There is no difference in VAAPI surface caps between encoders and decoders.
Thus, the patch makes a simplification by removing encoders specific caps and
shares the same definition of VAAPI surfaces caps for all the elements.
Trying to comply with GStreamer's element names, this patch renames the
encoders using the name format vaapi{codec}enc.
In this way, the plugin documentation is linked correctly.
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
Refactor the main vaapi caps strings into three macros:
GST_VAAPI_MAKE_SURFACE_CAPS, GST_VAAPI_MAKE_ENC_SURFACE_CAPS and
GST_VAAPI_MAKE_GLTEXUPLOAD_CAPS.
Those are in gstvaapipluginutil.h so all the elements could use them, instead
of re-declaring them every time.
No functional changes.
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
The support for GStreamer 1.0 has been obsoleted in 0.5.10 release.
GStreamer 1.2 is the a minimal requirement for building the gstreamer-vaapi.
This patch removes all the pre-processor conditional code compilation guarded
for gstreamer-1.0.
Thus, all the video converters were removed too.
https://bugzilla.gnome.org/show_bug.cgi?id=745728
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Signed-off-by: Sreerenj Balachandran <sreerenj.balachandran@intel.com>
The purpose of gstcompat.h is to couple the API differences among
gstreamer-1.0 and gstreamer-0.10. Since gstreamer-0.10 is obsolete, the code
in this compatibility layer shall be removed.
Nevertheless, the gstcompat.h header should be kept, if new incompatibilites
appear in the future, but it shall live in gst/vaapi, not in gst-libs.
This patch removes the crumbs defined gstcompat.h and moves it to gst/vaapi.
In order to avoid layer violations, gstcompat.h includes sysdeps.h and all
the includes in gst/vaapi of sysdeps.h are replaced with gstcompat.h
https://bugzilla.gnome.org/show_bug.cgi?id=745728
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Signed-off-by: Sreerenj Balachandran <sreerenj.balachandran@intel.com>
Attach the codec_data to out_caps only if downstream needed.
For eg: h264 encoder doesn't need to stuff codec_data to the
src caps if the negotiated caps has a stream format of byte-stream.
https://bugzilla.gnome.org/show_bug.cgi?id=734902
Add initial support for Subset SPS, Prefix NAL and Slice Extension NAL
for non-base-view streams encoding, and the usual SPS, PPS and Slice
NALs for base-view encoding.
The H.264 Stereo High profile encoding mode will be turned on when the
"num-views" parameter is set to 2. The source (raw) YUV frames will be
considered as Left/Right view, alternatively.
Each of the two views has its own frames reordering pool and reference
frames list management system. Inter-view references are not supported
yet, so the views are encoded independently from each other.
Signed-off-by: Li Xiaowei <xiaowei.a.li@intel.com>
[limited to Stereo High profile per the definition of MAX_NUM_VIEWS]
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Allow user to precise the largest profile to use for encoding due
to target decoder constraints. For instance, if CABAC entropy coding
mode is requested by "constrained-baseline" profile only is desired,
then an error is returned during codec configuration.
Also make sure that the suitable profile we derived actually matches
what the HW can cope with.
https://bugzilla.gnome.org/show_bug.cgi?id=719694
Various clean-ups to improve consistency and readability: rename some
variables, drop unused macro definitions, drop initialization of vars
that are zero-initialized from the base class, drop un-necessary casts.
The specified caps in gst_video_encoder_set_output_state() function
arguments should not contain any resolution, pixel-aspect-ratio,
framerate, codec-data et al. Those rather should be set through the
returned GstVideoCodecState. This means that output caps creation
could be delayed until before gst_video_encoder_finish_frame() is
called.
This greatly simplifies the GstVideoEncoder::set_format() callback
by the way.
Rename a few member functions to make them more consistent:
- alloc_encoder(): now reduced to allocate the encoder object only;
- alloc_buffer(): allocate buffer from srcpad, and copy bitstream.
Update MPEG-2 and H.264 encode elements to cope with the new core
libgstvaapi properties API. i.e. all configurable properties are now
directly handled at the GstVaapiEncoder level.
Besides, this also makes sure to not use or modify the GstVaapiEncoder
private definitions directly. Private data need to remain private.
https://bugzilla.gnome.org/show_bug.cgi?id=719529
Add gst_vaapi_encoder_set_bitrate() interface to allow the user control
the bitrate for encoding. Currently, changing this parameter is only
valid before the first frame is encoded. Should the value be modified
afterwards, then GST_VAAPI_ENCODER_STATUS_ERROR_OPERATION_FAILED is
returned.
https://bugzilla.gnome.org/show_bug.cgi?id=719529
Add gst_vaapi_encoder_set_rate_control() interface to request a new
rate control mode for encoding. Changing the rate control mode is
only valid prior to encoding the very first frame. Afterwards, an
error ("operation-failed") is issued.
https://bugzilla.gnome.org/show_bug.cgi?id=719529
Constify pointers wherever possible. Drop unused variables, and use
consistent variable names. Fix gst_vaapiencode_h264_allocate_buffer()
to correctly report errors, especially when in-place conversion from
bytestream to avcC format failed.
Move "rate-control" mode and "bitrate" properties to the GstVaapiEncode
base class. The actual range of supported rate control modes is currently
implemented as a plug-in element hook. This ought to be determined from
the GstVaapiEncoder object instead, i.e. from libgstvaapi.
Align the plug-in debug category to its actual name. i.e. enable debug
logs through vaapiencode_<CODEC> where <CODEC> is mpeg2, h264, etc. Fix
the plug-in element description to make it more consistent with other
VA-API plug-ins.
Add a GST_VAAPIENCODE_CAST() helper to avoid run-time checks against
the GObject type system. We are guaranteed to only deal with the same
plug-in element object.
Allow vaapiencode plug-in elements to encode from raw YUV buffers.
The most efficient way to do so is to let the vaapiencode elements
allocate a buffer pool, and subsequently buffers from it. This means
that upstream elements are expected to honour downstream pools.
If upstream elements insist on providing their own allocated buffers
to the vaapiencode elements, then it possibly would be more efficient
to insert a vaapipostproc element before the vaapiencode element.
This is because vaapipostproc currently has better support than other
elements for "foreign" raw YUV buffers.
Add GstVaapiEncodeH264 element object. The actual plug-in element
is called "vaapiencode_h264".
Valid properties:
- rate-control: rate control mode (default: none)
- bitrate: desired bitrate in kbps (default: auto-calculated)
- key-period: maximal distance between two key frames (default: 30)
- num-slices: number of slices per frame (default: 1)
- max-bframes: number of B-frames between I and P (default: 0)
- min-qp: minimal quantizer (default: 1)
- init-qp: initial quantizer (default: 26)
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
