This allows to get rid of the sampling_rate variable in the base-class. Also now
subclasses can modify the caps to actualy negotiate. This is needed to e.g. set
audio-channel positions.
This makes sure that the headers from the source tree are taken and not
accidentially installed system headers in the case of builddir!=srcdir.
Fixes bug #602161.
Revert the changes that added audio positions to template caps. We have an un-
fortunate limitation in core that does not allow to do it. Keep a few things
commented out, so that the channel position can later on be set in setcaps.
This queries port roles from the LV2 data and converts it into GStreamer
channel positions. This should allow any type of multi-channel plugin
(including beyond stereo, e.g. surround) to work fine in GStreamer,
and with elements that require channel positions to be explicitly stated.
Install the headers, version the library with @GST_MAJORMINOR@,
add all required libraries to _LIBADD instead of _LDFLAGS,
and add GST_*_LDFLAGS to _LDFLAGS.
Fixes bug #594715.
- Separate gstsignalprocessor into a separate library (not sure if this
is in the right place, but it works for now anyway)
- Create LV2 element based on LADSPA element, port most discovery
functionality
Use glib defines for searchpath separators. Filter searchpath to avoid scanning
path entries twice. Fix the return in ladspa_plugin_directory_search to return
wheter we found a plugin.
Move the two function from search.c into gstladspa.c and make them static.
Remove non needed arguments from function prototypes. Use glib api for
simplicity and portability.
Original commit message from CVS:
Based on Patch by: Brian Cameron <brian dot cameron at sun dot com>
* ext/ladspa/search.c: (LADSPAPluginSearch):
Avoid searching (null) paths or crashing on platforms where printing a
NULL string segfaults. Fixes#567004.
Original commit message from CVS:
* ext/ladspa/gstladspa.c:
Whitespace.
* ext/ladspa/gstsignalprocessor.c:
Add a FIXME:. not sure if this code does the forwarding correctly.
Original commit message from CVS:
* configure.ac:
* ext/ladspa/Makefile.am:
Link the ladspa plugin with -ldl. It's needed for dlopen() and friends
for loading the ladspa plugins and previously was linked in by
gmodule. Fixes bug #543848.
Original commit message from CVS:
* ext/ladspa/gstladspa.c: (gst_ladspa_base_init),
(gst_ladspa_class_init), (ladspa_describe_plugin), (plugin_init):
Don't use GST_BOILERPLATE as the stuff generated from it is not used
anyway and can't be used.
Store the class struct of the correct type in parent_class.
Pass the LADSPA_Descriptor as class_data to the class_init function
as preparation for the time, when we can add pad templates and friends
in class_init and add a FIXME for that.
Don't use a custom hash table for passing the LADSPA_Descriptors to
base_init but use g_type_set_qdata and g_type_get_qdata.
Original commit message from CVS:
* ext/ladspa/gstsignalprocessor.c:
(gst_signal_processor_class_add_pad_template):
Don't unref the pad template after adding it.
gst_element_class_add_pad_template takes ownership of it.
Original commit message from CVS:
* ext/ladspa/gstladspa.c: (gst_ladspa_get_property):
* ext/sdl/sdlvideosink.c: (gst_sdlvideosink_show_frame):
* gst/mve/gstmvemux.c: (gst_mve_mux_request_new_pad):
* sys/dvb/dvbbasebin.c: (dvb_base_bin_class_init):
Fix 'xyz may be used uninitialized' compiler warnings caused
by broken g_assert_not_reached() macro in GLib-2.15.x and don't
abort() in any case but properly report the error.
Original commit message from CVS:
* ext/ladspa/Makefile.am:
* ext/ladspa/gstladspa.c: (gst_ladspa_class_get_param_spec):
add GstController support to ladspa
Original commit message from CVS:
2007-01-12 Andy Wingo <wingo@pobox.com>
* ext/ladspa/gstsignalprocessor.c (gst_signal_processor_fixate)
(gst_signal_processor_ouija_caps, gst_signal_processor_prepare):
Remove fixate/ouija stuff, thankfully, due to the new
part-negotiation.txt pull-mode negotiation scheme.
(gst_signal_processor_setcaps_pull)
(gst_signal_processor_setcaps): Implement upstream set_caps pull
proxying for pull mode. Now this works: ladspa-sine-fcac !
audioconvert ! alsasink.
Original commit message from CVS:
2007-01-06 Andy Wingo <wingo@pobox.com>
* ext/ladspa/gstsignalprocessor.c
(gst_signal_processor_ouija_caps): Move around in the source
file...
(gst_signal_processor_prepare, gst_signal_processor_do_pulls):
Call ouija_caps in prepare() instead of do_pulls(), a bit earlier.
This allows us to have caps when we do the pad_alloc_buffer().
(gst_pad_alloc_buffer_and_set_caps): Use self->caps instead of the
pad caps, which might not be set yet.
Original commit message from CVS:
2007-01-06 Andy Wingo <wingo@pobox.com>
* ext/ladspa/gstsignalprocessor.c:
(gst_signal_processor_add_pad_from_template)
(gst_signal_processor_fixate): Add a fixate function, to assist in
pathological ladspa-sine-fcac ! fakesink can-activate-pull=true
cases.
(gst_signal_processor_prepare, gst_signal_processor_process): Add
nframes args so that getrange can tell ladspa how many frames to
process.
(gst_signal_processor_ouija_caps): setcaps needs to be called
before processing, which normally happens when chaining a buffer
to a pad. However in getrange mode with no sinks we need to check
explicitly for this condition, guess some caps to use, and use
those to setcaps(). Hence this mystical function.
(gst_signal_processor_do_pulls): Pull in bytes, not samples.
Divine the caps if necessary.
(gst_signal_processor_getrange): Interpret the length as bytes,
not samples.
(gst_signal_processor_chain): nframes=G_MAXUINT, will be limited
by incoming buffer sizes.
Original commit message from CVS:
* ext/ladspa/gstsignalprocessor.c: (gst_signal_processor_setcaps),
(gst_signal_processor_event):
Reset flow_state back to _OK after a flush stop so that we exit our
error state after the flush. Fixes#374213
Original commit message from CVS:
* ext/ladspa/gstladspa.c: (gst_ladspa_base_init):
Convert ' ' into '_'. Try to keep as many characters in the padtemplate
names as possible.
Original commit message from CVS:
* ext/ladspa/gstsignalprocessor.c: (gst_signal_processor_flush),
(gst_signal_processor_do_pushes):
A push() gives away our refcount so we should not use the buffer on the
pen anymore.
Original commit message from CVS:
2006-08-04 Andy Wingo <wingo@pobox.com>
* ext/ladspa/gstsignalprocessor.h: Add infrastructure for storing
whether a processor can work in place or not, and for keeping
track of its state. Change the FlowReturn instance variable from
"state" to "flow_state", all callers changed.
* ext/ladspa/gstsignalprocessor.c (gst_signal_processor_setup)
(gst_signal_processor_start, gst_signal_processor_stop)
(gst_signal_processor_cleanup): New functions to manage the
processor's state.
(gst_signal_processor_setcaps): start() as well as setup() here.
(gst_signal_processor_prepare): Respect CAN_PROCESS_IN_PLACE.
(gst_signal_processor_change_state): Stop and cleanup the
processor as we go to NULL.
* ext/ladspa/gstladspa.c (gst_ladspa_base_init): Reuse buffers if
INPLACE_BROKEN is not set.
* ext/ladspa/gstsignalprocessor.c (gst_signal_processor_prepare):
Do the alloc_buffer in bytes, not frames.
Original commit message from CVS:
2006-08-04 Andy Wingo <wingo@pobox.com>
* ext/ladspa/gstsignalprocessor.c (gst_signal_processor_setcaps)
(gst_signal_processor_prepare)
(gst_signal_processor_update_inputs)
(gst_signal_processor_process, gst_signal_processor_pen_buffer)
(gst_signal_processor_flush)
(gst_signal_processor_sink_activate_push)
(gst_signal_processor_src_activate_pull)
(gst_signal_processor_change_state): Remove the last of the code
that assumes that we process whole buffers at a time. Fix some
debugging. Seems to work now in some cases.
Original commit message from CVS:
2006-08-01 Andy Wingo <wingo@pobox.com>
* ext/ladspa/gstsignalprocessor.c (gst_signal_processor_process):
Fix nframes-choosing.
(gst_signal_processor_init): Init pending_in and pending_out.
Original commit message from CVS:
2006-08-01 Andy Wingo <wingo@pobox.com>
* ext/ladspa/gstsignalprocessor.c (gst_signal_processor_init): No
more default sample rate, although we never check that the sample
rate actually gets set. Something for the future.
(gst_signal_processor_setcaps): Some refcount fixes, flow fixes.
(gst_signal_processor_event): Refcount fixen.
(gst_signal_processor_process): Pull the number of frames to
process from the sizes of the buffers in the input pens.
(gst_signal_processor_pen_buffer): Remove an incorrect FIXME :)
(gst_signal_processor_do_pulls): Add an nframes argument, and use
it instead of buffer_frames.
(gst_signal_processor_getrange): Refcount fixen, pass nframes on
to do_pulls.
(gst_signal_processor_chain)
(gst_signal_processor_sink_activate_push)
(gst_signal_processor_src_activate_pull): Refcount fixen.
* ext/ladspa/gstsignalprocessor.h: No more buffer_frames, yay.
Original commit message from CVS:
* ext/ladspa/gstsignalprocessor.c: (gst_signal_processor_setcaps),
(gst_signal_processor_process):
don't query buffer-frames from caps, add lots of debug-log,
try fix for assert (#349189)
