Commit graph

1161 commits

Author SHA1 Message Date
François Laignel
39f0905a7e Use gst_element_request_pad_simple
Instead of the deprecated gst_element_get_request_pad.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/958>
2021-05-05 06:17:20 +00:00
Guillaume Desmottes
5fa3325335 rtpopuspay: set MARKER flag
Set MARKER flag on first buffer after DTX.

According to RFC 3551 section 4.1 the marker bit needs to be set on
"the first packet after a silence period during which packets have
not been transmitted contiguously".

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/967>
2021-04-26 15:25:56 +02:00
Guillaume Desmottes
41ba8c1b00 rtpopuspay: add DTX support
If enabled, the payloader won't transmit empty frames.

Can be tested using:
  opusenc dtx=true bitrate-type=vbr ! rtpopuspay dtx=true

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/967>
2021-04-26 15:25:56 +02:00
Havard Graff
d75c678479 rtpjitterbuffer: fix divide-by-zero
The estimated packet-duration can sometimes end up as zero, and dividing
by that is never a good idea...

The test reproduces the scenario, and the fix is easy.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/966>
2021-04-25 02:21:04 +02:00
Havard Graff
1368b4214b rtpjitterbuffer: clean up and improve missing packets handling
* Try to make variable and function names more clear.
* Add plenty of comments describing the logic step-by-step.
* Improve the logging around this, making the logs easier to read and
  understand when debugging these issues.

* Revise the logic of packets that are actually beyond saving in doing
  the following:
1. Do an optimistic estimation of which packets can still arrive.
2. Based on this, find which packets (and duration) are now hopelessly
   lost.
3. Issue an immediate lost-event for the hopelessly lost and then add
   lost/rtx timers for the ones we still hope to save, meaning that if
   they are to arrive, they will not be discarded.

* Revise the use of rtx-delay:
  Earlier the rtx-delay would vary, depending on the pts of the latest
  packet and the estimated pts of the packet it being issued a RTX for,
  but now that we aim to estimate the PTS of the missing packet accurately,
  the RTX delay should remain the same for all packets.
  Meaning: If the packet have a PTS of X, the delay in asked for a RTX
  for this packet is always a constant X + delay, not a variable one.

* Finally ensure that the chaotic "check-for-stall" tests uses timestamps
  that starts from 0 to make them easier to debug.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/952>
2021-04-24 13:53:58 +00:00
Doug Nazar
b289cc6788 rtp: fix test_twcc_header_and_run to support big endian.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/942>
2021-04-13 11:35:15 +00:00
Doug Nazar
f5f94695f2 tests: Fix alpha test on big endian machines.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/943>
2021-04-13 08:20:45 +00:00
Stéphane Cerveau
80f8780e92 rtp: allow per feature registration
Split plugin into features including
dynamic types which can be indiviually
registered during a static build.

More details here:

https://gitlab.freedesktop.org/gstreamer/gst-build/-/merge_requests/199
https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/661

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/876>
2021-03-29 12:45:22 +02:00
Víctor Manuel Jáquez Leal
db382cbc3d videocrop: handle non raw caps features
Currently, videocrop, only negotiates raw caps (system memory) because
it's the type of memory it can modify. Nonetheless, it's also possible
for the element to handle non-raw caps when only adding the crop meta
is possible, in other words, when downstream buffer pools expose the
crop API.

This patch enable non-raw caps negotiation. If downstream doesn't
expose crop API and negotiated caps are featured, the negotiation
fails.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/915>
2021-03-26 10:19:03 +00:00
Guillaume Desmottes
1796f3f5e4 wavparse: fix seeking in READY state
wavparse claims to be able to support seeking in the READY state by
saving the pending seek event and actually seeking later after having parsed the
header.
Problem was that this seek event was reset on the READY to PAUSED
transition, making all this code useless. Fixing it by stop resetting
on READY to PAUSED transition as we already reset on PAUSED to READY
and when initiating the element.

Note that DTS marker detection isn't support in such scenario as
gst_type_find_helper_for_buffer() needs a buffer containing the
beginning of the stream.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/879>
2021-02-18 16:32:24 +01:00
Guillaume Desmottes
4aa39da2d3 tests: wavparse: factor out create_pipeline()
No semantic change.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/879>
2021-02-18 10:38:18 +01:00
Jakub Adam
b105797163 tests: add rtpopus multichannel test cases
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/832>
2021-02-11 07:46:04 +00:00
Guillaume Desmottes
7b7e49de31 rtp: add rtphdrextrfc6464
Header Extension for Client-to-Mixer Audio Level Indication as
defined in RFC 6464.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/630>
2021-02-04 11:12:51 +01:00
Guillaume Desmottes
4b6c3c9a1b level: add GstRTPAudioLevelMeta on buffers
This meta can be used by a RTP payloader to send the level information
to the peer.

Part of https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/-/issues/446

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/630>
2021-02-04 11:12:47 +01:00
Matthew Waters
db15ec9286 videoflip: fix possible crash when setting the video-direction while running
A classic case of not enough locking.

One interesting thing with this is the interaction between the
rotation value and caps negotiation.  i.e. the width/height of the caps
can be swapped depending on the video-direction property.  We can't lock
the entirety of the caps negotiation for obvious reasons so we need to
do something else.  This takes the approach of trying to use a single
rotation value throughout the entirety of the negotiation and then
subsequent output frame in a kind of latching sequence.

Fixes: https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/issues/792
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/836>
2021-01-04 12:10:12 +00:00
Matthew Waters
35018d67ef tests: add tests for videoflip
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/836>
2021-01-04 12:10:12 +00:00
Jan Schmidt
2d24a45c89 splitmuxsink: Unit test - check format/opened/closed sequence
Check the sequence of format-location/fragment-opened/fragment-closed
events is respected. There should be 1 format-location call for each
fragment-opened message, and 1 fragment-closed for each.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/833>
2020-12-12 03:28:56 +11:00
Marijn Suijten
030b1b3fa5 tests/rtp-payloading: Use new AudioFormatInfo::fill_silence function
The function is renamed to be properly associated with AudioFormatInfo
(its instance) instead of AudioFormat (an unrelated enum), see [1] for
the rename itself.

[1]: https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/-/merge_requests/940
2020-11-26 10:06:25 +02:00
Havard Graff
79748dab2b rtpsession: never send on a non-internal source
This will end up as a "received" packet, due to the code in
source_push_rtp, which will think this is a packet being received.

Instead drop the packet and hope that either:
1. Something upstream responds to the GstRTPCollision event and changes
   SSRC used for sending.
2. That the application responds to the "on-ssrc-collision" signal, and
   forces the sender (payloader) to change its SSRC.
3. That the BYE sent to the existing user of this SSRC will respond to
   the BYE, and that we timeout this source, so we can continue sending
   using the chosen SSRC.

The test reproduces a scenario where we previously would have sent
on a non-internal source.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/817>
2020-11-13 21:35:58 +01:00
Tim-Philipp Müller
f5310ce346 tests: qtdemux: fix typo in caps field
timesacle -> timescale

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/815>
2020-11-12 23:40:13 +00:00
Tim-Philipp Müller
2ce5909f3a tests: qtdemux: fix crash on 32-bit architectures
Fixes https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/issues/803

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/815>
2020-11-12 23:40:13 +00:00
Jan Schmidt
81ecf076e8 splitmuxsrc: Fix comment in a test
Fix a comment in the splitmuxsrc robust muxing test so it
describes the test properly.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/798>
2020-10-31 02:50:51 +00:00
Stian Selnes
95579a00c0 rtpvp9depay: Improve SVC parsing, aggregate all layers
- Fix start and end of picture to support multiple layers. Start of
  picture is the first packet of the base layer, while end of picture
  is when the marker bit is set (last packet of the enhancement
  layers).
- All "layers" (aka "frames") of a picture are pushed downstream in a
  single buffer when picture is complete.
- Forgive SID=0 for enhancement layers (invalid, but Chrome and
  Firefox sends it)

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/773>
2020-10-30 17:46:30 +01:00
Stian Selnes
d77fcf251b rtpvp8depay: Send lost events when marker bit is missing
This means the previous frame was incomplete.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/796>
2020-10-30 03:43:19 +01:00
Mikhail Fludkov
346b077ae0 rtpvp*depay: possibly forward might-have-been-fec PacketLost events
This is ad adaptation of a Pexip patch for dealing with spurious
GstRTPPacketLost events caused by lost ulpfec packets: as FEC packets
under that scheme are spliced in the same sequence domain as the media
packets, it is not generally possible to determine whether a lost packet
was a FEC packet or a media packet.

When upstreaming pexip's ulpfec patches, we decided to drop all lost
events at the base depayloader level, and where the original patch
from pexip was making use of picture ids and marker bits to determine
whether a packet should be forwarded, this patch makes use of those
to determine whether they should be dropped instead (by removing their
might-have-been-fec field).

Spurious lost events coming out of the depayloader can cause the
decoder to stop decoding until the next keyframe and / or request a new
keyframe, and while this is not desirable it makes sense to forward
that information when we have other means to determine whether a lost
packet was indeed a FEC packet, as is the case with VP8 / VP9 payloads
when they carry a picture id.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/769>
2020-10-29 19:56:07 +01:00
Havard Graff
63c7a9ae43 rtpjitterbuffer: don't send multiple instant RTX for the same packet
Due to us not properly acknowleding the time when the last RTX was sent
when scheduling a new one, it can easily happen that due to the packet
you are requesting have a PTS that is slightly old (but not too old when
adding the latency of the jitterbuffer), both its calculated second and
third (etc.) timeout could already have passed. This would lead to a burst
of RTX requests, which acts completely against its purpose, potentially
spending a lot more bandwidth than needed.

This has been properly reproduced in the test:
test_rtx_not_bursting_requests

The good news is that slightly re-thinking the logic concerning
re-requesting RTX, made it a lot simpler to understand, and allows us
to remove two members of the RtpTimer which no longer serves any purpose
due to the refactoring. If desirable the whole "delay" concept can actually
be removed completely from the timers, and simply just added to the timeout
by the caller of the API. But that can be a change for a another time.

The only external change (other than the improved behavior around bursting
RTX) is that the "delay" field now stricly represents the delay between
the PTS of the RTX-requested packet and the time it is requested on,
whereas before this calculation was more about the theoretical calculated
delay. This is visible in three other RTX-tests where the delay had
to be adjusted slightly. I am confident however that this change is
correct.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/789>
2020-10-28 01:22:24 +01:00
John-Mark Bell
3348c5ceae rtpvp8pay: payload temporally scaled bitstreams.
Co-Authored-By: Vincent Sanders <vince@pexip.com>
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/728>
2020-10-16 09:25:10 +00:00
John-Mark Bell
d9cedee042 vp8enc: finish support for temporally scaled encoding
- introduce two new properties:

    * temporal-scalability-layer-flags:

      Provide fine-grained control of layer encoding to the
      outside world. The flags sequence should be a multiple of
      the periodicity and is indexed by a running count of encoded
      frames modulo the sequence length.

    * temporal-scalability-layer-sync-flags:

      Specify the pattern of inter-layer synchronisation (i.e.
      which of the frames generated by the layer encoding
      specification represent an inter-layer synchronisation).
      There must be one entry per entry in
      temporal-scalability-layer-flags.

  - apply temporal scalability settings and expose as buffer
    metadata.

    This allows the codec to allocate a given frame to the correct
    internal bitrate allocator. Additionally, all the
    non-bitstream metadata needed to payload a temporally scaled
    stream is now attached to each output buffer as a
    GstVideoVP8Meta.

  - add unit test for temporally scaled encoding.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/728>
2020-10-16 09:25:10 +00:00
Mathieu Duponchelle
591af0f38a rtpmanager: implement SMPTE 2022-1 FEC encoder
+ improve integration of FEC encoders in rtpbin

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/753>
2020-10-08 22:22:18 +00:00
Mathieu Duponchelle
cff42d4c26 rtpmanager: implement SMPTE 2022-1 FEC decoder
+ improve integration of FEC decoders in rtpbin

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/753>
2020-10-08 22:22:18 +00:00
Olivier Crête
7c9a5e86fe rtpfunnel: Also forward custom sticky event
This is useful to track metadata about each group of packets

Also include a unit test

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/666>
2020-10-06 20:57:49 +00:00
Matthew Waters
e81ce6f2d7 qtmux: properly support initial caps nego failure
Scenario:
- gap event causes h264parse to push made up caps that may fail checks
  inside qtmux (e.g missing codec_data).
- the caps event has already been marked as received and is sticky on
  the sink pad
- gst_qt_mux_pad_can_renegotiate() will retrieve the failed caps event
  using gst_pad_get_current_caps() and reject the correct updated caps
  with codec_data.
- Failure!

Keep track of the configured caps ourselves instead of relying on the
sticky event on the pad.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/732>
2020-09-28 15:37:12 +10:00
Matthew Waters
ea61714c70 rtph26*depay: drop FU's without a corresponding start bit
If we have not received a FU with a start bit set, any subsequent FU
data is not useful at all and would result in an invalid stream.

This case is constructed from multiple requirements in
RFC 3984 Section 5.8 and RFC 7798 Section 4.4.3.  Following are excerpts
from RFC 3984 but RFC 7798 contains similar language.

The FU in a single FU case is forbidden:

   A fragmented NAL unit MUST NOT be transmitted in one FU; i.e., the
   Start bit and End bit MUST NOT both be set to one in the same FU
   header.

and dropping is possible:

   If a fragmentation unit is lost, the receiver SHOULD discard all
   following fragmentation units in transmission order corresponding to
   the same fragmented NAL unit.

The jump in seqnum case is supported by this from the specification
instead of implementing the forbidden_zero_bit mangling:

   If a fragmentation unit is lost, the receiver SHOULD discard all
   following fragmentation units in transmission order corresponding to
   the same fragmented NAL unit.

   A receiver in an endpoint or in a MANE MAY aggregate the first n-1
   fragments of a NAL unit to an (incomplete) NAL unit, even if fragment
   n of that NAL unit is not received.  In this case, the
   forbidden_zero_bit of the NAL unit MUST be set to one to indicate a
   syntax violation.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/730>
2020-09-21 08:08:38 +00:00
Matthew Waters
52b63de19a isomp4/mux: add a fragment mode for initial moov with data
Used by some proprietary software for their fragmented files.

Adds some support for multi-stream fragmented files

Flow is as follows.
1. The first 'fragment' is written as a self-contained fragmented
   mdat+moov complete with an edit list and durations, tags, etc.
2. Subsequent fragments are written with a mdat+moof and each stream is
   interleaved as data arrives (currently ignoring the interleave-*
   properties).  data-offsets in both the traf and the trun ensure
   data is read from the correct place on demuxing.  Data/chunk offsets
   are also kept for writing out the final moov.
3. On finalisation, the initial moov is invalidated to a hoov and the
   size of the first mdat is extended to cover the entire file contents.
   Then a moov is written as regularly would in moov-at-end mode (the
   default).

This results in a file that is playable throughout while leaving a
finalised file on completion for players that do not understand
fragmented mp4.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/643>
2020-09-21 12:08:14 +10:00
John-Mark Bell
8f684913cf vp8enc: improve unit tests
- make test_encode_simple cope with libvpx built with
    CONFIG_REALTIME_ONLY. Sadly, there's no way to detect this at
    runtime beyond trying to set lag-in-frames to >0, pushing a
    buffer and catching the GST_FLOW_NOT_NEGOTIATED return.

  - fix bitrot in test_encode_simple_when_bitrate_set_to_zero.

  - port test_encode_simple to GstHarness and introduce a separate
    test for the lag-in-frames property.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/708>
2020-09-08 22:59:29 +00:00
Sebastian Dröge
e9a0307b94 rtph26[45]pay: Change default aggregate-mode to "none" for backwards compatibility
We didn't aggregate at all in previous versions and there are apparently
various RTP implementations that don't handle aggregation well at all.

As part of this also document that for RTSP it is recommended to keep it
set to "none" while for WebRTC it should be set to "zero-latency".

Fixes https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/issues/749

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/692>
2020-08-08 10:08:31 +03:00
Hosang Lee
d6f6e8410e tests: qtdemux: test correct pad names are created
Test correct pad names are created in accordance to their media type
in mss mode.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/628>
2020-07-28 11:41:51 +00:00
Justin Chadwell
738f32d5d0 qtdemux: fix allocation explosion with stsd entries
Previously, the user input for stsd entries is trusted completely, and
so a maliciously crafted file could choose the length of the stsd
entries arbitrarily and cause qtdemux to try to allocate up to 2GB of
memory (half of a 32 bit max int).

This patch fixes this by sanity checking the stsd input against the
size of the entire stsd atom.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/670>
2020-07-15 12:10:45 +00:00
Justin Chadwell
e6f66f4681 qtdemux: fix crashes when input stream contained no stsd entries
During trak parsing, we need to check for the existence of stsd_entries,
otherwise, we end up with a NULL pointer to them. It is entirely
possible for the stsd to exist, but for it to have no entries, which the
previous checks did not take into account.

This patch adds a simply check to ensure that all files that do not
contain a stsd entry are deemed corrupt, and adds a test case to prevent
a regression.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/670>
2020-07-15 12:10:45 +00:00
Sebastian Dröge
3ad86bdf30 imagefreeze: Add test for new live mode
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/653>
2020-06-29 12:07:14 +03:00
Havard Graff
cdba5952ed rtpsession: make tests more stable
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/410>
2020-06-20 19:45:33 +00:00
Tim-Philipp Müller
d654c6feae tests: don't pull in all -bad plugin, only allow the one we need
Set up our plugin include list for tests in such a way that
we don't pull in *all* plugins from -bad but only the one
used in the splitmuxsink unit test, i.e. the timecode plugin,
so we don't accidentally use other encoders/decoders such as
nvenc/dec for example.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/617>
2020-06-09 15:23:40 +01:00
Guillaume Desmottes
0594d2f981 tests: vp9enc: enforce I420 format
Test was not enforcing a video format on videotestsrc. I420 was picked
as it was the first format in GST_VIDEO_FORMATS_ALL which will no longer
be true (gst-plugins-base!689).

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/615>
2020-06-08 17:58:29 +02:00
Mikhail Fludkov
7b390a8bbd vpxenc: Add new bit-per-pixel property to select a better "default" bitrate
As part of this also change the default bitrate value to 0. The default
value was 256000 previously. In reality, if the property was not set the
bitrate value would be scaled according to the resolution which is not
very intuitive behavior. It is better to use 0 for this purpose. Now
together with newly introduced property "bits-per-pixel" 0 means to
assign the bitrate according to resolution/framerate.

The default bitrates are now
 - 1.2Mbps for VP8 720p@30fps
 - 0.8Mbps for VP9 720p@30fps
and scaled accordingly for different resolutions/framerates.

Previously the default bitrate was also not scaled according to the
framerate but only took the resolution into account.

This also fixes the side effect of setting bitrate to 0. Previously
encoder would not produce any data at all.

Addition from Sebastian Dröge <sebastian@centricular.com> to assume
30fps if no framerate is given in the caps instead of not calculating
any bitrate at all.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/611>
2020-06-04 20:14:03 +00:00
Stian Selnes
44e4de43da vpxdec: Check that output width and height != 0
For VP8 it's possible to signal width or height to be 0, but it does
not make sense to do so. For VP9 it's impossible. Hence, we most
likely have a corrupt stream. Trying to negotiate caps downstream with
either width or height as 0 will fail with something like

gst_video_decoder_negotiate_default: assertion 'GST_VIDEO_INFO_WIDTH (&state->info) != 0' failed

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/610>
2020-06-02 23:59:20 +03:00
Tim-Philipp Müller
5f91be7ea0 tests: fix meson test env setup to make sure we use the right gst-plugin-scanner
If core is built as a subproject (e.g. as in gst-build), make sure to use
the gst-plugin-scanner from the built subproject. Without this, gstreamer
might accidentally use the gst-plugin-scanner from the install prefix if
that exists, which in turn might drag in gst library versions we didn't
mean to drag in. Those gst library versions might then be older than
what our current build needs, and might cause our newly-built plugins
to get blacklisted in the test registry because they rely on a symbol
that the wrongly-pulled in gst lib doesn't have.

This should fix running of unit tests in gst-build when invoking
meson test or ninja test from outside the devenv for the case where
there is an older or different-version gst-plugin-scanner installed
in the install prefix.

In case no gst-plugin-scanner is installed in the install prefix, this
will fix "GStreamer-WARNING: External plugin loader failed. This most
likely means that the plugin loader helper binary was not found or
could not be run. You might need to set the GST_PLUGIN_SCANNER
environment variable if your setup is unusual." warnings when running
the unit tests.

In the case where we find GStreamer core via pkg-config we use
a newly-added pkg-config var "pluginscannerdir" to get the right
directory. This has the benefit of working transparently for both
installed and uninstalled pkg-config files/setups.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/603>
2020-05-27 12:42:38 +01:00
Seungha Yang
ea1797ccb5 tests: splitmuxsink: Add more timecode based split test
... and split test cases to run tests in parallel
2020-04-20 21:39:54 +09:00
Havard Graff
981d0c02de rtpjitterbuffer: don't use RTX packets in rate-calc and reset-logic
The problem was this:

Due to the highly irregular arrival of RTX-packet the max-misorder variable
could be pushed very low. (-10).

If you then at some point get a big in the sequence-numbers (62 in the
test) you end up sending RTX-requests for some of those packets, and then
if the sender answers those requests, you are going to get a bunch of
RTX-packets arriving. (-13 and then 5 more packets in the test)

Now, if max-misorder is pushed very low at this point, these RTX-packets
will trigger the handle_big_gap_buffer() logic, and because they arriving
so neatly in order, (as they would, since they have been requested like
that), the gst_rtp_jitter_buffer_reset() will be called, and two things
will happen:
1. priv->next_seqnum will be set to the first RTX packet
2. the 5 RTX-packet will be pushed into the chain() function

However, at this point, these RTX-packets are no longer valid, the
jitterbuffer has already pushed lost-events for these, so they will now
be dropped on the floor, and never make it to the waiting loop-function.

And, since we now have a priv->next_seqnum that will never arrive
in the loop-function, the jitterbuffer is now stalled forever, and will
not push out another buffer.

The proposed fixes:
1. Don't use RTX in calculation of the packet-rate.
2. Don't use RTX in large-gap logic, as they are likely to be dropped.
2020-04-16 17:06:31 +02:00
Kristofer Björkström
586fc57e55 rtpjpeg: Use gst_memory_map() instead of gst_buffer_map()
gst_buffer_map () results in memcopying when a GstBuffer contains
more than one GstMemory.
This has quite an impact on performance on systems with limited amount
of resources. With this patch the whole GstBuffer will not be mapped at
once, instead each individual GstMemory will be iterated and mapped
separately.
2020-04-03 17:01:24 +02:00
Havard Graff
d9aaa15a30 rtpopuspay: make depay ! pay work
There is a use-case for a server to re-payload opus going through it.

Problem was that the payloader requires channels in the caps, but
this is not something the depayloader can parse out of the stream, meaning
caps-negotiation would fail.

Removing the requirement of channels in the template-caps fixes this.
2020-04-03 09:04:32 +00:00