Original commit message from CVS:
* plugins/elements/gstmultiqueue.c: (gst_single_queue_free):
Don't leak GCond.
* tests/check/Makefile.am:
* tests/check/elements/.cvsignore:
* tests/check/elements/multiqueue.c: (setup_multiqueue),
(GST_START_TEST), (multiqueue_suite):
Add some dead simple unit tests for the 'multiqueue' element
(some bits don't work yet and are disabled for now).
Original commit message from CVS:
* tests/check/gst/gstsystemclock.c: (GST_START_TEST),
(mixed_thread), (mixed_async_cb), (gst_systemclock_suite):
Unref some more to make valgrind happy.
Original commit message from CVS:
* gst/gstsystemclock.c: (gst_system_clock_id_wait_jitter_unlocked),
(gst_system_clock_id_wait_jitter),
(gst_system_clock_id_wait_async), (gst_system_clock_id_unschedule):
Fix anoying regression that survived a few releases. When adding an
async entry while blocking on a sync entry, the sync entry will unblock
but still be busy, so it should continue to wait instead of returning
_BUSY to the app.
Add some comments here and there.
* tests/check/gst/gstsystemclock.c: (mixed_thread),
(mixed_async_cb), (GST_START_TEST), (gst_systemclock_suite):
Add testcase for this.
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
Add new element field and method.
* gst/gstbin.c: (gst_bin_class_init), (gst_bin_init),
(bin_remove_messages), (gst_bin_add_func), (gst_bin_remove_func),
(gst_bin_recalc_state), (gst_bin_get_state_func),
(gst_bin_element_set_state), (gst_bin_change_state_func),
(gst_bin_continue_func), (bin_bus_handler),
(bin_push_state_continue), (bin_handle_async_start),
(bin_handle_async_done), (gst_bin_handle_message_func):
Make async state changes a bit smarter by using new ASYNC_START and
ASYNC_DONE messages. This reduces the number of times we run the state
recalculation thread.
Don't change state of element with a pending ASYNC_START message.
Deprecate STATE_DIRTY messages.
* gst/gstelement.c: (gst_element_init), (gst_element_send_event),
(gst_element_get_state_func), (gst_element_continue_state),
(gst_element_lost_state), (gst_element_set_state_func),
(gst_element_change_state):
* gst/gstelement.h:
Keep the state that was last set by the app in a new element field.
Don't allow state changes when handling an element event.
Post ASYNC_START and ASYNC_DONE messages.
Change lost_state so that we go to PAUSED and wait for the parent to set
us to PLAYING again (so latency calculation can be performed)
Export gst_element_change_state() method so that subclasses can use it.
API: gst_element_change_state()
API: GST_STATE_TARGET
* gst/gstpipeline.c: (gst_pipeline_class_init),
(reset_stream_time), (gst_pipeline_change_state),
(gst_pipeline_handle_message), (gst_pipeline_set_new_stream_time):
Using the new ASYNC_START message we can reset the base_time when
needed. This can then be used to implement base_time redistribution in
flushing seeks so that we can remove the explicit seek handling.
Perform latency query and configuration when going to PLAYING.
* libs/gst/base/gstbasesink.c: (gst_base_sink_commit_state),
(gst_base_sink_query), (gst_base_sink_change_state):
Post new ASYNC_START/ASYNC_DONE messages.
* tests/check/generic/sinks.c: (GST_START_TEST):
Fix test because the bin will not set the async element to PLAYING right
away.
* tests/check/gst/gstbin.c: (pop_async_done), (GST_START_TEST):
Make the message check a little stronger.
Handle ASYNC messages.
* tests/check/pipelines/cleanup.c: (GST_START_TEST):
* tests/check/pipelines/simple-launch-lines.c: (GST_START_TEST):
Expect ASYNC_DONE messages.
Original commit message from CVS:
* tests/check/generic/states.c: (GST_START_TEST), (states_suite):
Copy the current generic/states example from -base and adapt so
we can use the exact same code everywhere.
Check a STATES_IGNORE_ELEMENTS env var which can be used
to ignore certain element factories for this test, which is
what is being done in -base
* tests/check/Makefile.am:
Mention this environment variable.
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
* gst/gstbus.c: (gst_bus_init), (gst_bus_dispose), (gst_bus_post),
(gst_bus_timed_pop), (gst_bus_pop):
* gst/gstbus.h:
API: gst_bus_timed_pop()
Implement gst_bus_timed_pop() to do a blocking timed wait for a
message to arrive on the bus.
* tests/check/gst/gstbus.c: (GST_START_TEST), (pop_thread),
(gst_bus_suite):
Two unit tests for new _timed_pop() function.
Original commit message from CVS:
* docs/design/draft-latency.txt:
Small update.
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/base/gstbasesink.c: (gst_base_sink_class_init),
(gst_base_sink_get_latency), (gst_base_sink_query_latency),
(gst_base_sink_wait_clock), (gst_base_sink_send_qos),
(gst_base_sink_perform_qos), (gst_base_sink_queue_object_unlocked),
(gst_base_sink_chain_unlocked), (gst_base_sink_send_event),
(gst_base_sink_get_position), (gst_base_sink_query),
(gst_base_sink_change_state):
* libs/gst/base/gstbasesink.h:
API: gst_base_sink_query_latency() to let subclasses query the upstream
latency.
API: gst_base_sink_get_latency() to let subclasses query the configured
latency in the sink.
Implement query and set latency.
Update some docs.
As spotted by Will Newton <will dot newton at gmail dot com>: Make sure we
don't continue preroll when we are flushing. Fixes#405284.
* tests/check/pipelines/stress.c: (change_state_timeout),
(quit_timeout), (GST_START_TEST), (stress_suite):
Test for #405284.
Original commit message from CVS:
2007-02-09 Andy Wingo <wingo@pobox.com>
* tests/check/pipelines/simple-launch-lines.c
(simple_launch_lines_suite, test_tee): Disable tee test until I
have time to fix it :-(
Original commit message from CVS:
2007-02-09 Andy Wingo <wingo@pobox.com>
* tests/check/Makefile.am (noinst_HEADERS):
* tests/check/libs/libsabi.c:
* tests/check/libs/struct_ppc32.h: Add ABI checks for PPC32.
* tests/check/gst/gstabi.c:
* tests/check/gst/struct_ppc32.h: Add ABI checks for PPC32.
Original commit message from CVS:
2007-02-09 Andy Wingo <wingo@pobox.com>
* tests/check/pipelines/simple-launch-lines.c (test_tee): Add
tests for push and pull tee behavior.
* plugins/elements/gsttee.h:
* plugins/elements/gsttee.c: Describe has-sink-loop better, and
mark as deprecated as well as unimplemented. It was a crack idea.
Add support for tee operating in pull mode, off by default.
Original commit message from CVS:
* tests/check/elements/filesrc.c: (GST_START_TEST),
(filesrc_suite):
Add unit test for the GstURIHandler interface in filesrc. This also
tests the newly added file://localhost/foo/bar support.
Original commit message from CVS:
* tests/check/gst/gstabi.c:
* tests/check/gst/struct_hppa.h:
* tests/check/libs/libsabi.c:
* tests/check/libs/struct_hppa.h:
Add ABI structs for HPPA (see #393796).
Original commit message from CVS:
* gst/gstregistry.c: (gst_registry_scan_path_level):
Plugin extension on HP-UX is .sl, add that to the list of approved
plugin extensions (see #393796).
* tests/check/gst/gstpad.c: (GST_START_TEST):
ulong => gulong. Fixes compilation with HP-UX compiler.
* tests/check/pipelines/parse-launch.c: (GST_START_TEST):
Fix compilation if valgrind headers are not available.
Original commit message from CVS:
* tests/check/Makefile.am:
* tests/check/elements/queue.c: (queue_overrun), (queue_underrun),
(GST_START_TEST), (queue_suite):
enable queue test again, add tests for the leaky behaviour
Original commit message from CVS:
* configure.ac:
* tests/examples/Makefile.am:
Compile adapter test/example only if the required headers are
available (fixes#391915).
Original commit message from CVS:
* docs/design/part-states.txt:
two tiny additional comments
* gst/gststructure.c:
doc fixing
* tests/check/Makefile.am:
* tests/check/elements/queue.c: (queue_overrun), (queue_underrun),
(GST_START_TEST):
disable test for now, unless it gets fixed
Original commit message from CVS:
* tests/check/elements/.cvsignore:
ignore more
* tests/check/elements/queue.c: (queue_overrun), (queue_underrun),
(GST_START_TEST):
try to narrow test failure
Original commit message from CVS:
* gst/gstsegment.c: (gst_segment_set_seek):
Fine tune the cases where the segment start/stop values are really
updated.
* tests/check/gst/gstsegment.c: (GST_START_TEST):
Add tests for the return values of gst_segment_set_seek().
Original commit message from CVS:
* tests/check/gst/gstbin.c: (GST_START_TEST):
It is acceptable to have a refcount of 2 or 3 at this point in the
test, because the pipeline might be just posting its state_change
message. The next line then waits for that message to appear using
bus_poll, so that should be fine too.
Original commit message from CVS:
Patch by: René Stadler <mail at renestadler dot de>
* gst/gstclock.c: (gst_clock_id_wait):
Make period ids add the interval to the origial requested time instead
of the possibly updated time which can be wrong when there are multiple
waiters for the same id. Fixes#382592.
* gst/gstsystemclock.c: (gst_system_clock_async_thread),
(gst_system_clock_id_wait_jitter_unlocked),
(gst_system_clock_id_wait_jitter):
Fix restart in the async notify thread when an async entry is added to
the front of the list. Fixes#381492.
* tests/check/gst/gstsystemclock.c: (store_callback),
(notify_callback), (GST_START_TEST), (gst_systemclock_suite):
Added test for multiple async waits.
Added test for async wait order.
Original commit message from CVS:
* gst/gstsegment.c: (gst_segment_set_seek),
(gst_segment_set_newsegment_full), (gst_segment_to_stream_time),
(gst_segment_to_running_time):
Fix boundary checking in to_running_time() and to_stream_time().
Fixes#377183.
* tests/check/gst/gstsegment.c: (GST_START_TEST):
stream and running time can now be calculated for the complete
clipped segment.
Original commit message from CVS:
* tests/examples/adapter/Makefile.am:
* tests/examples/adapter/adapter_test.c: (run_test_take),
(run_test_take_buffer), (run_tests), (main):
Add new files from the previous commit
Original commit message from CVS:
* Makefile.am:
* configure.ac:
* libs/gst/base/gstadapter.c: (gst_adapter_clear),
(gst_adapter_push), (gst_adapter_peek_into), (gst_adapter_peek),
(gst_adapter_flush), (gst_adapter_take), (gst_adapter_take_buffer):
* libs/gst/base/gstadapter.h:
* tests/check/libs/adapter.c: (create_and_fill_adapter),
(GST_START_TEST), (gst_adapter_suite):
* tests/examples/Makefile.am:
Do some optimisation work in GstAdapter to avoid copies in more cases.
It could still do slightly better by merging buffers when
gst_buffer_is_span_fast is true, but is already faster.
Also, avoid traversing a single-linked list to append each incoming
buffer inside the adapter.
Add simple test app that times the adapter behaviour in different
situations, and extend the unit test to check that bytes enter and
exit the adapter in their original order.
Original commit message from CVS:
* tests/examples/typefind/typefind.c: (type_found), (main):
Make typefind element example work again (#371894); add a
license header.
Original commit message from CVS:
* gst/gststructure.c: (gst_structure_id_set_value):
If someone tries to set a non-UTF8 string field on a structure,
don't just print a warning, but also ignore the request and do
not change/add that field to the structure.
* tests/check/gst/gsttag.c: (GST_START_TEST), (gst_tag_suite):
Test for the above.
Original commit message from CVS:
* libs/gst/controller/gstcontroller.c: (gst_controller_new_list):
Fix refcounting here too, just like we did for _new_valist() a few
days ago (#357180) (thanks to René Stadler). Also remove all those
'Since: 0.9' from the gtk-doc blobs.
* tests/check/libs/controller.c: (controller_refcount_new_list),
(gst_controller_suite):
Unit test for the above.
Original commit message from CVS:
* gst/gstevent.c: (gst_event_new_seek), (gst_event_parse_seek):
Rename some more @cur to @start to fix docs.
* gst/gstsegment.c: (gst_segment_set_seek):
Fix typo.
time and start must always stay in sync as defined in design doc.
* gst/gsttaglist.c: (gst_tag_list_is_empty):
Rename param to fix docs.
* tests/check/gst/gstsegment.c: (GST_START_TEST):
Check that start and time are in sync.
* tests/check/pipelines/parse-launch.c:
(gst_parse_test_element_change_state):
Activate pad before adding to the element.
Original commit message from CVS:
* gst/gsttaglist.c: (gst_tag_list_is_empty):
* gst/gsttaglist.h:
* docs/gst/gstreamer-sections.txt:
API: add gst_tag_list_is_empty() (#360467).
* tests/check/gst/gsttag.c: (GST_START_TEST):
And a test case.
Original commit message from CVS:
* gst/gsttaglist.c: (gst_is_tag_list):
* gst/gsttaglist.h:
Minor fixes to GST_IS_TAG_LIST and gst_is_tag_list().
* tests/check/gst/gsttag.c: (GST_START_TEST), (gst_tag_suite):
Small test for the above.
Original commit message from CVS:
Patch by: Alessandro Decina <alessandro at nnva org>
* gst/gstevent.c: (_gst_event_copy):
Fix gst_mini_object_make_writable() and gst_event_copy() for events
with event structures by setting the parent refcount address of the
copied structure to the address of the refcount member of the newly
copied event rather than the address of the refcount member of the
original event. Fixes#358737.
* tests/check/gst/gstevent.c: (GST_START_TEST):
Unit test for the above.
Original commit message from CVS:
* tests/check/libs/controller.c: (GST_START_TEST),
(gst_controller_suite):
Add test for the previous fix; add some more tests
for correct refcounting behaviour; fix a few leaks
in test cases; call gst_controller_init() at start
of all tests.
