Original commit message from CVS:
* docs/Makefile.am: the gtk-doc makefile snippet correctly
handles the case when ENABLE_GTK_DOC is false, and installs
the prebuilt documentation. So gtk-doc subdirs are
unconditionally enabled. Fixes: #349099.
Original commit message from CVS:
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/base/gstbasesrc.c: (gst_base_src_query_latency),
(gst_base_src_default_query), (gst_base_src_get_range):
* libs/gst/base/gstbasesrc.h:
API: gst_base_src_query_latency(). Added method so that subclasses can
easily get the latency values of the base source class.
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
* gst/gsturi.c: (get_element_factories_from_uri_protocol),
(gst_uri_protocol_is_supported), (gst_element_make_from_uri):
* gst/gsturi.h:
API: Add gst_uri_protocol_is_supported(), which checks if an sink
or src that supports a given URI protocol exists.
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
* gst/gstbuffer.c: (gst_buffer_try_new_and_alloc):
* gst/gstbuffer.h:
* tests/check/gst/gstbuffer.c: (GST_START_TEST),
(gst_buffer_suite):
API: add gst_buffer_try_new_and_alloc() plus unit test (#431940).
Original commit message from CVS:
* configure.ac:
* docs/gst/gstreamer-sections.txt:
* gst/Makefile.am:
* gst/gstconfig.h.in:
* gst/gstobject.c: (gst_object_class_init),
(gst_signal_object_class_init):
* gst/gstobject.h:
2nd attempt to have a xml-less build as a joined effort of #413123
and #421480.
Original commit message from CVS:
Patch by: Marc-Andre Lureau <marcandre dot lureau at gmail dot com>
* gst/parse/Makefile.am:
* gst/parse/grammar.y:
* gst/parse/parse.l:
Make the parser reentrant and recursively callable. This requires flex
>= 2.5.31, for older versions pregenerated sources are used as we
can't bump the build dependency. Finally fixes#349180.
* gst/gstparse.c: (gst_parse_launch):
Drop the HAVE_MT_SAVE_FLEX #ifdefs as we always use a new enough flex
now anyway.
* docs/gst/Makefile.am:
* docs/gst/Makefile.am:
* gst/parse/grammar.tab.pre.c: (__gst_parse_strdup),
(__gst_parse_strfree), (__gst_parse_link_new),
(__gst_parse_link_free), (__gst_parse_chain_new),
(__gst_parse_chain_free), (SET_ERROR), (YYPRINTF),
(gst_parse_element_set), (gst_parse_free_link),
(gst_parse_found_pad), (gst_parse_perform_delayed_link),
(gst_parse_perform_link), (yytnamerr), (yysyntax_error), (yyerror),
(_gst_parse_launch):
* gst/parse/grammar.tab.pre.h:
* gst/parse/lex._gst_parse_yy.pre.c: (PRINT), (yy_get_next_buffer),
(yy_get_previous_state), (yy_try_NUL_trans), (input),
(_gst_parse_yyrestart), (_gst_parse_yy_switch_to_buffer),
(_gst_parse_yy_load_buffer_state), (_gst_parse_yy_create_buffer),
(_gst_parse_yy_delete_buffer), (_gst_parse_yy_init_buffer),
(_gst_parse_yy_flush_buffer), (_gst_parse_yypush_buffer_state),
(_gst_parse_yypop_buffer_state),
(_gst_parse_yyensure_buffer_stack), (_gst_parse_yy_scan_buffer),
(_gst_parse_yy_scan_string), (_gst_parse_yy_scan_bytes),
(yy_fatal_error), (_gst_parse_yyget_extra),
(_gst_parse_yyget_lineno), (_gst_parse_yyget_column),
(_gst_parse_yyget_in), (_gst_parse_yyget_out),
(_gst_parse_yyget_leng), (_gst_parse_yyget_text),
(_gst_parse_yyset_extra), (_gst_parse_yyset_lineno),
(_gst_parse_yyset_column), (_gst_parse_yyset_in),
(_gst_parse_yyset_out), (_gst_parse_yyget_debug),
(_gst_parse_yyset_debug), (_gst_parse_yyget_lval),
(_gst_parse_yyset_lval), (_gst_parse_yylex_init),
(yy_init_globals), (_gst_parse_yylex_destroy), (yy_flex_strncpy),
(yy_flex_strlen), (_gst_parse_yyalloc), (_gst_parse_yyrealloc),
(_gst_parse_yyfree):
If the installed flex version is too old use pre-generated parser
sources. These pre-generated parser sources are always updated when
the actual flex/bison sources change but require everybody who wants
to change something in the parser to have flex >= 2.5.31 installed.
Original commit message from CVS:
* docs/libs/gstreamer-libs-sections.txt:
Remove bogus addition for API I didn't end up keeping.
* libs/gst/base/gstbasesrc.h:
Mention Since: 0.10.13 in the documentation.
Add the API keyword to the previous ChangeLog entry.
Original commit message from CVS:
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/base/gstbasesrc.c: (gst_base_src_class_init),
(gst_base_src_default_prepare_seek_segment),
(gst_base_src_prepare_seek_segment), (gst_base_src_perform_seek):
* libs/gst/base/gstbasesrc.h:
Allow basesrc derived classes to execute seeks in other formats
by providing a prepare_seek_segment vmethod. Sub-classes can choose
to prepare the GstSegment in any format that their perform_seek method
will be able to understand. The default implementation provides the
old behaviour of attempting to convert the seek offsets to the
configured native format.
Original commit message from CVS:
* docs/faq/gst-uninstalled:
don't get empty paths on the PATH variables
* gst/gstpad.c (gst_pad_is_active, gst_pad_set_blocked_async):
Don't format for the uncommon terminal width of 84 characters.
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
* gst/gstclock.c: (gst_clock_adjust_unlocked),
(gst_clock_unadjust_unlocked), (gst_clock_set_calibration):
* gst/gstclock.h:
Improve _adjust_unlocked() so that it overflows less.
Add gst_clock_unadjust_unlocked to convert from external time to
internal time based on calibration.
Add some more debug.
API: GstClock::gst_clock_unadjust_unlocked()
Original commit message from CVS:
* docs/random/ensonic/dynlink.txt:
More work on proposal for new core api.
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/base/gstbasetransform.h:
API: GST_BASE_TRANSFORM_LOCK/UNLOCK added
* libs/gst/controller/gstcontroller.c:
(on_object_controlled_property_changed),
(gst_controller_sync_values),
(gst_controller_set_interpolation_mode):
* libs/gst/controller/gstcontroller.h:
Less verbose logging add docs for unimplemented parts and correctly
return when using unavailable parts.
Original commit message from CVS:
* docs/design/draft-klass.txt:
Add example that needs more thinking.
* docs/design/draft-missing-plugins.txt:
More thoughts about wtrapper plugins.
* docs/random/ensonic/embedded.txt:
* docs/random/ensonic/profiling.txt:
More design work.
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
Add new element field and method.
* gst/gstbin.c: (gst_bin_class_init), (gst_bin_init),
(bin_remove_messages), (gst_bin_add_func), (gst_bin_remove_func),
(gst_bin_recalc_state), (gst_bin_get_state_func),
(gst_bin_element_set_state), (gst_bin_change_state_func),
(gst_bin_continue_func), (bin_bus_handler),
(bin_push_state_continue), (bin_handle_async_start),
(bin_handle_async_done), (gst_bin_handle_message_func):
Make async state changes a bit smarter by using new ASYNC_START and
ASYNC_DONE messages. This reduces the number of times we run the state
recalculation thread.
Don't change state of element with a pending ASYNC_START message.
Deprecate STATE_DIRTY messages.
* gst/gstelement.c: (gst_element_init), (gst_element_send_event),
(gst_element_get_state_func), (gst_element_continue_state),
(gst_element_lost_state), (gst_element_set_state_func),
(gst_element_change_state):
* gst/gstelement.h:
Keep the state that was last set by the app in a new element field.
Don't allow state changes when handling an element event.
Post ASYNC_START and ASYNC_DONE messages.
Change lost_state so that we go to PAUSED and wait for the parent to set
us to PLAYING again (so latency calculation can be performed)
Export gst_element_change_state() method so that subclasses can use it.
API: gst_element_change_state()
API: GST_STATE_TARGET
* gst/gstpipeline.c: (gst_pipeline_class_init),
(reset_stream_time), (gst_pipeline_change_state),
(gst_pipeline_handle_message), (gst_pipeline_set_new_stream_time):
Using the new ASYNC_START message we can reset the base_time when
needed. This can then be used to implement base_time redistribution in
flushing seeks so that we can remove the explicit seek handling.
Perform latency query and configuration when going to PLAYING.
* libs/gst/base/gstbasesink.c: (gst_base_sink_commit_state),
(gst_base_sink_query), (gst_base_sink_change_state):
Post new ASYNC_START/ASYNC_DONE messages.
* tests/check/generic/sinks.c: (GST_START_TEST):
Fix test because the bin will not set the async element to PLAYING right
away.
* tests/check/gst/gstbin.c: (pop_async_done), (GST_START_TEST):
Make the message check a little stronger.
Handle ASYNC messages.
* tests/check/pipelines/cleanup.c: (GST_START_TEST):
* tests/check/pipelines/simple-launch-lines.c: (GST_START_TEST):
Expect ASYNC_DONE messages.
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
* gst/gstmessage.c: (gst_message_new_async_start),
(gst_message_new_async_done), (gst_message_parse_info),
(gst_message_parse_async_start):
* gst/gstmessage.h:
Add ASYNC_START and ASYNC_DONE messages to prepare for latency
support.
Original commit message from CVS:
* docs/design/draft-tagreading.txt:
* docs/random/ensonic/audiobaseclasses.txt:
Do some Architect work.
* gst/gstobject.c: (gst_object_set_name):
Add a WARNING.
* gst/gstpad.c:
Add docs that point from gst_pad_get_range to gst_pad_pull_range
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_sink_eventfunc),
(gst_base_transform_handle_buffer), (gst_base_transform_chain),
(gst_base_transform_activate):
* libs/gst/base/gstbasetransform.h:
Add support for dropping buffers with custom GstFlowReturn.
Set DISCONT flags on outgoing buffers based on QoS, incomming DISCONT
buffers or dropped buffers.
* docs/libs/gstreamer-libs-sections.txt:
docs for new custom return code.
* plugins/elements/gstidentity.c: (gst_identity_transform_ip):
Use drop support in base class to implement drop-probability.
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
* gst/gstbus.c: (gst_bus_init), (gst_bus_dispose), (gst_bus_post),
(gst_bus_timed_pop), (gst_bus_pop):
* gst/gstbus.h:
API: gst_bus_timed_pop()
Implement gst_bus_timed_pop() to do a blocking timed wait for a
message to arrive on the bus.
* tests/check/gst/gstbus.c: (GST_START_TEST), (pop_thread),
(gst_bus_suite):
Two unit tests for new _timed_pop() function.
Original commit message from CVS:
* docs/design/Makefile.am:
* docs/design/draft-missing-plugins.txt:
* docs/random/draft-missing-plugins.txt:
Some small updates: update plugin system identifier prefix
('gstreamer.net' to 'gstreamer'), mention our new install
API in libgstbaseutils rather than libgimme-codec, add
reference to the online docs.
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
* gst/gstelement.h:
Fix up documentation to link to the correct GstGError section.
Add GST_ELEMENT_INFO macro since someone else added a Info message.
Original commit message from CVS:
* docs/design/part-gstghostpad.txt:
* gst/gstghostpad.c: (gst_ghost_pad_dispose),
(gst_ghost_pad_new_full):
Make the ghostpad a parent of the internal pad again for better backward
compatibility. Don't write code that relies on this however.
* gst/gstpad.c: (gst_pad_activate_pull), (gst_pad_activate_push),
(gst_pad_link_check_hierarchy):
Require that parents should be GstElements in the hierarchy check.
Original commit message from CVS:
* docs/design/part-gstghostpad.txt:
* gst/gstghostpad.c: (gst_ghost_pad_class_init),
(gst_ghost_pad_internal_do_activate_push),
(gst_ghost_pad_internal_do_activate_pull),
(gst_ghost_pad_do_activate_push), (gst_ghost_pad_do_activate_pull),
(gst_ghost_pad_do_link), (gst_ghost_pad_dispose),
(gst_ghost_pad_new_full), (gst_ghost_pad_set_target):
Do not set the internal pad as a parent anymore so we can avoid
hierarchy linking errors when the ghostpad has no parent yet. This also
fixes failed activation because of unlinked internal pads, which in
turn fixes the impossible case where you have to activate a pad before
you can add it to a running element.
Also fix the docs.
* gst/gstpad.c: (pre_activate), (post_activate),
(gst_pad_set_active), (gst_pad_activate_pull),
(gst_pad_activate_push), (gst_pad_check_pull_range):
Add some more debug info.
Mark activation mode in pre_activate so that we don't try to activate in
endless loops. Fixes#385084.
Original commit message from CVS:
* docs/design/part-seeking.txt:
Some small update.
* gst/gstsegment.c: (gst_segment_set_seek):
Revert old bogus change that should make seeking work again.
Original commit message from CVS:
* docs/random/ensonic/dynlink.txt:
* docs/random/ensonic/interfaces.txt:
* docs/random/ensonic/receipies.txt:
Possible dynamic reconnection api, plus some type fixes the other two
docs.
Original commit message from CVS:
* docs/design/draft-klass.txt:
Add existing category analysis.
* gst/gstcaps.c:
Fix doc example, framerate is a fraction.
Original commit message from CVS:
* docs/design/draft-latency.txt:
Small update.
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/base/gstbasesink.c: (gst_base_sink_class_init),
(gst_base_sink_get_latency), (gst_base_sink_query_latency),
(gst_base_sink_wait_clock), (gst_base_sink_send_qos),
(gst_base_sink_perform_qos), (gst_base_sink_queue_object_unlocked),
(gst_base_sink_chain_unlocked), (gst_base_sink_send_event),
(gst_base_sink_get_position), (gst_base_sink_query),
(gst_base_sink_change_state):
* libs/gst/base/gstbasesink.h:
API: gst_base_sink_query_latency() to let subclasses query the upstream
latency.
API: gst_base_sink_get_latency() to let subclasses query the configured
latency in the sink.
Implement query and set latency.
Update some docs.
As spotted by Will Newton <will dot newton at gmail dot com>: Make sure we
don't continue preroll when we are flushing. Fixes#405284.
* tests/check/pipelines/stress.c: (change_state_timeout),
(quit_timeout), (GST_START_TEST), (stress_suite):
Test for #405284.
