Original commit message from CVS:
* gst/wavparse/gstwavparse.c: (gst_wavparse_perform_eos),
(gst_wavparse_loop), (gst_wavparse_chain):
Add EOS logic for the push-based mode too. Fixes#476514.
Original commit message from CVS:
* gst/wavparse/gstwavparse.c:
* gst/wavparse/gstwavparse.h:
Implement seek-query. Refactor duration calculations. Appropriate use
of uint64_scale_int and uint64_scale. Move repeadedly calculated stuff
out of loops.
Original commit message from CVS:
* gst/wavparse/gstwavparse.c: (gst_wavparse_stream_headers):
Skip LIST chunks before the fmt chunk (fixes#437499). Also fix
streaming mode regression for file from #343837 with 'bext' chunk
before the 'fmt' chunk.
Original commit message from CVS:
* gst/wavparse/gstwavparse.c: (gst_wavparse_perform_seek),
(gst_wavparse_stream_headers), (gst_wavparse_stream_data):
Only set DISCONT when there actually is a discont or when we just
started.
Original commit message from CVS:
* gst/wavparse/gstwavparse.c: (gst_wavparse_perform_seek),
(gst_wavparse_stream_headers), (gst_wavparse_add_src_pad),
(gst_wavparse_stream_data):
* gst/wavparse/gstwavparse.h:
Be a bit more clever when dealing with VBR files with FACT tags, we
don't want to timestamp buffers in that case but the estimated BPS can
be used for seeking.
Only send close segment in the streaming thread.
Original commit message from CVS:
* gst/wavparse/gstwavparse.c: (gst_wavparse_perform_seek),
(gst_wavparse_stream_headers), (gst_wavparse_stream_data):
* gst/wavparse/gstwavparse.h:
Apply DISCONT to buffers.
Only apply timestamp to the first sample after a DISCONT, too many VBR
files cause random jitter in the timestamps. Fixes#433119.
Original commit message from CVS:
Patch by: Vincent Torri <vtorri at univ-evry dot fr>
* gst/wavparse/gstwavparse.c: (gst_wavparse_stream_headers):
Use correct format strings for integer types.
Original commit message from CVS:
* gst/wavparse/gstwavparse.c: (gst_wavparse_base_init),
(gst_wavparse_create_sourcepad):
Use gst_riff_create_audio_template_caps () instead of the local caps.
This makes updates of the local caps unecessary whenever libgstriff
gets support for new formats.
Original commit message from CVS:
* gst/wavparse/gstwavparse.c: (uint64_ceiling_scale_int),
(gst_wavparse_perform_seek), (gst_wavparse_stream_headers),
(gst_wavparse_stream_data):
Relax the audio/mpeg caps again and add FIXME: comment.
Original commit message from CVS:
* gst/wavparse/gstwavparse.c: (uint64_ceiling_scale_int),
(gst_wavparse_perform_seek), (gst_wavparse_stream_headers),
(gst_wavparse_stream_data):
* gst/wavparse/gstwavparse.h:
More sanity check for the header fields. Fix type for 'rate' header
field.
Original commit message from CVS:
* gst/auparse/gstauparse.c: (gst_au_parse_parse_header):
limit caps to the formats we announce in the template
* gst/wavparse/gstwavparse.c: (uint64_ceiling_scale_int),
(gst_wavparse_perform_seek), (gst_wavparse_stream_headers),
(gst_wavparse_add_src_pad), (gst_wavparse_stream_data):
fix some crashers/asserts when dealing with broken files
Original commit message from CVS:
* gst/wavparse/gstwavparse.c:
Support audio/x-raw-float in wav files. This only works with
plugins-base CVS, using an older version doesn't have any
disadvantages though.
Original commit message from CVS:
* gst/wavenc/gstwavenc.c: (gst_wavenc_create_header_buf),
(gst_wavenc_sink_setcaps):
Correctly handle width!=depth input.
* gst/wavparse/gstwavparse.c:
Already export in the caps that width==8 uses unsigned samples and
everything else uses signed samples.
Original commit message from CVS:
* gst/wavparse/gstwavparse.c:
Add support for wav files containing audio/x-raw-int with random
depths between 1 and 32 bits.
Original commit message from CVS:
* gst/wavparse/gstwavparse.c: (gst_wavparse_stream_headers):
Streaming mode fixes: don't unref buffer we don't own any longer;
remove bogus adapter flush. Fixes#419338.
Original commit message from CVS:
Patch by: René Stadler <mail@renestadler.de>
* gst/wavparse/gstwavparse.c: (uint64_ceiling_scale_int),
(gst_wavparse_perform_seek), (gst_wavparse_stream_headers),
(gst_wavparse_stream_data):
Handle rounding better to not drop last sample frame. Fixes#356692
Original commit message from CVS:
* gst/wavparse/gstwavparse.c: (gst_wavparse_class_init),
(gst_wavparse_reset), (gst_wavparse_init),
(gst_wavparse_destroy_sourcepad), (gst_wavparse_fmt),
(gst_wavparse_parse_file_header), (gst_wavparse_stream_init),
(gst_wavparse_perform_seek), (gst_wavparse_peek_chunk_info),
(gst_wavparse_stream_headers), (gst_wavparse_parse_stream_init),
(gst_wavparse_add_src_pad), (gst_wavparse_stream_data),
(gst_wavparse_loop), (gst_wavparse_chain),
(gst_wavparse_pad_convert), (gst_wavparse_pad_query),
(gst_wavparse_srcpad_event), (gst_wavparse_change_state),
(plugin_init):
* gst/wavparse/gstwavparse.h:
Update docs.
Use boilerplate.
Various code cleanups.
When the bitrate is not known (bps == 0 or compressed formats) let
downstream element guestimate the duration and position and don't
generate timestamps or durations. Fixes#405213.
Fix EOS and ERROR conditions in chain mode, we just need to forward the
error flowreturn upstream.
Original commit message from CVS:
Based on patch by: Jonathan Matthew <jonathan at kaolin wh9 net>
* gst/wavparse/gstwavparse.c: (gst_wavparse_parse_stream_init),
(gst_wavparse_stream_data):
Fix massive memory leak when operating in streaming mode due to
GST_BUFFER_MALLOCDATA() not being set on newly-created buffers.
Fixes#407057.
Original commit message from CVS:
* gst/id3demux/id3v2frames.c: (parse_picture_frame):
We require a -base more recent than 0.10.9, so it's safe to use
GST_TYPE_TAG_IMAGE_TYPE unconditionally now.
* ext/dv/gstdvdec.c: (gst_dvdec_sink_event):
* ext/jpeg/gstjpegdec.c: (gst_jpeg_dec_sink_event):
Use _newsegment_full() now that we depend on a recent enough core.
* gst/wavparse/gstwavparse.c:
Remove cruft that we don't need any longer now that we depend on
a recent enough -base.
Original commit message from CVS:
* gst/wavparse/gstwavparse.c: (gst_wavparse_perform_seek),
(gst_wavparse_stream_data):
Fix seeking some more, mostly for speed changes.
Original commit message from CVS:
Patch by: Edward Hervey <edward@fluendo.com>
* configure.ac:
* gst/wavparse/gstwavparse.c: (gst_wavparse_perform_seek),
(gst_wavparse_stream_data):
Send the newsegment event in the streaming thread.
Fixes#347529
Original commit message from CVS:
* gst/wavparse/gstwavparse.c:
#define 'fact' RIFF chunk if we are not compiling against
-base CVS (we don't want to depend on -base CVS for this
one define only, and also not for release order reasons).
Original commit message from CVS:
* gst/wavparse/gstwavparse.c: (gst_wavparse_reset),
(gst_wavparse_other), (gst_wavparse_perform_seek),
(gst_wavparse_get_upstream_size), (gst_wavparse_stream_headers),
(gst_wavparse_add_src_pad), (gst_wavparse_stream_data),
(gst_wavparse_pad_query):
* gst/wavparse/gstwavparse.h:
Use information from 'fact' chunk for length calculation of compressed
samples. Calculate bps if bogus value is found in wav header (embeded
mp2/mp3).
Original commit message from CVS:
Patch by: Mark Nauwelaerts <manauw at skynet be>
* gst/wavparse/gstwavparse.c: (gst_wavparse_perform_seek):
Make sure we don't read beyond the end of the file (#345232).
Original commit message from CVS:
* gst/wavparse/gstwavparse.c: (gst_wavparse_peek_chunk_info),
(gst_wavparse_peek_chunk), (gst_wavparse_stream_headers),
(gst_wavparse_chain):
When operating chain-based, don't make any assumptions about the
chunking of the incoming data and make streaming work on days other
than the second Thursday after a full moon. Also fix up debug
messages here and there and make use of the most excellent new
gst_pad_query_peer_duration() utility function.
Skip any 'bext' chunks in front of the 'fmt ' chunk. Fixes#343837.
* gst/wavparse/gstwavparse.h:
Remove trailing comma after last enum value, some compilers don't
like that.
Original commit message from CVS:
* gst/wavparse/gstwavparse.c: (gst_wavparse_fmt),
(gst_wavparse_perform_seek), (gst_wavparse_stream_headers):
Fix use of uninitialised values if we're NOT seeking in ready.
Fix typos.
Original commit message from CVS:
* ext\jpeg\smokecodec.c:
use of GST_DEBUG instead of DEBUG(a...) for WIN32
* ext\speex\gstspeexenc.c: (gst_speexenc_set_header_on_caps):
move first instruction after all variables declarations
* gst\alpha\gstalpha.c:
* gst\effectv\gstshagadelic.c:
* gst\smpte\paint.c:
* gst\videofilter\gstvideobalance.c:
define M_PI if it's not defined (it's not defined on WIN32)
* gst\cutter\gstcutter.c: (gst_cutter_chain):
* gst\id3demux\id3v2frames.c: (parse_relative_volume_adjustment_two):
* gst\level\gstlevel.c: (gst_level_set_property), (gst_level_transform_ip):
* gst\matroska\matroska-demux.c: (gst_matroska_demux_parse_info),
(gst_matroska_demux_video_caps):
* gst\matroska\matroska-mux.c: (gst_matroska_mux_start), (gst_matroska_mux_finish):
* gst\wavparse\gstwavparse.c: (gst_wavparse_stream_data):
use gst_guint64_to_gdouble for conversions
* gst\goom\filters.c: (setPixelRGB_):
fix a debug which was using undefined variable
* gst\level\gstlevel.c: (gst_level_set_caps), (gst_level_transform_ip):
* gst\matroska\ebml-read.c: (gst_ebml_read_sint):
replace LL suffix with L suffix (LL isn't supported by MSVC6.0)
* win32/vs6:
add vs6 projects files for most of plugins-good
Original commit message from CVS:
* gst/wavparse/gstwavparse.c: (gst_wavparse_get_upstream_size),
(gst_wavparse_stream_headers), (gst_wavparse_stream_data):
Don't try to read beyond the end of the file just because
the header claims a bigger size (like with truncated files).
Original commit message from CVS:
* gst/wavparse/gstwavparse.c: (gst_wavparse_perform_seek),
(gst_wavparse_stream_headers), (gst_wavparse_add_src_pad),
(gst_wavparse_stream_data), (gst_wavparse_loop):
* gst/wavparse/gstwavparse.h:
Delay source pad creation until we have the first chunk of
media data, so the we can examine the data and adjust the
caps accordingly if required. This makes playback of .wav
files with DTS-declared-as-PCM content work (#313266).
Original commit message from CVS:
Patch by: Tommi Myöhänen <ext-tommi dot myohanen at nokia dot com>
* gst/wavparse/gstwavparse.c: (gst_wavparse_perform_seek):
Fix block alignment calculation. Alignment should be done before
adding the byte offset where the data starts (#335231).
Original commit message from CVS:
* gst/wavparse/gstwavparse.c: (gst_wavparse_reset),
(gst_wavparse_change_state):
Implement seek in READY (re-fixes #327658)
Original commit message from CVS:
* gst/wavparse/gstwavparse.c: (gst_wavparse_perform_seek),
(gst_wavparse_stream_headers), (gst_wavparse_stream_data),
(gst_wavparse_pad_convert), (gst_wavparse_srcpad_event),
(gst_wavparse_sink_activate), (gst_wavparse_sink_activate_pull):
Use DEBUG_OBJECT more.
Original commit message from CVS:
* gst/wavparse/gstwavparse.c: (gst_wavparse_stream_headers):
Pass extra_data to gst_riff_create_audio_caps(), so that
WAVEFORMATEX stuff works. Post audio codec name and post
it as taglist on the bus. Allow up to 8 channesl for raw
PCM in the source pad template caps.
Original commit message from CVS:
* gst/wavparse/gstwavparse.c: (gst_wavparse_pad_convert):
Fix conversion from TIME to BYTES format (fixes#326864;
patch by: Tommi Myöhänen <ext-tommi dot myohanen at nokia dot com>)
Original commit message from CVS:
* gst/avi/gstavidemux.c: (gst_avi_demux_reset),
(gst_avi_demux_handle_src_event), (gst_avi_demux_parse_stream),
(gst_avi_demux_parse_odml), (gst_avi_demux_peek_tag),
(gst_avi_demux_next_data_buffer), (gst_avi_demux_stream_scan),
(gst_avi_demux_stream_header), (gst_avi_demux_loop):
Construct index for indexless files.
Make sure pad/buffers are correctly reset to NULL once we don't need
them anymore, else we get lovely segfaults/assertions.
* gst/wavparse/gstwavparse.c:
Yes, you can have 96KHz audio and wma in wav :(
Original commit message from CVS:
* gst/wavparse/gstwavparse.c: (gst_wavparse_reset),
(gst_wavparse_other), (gst_wavparse_perform_seek),
(gst_wavparse_stream_headers), (gst_wavparse_stream_data),
(gst_wavparse_loop), (gst_wavparse_pad_convert),
(gst_wavparse_srcpad_event), (gst_wavparse_sink_activate_pull):
* gst/wavparse/gstwavparse.h:
Use GstSegment to implement more seeking features.
Original commit message from CVS:
* gst/wavparse/gstwavparse.c: (gst_wavparse_init),
(gst_wavparse_create_sourcepad), (gst_wavparse_sink_activate):
Use GST_DEBUG_FUNCPTR; add debug message in pad activate function.
Original commit message from CVS:
* gst/wavparse/gstwavparse.c: (gst_wavparse_handle_seek),
(gst_wavparse_stream_headers), (gst_wavparse_stream_data),
(gst_wavparse_pad_convert), (gst_wavparse_srcpad_event):
Set stream time correctly in newsegment.
Original commit message from CVS:
* gst/wavparse/gstwavparse.c: (gst_wavparse_handle_seek),
(gst_wavparse_stream_headers), (gst_wavparse_stream_data),
(gst_wavparse_pad_convert), (gst_wavparse_srcpad_event):
Fix for segment-start/stop API change.
Original commit message from CVS:
* ext/mad/Makefile.am:
* gst/avi/Makefile.am:
* gst/effectv/Makefile.am:
* gst/udp/Makefile.am:
* gst/wavparse/Makefile.am:
Use -lgstfoo-@GST_MAJORMINOR@ instead of -lgstfoo-0.9
Original commit message from CVS:
* gst/wavparse/gstwavparse.c: (gst_wavparse_stream_headers),
(gst_wavparse_stream_data):
Add some fixes from 0.8 branch: allow 24/32bps songs and
blockalign samples to the header-specified size, if any
(#311070); error out on channels==0 or bitrate==0
(#309043, #304588).
Original commit message from CVS:
* configure.ac:
* gst/wavparse/gstwavparse.c:
* gst/wavparse/gstwavparse.h:
* gst/wavparse/Makefile.am:
Ported wavparse to 0.9 . Playing, seeking and state changes work.
Could need more loving on the headers though.
Original commit message from CVS:
* gst-libs/gst/riff/riff-media.c:
(gst_riff_create_audio_caps_with_data):
Do actually fix invalid RIFF fmt header values for alaw
and mulaw audio instead of just saying so.
* gst/wavparse/gstwavparse.c: (gst_wavparse_fmt):
Give gst_riff_create_audio_caps_with_data() a chance to
fix up broken format header fields before extracting any
parameters from the header. (fixes#167633)
Original commit message from CVS:
* ext/a52dec/gsta52dec.c: (gst_a52dec_push),
(gst_a52dec_handle_event), (gst_a52dec_chain):
Add some debug output. Check that a discont has a valid
time associated.
* ext/alsa/gstalsasink.c: (gst_alsa_sink_check_event),
(gst_alsa_sink_loop):
Ignore TAG events. A little extra debug for broken timestamps.
* ext/dvdnav/dvdnavsrc.c: (dvdnavsrc_init), (dvdnavsrc_loop),
(dvdnavsrc_change_state):
Ensure we send a discont to engage the link before we send any
other events.
* ext/dvdread/dvdreadsrc.c: (dvdreadsrc_init),
(dvdreadsrc_finalize), (_close), (_open), (_seek_title),
(_seek_chapter), (seek_sector), (dvdreadsrc_get),
(dvdreadsrc_uri_get_uri), (dvdreadsrc_uri_set_uri):
Handle URI of the form dvd://title[,chapter[,angle]]. Currently only
dvd://title works in totem because typefinding sends a seek that ends
up going back to chapter 1 regardless.
* ext/mpeg2dec/gstmpeg2dec.c:
* ext/mpeg2dec/gstmpeg2dec.h:
Output correct timestamps and handle disconts.
* ext/ogg/gstoggdemux.c: (get_relative):
Small guard against a null dereference.
* ext/pango/gsttextoverlay.c: (gst_textoverlay_finalize),
(gst_textoverlay_set_property):
Free memory when done. Don't call gst_event_filler_get_duration on
EOS events. Use GST_LOG and GST_WARNING instead of g_message and
g_warning.
* ext/smoothwave/gstsmoothwave.c: (gst_smoothwave_init),
(draw_line), (gst_smoothwave_dispose), (gst_sw_sinklink),
(gst_sw_srclink), (gst_smoothwave_chain):
Draw solid lines, prettier colours.
* gst/mpeg2sub/gstmpeg2subt.c: (gst_mpeg2subt_init):
Add a default palette that'll work for some movies.
* gst/mpegstream/gstdvddemux.c: (gst_dvd_demux_init),
(gst_dvd_demux_handle_dvd_event), (gst_dvd_demux_send_discont),
(gst_dvd_demux_send_subbuffer), (gst_dvd_demux_reset):
* gst/mpegstream/gstdvddemux.h:
* gst/mpegstream/gstmpegdemux.c: (gst_mpeg_demux_send_discont),
(gst_mpeg_demux_parse_syshead), (gst_mpeg_demux_parse_pes):
* gst/mpegstream/gstmpegparse.c: (gst_mpeg_parse_init),
(gst_mpeg_parse_handle_discont), (gst_mpeg_parse_parse_packhead):
* gst/mpegstream/gstmpegparse.h:
Use PTM/NAV events when for timestamp adjustment when connected to
dvdnavsrc. Don't use many discont events where one suffices.
* gst/playback/gstplaybasebin.c: (group_destroy),
(gen_preroll_element), (gst_play_base_bin_add_element):
* gst/playback/gstplaybasebin.h:
Make sure we remove subtitles from the same bin we put them in.
* gst/subparse/gstsubparse.c: (convert_encoding), (parse_subrip),
(gst_subparse_buffer_format_autodetect),
(gst_subparse_change_state):
Fix some memleaks and invalid accesses.
* gst/typefind/gsttypefindfunctions.c: (ogganx_type_find),
(oggskel_type_find), (cmml_type_find), (plugin_init):
Some typefind functions for Annodex v3.0 files
* gst/wavparse/gstwavparse.h:
GstRiffReadClass is the correct parent class.
Original commit message from CVS:
Reviewd by: Ronald S. Bultje <rbultje@ronald.bitfreak.net>
* gst/wavparse/gstwavparse.c: (gst_wavparse_fmt):
Fix memleak (#155223).
Original commit message from CVS:
* gst/wavparse/gstwavparse.c:
add ATRAC3 to STATIC CAPS to fix a warning
* gst/matroska/ebml-read.c:
* gst-libs/gst/riff/riff-read.c:
fix typos
Original commit message from CVS:
* gst/wavparse/Makefile.am
* gst/wavparse/riff.h
* gst/wavparse/wavparse.vcproj
riff.h removal (unused and duplication with riff-ids.h)
Original commit message from CVS:
gstwavparse.c: it did not build in system with Glib < 2.4 because it
used the macro G_MAXUINT32. Now we define the macro if it is not yet
defined.
Original commit message from CVS:
* gst/wavparse/gstwavparse.c: (gst_wavparse_class_init),
(gst_wavparse_stream_init), (gst_wavparse_fmt),
(gst_wavparse_other), (gst_wavparse_loop),
(gst_wavparse_pad_convert), (gst_wavparse_pad_query),
(gst_wavparse_srcpad_event):
* gst/wavparse/gstwavparse.h:
Added some more debugging info.
Fix the case where the length of the file is 0.
Make sure we seek to sample borders.
Original commit message from CVS:
Reviewed by: Ronald S. Bultje <rbultje@ronald.bitfreak.net>
* gst/wavparse/gstwavparse.c: (gst_wavparse_fmt):
Throw error if we didn't recognize the stream. Fixes#152289.
Original commit message from CVS:
Reviewed by: Ronald S. Bultje <rbultje@ronald.bitfreak.net>
* gst/wavparse/gstwavparse.c: (gst_wavparse_fmt):
Fix memleak.
Original commit message from CVS:
* gst/wavparse/gstwavparse.c: (gst_wavparse_fmt),
(gst_wavparse_handle_seek), (gst_wavparse_srcpad_event):
Add the pad to the element after setting up the caps. This
makes it a lot easier to autoplug.
Original commit message from CVS:
Set the explicit caps on the pad when the file is parsed as explicit caps get wiped during state changes. fixes bug #148043
Original commit message from CVS:
* gst-libs/gst/riff/riff-media.c:
(gst_riff_create_video_caps_with_data):
mp42/mp43 (no caps) exist too.
* gst/matroska/matroska-demux.c: (gst_matroska_demux_video_caps):
Set pixel_width/height; we've got them in-caps.
* gst/typefind/gsttypefindfunctions.c: (plugin_init):
* gst/wavparse/gstwavparse.c: (plugin_init):
Both are valid primary.
* sys/oss/gstossmixer.c:
Remove i18n hack and enable translations.
