In commit 6d11a00 were introduced a regression when gstreamer-vaapi is
compiled with out EGL/GLX support: it shall not support
GST_VAAPI_MAKE_GLTEXUPLOAD_CAPS.
This patch guards the inclusion of GST_VAAPI_MAKE_GLTEXUPLOAD_CAPS in the
allowed src caps for vaapedecode if EGL/GLX.
Just as vaapipostproc, VA decoder's context can be queried to get the possible
raw formats, so, the src caps can negotiate the exact caps that the context
supports.
In the spirit of the codec split, this patch removes the documentation of
vaapidecode and adds a page per each possible decoder.
Nonetheless, only those available in the compilation system are going to be
instrospected, because the rest are not registered.
vaapidecode has a member named allowed_caps, but this name is not enough
explicit. This patch renames allowed_caps to allowed_sinkpad_caps.
No functional changes were included.
https://bugzilla.gnome.org/show_bug.cgi?id=773497
set_format() is called by upstream when the stream capabilites has changed.
Before, if the new stream is compatible with the old one the VA decoder was
not destroyed. Nonetheless, with this behavoir, the VA decoder ignores
when the upstreamer parsers gets more details of the stream, such as the
framerate. Hence, when the src caps are negotiates, the further sink caps
updates are ignored.
This patch forces the VA decoder destroying and recreation when set_format()
is called.
https://bugzilla.gnome.org/show_bug.cgi?id=770921
In order to register only the available decoders, this patch queries the
created test VA display, which uses the currently used back-end (X11, Wayland,
DRM, …) on the used display device.
https://bugzilla.gnome.org/show_bug.cgi?id=724352
Split the vaapidecode to all the supported codecs with the format
vaapi{codec}dec.
vaapidecode is stil registered as a GObject type, but not as a
GStreamer feature, so it can be used internally by vaapidecodebin without
changing its code too much.
https://bugzilla.gnome.org/show_bug.cgi?id=734093
Delay the GstVaapiDisplay instantiating until when changing the state from
READY to PAUSE. In this way the element has more chances to find an already
created GstVaapiDisplay, or a GL context, in the pipeline.
https://bugzilla.gnome.org/show_bug.cgi?id=766206
Since the driver checkup is done at registering, there is no need to do it
when changing the element state from NULL to READY. This patch remove this
vmethod from vaapidecode.
To avoid surface-exhausted situation during reverse playback,
drop frames except for key frame.
Also, to avoid the corruption of the parser state, flush() vmethod
doesn't destroy the VA decoder when playing in reverse.
https://bugzilla.gnome.org/show_bug.cgi?id=742922
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
The queue in GstVaapiDecode adds an extra reference to the frames. This patch
unref that extra reference earlier making the code simpler to follow.
https://bugzilla.gnome.org/show_bug.cgi?id=768652
Calling drain() vmethod means "decode any data it can at this point, but that
more data may arrive after". Hence, vaapidecode should check if there is data
in the output adapter and process them, without destroying the decoded picture
buffer (dpb).
Since this operation is done by gst_vaapidecode_internal_flush(), the operation
was refactored into a new function gst_vaapidecode_flush_output_adapter().
https://bugzilla.gnome.org/show_bug.cgi?id=768652
Calling flush() vmethod means "to flush all remaining data from the decoder
without pushing it downstream".
Nonetheless flush() is calling gst_vaapidecode_internal_flush(), which calls
gst_video_decoder_have_frame() if there is still something in the input
adapter, which may push buffers to downstream by calling handle_frame().
This patch changes this behavior by calling gst_vaapidecode_purge() rather
than gst_vaapidecode_internal_flush(), which does what we want: flushes the VA
decoder and releases all the rest of decoded frames.
https://bugzilla.gnome.org/show_bug.cgi?id=768652
If the backend driver vendor string is not in a white-list, and the
environment variable GST_VAAPI_ALL_DRIVERS is not set either, the decoder will
change it state from NULL to READY, hence the auto-plug mechanism will look
for another decoder.
This patch assumes the GstContext has already being shared along the pipeline
and the element has a valid GstVaapiDisplay instance.
https://bugzilla.gnome.org/show_bug.cgi?id=764673
In bug 757598 was added the set_context() vmethod chain up in
GstVaapiPluginBase. But it is buggy, since the parent_class address is
assigned to the last element which called gst_vaapi_plugin_base_class_init().
No error has shown up since none of the element's base classes redefined
set_context() vmethod from GstElement, so always the correct function was
called. Still this code is wrong and this patch make it right.
Since set_context() is the same code, a macro is used to implement that code
in all the gst-vaapi elements.
https://bugzilla.gnome.org/show_bug.cgi?id=765368
Instead of using the srcpad template caps for filtering the peer caps, the
function gst_vaapi_find_preferred_caps_feature(), now receives a new parameter
for the element's allowed caps.
With this modification, the vaapipostproc element simplifies a bit its code.
https://bugzilla.gnome.org/show_bug.cgi?id=765223
The native format parameter in gst_vaapi_find_preferred_caps_feature() can be
saved if the out format is used for both: in and out. Thus the code is more
readable.
https://bugzilla.gnome.org/show_bug.cgi?id=765223
If the downstream feature is system memory, the surface has to be mapped,
hence a warning message is logged saying that the driver has to do color
conversions. This might be troublesome because not all the color conversion
combinations are supported by the VA-API drivers, and there is not a reliable
way to know them before hand.
https://bugzilla.gnome.org/show_bug.cgi?id=765223
As decoded_info is assured to be valid when gst_vaapidecode_update_src_caps()
is called, then we don't need to verify or replace it with the sinkpad info
(reference state).
https://bugzilla.gnome.org/show_bug.cgi?id=764316
active, do_pool_renego and do_outstate_renego class variables were used to
indicate when negotiate downstream once, but now that each time a new surface
resolution is pop out a renegotation verified, these variable are not required
anymore.
https://bugzilla.gnome.org/show_bug.cgi?id=764316
When resolving bug 753914, a custom allocation query was added, overlapping
the responsibilities of GstVideoDecoder.
But with the merge of the patches from bug 764421 this overlapping was not
required anymore. This patch restores this situation setting the
allocation_caps in the GstVideoCodecState when needed.
https://bugzilla.gnome.org/show_bug.cgi?id=764316
The plugins should not expose the feature meta:GstVideoGLTextureUploadMeta in
their caps templates if they were not compiled either with GLX or EGL support.
The P010 video format is the native format used by the vaapi intel driver
for HEVCMain10 decode . Add support for planes and images of this video format.
https://bugzilla.gnome.org/show_bug.cgi?id=759181
After the decoding of first frame, try to extract the exact
decoded surface format using vaDeriveImage and keep this
as the format in decoded_info.
https://bugzilla.gnome.org/show_bug.cgi?id=753914
-- Maintaing decoded surface resoluton and actual display resoultion separately
-- Before pushing every frames downstream, check for the requirement of pool negoation and
output_state negotiation: This is needed to avoid multiple issuses with cropping,
multi-resoluton video handling, more complex multi resolution decode scenarios for vp9decode,
possible wrong behaviour from upstream element to report uncropped values etc. Due to these reasons,
We can't just reliably use the resolution change notification from libgstvaapi for pool renegotiation too.
This is slight overhead, but safe enough. Optimization could be possible though.
https://bugzilla.gnome.org/show_bug.cgi?id=753914
This will help to consoidate the out caps negotiation to a single place,
which will make the code simpler, allows to get the exact decoded format
if needed and the selected chroma type too.
https://bugzilla.gnome.org/show_bug.cgi?id=753914
Don't expose the the vaapidecode GType, instead expose a function
which will register element.
This is the first step to split the decoder by codecs.
https://bugzilla.gnome.org/show_bug.cgi?id=734093
In commit 6034734d I forgot to add the caps filter intersection in the
getcaps() vmethod generating a regression when a capsfilter is set in the
pipeline.
This commit adds the caps filter intersection.
The usage of getcaps() vmethod is preferred than to handle manually the sink's
caps query.
In order to avoid function declarations, this patch moves the class_init()
method to the end of the file.
As gstreamer-vaapi now only supports from GStreamer 1.6, this patch removes
all the old GStreamer version guards.
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
A caps query can occur before the element has a display. In that case, the
element can return its pad's template. But when the element already has a
display, and the caps probe fails, the element shall return an empty caps, so
the auto-plug could try with another decoder.
If the element has a display and the caps probe works, then the computed caps
should be returned.
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
https://bugzilla.gnome.org/show_bug.cgi?id=757598
Caps query can happen before the element has a bus. The display creation should
be should occur on the context negotiation, when the bus is already configured.
Then at caps query no display should be created.
Instead of force the display creation, we graciously fail the allowed_caps()
creation.
This change only applies for vaapidecode and vaapisink. The vaapipostroc, as a
basetransform descendant, seems to be not affected by this, nor the encoders.
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
https://bugzilla.gnome.org/show_bug.cgi?id=757598
The current context query handling design is flawed: the function
gst_vaapi_reply_to_query() returns FALSE either if the query is not a
GST_CONTEXT_QUERY of if the query could not be handled correctly. But the
pad query function should handle differently each case.
This patch changes the gst_vaapi_reply_to_query() for
gst_vaapi_handle_context_query() and changes it usage in all the vaapi plugins
to match the correct context query handling.
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
https://bugzilla.gnome.org/show_bug.cgi?id=757598
Though caps features are supported since GStreamer 1.2, there are some
issues with the features caps negotiation in that version. Nonetheless,
those issues are fixed in GStreamer 1.4. So, the memoy:VASurface caps
feature negotiation is relaxed for GStreamer 1.4.
The guard is the same as in vaapisink's caps template.
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
https://bugzilla.gnome.org/show_bug.cgi?id=756686
The received caps query will bring the already negotiated caps, so they are
not expected to change.
This patch removes this verification which is dead code path.
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
https://bugzilla.gnome.org/show_bug.cgi?id=756686
Instead of calling gst_vaapi_find_preferred_caps_feature(), which is
expensive, we check the caps from the allocation query, to check the
negotiated feature.
In order to do this verification a new utility function has been implemented:
gst_vaapi_caps_feature_contains().
As this new function shared its logic with gst_caps_has_vaapi_surface(), both
have been refactorized.
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
https://bugzilla.gnome.org/show_bug.cgi?id=756686
There is a regression from commit 3d8e5e. It was expected the buffer pool
allocation occur before the caps negotiation, but it is not.
This patch fixes this regression: the caps negotiation is done regardless the
allocation query from downstream.
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
https://bugzilla.gnome.org/show_bug.cgi?id=756686
gst_vaapi_decoder_state_changed() returns void. This patch fixes the
compilation where the toolchain uses restrictive flags as clang.
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
The use of gst_caps_is_always_compatible() for this optimization may lead to
false positives. It is better to stick to gst_caps_is_strictly_equal() to know
if it is required a re-negotiation.
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
https://bugzilla.gnome.org/show_bug.cgi?id=750835
Delaying the pool re-negotiation untill we push all decoded (and queued)
frames downstream. Otherwise for the multi-resolution videos, the
GstVideoVideoMemory will be having wrong resolution and which leads
to nasty behaviours, especially when using software renderers.
sample media file: RAP_B_Bossen_1.bin
case explained:
The first SPS Nal will report resoultion of 448x256 and having crop rectangles to
get the final resoultion 416x240.
Starting from 25 th frame, the resolution will change to 416x240. But parser
elements won't report this since the effective croped resolution is same in
both cases. Here the core libgstvaapi will detect this through it's internal
parsing and do all context/pool destory/reset stuffs. Also it will notify this
change to plugins in advance. But if the plugin try to do re-negotiaion of pool
immediately, this will not sync with the resolution of already decoded and queued
frames and which will lead to failure in gst_video_frame_map() in downstream(if we use the
software renderer). So we have to delay the pool renegotiation in vaapidecode,
untill we push all decoded frames downstream.
https://bugzilla.gnome.org/show_bug.cgi?id=753914
Currently we are sharing the input GstVideoCodecState with
GstVaapiDecoder(gst-libs/gst/vaapi) by just doing ref and unref for
each caps change. This is troublesome in many cases, for eg: if
resoultion changes with in a singe stream. Because, when ever there
is a resolution change, GstVideoDecoder will first change the Codec_state->caps
fields with new resolution, but since we are using the same codecstate (ref)
in gstvaapidecode.c, the caps check for input caps change will always fail.
https://bugzilla.gnome.org/show_bug.cgi?id=753914
Refactor the main vaapi caps strings into three macros:
GST_VAAPI_MAKE_SURFACE_CAPS, GST_VAAPI_MAKE_ENC_SURFACE_CAPS and
GST_VAAPI_MAKE_GLTEXUPLOAD_CAPS.
Those are in gstvaapipluginutil.h so all the elements could use them, instead
of re-declaring them every time.
No functional changes.
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
When seeking, the decoder is reset, but the buffer pool is not
re-negotiated, but in reset_full() the code forgets if the negotiated buffer
pool has the GLTextureUpload meta.
The decoder knows that GLTextureUpload meta was negotiated in
decide_allocation(), but this method is not called when seeking.
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
https://bugzilla.gnome.org/show_bug.cgi?id=752929
Add initial infrastructure in core codec library and vaapidecode to mark
corrupted frames as such. A corrupted frame is such a frame that was
reconstructed from invalid references for instance.
https://bugzilla.gnome.org/show_bug.cgi?id=751434
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
This is a naïve approach to the calculation of the VA-API decoding latency. It
takes into consideration when the frame-rate has some insane value.
https://bugzilla.gnome.org/show_bug.cgi?id=740419
Fix link when building plugin elements without HEVC support. e.g. don't
try to call into gst_vaapi_decoder_h265_set_alignment() if there is no
support HEVC enabled in libgstvaapi.
Also, drop disabled codecs from static template caps. Add the missing
HEVC static template caps into vaapidecodebin too.
This a cosmetic refactor: gst_vaapidecode_internal_flush() removes its only
label; gst_vaapidecode_finish() is more readable and gst_vaapidecode_purge()
shares the same error message of gst_vaapidecode_internal_flush() when flush
fails.
Add the method gst_vaapidecode_purge(). This method releases the
flushed frames from the decoder.
This new method add more readablity to gst_vaapidecode_destroy()
When a frame is rejected by downstream, the message is logged twice. This
patch removes one of those logging messages.
Also, the reject of a frame doesn't mean an alarming error. This patch demotes
the log message from error to info.
We get one reference when the frame is passed to decode_handle_frame()
and create another one in gst_vaapi_decoder_push_frame().
Usually the frame is handled in gst_vaapidecode_push_decoded_frame().
Here the frame is always released twice:
gst_video_decoder_finish_frame() + gst_video_codec_frame_unref() or
gst_video_decoder_drop_frame() + gst_video_codec_frame_unref().
In gst_vaapidecode_reset_full() both references to the frame must be
released as well.
Signed-off-by: Víctor Manuel Jáquez Leal <vjaquez@igalia.com>
https://bugzilla.gnome.org/show_bug.cgi?id=743226
The support for GStreamer 1.0 has been obsoleted in 0.5.10 release.
GStreamer 1.2 is the a minimal requirement for building the gstreamer-vaapi.
This patch removes all the pre-processor conditional code compilation guarded
for gstreamer-1.0.
Thus, all the video converters were removed too.
https://bugzilla.gnome.org/show_bug.cgi?id=745728
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Signed-off-by: Sreerenj Balachandran <sreerenj.balachandran@intel.com>
The purpose of gstcompat.h is to couple the API differences among
gstreamer-1.0 and gstreamer-0.10. Since gstreamer-0.10 is obsolete, the code
in this compatibility layer shall be removed.
Nevertheless, the gstcompat.h header should be kept, if new incompatibilites
appear in the future, but it shall live in gst/vaapi, not in gst-libs.
This patch removes the crumbs defined gstcompat.h and moves it to gst/vaapi.
In order to avoid layer violations, gstcompat.h includes sysdeps.h and all
the includes in gst/vaapi of sysdeps.h are replaced with gstcompat.h
https://bugzilla.gnome.org/show_bug.cgi?id=745728
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Signed-off-by: Sreerenj Balachandran <sreerenj.balachandran@intel.com>
