decoder_init
==31645== by 0x58D99E7: g_type_create_instance
==31645== by 0x58BA344: g_object_new_with_properties
An issue can be seen when using msdkh265enc with bitrate change in
playing state. The root cause is the corresponding plugin is loaded
again.
Returning MFX_ERR_UNDEFINED_BEHAVIOR from MSDK just means the plugin has
been loaded, so we may ignore this error when doing configuation again
in the sub class, otherwise the pipeline will be interrupted
In theory it should not happen but it happened to me
in some cases where it failed to allocate some video
buffers so this was a consequence of a corner case.
Better to be safe than sorry.
Can happen if the oldest frame is the current frame
and if gst_video_decoder_finish_frame failed in which
case the current is unref and then drop instead of
just drop.
This patch also removes some assumptions, it was strange
to call unref and finish_frame in gst_msdkdec_finish_task.
In principle when owning a frame, the code should either
unref, or drop or finish.
The for loop in gst_msdkdec_handle_frame is error prone
about how it manages surfaces. Because sometimes it sets
the surface variable to NULL and sometimes it needs to free
it right away. So better to print an error if surfaces are
leaked to help with any change around the loop.
msdk plugin is not used for sofware encode/decode as there are better
solutions available. Also, with MFX_IMPL_AUTO_ANY, if software decode
is not supported, the plugin will still load, but will then fail when trying to
run the (autoplugged) pipeline. With MFX_IMPL_HARDWARE_ANY,
the plugin fails and a better software decoder is auto-plugged.
Can be reproduced with:
videotestsrc ! x264enc key-int-max=$N ! \
h264parse ! msdkh264dec ! fakesink sync=1
It happens with any gop size but the smaller is the distance N
between key frames, the quicker it is leaking.
Fixes#1023
In case of pkg-config we need to create the include directories object
from the path using include_directories(). For INTELMEDIASDKROOT or
MFX_HOME we need to add the alternate include path ./include/mfx as
Intel MediaSDK now puts the headers there.
In future, a sub class of GstMsdkEncClass may decide a native format by
using this method, e.g. JPEG encoder may accept YUY2 input, however the
current implemation needs a conversion from YUY2 to NV12 before encoding.
In addtion, a sub class may choose a format for encoding if the input
format is not supported by MSDK, e.g. the current implemation does
UYVY->NV12 if the input format is UYVY. We may do UYVY->YUY2 for JPEG
encoder in future
MFX_FOURCC_BGR4 is mapped to VA_FOURCC_ABGR and JPEG encoder needs a
MFX_FOURCC_BGR4 frame for internal usage when the input format is
MFX_FOURCC_RGB4
This is a preparation for supporting native formats of JPEG encoder
Instead of using a proxy of `is_packetized` flag this patch
replaces it with the accessor to that flag in decoder base class,
avoiding probable mismatches.
commit 55c0d720 added the capability to handle non-packetized bitstream,
and there is a loop to handle multiple frames in a non-packetized buffer
in gst_msdkdec_handle_frame. However it is possible that a
non-packetized buffer still contains valid data but there is no long any
pending unfinished frame. Currently gst_video_decoder_decode_frame is
invoked to send a new frame with new input data, the situaltion is
repeated till an EOS is received. An application has to exit when
receiving an EOS, however there is still valid data in a
non-packetezied input buffer, hence some frames are dropped.
This fix adds a parse callback for non-packeteized input, a new frame
will be sent to the subclass as soon as the input buffer has valid data
This fixes https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/issues/665
Upon bitrate change, make sure to close the encoder otherwise
the encoder is not re-initialized and the target bitrate is
never reached, and the encoder was flushed at each frame
from this moment.
Regression introduced in f2b35abcab which replaced the call
that was closing the encoder by an early return to avoid
re-initialization.
The first channel in memory for MFX_FOURCC_RGB4 (VA_FOURCC_ARGB or
GST_VIDEO_FORMAT_BGRA) is B, not A. In MSDK, channle B is used to access
data for RGB4 surface. In addition, the returned pointers for
MFX_FOURCC_AYUV and MFX_FOURCC_Y410 in gst_msdk_video_memory_map_full
were wrong too before this fix.
When the bitrate is changed in playing state the encoder issues a reconfig
that drains and recreates the underlaying hw encoder instance.
With this set of changes we ensure that all this work is only made when
the bitrate did actually change. It also tries to reuse the vpp buffer
pool and fixes the pool leak spotted when testing this feature.
When postpone_free_surface is TRUE, the output buffer is not writable,
however the base decoder needs a writable buffer as output buffer,
otherwise it will make a copy of the output buffer. As the underlying
memory is always lockable, so we may set the LOCKABLE flag for this buffer
to avoid buffer copy in the base class.
The refcount of the output buffer is 1 when postpone_free_surface is
FALSE, so needn't set the LOCKABLE flag for this case.
Both MSDK and this plugin use mfxFrameAllocResponse for video and DMABuf
memory, it is possible that some GST buffers are still in use when calling
gst_msdk_frame_free, so add a reference count in the wrapper of
mfxFrameAllocResponse (GstMsdkAllocResponse) to make sure the underlying
mfx resources are still available if the corresponding buffer pool is in
use.
In addtion, currently all allocators for input or output share the same
mfxFrameAllocResponse pointer in an element, so it is possible that
the content of mfxFrameAllocResponse is updated for a new caps then all
GST buffers allocated from an old allocator will use this new content of
mfxFrameAllocResponse, which will result in unexpected behavior. In this
fix, we save the the content of mfxFrameAllocResponse in the corresponding
tructure to avoid such issue
Sample pipeline:
gst-launch-1.0 filesrc location=vp9_multi_resolutions.ivf ! ivfparse ! msdkvp9dec !
msdkvpp ! video/x-raw\(memory:DMABuf\),format=NV12 ! glimagesink
Otherwise it is possible that different wrappers share the same
mfxFrameAllocResponse pointer, so instead of caching the pointer, we may
cache the content of mfxFrameAllocResponse
For a skipped frame in VC1, MSDK returns the mfx surface of the reference
frame, so we have to make sure the corresponding surface for the
reference frame is not freed. In this fix, we postpone surface free because
we don't know whether a surface is referenced
Before this fix, the error is like as below:
New clock: GstSystemClock
0:00:00.181793130 23098 0x55f8a9d622d0 ERROR msdkdec
gstmsdkdec.c:622:gst_msdkdec_finish_task:<msdkvc1dec0> Couldn't find the
cached MSDK surface
Sample pipeline:
gst-launch-1.0 filesrc location=input_has_skipped_frame.wmv ! asfdemux !
vc1parse ! msdkvc1dec ! glimagesink
If the surface is not in use, we may release it even if GST_FLOW_OK is going
to be returned, which may avoid the issue of failing to get surface
available
This fixes the regression caused by commit c05acf4
GstAllocationParams::align is set to 31 in msdkdec/msdken/msdkvpp, hence
the stride align should be greater than or equal to 31, otherwise it
will result in issue
https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/issues/861
(msdk: "GStreamer-CRITICAL: gst_buffer_resize_range failed" SPAM),
In addition, the stride should match the pitch alignment in the media driver,
otherwise it will result in some issues when a buffer is shared between
different elements, e.g. the NV12 issue mentioned in commit 3f2314a, which
can be reproduced by `gst-launch-1.0 vidoetestsrc ! msdkvpp !
video/x-raw\(memory:DMABuf\),format=NV12 ! glimagesink`
Fixed https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/issues/861
