Sebastian Dröge
85c6b9b712
videomixer: Make selection of a sinkpad number threadsafe
2010-05-05 19:35:48 +02:00
Sebastian Dröge
9d6e4a7ac8
deinterlace: Add support for all common RGB formats
2010-05-05 17:39:32 +02:00
Sebastian Dröge
848f071ef4
deinterlace: Add support for AYUV
2010-05-05 16:06:51 +02:00
Wim Taymans
d6579912cb
rtspsrc: make setup url in a smarter way
...
Make sure we always separate the base and control url parts with a / when
creating the setup url.
2010-05-04 16:36:15 +02:00
Alessandro Decina
c8a02a91a6
rtspsrc: handle SEEKING queries.
2010-05-04 16:05:13 +02:00
Mark Nauwelaerts
220f865f77
rtpmp4vpay: add config-interval parameter to re-insert config in stream
...
Add a new config-interval property to instruct the payloader to insert
config (VOSH, VOS, etc) at periodic intervals in the stream
(when a GOP or VOP-I is encountered).
Based on patch by <marc.leeman at gmail.com>
Fixes #607452 .
2010-05-04 11:19:43 +02:00
Alessandro Decina
40899379c0
rtpjitterbuffer: move some initialization code from change_state to _init.
...
Set ->active to TRUE in _init so it can be set to FALSE after creating the
jitterbuffer and it won't be mistakenly reset to TRUE in the change_state
function.
This is needed to start the jitterbuffer as inactive when rtpbin is buffering.
2010-05-03 13:34:59 +02:00
Alessandro Decina
ffc2da30fc
rtpbin: fix a bug handling BUFFERING messages.
...
If a session exists but has no streams, set the min buffering percent to 0
since it means that we haven't received anything for that session yet.
2010-05-03 11:56:58 +02:00
Alessandro Decina
f6e9f359b9
rtpbin: when a stream is created, pause the jitterbuffer if rtpbin is buffering.
2010-05-03 11:51:37 +02:00
Alessandro Decina
38a5b08ef2
rtpbin: fix a bug calculating stream offsets.
2010-05-03 11:23:59 +02:00
Sebastian Dröge
ad1c01661f
matroskamux: Write previous cluster's size
...
This is useful for backwards playback, which should be implemented
in matroskademux at some point.
2010-05-01 14:20:59 +02:00
Sebastian Dröge
1e1cf5df70
matroskademux: Set interlaced flag in the caps if the flag is set in the Matroska file
2010-05-01 14:15:49 +02:00
Sebastian Dröge
db6a3e55c6
matroskamux: Write interlaced flag if the input video content is interlaced
...
Unfortunately Matroska has no way to specify TFF and friends...
2010-05-01 14:13:24 +02:00
Tim-Philipp Müller
c1d24699f5
rtp: fix printf format of some debug messages
2010-05-01 11:25:26 +01:00
Tim-Philipp Müller
fa4b2938bc
matroska: init variable to avoid compiler warning on OSX
...
Fixes (bogus) "'offset' may be used uninitialized in this function"
warning on build bot (also spotted by philn).
2010-05-01 11:15:04 +01:00
David Schleef
1df1d34fe1
qtdemux: UYVY is 4:2:2, not 4:2:0
2010-04-30 17:19:44 -07:00
Sebastian Dröge
2ac1f1c7ee
deinterlace: Make automatic detection of interlacing the default
...
Previously "force deinterlacing" was the default, which is a not very
sensible default for the normal use case where deinterlace should act
in passthrough mode unless interlaced content is present.
2010-04-30 22:17:12 +02:00
Mark Nauwelaerts
be5ffd96fe
rtptheoradepay: also accept in-band configuration
...
Fixes #574416 (theora).
2010-04-30 13:54:56 +02:00
Mark Nauwelaerts
a344cfba27
rtpvorbisdepay: also accept in-line configuration
...
Fixes #574416 (vorbis).
2010-04-30 13:54:52 +02:00
Olivier Crête
7bc3253761
rtptheoradepay: Ignore packets without a known codebook
...
Don't produce an error if a packet is received without a valid codebook,
it's possible that the codebook will just be coming later.
See #574416 .
2010-04-30 13:54:50 +02:00
Benjamin M. Schwartz
c3dc498278
y4menc: add 4:2:2, 4:1:1, and 4:4:4 output support
...
Fixes #610902 .
2010-04-30 13:50:08 +02:00
Mark Nauwelaerts
6bf7f5cfd3
rtph264depay: DELTA_UNIT marking of output buffers
...
... which evidently makes (most) sense if output buffers are
actually frames.
Partially based on a patch by
Miguel Angel Cabrera <mad_aluche at hotmail.com>
Fixes #609658 .
2010-04-30 13:50:03 +02:00
Mark Nauwelaerts
0206b67b1d
rtph263depay: extra keyframe info from PTYPE header
...
... as opposed to taking it from h263 payload header, which need not
be so reliable.
Fixes #610172 .
2010-04-30 13:50:00 +02:00
Mark Nauwelaerts
fe9e6d82ee
rtph263depay: also use Picture Start Code to detect packet loss
...
This ensures a whole frame is dropped if a (start) packet is lost,
rather than relying only on the DISCONT flag.
2010-04-30 13:49:57 +02:00
Mark Nauwelaerts
84ac277add
rtph263depay: detect frame start using Picture Start Code
...
So we stop dropping fragments as soon as there is a picture start (code).
In particular, this prevents dropping the first frame following
initial DISCONT.
2010-04-30 13:49:54 +02:00
Mark Nauwelaerts
e7903311f5
rtph263depay: handle a few FIXMEs
2010-04-30 13:49:51 +02:00
Mark Nauwelaerts
3692bbb7ae
rtph263depay: slightly refactor payload dropping
2010-04-30 13:49:47 +02:00
Mark Nauwelaerts
a08f76a92e
rtph263pay: use found GOBs to apply Mode A payloading
...
... rather than falling back to sending the whole frame in one packet
if number of GOB startcodes < maximum.
One might take this further and still perform Mode B/C payloading,
but at least this should cater for decent fragments in typical cases.
Fixes #599585 .
2010-04-30 13:49:43 +02:00
Mark Nauwelaerts
a6bb8338fd
matroskademux: implement push mode seeking
2010-04-30 13:49:39 +02:00
Tim-Philipp Müller
e79f7beba6
docs: update for videofilter plugin merge and add gtk-doc blurb for new property
2010-04-29 20:08:43 +01:00
Sebastian Dröge
61217b521c
deinterlace: Improve segment handling a bit
2010-04-29 19:28:24 +02:00
Sebastian Dröge
05a2732851
deinterlace: Order caps by amount of contained information
2010-04-29 19:28:24 +02:00
Sebastian Dröge
cb789617f9
deinterlace: Properly set interlaced field in getcaps
2010-04-29 19:28:24 +02:00
Sebastian Dröge
eeb5a23483
deinterlace: Add planar YUV support to all other simple methods
2010-04-29 19:28:24 +02:00
Sebastian Dröge
4ca4ac3f03
deinterlace: Add planar YUV support to greedyh method
2010-04-29 19:28:24 +02:00
Sebastian Dröge
bdb9675519
deinterlace: Add support for planar YUV formats in greedyl method
2010-04-29 19:28:24 +02:00
Sebastian Dröge
03a8379e20
deinterlace: Add support for Y444, Y42B, I420, YV12 and Y41B
...
The vfir method supports them and will be used until something else
supports it.
2010-04-29 19:28:23 +02:00
Sebastian Dröge
a626b19490
deinterlace: Define deinterlace method base classes as abstract types
2010-04-29 19:28:23 +02:00
Sebastian Dröge
600f82fbfe
deinterlace: Move deinterlacing methods to their own file
2010-04-29 19:28:23 +02:00
Sebastian Dröge
a405d5a4f1
deinterlace: Simplify passthrough mode detection
2010-04-29 19:28:23 +02:00
Sebastian Dröge
3dc7215492
deinterlace: Refactor deinterlacing as preparation for supporting more color formats
2010-04-29 19:28:23 +02:00
Sebastian Dröge
e2eb012a41
videobox: Add support for Y444, Y42B and Y41B
2010-04-29 19:28:23 +02:00
Sebastian Dröge
d20306b699
videobox: Add support for YVYU and reorder template caps
2010-04-29 19:28:23 +02:00
Sebastian Dröge
4e836d3271
videobox: Translate navigation events to make sense again upstream
2010-04-29 19:28:23 +02:00
Sebastian Dröge
a105bf49e3
videobox: Properly handle ranges/lists of width or height when transforming caps
...
Code partly taken from the videocrop element.
2010-04-29 19:28:23 +02:00
Sebastian Dröge
f71157fa06
alpha: Fix planar YUV->RGB processing
2010-04-29 19:28:22 +02:00
Sebastian Dröge
1897ab2928
alpha: Correctly clamp after YUV->RGB conversion
2010-04-29 19:28:22 +02:00
Sebastian Dröge
545b21c9bd
alpha: Add support for YUY2, YVYU and UYVY
2010-04-29 19:28:22 +02:00
Sebastian Dröge
90058bc076
videobox: Sync properties to the controller in before_transform
2010-04-29 19:28:22 +02:00
Sebastian Dröge
9fa14f8c37
videobox: Add support for YUY2 and UYUV
2010-04-29 19:28:22 +02:00
