Original commit message from CVS:
2007-03-27 Julien MOUTTE <julien@moutte.net>
* ext/xvid/gstxviddec.c: (gst_xviddec_chain): Add some
debug log and fix a stupid output buffer duration bug.
Original commit message from CVS:
* ext/wavpack/gstwavpackparse.c: (gst_wavpack_parse_plugin_init):
Revert last commit, preventing infinite plugging loops with ranks
is no clean solution and in general there's no reason why one wants
to parse framed wavpack data again.
Original commit message from CVS:
* ext/wavpack/gstwavpackenc.c: (gst_wavpack_enc_push_block):
Send the new segment event in time format instead of bytes. This
allows "wavpackenc ! wavpackdec ! someaudiosink" pipelines.
* ext/wavpack/gstwavpackparse.c: (gst_wavpack_parse_plugin_init):
Accept framed and non-framed input, wavpackparse doesn't care. To
prevent "wavpackparse ! wavpackparse ! ..." pipelines lower the
rank of wavpackparse by one. This allows "wavpackenc ! wavpackparse !
..." pipelines.
Original commit message from CVS:
* ext/wavpack/gstwavpackdec.c: (gst_wavpack_dec_chain):
Revert to use gst_pad_alloc_buffer() here. We can and should use it.
Thanks to Jan and Mike for noticing my mistake.
Original commit message from CVS:
* ext/wavpack/gstwavpackenc.c: (gst_wavpack_enc_class_init),
(gst_wavpack_enc_init), (gst_wavpack_enc_chain),
(gst_wavpack_enc_rewrite_first_block):
* ext/wavpack/gstwavpackenc.h:
Put the write helpers into the GstWavpackEnc struct directly and not
as a pointer to save two small, but useless mallocs. This also makes
it possible to drop the finalize method.
* ext/wavpack/gstwavpackparse.c: (gst_wavpack_parse_push_buffer):
For consistency reasons also set GST_BUFFER_OFFSET_END on the outgoing
buffers the same way wavpackenc does it.
Original commit message from CVS:
* ext/wavpack/gstwavpackdec.c: (gst_wavpack_dec_chain):
Don't use gst_pad_alloc_buffer() as we might clip the buffer later and
BaseTransform-based elements will likely break because of wrong
unit-size. Also plug a possible memleak that happens when decoding
fails for some reason.
Original commit message from CVS:
Based on patch by: Paul Davis <paul at linuxaudiosystems dot com>
* ext/jack/gstjackaudioclient.c: (gst_jack_audio_unref_connection):
Don't need to take the connection lock, it will not be used and could
cause deadlocks.
Original commit message from CVS:
Includes patch by: Paul Davis <paul at linuxaudiosystems dot com>
* ext/jack/Makefile.am:
* ext/jack/gstjackaudioclient.c: (gst_jack_audio_client_init),
(jack_process_cb), (jack_sample_rate_cb), (jack_buffer_size_cb),
(jack_shutdown_cb), (connection_find),
(gst_jack_audio_make_connection), (gst_jack_audio_get_connection),
(gst_jack_audio_unref_connection),
(gst_jack_audio_connection_add_client),
(gst_jack_audio_connection_remove_client),
(gst_jack_audio_client_new), (gst_jack_audio_client_free),
(gst_jack_audio_client_get_client),
(gst_jack_audio_client_set_active):
* ext/jack/gstjackaudioclient.h:
Make an object to manage client connections to the jack server which we
will use in the future to run selected jack elements with the same jack
connection.
Make some stuff a bit more threadsafe.
Activate the jack client ASAP.
* ext/jack/gstjackaudiosink.c:
(gst_jack_audio_sink_allocate_channels),
(gst_jack_audio_sink_free_channels), (jack_process_cb),
(gst_jack_ring_buffer_open_device),
(gst_jack_ring_buffer_close_device),
(gst_jack_ring_buffer_acquire), (gst_jack_ring_buffer_release),
(gst_jack_audio_sink_class_init), (gst_jack_audio_sink_init),
(gst_jack_audio_sink_getcaps):
* ext/jack/gstjackaudiosink.h:
Use new client object to manage connections.
Don't remove and recreate all ports, try to reuse them.
Original commit message from CVS:
* ext/wavpack/gstwavpack.c: (plugin_init):
* ext/wavpack/gstwavpackcommon.c:
Use a general wavpack debug category for common code.
* ext/wavpack/gstwavpackstreamreader.c:
(gst_wavpack_stream_reader_set_pos_abs),
(gst_wavpack_stream_reader_set_pos_rel),
(gst_wavpack_stream_reader_write_bytes):
Use the general wavpack debug category here too and add debug
output to the functions that should not be called at all by
the wavpack library.
* ext/wavpack/gstwavpackdec.c: (gst_wavpack_dec_plugin_init):
* ext/wavpack/gstwavpackenc.c: (gst_wavpack_enc_plugin_init):
* ext/wavpack/gstwavpackparse.c: (gst_wavpack_parse_plugin_init):
Change debugging category names to conform to the conventions.
Original commit message from CVS:
* ext/nas/nassink.c: (gst_nas_sink_class_init),
(gst_nas_sink_init), (gst_nas_sink_getcaps),
(gst_nas_sink_unprepare):
Some more cleanups/changes; use boilerplate macro.
Original commit message from CVS:
* ext/nas/Makefile.am:
* ext/nas/README:
* ext/nas/nassink.c: (gst_nas_sink_get_type),
(gst_nas_sink_base_init), (gst_nas_sink_class_init),
(gst_nas_sink_init), (gst_nas_sink_finalize),
(gst_nas_sink_getcaps), (gst_nas_sink_prepare),
(gst_nas_sink_unprepare), (gst_nas_sink_delay),
(gst_nas_sink_reset), (gst_nas_sink_write),
(gst_nas_sink_set_property), (gst_nas_sink_get_property),
(gst_nas_sink_open), (gst_nas_sink_close), (NAS_flush),
(NAS_sendData), (NAS_EventHandler), (gst_nas_sink_sink_get_format),
(NAS_createFlow), (plugin_init):
* ext/nas/nassink.h:
Bunch of nassink clean-ups: make build by adding the right CFLAGS
and LIBS to Makefile.am; rename structure, macros and functions
according to canonical naming scheme; move some things around a bit;
use GST_CAT_DEFAULT instead of GST_CAT_* everywhere; remove README
file that didn't really contain any useful information anyway (the
useful bits have been moved into the 'host' property description).
Original commit message from CVS:
* ext/dts/gstdtsdec.c: (gst_dtsdec_init), (gst_dtsdec_sink_event):
A few small clean-ups.
* gst/real/gstrealaudiodec.c: (gst_real_audio_dec_setcaps):
More debug output for failure cases.
Original commit message from CVS:
Patch by: Young-Ho Cha <ganadist at chollian net>
* ext/dts/gstdtsdec.c: (gst_dtsdec_handle_frame),
(gst_dtsdec_change_state):
Don't do forced downmixing to stereo, but check what downstream
can do and let libdts do the downmixing based on that (#400555).
Original commit message from CVS:
Patch by: Lutz Mueller <lutz topfrose de>
* ext/neon/gstneonhttpsrc.c: (gst_neonhttp_src_class_init),
(gst_neonhttp_src_init), (gst_neonhttp_src_set_property),
(gst_neonhttp_src_set_uri), (gst_neonhttp_src_set_proxy),
(gst_neonhttp_src_send_request_and_redirect),
(gst_neonhttp_src_uri_set_uri):
* ext/neon/gstneonhttpsrc.h:
Simplify _set_uri() and _set_proxy() and remove the unused ishttp
member (#388050).
* tests/check/elements/neonhttpsrc.c: (GST_START_TEST):
Fix bogus URI to something that actually exists, otherwise we just
bypass the test (and also to something that doesn't redirect, since
neonhttpsrc doesn't seem to handle this very gracefully yet)
Original commit message from CVS:
* configure.ac:
* docs/plugins/Makefile.am:
Add crossreferences to glib/gobject/gstream docs. Also fix typo in
timidity.cfg check.
* ext/timidity/gsttimidity.c: (plugin_init):
Also build if no config was detected at configure time.
Original commit message from CVS:
* configure.ac:
Tell the code which faad it is, so that we can adjust the hacks
needed.
* ext/faad/gstfaad.c:
Make our hacks dependent on the fadd lib in use.
Original commit message from CVS:
* ext/amrwb/gstamrwbparse.c: (gst_amrwbparse_query):
GST_PAD_PARENT doesn't return a GstObject with an incremented refcount.
Switched to using gst_pad_get_parent().
Original commit message from CVS:
2007-02-05 Andy Wingo <wingo@pobox.com>
* ext/sndfile/Makefile.am:
* ext/sndfile/gstsfsrc.h:
* ext/sndfile/gstsfsrc.c: Port sfsrc to 0.10, pull or push, with
random access woo.
Original commit message from CVS:
2007-02-02 Andy Wingo <wingo@pobox.com>
* configure.ac:
* ext/Makefile.am
* ext/sndfile/Makefile.am:
* ext/sndfile/gstsf.c:
* ext/sndfile/gstsf.h:
* ext/sndfile/gstsfsink.c:
* ext/sndfile/gstsfsink.h: Port sfsink to 0.10. Works in pull or
push mode with interleaved float or int data.
Original commit message from CVS:
* ext/alsaspdif/alsaspdifsink.c: (plugin_init):
Set rank to NONE so that it doesn't get autoplugged by autoaudiosink
(which didn't happen previously because the klass string didn't
contain anything autoaudiosink was looking for).
Original commit message from CVS:
* ext/wavpack/gstwavpackparse.c: (gst_wavpack_parse_src_query),
(gst_wavpack_parse_handle_seek_event),
(gst_wavpack_parse_create_src_pad):
Fix a off by one that leads to the duration reported as one
sample less than it is
Original commit message from CVS:
* ext/ladspa/Makefile.am:
* ext/ladspa/gstladspa.c: (gst_ladspa_class_get_param_spec):
add GstController support to ladspa
Original commit message from CVS:
Patch by: Rosfran Borges <rosfran dot borges at idnt org br>
* ext/mythtv/gstmythtvsrc.c: (gst_mythtv_src_start),
(gst_mythtv_src_next_program_chain):
Remove sleep calls, they've been moved into the library now ...
(#354451).
Original commit message from CVS:
* ext/wavpack/gstwavpackparse.c: (gst_wavpack_parse_src_query):
Fix the SEEKING query. We can seek if we are in pull mode, not the
other way around. Also set the correct format in the seeking query and
handle the case where the headers are not read yet and we can't say
anything about our seeking capabilities.
Original commit message from CVS:
* ext/wavpack/gstwavpackdec.c: (gst_wavpack_dec_base_init):
* ext/wavpack/gstwavpackparse.c: (gst_wavpack_parse_base_init):
Fix spelling in 2 places: It's called Wavpack, not WavePack.
Original commit message from CVS:
* ext/mythtv/gstmythtvsrc.c: (do_read_request_response),
(gst_mythtv_src_create), (gst_mythtv_src_get_position),
(gst_mythtv_src_do_seek), (gst_mythtv_src_start),
(gst_mythtv_src_next_program_chain), (gst_mythtv_src_get_size),
(gst_mythtv_src_handle_event), (gst_mythtv_src_handle_query),
(gst_mythtv_src_change_state), (gst_mythtv_src_set_property),
(gst_mythtv_src_uri_get_type):
Clean up a bit, mostly the debug statements; fix deadlock in
_set_property() in the error cases; fix up query function.
Original commit message from CVS:
2007-01-12 Andy Wingo <wingo@pobox.com>
* ext/ladspa/gstsignalprocessor.c (gst_signal_processor_fixate)
(gst_signal_processor_ouija_caps, gst_signal_processor_prepare):
Remove fixate/ouija stuff, thankfully, due to the new
part-negotiation.txt pull-mode negotiation scheme.
(gst_signal_processor_setcaps_pull)
(gst_signal_processor_setcaps): Implement upstream set_caps pull
proxying for pull mode. Now this works: ladspa-sine-fcac !
audioconvert ! alsasink.
Original commit message from CVS:
Patch by: Sebastian Dröge <slomo@circular-chaos.org>
* ext/wavpack/gstwavpackenc.c: (gst_wavpack_enc_mode_get_type),
(gst_wavpack_enc_correction_mode_get_type),
(gst_wavpack_enc_joint_stereo_mode_get_type):
Minor clean-up: use enum values instead of hardcoded constants (#395536).
Original commit message from CVS:
2007-01-06 Andy Wingo <wingo@pobox.com>
* ext/ladspa/gstsignalprocessor.c
(gst_signal_processor_ouija_caps): Move around in the source
file...
(gst_signal_processor_prepare, gst_signal_processor_do_pulls):
Call ouija_caps in prepare() instead of do_pulls(), a bit earlier.
This allows us to have caps when we do the pad_alloc_buffer().
(gst_pad_alloc_buffer_and_set_caps): Use self->caps instead of the
pad caps, which might not be set yet.
Original commit message from CVS:
2007-01-06 Andy Wingo <wingo@pobox.com>
* ext/ladspa/gstsignalprocessor.c:
(gst_signal_processor_add_pad_from_template)
(gst_signal_processor_fixate): Add a fixate function, to assist in
pathological ladspa-sine-fcac ! fakesink can-activate-pull=true
cases.
(gst_signal_processor_prepare, gst_signal_processor_process): Add
nframes args so that getrange can tell ladspa how many frames to
process.
(gst_signal_processor_ouija_caps): setcaps needs to be called
before processing, which normally happens when chaining a buffer
to a pad. However in getrange mode with no sinks we need to check
explicitly for this condition, guess some caps to use, and use
those to setcaps(). Hence this mystical function.
(gst_signal_processor_do_pulls): Pull in bytes, not samples.
Divine the caps if necessary.
(gst_signal_processor_getrange): Interpret the length as bytes,
not samples.
(gst_signal_processor_chain): nframes=G_MAXUINT, will be limited
by incoming buffer sizes.
Original commit message from CVS:
* configure.ac:
* ext/Makefile.am:
* ext/ladspa/*:
Move LADPSA plugin from -good for the release, as it's not quite
ready to be enabled by default in the -good module yet.
Original commit message from CVS:
* ext/ladspa/gstsignalprocessor.c: (gst_signal_processor_setcaps),
(gst_signal_processor_event):
Reset flow_state back to _OK after a flush stop so that we exit our
error state after the flush. Fixes#374213
Original commit message from CVS:
* ext/wavpack/gstwavpackenc.h:
Use local copy of md5.h, as it disappeared in recent wavpack
installs.
Patch by: Sebastian Dröge <slomo at ubuntu dot com>
Fixes: #387076
Original commit message from CVS:
* ext/neon/gstneonhttpsrc.c: (gst_neonhttp_src_create),
(send_request_and_redirect):
Fix minor mem leak in redirect code.
* tests/check/Makefile.am:
* tests/check/elements/.cvsignore:
* tests/check/elements/neonhttpsrc.c: (handoff_cb),
(GST_START_TEST), (neonhttpsrc_suite):
* tests/check/gst-plugins-bad.supp:
Add super-basic unit test for #384140.
Original commit message from CVS:
* ext/neon/gstneonhttpsrc.c: (gst_neonhttp_src_create),
(send_request_and_redirect):
Set offset on buffers pushed out (id3demux gets confused if the
first buffer does not have an offset of 0). Fixes#384140.
Original commit message from CVS:
* ext/neon/gstneonhttpsrc.c: (gst_neonhttp_src_class_init),
(gst_neonhttp_src_create), (send_request_and_redirect),
(gst_neonhttp_src_start), (oom_callback):
Minor clean-ups; remove newlines at end of debug statements.
Original commit message from CVS:
* ext/theora/theoradec.c: (theora_dec_src_query),
(theora_dec_src_event), (theora_handle_data_packet),
(theora_dec_chain):
Send events on the right pads, since they don't work very well if
you send them in the wrong direction.
Original commit message from CVS:
Patch by: Sebastian Dröge <slomo@circular-chaos.org>
* ext/wavpack/gstwavpackdec.c: (gst_wavpack_dec_reset),
(gst_wavpack_dec_init), (gst_wavpack_dec_change_state):
* ext/wavpack/gstwavpackenc.c: (gst_wavpack_enc_base_init),
(gst_wavpack_enc_class_init), (gst_wavpack_enc_reset),
(gst_wavpack_enc_init), (gst_wavpack_enc_set_wp_config),
(gst_wavpack_enc_change_state):
* ext/wavpack/gstwavpackparse.c:
Some small clean-ups: use enums instead of hard-coded numbers,
const-ify element details, re-factor some code into _reset()
functions (#352605).
Original commit message from CVS:
Patch by: Sebastian Dröge <slomo at circular-chaos.org>
* configure.ac:
* ext/wavpack/gstwavpackenc.c: (gst_wavpack_enc_mode_get_type),
(gst_wavpack_enc_correction_mode_get_type),
(gst_wavpack_enc_joint_stereo_mode_get_type),
(gst_wavpack_enc_init), (gst_wavpack_enc_set_wp_config):
Fix enum nicks; only emit no-more-pads once; add support for very
fast encoding mode in upcoming 4.40.0 release (#369539).
Original commit message from CVS:
* ext/dts/gstdtsdec.c: (gst_dtsdec_handle_frame):
Fix flow handling and buffer refcounting (gst_pad_push() takes
ownership of the buffer passed to it, the buffer does not have
to be unreffed no matter what flow value gst_pad_push() returns).
Original commit message from CVS:
* ext/wavpack/gstwavpackenc.c: (gst_wavpack_enc_set_wp_config):
* ext/wavpack/gstwavpackparse.c:
(gst_wavpack_parse_create_src_pad):
* gst/nuvdemux/gstnuvdemux.c: (gst_nuv_demux_create_pads):
* tests/check/elements/wavpackparse.c: (wavpackparse_found_pad):
Activate pads before adding them to running element.
Original commit message from CVS:
* ext/faad/gstfaad.c: (gst_faad_setcaps), (gst_faad_chain),
(gst_faad_close_decoder):
Some cleanups.
Added some more debugging.
Don't ever ignore unlinked, we're not a demuxer.
* gst/qtdemux/qtdemux.c: (gst_qtdemux_add_stream):
Activate pad before adding it to the element.
Original commit message from CVS:
* ext/theora/theoradec.c: (gst_theoradec_reset),
(theora_get_query_types), (theora_dec_src_query),
(theora_dec_src_event), (theora_dec_sink_event),
(theora_handle_comment_packet), (theora_handle_type_packet),
(theora_handle_header_packet), (clip_buffer), (theora_dec_push),
(theora_handle_422_image), (theora_handle_420_image),
(theora_handle_data_packet), (theora_dec_chain),
(theora_dec_change_state):
* ext/theora/theoradec.h:
Port lots of changes from theoradec to theoraexpdec.
This catches this plugin up to theoradec. Note that duplicate frames
are broken in theoradec at the moment.
Original commit message from CVS:
* ext/xvid/gstxvid.c: (plugin_init):
Set rank of xviddec to NONE until someone fixes it (too many crasher
bug reports against totem, people should use gst-ffmpeg).
Original commit message from CVS:
* ext/cdaudio/gstcdaudio.c: (gst_cdaudio_class_init),
(gst_cdaudio_init), (gst_cdaudio_set_property),
(gst_cdaudio_get_property), (gst_cdaudio_change_state),
(gst_cdaudio_send_event), (gst_cdaudio_get_query_types),
(gst_cdaudio_query), (cdaudio_uri_set_uri):
Port to 0.10.
Original commit message from CVS:
* ext/directfb/dfbvideosink.c: (plugin_init):
Lower rank from SECONDARY to MARGINAL. Plugins in -bad that might
be autoplugged shouldn't trump plugins in -base, -good or -ugly
(in this case ximagesink).
* sys/glsink/glimagesink.c: (plugin_init):
Set rank to NONE to prevent it from being autoplugged until
errors are handled properly (see #357212).
Original commit message from CVS:
Reverted previous commit (2006-09-19 - Allow internal codes from last.fm). As dicussed on #gstreamer it should be done in separete element.
Original commit message from CVS:
* ext/faac/gstfaac.c: (gst_faac_configure_source_pad),
(gst_faac_chain):
Add decoder specific info on the caps.
Some cleanups here and there.
Original commit message from CVS:
* ext/gsm/gstgsmdec.c: (gst_gsmdec_init),
(gst_gsmdec_sink_setcaps), (gst_gsmdec_sink_event),
(gst_gsmdec_chain):
* ext/gsm/gstgsmdec.h:
Handle WAV49 variant (GSM in WAV).
Some small cleanups.
Original commit message from CVS:
Patch by: Andrew Andkjar <enki at goodship net>
* ext/sdl/sdlaudiosink.c: (gst_sdlaudio_sink_close):
* ext/sdl/sdlvideosink.c: (gst_sdlvideosink_supported),
(gst_sdlvideosink_deinitsdl):
Only de-init the subsystem we previously initialised. Avoids
borkage when both sdlvideosink and sdlaudiosink are used
at the same time and one is shut down.
Original commit message from CVS:
Patch by: Sebastian Dröge <slomo at circular-chaos.org>
* ext/wavpack/gstwavpackdec.c: (gst_wavpack_dec_post_tags),
(gst_wavpack_dec_chain):
Post audio codec and average bitrate tags on bus (#344472).
* ext/wavpack/gstwavpackparse.c: (gst_wavpack_parse_base_init),
(gst_wavpack_parse_src_query):
Forward queries in other formats (BYTE format in particular)
upstream; add Sebastian to authors.
Original commit message from CVS:
* ext/wavpack/gstwavpackenc.c: (gst_wavpack_enc_push_block):
Fix mem leak, send newsegment event on correction pad
as well (#352476).
* ext/wavpack/gstwavpackparse.c: (gst_wavpack_parse_base_init):
Restore original author (on Sebastian's request).
* tests/check/Makefile.am:
* tests/check/gst-plugins-bad.supp:
Add (so far empty) suppression file for -bad. Remove
wavpackenc test from VALGRIND_TO_FIX now that the leak
is fixed.
Original commit message from CVS:
* ext/wavpack/gstwavpackenc.c: (gst_wavpack_enc_init),
(gst_wavpack_enc_finalize), (gst_wavpack_enc_sink_set_caps),
(gst_wavpack_enc_set_wp_config), (gst_wavpack_enc_format_samples),
(gst_wavpack_enc_push_block), (gst_wavpack_enc_chain),
(gst_wavpack_enc_rewrite_first_block),
(gst_wavpack_enc_sink_event), (gst_wavpack_enc_change_state),
(gst_wavpack_enc_set_property), (gst_wavpack_enc_get_property):
* ext/wavpack/gstwavpackenc.h:
* ext/wavpack/gstwavpackparse.c: (gst_wavpack_parse_reset),
(gst_wavpack_parse_src_query), (gst_wavpack_parse_src_event),
(gst_wavpack_parse_init), (gst_wavpack_parse_get_upstream_length),
(gst_wavpack_parse_loop):
More clean-ups: use shorter variable names to make code easier to
read; prefix structures we define with 'Gst' to make it clearer
where they come from.
Original commit message from CVS:
* ext/wavpack/gstwavpackenc.c: (gst_wavpack_enc_init),
(gst_wavpack_enc_set_wp_config), (gst_wavpack_enc_push_block),
(gst_wavpack_enc_chain), (gst_wavpack_enc_rewrite_first_block),
(gst_wavpack_enc_sink_event):
Fix caps set on buffers and template caps (output is framed)
and make them match (#351663); use GST_WARNING_OBJECT instead of
GST_ELEMENT_WARNING; simplify push_block(); do some small
clean-ups here and there; fix memleak (#351663).
Original commit message from CVS:
Based on patch by: Sebastian Dröge <slomo at circular-chaos.org>
* ext/wavpack/gstwavpackparse.c: (gst_wavpack_parse_sink_event),
(gst_wavpack_parse_get_upstream_length),
(gst_wavpack_parse_find_marker), (gst_wavpack_parse_resync_loop),
(gst_wavpack_parse_loop), (gst_wavpack_parse_resync_adapter):
Fix resyncing in push mode not stopping re-syncing at embedded
zeroes; skip garbage between frames in pull mode as well if
necessary; use gst_pad_query_peer_duration(); push EOS and
NEWSEGMENT event in right direction (#351659).
Original commit message from CVS:
* ext/ladspa/gstladspa.c: (gst_ladspa_base_init):
Convert ' ' into '_'. Try to keep as many characters in the padtemplate
names as possible.
Original commit message from CVS:
* ext/ladspa/gstsignalprocessor.c: (gst_signal_processor_flush),
(gst_signal_processor_do_pushes):
A push() gives away our refcount so we should not use the buffer on the
pen anymore.
Original commit message from CVS:
Patch by: Sebastian Dröge <slomo at circular-chaos.org>
* ext/wavpack/gstwavpackenc.c: (gst_wavpack_enc_class_init):
* ext/wavpack/gstwavpackparse.c:
(gst_wavpack_parse_resync_adapter), (gst_wavpack_parse_chain):
In push mode, re-sync to next wavpack header if sync is lost
(#351557). Also use hyphens instead of underscores in
GObject property names.
Original commit message from CVS:
* ext/wavpack/gstwavpackparse.c: (gst_wavpack_parse_class_init),
(gst_wavpack_parse_reset), (gst_wavpack_parse_get_src_query_types),
(gst_wavpack_parse_src_query),
(gst_wavpack_parse_handle_seek_event),
(gst_wavpack_parse_sink_event), (gst_wavpack_parse_init),
(gst_wavpack_parse_create_src_pad),
(gst_wavpack_parse_push_buffer), (gst_wavpack_parse_loop),
(gst_wavpack_parse_chain), (gst_wavpack_parse_sink_activate),
(gst_wavpack_parse_sink_activate_pull):
* ext/wavpack/gstwavpackparse.h:
Patch by: Sebastian Dröge <slomo at circular-chaos.org>
Make wavpackparse also work in push-mode (not seekable yet though);
some small clean-ups along the way; add support for SEEKING query
and query types function. (#351495).
Original commit message from CVS:
Patch by: Michal Benes <michal.benes at itonis tv>
* ext/faac/gstfaac.c: (gst_faac_configure_source_pad):
Bitrate in the faac structure is per output channel,
not total bitrate (#350741).
