Commit graph

18557 commits

Author SHA1 Message Date
Aaron Boxer
46989dca96 documentation: fix a number of typos 2019-10-05 22:38:11 +00:00
Simon Arnling Bååth
8173596ed2 gstrtpjitterbuffer: Custom messages when dropping packets
This commit adds custom element messages for when gstrtpjitterbuffer
drops an incoming rtp packets due to for example arriving too late.
Applications can listen to these messages on the bus which enables
actions to be taken when packets are dropped due to for example high
network jitter.

Two properties has been added, one to enable posting drop messages and
one to set a minimum time between each message to enable throttling the
posting of messages as high drop rates.
2019-10-04 20:31:56 +00:00
Thibault Saunier
a55576d1fd qtdemux: Specify REDIRECT information in error message
There are in the wild (mp4) streams that basically contain no tracks
but do have a redirect info[0], in which case, we won't be able
to expose any pad (there are no tracks) so we can't post anything but
an error on the bus, as:

- it can't send EOS downstream, it has no pad,
- posting an EOS message will be useless as PAUSED state can't be
  reached and there is no sink in the pipeline meaning GstBin will
  simply ignore it

The approach here is to to add details to the ERROR message with a
`redirect-location` field which elements like playbin handle and use right
away.

[0]: http://movietrailers.apple.com/movies/paramount/terminator-dark-fate/terminator-dark-fate-trailer-2_480p.mov
2019-09-30 12:15:43 -03:00
Olivier Crête
a24596423a rtpjitterbuffer: Cancel timers instead of just unlocking loop thread
When the queue is full (and adding more packets would risk a seqnum
roll-over), the best approach is to just start pushing out packets
from the other side.  Just pushing out the packets results in the
timers being left hanging with old seqnums, so it's safer to just
execute them immediately in this case. It does limit the timer space
to the time it takes to receiver about 32k packets, but without
extended sequence number, this is the best RTP can do.

This also results in the test no longer needed to have timeouts or
timers as pushing packets in drives everything.

Fixes #619
2019-09-28 07:47:54 -04:00
Nicolas Dufresne
4a9f42430a rtpjitterbuffer: Optimize offset update
As we are applying the same offset over all timers, there timer
ordering won't change, so we can safely skip time-reordering.
2019-09-27 17:34:04 -04:00
Nicolas Dufresne
af1c586c7b rtptimerqueue: Optimize reschedule optations
This basically add ability to choose between inserting from head, tail
or in-place in order to try and minimize the distance to walk through in
the timer queue. This removes an overhead we had seen on high drop rate.
2019-09-27 17:34:04 -04:00
Nicolas Dufresne
1897c1fbe6 rtpjitterbuffer: Fix a typo in comment 2019-09-27 17:34:04 -04:00
Nicolas Dufresne
9ebcadb349 rtpjitterbuffer: Don't use stats timer on the timers queue
The timer passed to update_timers may be from the stats timer. At the
moment, we could endup rescheduling (reusing) that timer onto the normal
timer queue, unschedul it as if it was from the normal timer queue or
duplicate it into the stats timer queue again. This was protected before
as the with the fact the stats timer didn't have a valid idx.
2019-09-27 17:34:04 -04:00
Nicolas Dufresne
81bffb5e5c rtpjitterbuffer: Update timers on ts-offset changes
As the offset is already applied now, we need to update and reschedule
all timers each time the offset is changed. I'm not sure who expect this
to be retro-actively applied, but there was a unit test for it.
2019-09-27 17:34:04 -04:00
Nicolas Dufresne
d4c6c335c5 rtpjitterbuffer: No need to wake the timer thread on head changes
If the jitterbuffer head change, there is no need to systematically
wakeup the timer thread. The timer thread will be waken up on if
an earlier timeout has been pushed. This prevent some more spurious
wakeup when the system is loaded. As a side effect, cranking the clock
may set the clock at an earlier position.
2019-09-27 17:34:04 -04:00
Nicolas Dufresne
36771b75e9 rtpjittterbuffer: Port timers array to RtpTimerQueue
In this patch we now make use of the new RtpTimerQueue instead of the
old GArray. This required a lot of changes all over the place, some of
the important changes are that `timer->timeout` is no longer a PTS but
the actual timeout. This was required to get the RtpTimerQueue sorting
right. The applied offset is saved as `timer->offset`, this allow
retreiving back the PTS when needed.

The clockid updates only happens once per incoming packet. If the
currently schedule timer is before the earliest timer in the queue, we
no longer wakeup the thread. This way, if other timers get setup in the
meantime, this will reduce the number of wakup.

The timer loop code has been mostly rewritten, though the behaviour of
running the lost timers first has been kept (even though there is no
test to show what would be the side effect of doing this differently).

Fixes #608
2019-09-27 17:34:04 -04:00
Nicolas Dufresne
d4b2231de2 rtpjittterbuffer: Port from TimerQueue to RtpTimerQueue 2019-09-27 17:34:04 -04:00
Nicolas Dufresne
f5e3280dbe rtpjitterbuffer: Port use the new RtpTimer structure
First iteration toward porting to the new timer queue.
2019-09-27 17:34:04 -04:00
Nicolas Dufresne
37742cd36d rtptimerqueue: Consolidate a data structure for timers
Implement a single timer queue for all timers. The goal is to always use
ordered queues for storing timers. This way, extracting timers for
execution becomes O(1). This also allow separating the clock wait
scheduling from the timer itself and ensure that we only wake up the
timer thread when strictly needed.

The knew data structure is still O(n) on insertions and reschedule,
but we now use proximity optimization so that normal cases should be
really fast. The GList structure is also embeded intot he RtpTimer
structure to reduce the number of allocations.
2019-09-27 17:34:04 -04:00
Nicolas Dufresne
a53ffb6e11 tests: jitterbuffer: Demacroify some helpers
There is no reason for these to be macros anymore. This makes the
test helper much more readable.
2019-09-27 13:02:16 -04:00
Nicolas Dufresne
c917f11ae8 rtpjitterbuffer: Move item structure outside of the element
This moves the RtpJitterBufferStructure type, alloc, free into
rtpjitterbuffer.c/h implementation. jitterbuffer.c strictly rely on
the fact this structure is compatible with GList, and so it make more
sense to keep encapsulate it. Also, anything that could possibly
reduce the amount of code in the element is a win.

In order to support that move, a function pointer to free the data
was added. This also allow making the free function option when
flushing the jitterbuffer.
2019-09-27 13:02:16 -04:00
Nicolas Dufresne
9b706b6220 rtpjitterbuffer: Constify timer pointers where possible
This helps understanding which function modify the Timerdata
and which one does not. This is not always obvious from thelper
name considering recalculate_timer() does not.
2019-09-27 13:02:16 -04:00
Philipp Zabel
5c8d8723d2 v4l2: Add MPEG-2 profile and level support
Add support for V4L2 MPEG-2 decoders reporting supported profiles and
levels.
2019-09-27 08:47:20 +02:00
Philipp Zabel
2b1658fca2 v4l2object: add support for ABGR, xBGR, RGBA, and RGBx formats
Map them to the new V4L2_PIX_FMT_{BGRA32,BGRX32,RGBA32,RGBX32} pixel
formats.
2019-09-25 10:44:13 +02:00
Philipp Zabel
06a084d70c v4l2: update kernel headers to latest from media tree
Update to the latest installed headers (output of make headers_install)
from the media tree, keeping the slight modifications to the includes.

This includes typo fixes in enum v4l2_mpeg_video_multi_slice_mode,
MPEG-2 level and profile enums, new FWHT and H.264 Qp controls, new
RGB(A) formats, and new continuous bytestream and dynamic resolution
format flags.
2019-09-25 10:44:13 +02:00
Mathieu Duponchelle
b5e414cdc2 rtpbin: add request-jitterbuffer signal
This can be used to pass the threadsharing jitterbuffer from
gst-plugins-rs for example.
2019-09-24 15:33:21 +00:00
Matthew Waters
5ffd733317 build: fix werror build with newer gcc
In file included from ../../../../dist/linux_x86_64/include/gstreamer-1.0/gst/gst.h:55,
                 from ../../../../dist/linux_x86_64/include/gstreamer-1.0/gst/tag/tag.h:25,
                 from ../gst/isomp4/qtdemux.c:56:
In function ‘qtdemux_inspect_transformation_matrix’,
    inlined from ‘qtdemux_parse_trak’ at ../gst/isomp4/qtdemux.c:10676:5,
    inlined from ‘qtdemux_parse_tree’ at ../gst/isomp4/qtdemux.c:14210:5:
../../../../dist/linux_x86_64/include/gstreamer-1.0/gst/gstinfo.h:645:5: error: ‘%s’ directive argument is null [-Werror=format-overflow=]
  645 |     gst_debug_log ((cat), (level), __FILE__, GST_FUNCTION, __LINE__, \
      |     ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  646 |         (GObject *) (object), __VA_ARGS__);    \
      |         ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../../../../dist/linux_x86_64/include/gstreamer-1.0/gst/gstinfo.h:1062:35: note: in expansion of macro ‘GST_CAT_LEVEL_LOG’
 1062 | #define GST_DEBUG_OBJECT(obj,...) GST_CAT_LEVEL_LOG (GST_CAT_DEFAULT, GST_LEVEL_DEBUG,   obj,  __VA_ARGS__)
      |                                   ^~~~~~~~~~~~~~~~~
../gst/isomp4/qtdemux.c:10294:5: note: in expansion of macro ‘GST_DEBUG_OBJECT’
10294 |     GST_DEBUG_OBJECT (qtdemux, "Transformation matrix rotation %s",
      |     ^~~~~~~~~~~~~~~~
../gst/isomp4/qtdemux.c: In function ‘qtdemux_parse_tree’:
../gst/isomp4/qtdemux.c:10294:64: note: format string is defined here
10294 |     GST_DEBUG_OBJECT (qtdemux, "Transformation matrix rotation %s",
      |                                                                ^~
2019-09-23 18:46:16 +10:00
Sebastian Dröge
d7738da285 qtmux: Use the new helper functions for mapping the colr atom values to colorimetry 2019-09-18 18:32:02 +03:00
Sebastian Dröge
5d4a46aa63 qtdemux: Use the new helper functions for mapping the colr atom values to colorimetry 2019-09-18 18:29:27 +03:00
Mathieu Duponchelle
505c88eeb6 docs: update plugin cache 2019-09-10 20:52:17 +00:00
Mathieu Duponchelle
eeccb330d0 smpte: don't register transition types twice 2019-09-10 20:52:17 +00:00
Doug Nazar
42dea672fa alpha: Fix one_over_kc calculation
On arm/aarch64, converting from float directly to unsigned int uses
a different opcode and negative numbers result in 0. Cast to
signed int first.
2019-09-09 00:51:53 -04:00
Jan Schmidt
31be44c47f splitmux: Add muxer-pad-map property
Add a property which explicitly maps splitmuxsink pads to the
muxer pads they should connect to, overriding the implicit logic
that tries to match pads but yields arbitrary names.
2019-09-06 12:38:56 +00:00
Jan Schmidt
8ec695e55d splitmuxsink: In async mode, retain previous muxer pad names.
When running in async-finalize mode, request new pads from the muxer
using the same names as old pads, instead of letting the muxer assign
new ones based on the pad template name.
2019-09-06 12:38:56 +00:00
Jan Schmidt
83ef7a6d1c splitmuxsink: Mark split-* signals as action signals. Doc fixes.
Add the G_SIGNAL_ACTION flag to the split-* signals on splitmuxsink,
and make some improvements to their docstrings
2019-09-06 12:38:56 +00:00
Seungha Yang
2ef74f2c81 qtmux: Fix incompatible type warning with MSVC
gstqtmux.c(5582): warning C4133: 'function':
  incompatible types - from 'GstVideoMultiviewFlags *' to 'guint *'
2019-09-02 15:07:17 +00:00
Mathieu Duponchelle
c5e8a8f320 rtspsrc: fix git diff indentation 2019-09-02 16:33:05 +02:00
Mathieu Duponchelle
3bc5d3d3b5 rtspsrc: normalize variable to boolean 2019-08-30 22:42:58 +02:00
Mathieu Duponchelle
37eca8a12c rtspsrc: clip output segment on accurate seeks
The output segment is only used in ONVIF mode.

The previous behaviour was to output a segment computed from
the Range response sent by the server.

In ONVIF mode, servers will start serving from the appropriate
synchronization point (keyframe), and the Range in response will
start at that position.

This means rtspsrc can now perform truly accurate seeks in that
mode, by clipping the output segment to the values requested in
the seek. The decoder will then discard out of segment buffers
and playback will start without artefacts at the exact requested
position, similar to the behaviour of a demuxer when an accurate
seek is requested.
2019-08-30 14:50:21 +00:00
Matthew Waters
0017115494 vpx: fix macos werror build
../ext/vpx/gstvpxenc.c:1723:49: error: format specifies type 'long' but the argument has type 'vpx_codec_pts_t' (aka 'long long') [-Werror,-Wformat]
          ", gst frame pts: %" G_GINT64_FORMAT, pkt->data.frame.pts, pts);
          ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
/Library/Frameworks/GStreamer.framework/Versions/1.0/include/gstreamer-1.0/gst/gstinfo.h:1065:96: note: expanded from macro 'GST_TRACE_OBJECT'
#define GST_TRACE_OBJECT(obj,...)       GST_CAT_LEVEL_LOG (GST_CAT_DEFAULT, GST_LEVEL_TRACE,   obj,  __VA_ARGS__)
                                        ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~
/Library/Frameworks/GStreamer.framework/Versions/1.0/include/gstreamer-1.0/gst/gstinfo.h:646:31: note: expanded from macro 'GST_CAT_LEVEL_LOG'
        (GObject *) (object), __VA_ARGS__);                             \
                              ^~~~~~~~~~~
../ext/vpx/gstvpxenc.c:1723:70: error: format specifies type 'long' but the argument has type 'vpx_codec_pts_t' (aka 'long long') [-Werror,-Wformat]
          ", gst frame pts: %" G_GINT64_FORMAT, pkt->data.frame.pts, pts);
          ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~
/Library/Frameworks/GStreamer.framework/Versions/1.0/include/gstreamer-1.0/gst/gstinfo.h:1065:96: note: expanded from macro 'GST_TRACE_OBJECT'
#define GST_TRACE_OBJECT(obj,...)       GST_CAT_LEVEL_LOG (GST_CAT_DEFAULT, GST_LEVEL_TRACE,   obj,  __VA_ARGS__)
                                        ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~
/Library/Frameworks/GStreamer.framework/Versions/1.0/include/gstreamer-1.0/gst/gstinfo.h:646:31: note: expanded from macro 'GST_CAT_LEVEL_LOG'
        (GObject *) (object), __VA_ARGS__);                             \
                              ^~~~~~~~~~~
2019-08-30 14:12:29 +10:00
Matthew Waters
b0522aa8f7 osxvideosink: call superclass in reshape
Fixes macos werror build

../sys/osxvideo/cocoawindow.m:437:1: error: method possibly missing a [super reshape] call [-Werror,-Wobjc-missing-super-calls]
}
^
2019-08-30 14:12:29 +10:00
Mathieu Duponchelle
3429ddde38 docstrings: port ulinks to markdown links 2019-08-23 18:56:01 +02:00
Tim-Philipp Müller
0dc9e5bff8 replaygain: fix up doc links to defunct replaygain.org website
Fixes #624
2019-08-23 13:12:39 +03:00
Seungha Yang
53dc1da870 souphttpsrc: Fix incompatible type build warning
gstsouphttpsrc.c(2191): warning C4133:
  '=': incompatible types - from 'guint (__cdecl *)(GType)' to 'GstURIType (__cdecl *)(GType)'
2019-08-21 15:20:56 +00:00
Tim-Philipp Müller
61bd613de3 vpx: bump libvpx requirement to 1.5.0
Was released in Nov 2015.
2019-08-19 11:09:47 +01:00
Tim-Philipp Müller
e40ba71824 vpx: avoid confusing meson configure output when checking for vpx versions
Used to print:
|Run-time dependency vpx found: YES 1.7.0
|Message: libvpx provides VP8 encoder interface (vpx_codec_vp8_cx_algo)
|Message: libvpx provides VP8 decoder interface (vpx_codec_vp8_dx_algo)
|Message: libvpx provides VP9 encoder interface (vpx_codec_vp9_cx_algo)
|Message: libvpx provides VP9 decoder interface (vpx_codec_vp9_dx_algo)
|Dependency vpx found: YES (cached)
|Dependency vpx found: NO found '1.7.0' but need: '>=1.8.0'
|Run-time dependency vpx found: NO (tried pkgconfig and cmake)

We can check the version of the found dep in a way that
doesn't produce this confusing output.
2019-08-19 11:09:19 +01:00
Amr Mahdi
cbe61c4ff5 wavparse: Fix push mode ignoring audio with a size smaller than segment buffer
In push mode (streaming), if the audio size is smaller than segment buffer size, it would be ignored.
This happens because when the plugin receives an EOS signal while a single audio chunk that is less than the segment buffer size is buffered, it does not
flush this chunk. The fix is to flush the data chunk when it receives an EOS signal and has a single (first) chunk buffered.

How to reproduce:
1. Run gst-launch with tcp source
```
gst-launch-1.0  tcpserversrc port=3000 !  wavparse ignore-length=0 ! audioconvert ! filesink location=bug.wav
```
2. Send a wav file with unspecified data chunk length (0). Attached a test file
```
cat test.wav | nc localhost 3000
```
3. Compare the length of the source file and output file
```
ls -l test.wav bug.wav
-rw-rw-r-- 1 amr amr    0 Aug 15 11:07 bug.wav
-rwxrwxr-x 1 amr amr 3564 Aug 15 11:06 test.wav
```

The expected length of the result of the gst-lauch pipeline should be the same as the test file minus the headers (44), which is ```3564 - 44 = 3520``` but the actual output length is ```0```

After the fix:
```
ls -l test.wav fix.wav
-rw-rw-r-- 1 amr amr 3520 Aug 15 11:09 fix.wav
-rwxrwxr-x 1 amr amr 3564 Aug 15 11:06 test.wav
```
2019-08-19 07:30:17 +00:00
Sebastian Dröge
2a4d0a9b09 rtpvp8depay: Add property for waiting until the next keyframe after packet loss
If VP8 is not encoded with error resilience enabled then any packet loss
causes very bad artefacts when decoding and waiting for the next
keyframe instead improves user experience considerably.
2019-08-12 17:10:20 +00:00
Nicolas Dufresne
45b6514f33 v4l2: Fix type compatibility issue with glibc 2.30
From now on, we will use linux/types.h on Linux, and use typedef of the
various flavour of BSD.

Fixes #635
2019-08-10 11:01:26 +01:00
Mathieu Duponchelle
e58ca79741 valgrind: suppress Cond error coming from gnutls
taken from fb4a8dda21
2019-08-08 14:39:17 +00:00
Mart Raudsepp
67958ccce8 matroska: Provide audio lead-in for some lossy formats
Various audio formats require an audio lead-in to decode it properly.
Most parsers would take care of it, but when a container like matroska is
involved, the demuxer handles the seeking and without its own lead-in
handling would never even pass the lead-in data to the parser.
This commit provides an initial implementation of that for audio/mpeg,
audio/x-ac3 and audio/x-eac3 by calculating the worst case lead-in time
needed from known samplerate, potential lead-in frames need and the
maximum blocksize possible for the format (as we don't parse that out
exactly in matroskademux) and seeking that much earlier in case of
accurate seeks. This is especially important for NLE use-cases with GES.

If accurate seeking to a position that happens to have a video keyframe,
it'll go back to the previous keyframe than needed, but with typical
video files that's the best we can do anyway without falling back to
scanning the clusters, as typically only keyframes are indexed in
Cueing Data.
If the media doesn't have a CUE, then we bisect for the cluster to seek
to with the same modified time as well in case of accurate seeking,
ensuring sufficient lead-in. This code path is typically hit only with
(suboptimal) audio-only matroska files, e.g. when created with ffmpeg,
which doesn't add a CUE for audio-only mkv muxing.
2019-08-07 18:51:57 -04:00
Antonio Ospite
1c5c90ea23 test: rtpbin_buffer_list: add a test for invalid packets in buffer list
Upstream elements can send all kinds of data in a buffer list, so cover
the case of an invalid RTP packet mixed with valid RTP packets.
2019-08-07 15:32:30 -04:00
Antonio Ospite
12b420168c test: rtpbin_buffer_list: add a test for multiplexed RTP and RTCP
RTP and RTCP packets can be muxed together on the same channel (see
RFC5761) and can arrive in the same buffer list.

The GStreamer rtpsession element support RFC5761, so add a test to cover
this case for buffer lists too.
2019-08-07 15:32:30 -04:00
Antonio Ospite
6a5f38a325 test: rtpbin_buffer_list: add a test for different timestamps in buffer list
Buffers with different timestamps (e.g. packets belonging to different
frames) can arrive together in the same buffer list,

Add a test to cover this case.
2019-08-07 15:32:30 -04:00
Antonio Ospite
b158be0d98 test: rtpbin_buffer_list: add function to check timestamp 2019-08-07 15:32:30 -04:00