-add delsys property
-add delivery system capability to the gstreamer adapter structure
-ready for add new delivery systems
Application must ask the adapter structure to know which delivery systems are avaible.
The property delsys must be set.
https://bugzilla.gnome.org/show_bug.cgi?id=709414
Which causes problems when used with _GNU_SOURCE apparently, and it
seems it was only set because of usleep(), which we can just replace
with g_usleep() until we get rid of those entirely.
https://bugzilla.gnome.org/show_bug.cgi?id=705208
Original code to parse satellite delivery descriptors to generate
"satellite" structures appeared to be copy & pasted from cable's code
without amending for satellite.
Also added 8PSK to dvbsrc's enum for modulation.
https://bugzilla.gnome.org/show_bug.cgi?id=654485
Conflicts:
gst/mpegdemux/gstmpegdesc.h
gst/mpegdemux/mpegtspacketizer.c
Make the _read_device function return a GstFlowReturn so that we can propagate
this to the caller. This allows us to differentiate between poll errors and
flushing state.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=674219
This allows to use much higher timeout values because GstPoll
is interruptible and keeps the number of wakeups during signal
loss lower.
Fixes bug #608171.
fixes the following compile errors:
cc1: warnings being treated as errors
camswclient.c: In function 'cam_sw_client_open':
camswclient.c:81: warning: implicit declaration of function 'strncpy'
camswclient.c:81: warning: incompatible implicit declaration of built-in function 'strncpy'
camswclient.c:89: warning: implicit declaration of function 'strerror'
camswclient.c:89: warning: nested extern declaration of 'strerror'
camswclient.c:89: warning: format '%s' expects type 'char *', but argument 9 has type 'int'
camswclient.c: In function 'send_ca_pmt':
camswclient.c:129: warning: implicit declaration of function 'memcpy'
camswclient.c:129: warning: incompatible implicit declaration of built-in
function 'memcpy'
gstdvbsrc.c:48:19: error: error.h: No such file or directory
Signed-off-by: Rob Clark <rob@ti.com>
Some devices take a while to tune and 500ms was too short to detect
successful tuning. As well as waiting for 5 seconds each 100ms the
status is checked and the loop is broken out of when tuning has suceeded.
Original commit message from CVS:
Patch by: Frederic Crozat <fcrozat@mandriva.org>
* ext/sndfile/gstsf.c: (plugin_init):
* sys/dvb/gstdvbsrc.c: (gst_dvbsrc_plugin_init):
* sys/oss4/oss4-audio.c: (plugin_init):
Make sure gettext returns translations in UTF-8 encoding rather
than in the current locale encoding (#546822).
Original commit message from CVS:
* sys/dvb/gstdvbsrc.c:
* sys/dvb/parsechannels.c:
Add DVB-C support. Special thanks to Christian Schaller
for a testing ground.
Original commit message from CVS:
* sys/dvb/gstdvbsrc.c:
Add initial support for multiproto driver (not yet merged into
v4l-dvb mainline yet).
Only works for DVB-S not DVB-S2, DVB-T, DVB-C or other.
Original commit message from CVS:
* sys/dvb/gstdvbsrc.c:
Post bus message about adapter type and it's capabilities,
when opening the frontend.
After failing to read from the dvr, post a bus message to
inform the app.
Original commit message from CVS:
* sys/dvb/gstdvbsrc.c:
Do not go on forever if problem with reading from dvr, rather
return NULL.
Handle some cleanup issues of closing filedescriptors when
failing to tune or similar.
Original commit message from CVS:
* sys/dvb/gstdvbsrc.c:
Actually use the code-rate-hp parameter for DVB-S.
It turns out setting to AUTO does not always work (
especially in diseq situations). Set by default to
FEC_AUTO.
Original commit message from CVS:
patch by: Alessandro Decina
* sys/dvb/Makefile.am:
* sys/dvb/cam.c:
* sys/dvb/cam.h:
* sys/dvb/camapplication.c:
* sys/dvb/camapplication.h:
* sys/dvb/camapplicationinfo.c:
* sys/dvb/camapplicationinfo.h:
* sys/dvb/camconditionalaccess.c:
* sys/dvb/camconditionalaccess.h:
* sys/dvb/camdevice.c:
* sys/dvb/camdevice.h:
* sys/dvb/camresourcemanager.c:
* sys/dvb/camresourcemanager.h:
* sys/dvb/camsession.c:
* sys/dvb/camsession.h:
* sys/dvb/camswclient.c:
* sys/dvb/camswclient.h:
* sys/dvb/camtransport.c:
* sys/dvb/camtransport.h:
* sys/dvb/camutils.c:
* sys/dvb/camutils.h:
* sys/dvb/dvbbasebin.c:
* sys/dvb/dvbbasebin.h:
* sys/dvb/gstdvb.c:
* sys/dvb/gstdvbsrc.c:
* sys/dvb/gstdvbsrc.h:
Integrate SoC work done by Alessandro for the Freevo project.
Adds cam support to the dvb stack in GStreamer and a new
element (actually a bin) called dvbbasebin that integrates
dvbsrc and mpegtsparse to a) handle decryption and b) allow
acquiring multiple channels on same transponder without
knowing pid numbers.
Original commit message from CVS:
2006-11-17 Zaheer Abbas Merali <zaheerabbas at merali dot org>
* sys/dvb/gstdvbsrc.c: (gst_dvbsrc_tune):
Actually set the TONE parameter for DVB-S when we should.
Original commit message from CVS:
2006-11-09 Zaheer Abbas Merali <zaheerabbas at merali dot org>
* sys/dvb/gstdvbsrc.c: (gst_dvbsrc_set_property)
(gst_dvbsrc_create), (gst_dvbsrc_output_frontend_stats),
(gst_dvbsrc_tune), (gst_dvbsrc_set_pes_filters):
Rename set_pes_filter to set_pes_filters for consistency.
Do run-time pid filtering.
Original commit message from CVS:
2006-11-08 Zaheer Abbas Merali <zaheerabbas at merali dot org>
* sys/dvb/gstdvbsrc.c: (read_device):
Do not call output_frontend_stats from a method that does not
have the gstdvbsrc object.
This fixes the build, sorry guys!
Original commit message from CVS:
2006-11-07 Zaheer Abbas Merali <zaheerabbas at merali dot org>
* sys/dvb/gstdvbsrc.c: (read_device), (gst_dvbsrc_create),
(gst_dvbsrc_output_frontend_stats), (gst_dvbsrc_tune),
(gst_dvbsrc_set_pes_filter):
* sys/dvb/gstdvbsrc.h:
Force PAT to always be in the filter.
Try to continue reading after failing 10 times.
Original commit message from CVS:
* po/POTFILES.in:
add dvbsrc
* sys/dvb/gstdvbsrc.c: (gst_dvbsrc_class_init), (gst_dvbsrc_init),
(gst_dvbsrc_set_property), (gst_dvbsrc_get_property),
(gst_dvbsrc_open_frontend), (gst_dvbsrc_open_dvr),
(gst_dvbsrc_finalize), (read_device), (gst_dvbsrc_create),
(gst_dvbsrc_start), (gst_dvbsrc_frontend_status),
(gst_dvbsrc_tune), (gst_dvbsrc_unset_pes_filters),
(gst_dvbsrc_set_pes_filter):
* sys/dvb/gstdvbsrc.h:
adapter-prefix is a terrible name for a device, so replace it.
strerror should be used immediately after the syscall related to it.
Actually throw a reasonable GST_ELEMENT_ERROR if we fail to open
(pretty easy to trigger by opening the same device twice).
Use _OBJECT macros where it makes sense.
This element is going to need some work before it moves.
Original commit message from CVS:
* gst/qtdemux/qtdemux.c: (extract_initial_length_and_fourcc),
(gst_qtdemux_loop_state_header):
Printf format fixes.
* sys/dvb/gstdvbsrc.c:
Use "_stdint.h".
Original commit message from CVS:
2006-10-10 Zaheer Abbas Merali <zaheerabbas at merali dot org>
* sys/dvb/Makefile.am:
* sys/dvb/dvb-api/Makefile.am:
* sys/dvb/dvb-api/audio.h:
* sys/dvb/dvb-api/ca.h:
* sys/dvb/dvb-api/dmx.h:
* sys/dvb/dvb-api/frontend.h:
* sys/dvb/dvb-api/net.h:
* sys/dvb/dvb-api/osd.h:
* sys/dvb/dvb-api/version.h:
* sys/dvb/dvb-api/video.h:
Remove these files, not needed use system files.
* sys/dvb/gstdvbsrc.c: (gst_dvbsrc_set_property),
(gst_dvbsrc_create), (gst_dvbsrc_output_frontend_stats),
(gst_dvbsrc_tune):
Fix warnings, uint16_t etc. is in stdint.h.
Use system includes not our local ones.
