Original commit message from CVS:
* gst/gstvalue.c: (gst_value_compare_list),
(gst_value_compare_array), (_gst_value_initialize):
* tests/check/gst/gstvalue.c: (GST_START_TEST):
Make GstValueArray comparison be order dependent as designed.
Add checks for value lists and value array comparisons.
Fixes#347221
Original commit message from CVS:
* gst/gstbin.c: (activate_pads),
(iterator_activate_fold_with_resync), (gst_bin_src_pads_activate),
(gst_bin_change_state_func):
(de)activate src pads before calling state_change on the childs.
This is to avoid the case where a src ghostpad is blocked (holding the
stream lock), which would block the deactivation of the ghostpad's
target pad.
* gst/gstghostpad.c: (gst_proxy_pad_do_query_type),
(gst_proxy_pad_do_event), (gst_proxy_pad_do_query),
(gst_proxy_pad_do_internal_link), (gst_proxy_pad_do_bufferalloc),
(gst_proxy_pad_do_chain), (gst_proxy_pad_do_getrange),
(gst_proxy_pad_do_checkgetrange), (gst_proxy_pad_do_getcaps),
(gst_proxy_pad_do_acceptcaps), (gst_proxy_pad_do_fixatecaps),
(gst_proxy_pad_do_setcaps), (gst_proxy_pad_set_target_unlocked),
(gst_proxy_pad_set_target), (gst_proxy_pad_get_internal),
(gst_proxy_pad_dispose), (gst_proxy_pad_init),
(gst_ghost_pad_parent_set), (gst_ghost_pad_parent_unset),
(gst_ghost_pad_class_init),
(gst_ghost_pad_internal_do_activate_push),
(gst_ghost_pad_internal_do_activate_pull),
(gst_ghost_pad_do_activate_push), (gst_ghost_pad_do_activate_pull),
(gst_ghost_pad_do_link), (gst_ghost_pad_do_unlink),
(gst_ghost_pad_dispose), (gst_ghost_pad_new_no_target),
(gst_ghost_pad_new), (gst_ghost_pad_set_target):
GhostPads now create their internal GstProxyPad at creation (and not
when they're linked, as it was being done previously).
The internal and target pads are linked straight away.
The data will also travel through the other pad in order to make
pad blocking and probes non-hackish (the probe/block now really happens
on the GhostPad and not on the target).
* gst/gstpad.c: (gst_pad_set_blocked_async),
(gst_pad_link_prepare), (gst_pad_push_event):
Remove previous ghostpad cruft.
* gst/gstutils.c: (gst_pad_add_data_probe),
(gst_pad_add_event_probe), (gst_pad_add_buffer_probe),
(gst_pad_remove_data_probe), (gst_pad_remove_event_probe),
(gst_pad_remove_buffer_probe):
Remove previous ghost pad cruft.
Added more detailed debug statements.
* tests/check/gst/gstghostpad.c: (GST_START_TEST):
Fix the testsuite for refcounting changes.
The comments about who has references were correct, but the refcount
being checked wasn't the same (!?!).
Original commit message from CVS:
* gst/Makefile.am:
* gst/gstconfig.h.in:
* win32/common/config.h:
Fix build when disabling tracing (fixes#344016). Also start to document
the defines that disable the sub-systems.
Original commit message from CVS:
* gst/gstelement.c: (activate_pads),
(iterator_activate_fold_with_resync), (gst_element_pads_activate):
Better pad activation code: Reset the collect value too on resync.
Add some comments.
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_init), (gst_pad_activate_pull),
(gst_pad_activate_push):
Use some more macros where it makes sense.
Allow pad mode switching instead of asserting. When a pad
is activated in one mode and we activate it in another,
deactivate it first before activating it in a different mode.
Fixes#329198.
Original commit message from CVS:
2006-07-08 Andy Wingo <wingo@pobox.com>
* tools/gst-launch.c (main): Handle err == NULL.
* gst/gst.c (init_post, ensure_current_registry)
(ensure_current_registry_forking)
(ensure_current_registry_nonforking): Reduce #ifdef ratnest by
factoring out the registry scanning into separate functions. Don't
fork for the rescan is GST_REGISTRY_FORK=no; useful in debugging.
Better environment var name/interface suggestions accepted.
Original commit message from CVS:
* gst/gstobject.c: (gst_object_set_name_default),
(gst_object_set_name):
Random micro-optimisation: don't use a hash table
with strings as keys and the usual strdup/strcmp
involved, but rather just use the GQuark of the
type name as key, since it needs to be looked up
anyway to get the type name string.
* tests/check/gst/gstobject.c: (GST_START_TEST):
Fix various leaks.
Original commit message from CVS:
* gst/gstbin.c: (compare_interface), (gst_bin_get_by_interface),
(gst_bin_iterate_all_by_interface):
Can't use GPOINTER_TO_INT and GINT_TO_POINTER with GTypes.
GTypes are gulongs and thus the top 4 bytes might be cut
off on some platforms when doing GPOINTER_TO_INT, leading
to invalid GTypes and bad things happening.
Also add a check to make sure the type passed in is really
an interface type.
Original commit message from CVS:
* Makefile.am:
* configure.ac:
* gst-element-check.m4:
* gst-element-check.m4.in:
Make gst-element-check-$VERSION.m4 call gst-inspect-$VERSION
instead of the unversioned gst-inspect (#324176, #168659).
Original commit message from CVS:
* libs/gst/base/gstbasesrc.c: (gst_base_src_class_init),
(gst_base_src_wait), (gst_base_src_update_length),
(gst_base_src_get_range), (gst_base_src_default_check_get_range),
(gst_base_src_check_get_range), (gst_base_src_pad_check_get_range),
(gst_base_src_loop), (gst_base_src_start),
(gst_base_src_activate_pull):
Update docs.
blocksize == 0 now means the default blocksize when working in push
based mode.
Remove some pointless asserts in _wait function.
Fix offset/length calculations and EOS handling. We can now pull 0
bytes as well, which is allowed.
use _check_get_range() to decide if we can operate in _pull based
mode.
Fix refcounting leak when check_get_range function was not
implemented.
API GstBaseSrc::blocksize range can be 0 too now (default)
* tests/check/elements/filesrc.c: (GST_START_TEST),
(filesrc_suite):
Added check to test _get_range() behaviour.
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_chain_unchecked), (gst_pad_chain),
(gst_pad_push), (gst_pad_check_pull_range), (gst_pad_get_range),
(gst_pad_pull_range):
* gst/gstpad.h:
Lots of comments and docs added to the pad functions.
Flesh out the expected behaviour of the get_range() functions.
Original commit message from CVS:
* win32/common/libgstbase.def:
* win32/common/libgstdataprotocol.def:
* win32/common/libsgtreamer.def:
Add new exported functions.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_preroll_object),
(gst_base_sink_loop), (gst_base_sink_get_position):
When operating in pull mode update the offset so that we
read sequentially.
Original commit message from CVS:
* gst/gstregistryxml.c: (read_string):
Avoid strdup. (will happen in libxml, but hey!)
* gst/gsturi.c:
Add some more docs.
Original commit message from CVS:
* gst/gstbuffer.c: (_gst_buffer_copy), (gst_buffer_create_sub):
* tests/check/gst/gstbuffer.c: (GST_START_TEST),
(gst_buffer_suite):
No point in checking if the size of the subbuffer > 0, the
code handles it correclty as demonstrated by unit test.
Also add a unit test for the zero sized _new_and_alloc and
_copy. Fixes#346663.
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_prepare_output_buffer),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer):
Make sure the buffer we pass to transform_ip has a refcount of
1 and thus is writable. Fixes#343196
Original commit message from CVS:
* plugins/elements/gstfilesrc.c: (gst_file_src_class_init),
(gst_file_src_init), (gst_file_src_set_property),
(gst_file_src_get_property), (gst_file_src_map_region):
* plugins/elements/gstfilesrc.h:
Add "sequential" property, off by default, to use madvise and hint
to the kernel that sequential access is desired.
Touch all retrieved pages by default to ensure they are pulled
into memory. (Closes#345720)
Original commit message from CVS:
* gst/gstcaps.c: (gst_caps_new_empty), (_gst_caps_free),
(gst_caps_unref), (gst_static_caps_get),
(gst_caps_append_structure):
* gst/gstclock.c: (gst_clock_entry_new), (_gst_clock_id_free):
Use GSlice when the glib we build against is >= 2.10
Original commit message from CVS:
Patch by: Peter Kjellerstedt <pkj at axis dot com>
* gst/gst-i18n-app.h:
* gst/gst-i18n-lib.h:
* tools/gst-inspect.c: (print_signal_info):
The attached patch will make the inclusion of gettext.h unconditional in
gst/gst-i18n-app.h and gst/gst-i18n-lib.h, and it will remove the inclusion of
libintl.h in tools/gst-inspect.c.
This allows use of --disable-nls again and fixes#344642.
Original commit message from CVS:
* gst/gstpad.c: (handle_pad_block), (gst_pad_push_event):
Implement pad blocking on events according to part-block.txt.
More comments on behaviour.
* tests/check/gst/gstevent.c: (test_event):
Send event to peer pad of blocked pad (else it will block).
Original commit message from CVS:
* libs/gst/check/gstcheck.c: (gst_check_message_error),
(gst_check_run_suite):
if we get the wrong message, give us the types as string
* plugins/elements/gstfilesrc.c: (gst_file_src_start):
Fix a translatable
* tests/check/elements/filesrc.c: (GST_START_TEST):
add a test for trying to open a non-existing file
Original commit message from CVS:
* libs/gst/check/gstcheck.h:
add some assert_ as alias for fail_unless_*
* tests/check/gst/gst.c: (GST_START_TEST), (gst_suite):
increase test coverage
Original commit message from CVS:
* configure.ac:
don't set CFLAGS and friends for gcov, done from GST_GCOV now
* tests/check/Makefile.am:
clean up gcov files
Original commit message from CVS:
* gst/gstcaps.c: (gst_caps_remove_and_get_structure):
remove gst_caps_simplify; it was not declared and not used
and deprecated in 0.8
Original commit message from CVS:
* docs/faq/gst-uninstalled:
don't put empty paths on PYTHONPATH
* docs/gst/gstreamer-sections.txt:
remove some symbols that are not there
Original commit message from CVS:
* libs/gst/dataprotocol/Makefile.am:
build dataprotocol test by linking to the lib, instead of
compiling the source, so we get coverage
* tests/check/Makefile.am:
* tests/check/elements/filesrc.c: (event_func), (setup_filesrc),
(cleanup_filesrc), (GST_START_TEST), (filesrc_suite):
add a test for filesrc
Original commit message from CVS:
* tests/check/Makefile.am:
gst-inspect every element; this makes sure that we also get
coverage on element's get/set functions
* tests/check/gst/gststructure.c: (GST_START_TEST),
(gst_structure_suite):
Push coverage from 59.04% to 70.00%
Original commit message from CVS:
* configure.ac:
set CFLAGS and friends to -O0 if gcov is being used
add GCOV LIBS
* gst/Makefile.am:
* libs/gst/base/Makefile.am:
* libs/gst/check/Makefile.am:
* libs/gst/controller/Makefile.am:
* libs/gst/dataprotocol/Makefile.am:
* libs/gst/net/Makefile.am:
* plugins/elements/Makefile.am:
* plugins/indexers/Makefile.am:
add makefile rules to generate gcov data and clean up
* tests/check/Makefile.am:
add a coverage target that generates an html overview
of coverage data
Original commit message from CVS:
* libs/gst/check/gstcheck.c: (gst_check_run_suite):
* libs/gst/check/gstcheck.h:
create a macro and function so that the simple unit test
case can be just one macro to create main()
Original commit message from CVS:
* gst/gstbin.c: (gst_bin_restore_thyself):
* gst/gstxml.c: (gst_xml_make_element):
Fix deserialisation from XML. Set parent manually
instead of using gst_bin_add(), since gst_bin_add()
will unlink all pads of the element being added.
Fixes#341667.
Original commit message from CVS:
Patch by: Peter Kjellerstedt <pkj at axis com>
* gst/gst.c: (prepare_for_load_plugin_func), (split_and_iterate):
Fix missing g_strdup() and double free when using the
--gst-plugin-load command line option (#346097).
Original commit message from CVS:
* gst/gstinfo.c:
Promote GST_DEBUG_CATEGORY_STATIC in example in docs.
* libs/gst/net/gstnetclientclock.c:
* libs/gst/net/gstnettimeprovider.c:
Use GST_DEBUG_CATEGORY_STATIC here too (#342503).
Original commit message from CVS:
* gst/gstelement.c: (gst_element_pads_activate):
We need to deactivate src pads first and then sink pads.
The reason is the src pads might be blocking while holding the streaming
lock, so we need to deactivate them first so that deactivating the sink
pads doesn't block (since it will require the streaming lock).
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_buffer_alloc):
Forgot to remove two unneeded unrefs.
Simplify a check _is_equal allready checks the obvious case.
Original commit message from CVS:
* gst/gstcaps.c: (gst_caps_replace):
Fix crasher when passed NULL. Doc clarification.
Optimize for the trivial case.
* gst/gstpipeline.c: (gst_pipeline_change_state):
Small cleanups.
* libs/gst/base/gstbasesrc.c: (gst_base_src_loop):
Small documentation cleanup.
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_buffer_alloc):
Don't use silly gst_pad_get_negotiated_caps, GST_PAD_CAPS
is what we need and it avoids a whole lot of redundant
refcount operations.
Original commit message from CVS:
Patch by: Philip Jägenstedt <philip at lysator liu se>
* docs/manual/advanced-dataaccess.xml:
Fix 'Embedding static elements' section to use
GST_PLUGIN_DEFINE_STATIC (#345607).
Original commit message from CVS:
* tests/check/pipelines/simple-launch-lines.c: (test_stop_from_app):
Attempt to 'fix' spuriously failing test case: it seems like the
timeout of half a second is simply too small when the system is under
load otherwise, and the timeout doesn't really seem to serve any
particular purpose here. Give the pipeline a few seconds to preroll
first, and then give it another half a second to go from PAUSED to
PLAYING and marshal the message into the main thread.
Original commit message from CVS:
* tests/check/gst/gstghostpad.c: (block_callback),
(GST_START_TEST), (gst_ghost_pad_suite):
Added some more ghostpad tests, mainly blocking
and probes.
Original commit message from CVS:
* plugins/elements/gstfilesink.c: (gst_file_sink_open_file),
(gst_file_sink_close_file), (gst_file_sink_do_seek),
(gst_file_sink_event), (gst_file_sink_render):
* plugins/elements/gstfilesink.h:
Check if we can seek in the file instead of assuming
we always can. Post an error when we are asked to seek in a
non-seekable file (like a fifo). Fixes#343312.
Some cleanups.
Original commit message from CVS:
* docs/manual/advanced-autoplugging.xml:
* docs/manual/basics-helloworld.xml:
* docs/manual/highlevel-components.xml:
Don't leak bus reference in sample code.
Original commit message from CVS:
* autogen.sh:
Add default for new --enable-plugin-docs switch.
* configure.ac:
Use new GST_PLUGIN_DOCS macro to check for pyxml etc.
Fixes#344039.
* docs/Makefile.am:
Use new ENABLE_PLUGIN_DOCS conditional.
Original commit message from CVS:
* gst/gstbin.c: (bin_query_duration_done), (gst_bin_query):
Make it clear with a FIXME and a real define what the #if 0
previously disabled.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_configure_segment),
(gst_base_sink_preroll_object), (gst_base_sink_get_position):
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_sink_eventfunc):
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_event):
Don't randomly and silently reset a segment when the format
changes as this is a bug somewhere upstream. Fixes#330379.
Original commit message from CVS:
Patch by: Wouter Paesen <wouter at kangaroot net>
* libs/gst/controller/gstcontroller.c:
(gst_controlled_property_new):
Fix controlling of float properties (#344849).
* tests/check/libs/controller.c:
(gst_test_mono_source_get_property),
(gst_test_mono_source_set_property),
(gst_test_mono_source_class_init), (GST_START_TEST):
While we're at it, add some float stuff to unit test.
Original commit message from CVS:
* docs/README:
* docs/images/gdp-header.svg:
add a gdp image
* docs/libs/Makefile.am:
* docs/libs/gdp-header.png:
* libs/gst/dataprotocol/dataprotocol.c:
add it to the API docs
* docs/manual/intro-motivation.xml:
fix typo
Original commit message from CVS:
* gst/gst.c: (scan_and_update_registry), (init_post):
If the fork()'ed child process can't write the updated registry cache
file to disk for some reason, make it exit with a failure exit code,
so that the parent can then re-scan the plugins itself and update the
registry structures in memory and work with that (rather than failing
when creating elements because seemingly no plugins are available).
Refactor registry scanning code into separate function for this and
also separate fork() and non-fork() code paths. Fixes#344748.
Original commit message from CVS:
* gst/gstregistryxml.c: (gst_registry_xml_write_cache):
Fix silly bug that prevented us from creating
~/.gstreamer-0.10 and writing the registry in one
go (the first call to g_mkstemp() would overwrite the
placeholder in the template string, so the second call
to g_mkstemp() after creating the missing directory
would then error out with 'invalid argument').
Original commit message from CVS:
* gst/gstsegment.c: (gst_segment_set_duration),
(gst_segment_set_last_stop), (gst_segment_set_seek),
(gst_segment_set_newsegment_full), (gst_segment_to_stream_time),
(gst_segment_to_running_time), (gst_segment_clip):
Use G_UNLIKELY to help the compiler a bit.
Original commit message from CVS:
* gst/gstbuffer.c: (gst_buffer_get_type), (gst_buffer_finalize),
(_gst_buffer_copy), (gst_buffer_is_metadata_writable),
(gst_subbuffer_finalize), (gst_buffer_create_sub),
(gst_buffer_is_span_fast), (gst_buffer_span):
Init _type for consistency.
Use _FLAGS macro to avoid type check.
Avoid unneeded type checks in subbufer code.
Original commit message from CVS:
* gst/gstobject.c: (gst_object_get_type), (gst_object_ref),
(gst_object_unref):
Add G_UNLIKELY in type registration.
Avoid type check in _ref/_unref since that is also
done in glib.
Original commit message from CVS:
* gst/gstinfo.c: (gst_debug_set_active),
(gst_debug_category_set_threshold), (_gst_debug_nameof_funcptr):
* gst/gstinfo.h:
Add some G_[UN]LIKELY.
Maintain __gst_debug_min to avoid formatting the arguments of
debug messages that will be dropped anyway to avoid a lot of
overhead from the debugging system.
Original commit message from CVS:
* po/POTFILES.in:
* po/POTFILES.skip:
add missing files containing translatable strings, tell intltool about
one exception
Original commit message from CVS:
* gst/gst.c: (init_post):
use _exit() instead of exit() in our forked child; this ensures
that none of the registered exit handlers from whatever is using
GStreamer get executed. This fixes gnome-mixer-applet failing
to load, because ORBit would shut down.
Spotted by: Edward Hervey <edward@fluendo.com>
Fix suggested by: Tim-Philipp Müller <tim at centricular dot net>
Fixes#344474
Original commit message from CVS:
* gst/gstindex.c: (gst_index_gtype_resolver):
* tools/gst-xmlinspect.c: (print_plugin_info):
Fix leak spotted by coverity checker. Fixes#343827
Fix another other leak found by paolo borelli.
Original commit message from CVS:
* libs/gst/check/gstcheck.c: (gst_check_abi_list):
* libs/gst/check/gstcheck.h:
factor out the method from tests that checks size of structures,
and add code to generate the header containing these sizes
* tests/check/gst/gstabi.c: (GST_START_TEST):
* tests/check/gst/struct_i386.h:
* tests/check/libs/libsabi.c: (GST_START_TEST):
* tests/check/libs/struct_i386.h:
use it
Original commit message from CVS:
* gst/gst.c:
plugin_paths is not used if we build without registry support.
* gst/gstsegment.c: (gst_segment_copy):
_copy() was always returning NULL...
Original commit message from CVS:
* libs/gst/dataprotocol/dataprotocol.c:
(gst_dp_header_from_buffer), (gst_dp_packet_from_caps),
(gst_dp_packet_from_event):
factor out CRC code
Original commit message from CVS:
* libs/gst/check/gstcheck.c: (gst_check_init),
(gst_check_chain_func):
* libs/gst/check/gstcheck.h:
Add a cond/mutex to the check support lib, signal this whenever we
add to the buffers list. This will allow tests to not busy-wait on
the buffer-list.
Original commit message from CVS:
* libs/gst/dataprotocol/dataprotocol.c:
(gst_dp_header_from_buffer), (gst_dp_packet_from_caps),
(gst_dp_packet_from_event):
factor out some common header init code
Original commit message from CVS:
* docs/libs/gstreamer-libs-sections.txt:
* docs/libs/tmpl/gstdataprotocol.sgml:
* libs/gst/dataprotocol/dataprotocol.c: (gst_dp_crc):
* libs/gst/dataprotocol/dataprotocol.h:
API: make gst_dp_crc() public
Original commit message from CVS:
Patch by: Alessandro Decina <alessandro at nnva dot org>
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_stop):
Make sure the EOS flag is cleared from pads after a flush
or stop. Fixes#343538.
* tests/check/libs/collectpads.c: (GST_START_TEST),
(gst_collect_pads_suite):
Added test for collectpads reusage after EOS.
Original commit message from CVS:
* gst/gst.c:
set #include <sys/wait.h> in a #ifdef #ifdef HAVE_FORK
* win32/common/libgstbase.def:
export gst_collect_pads_set_flushing
* win32/common/libgstreamer.def:
export gst_pad_set_acceptcaps_function, gst_structure_empty_new,
gst_value_fraction_multiply
* win32/vs6/gst_inspect.dsp:
add a link to intl.lib
Original commit message from CVS:
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_remove_pad),
(gst_collect_pads_chain):
Handle the case where a pad is removed from the collection
that could cause the other pads to become collectable.
Original commit message from CVS:
* gst/gstelement.c:
Clarify the use of _release_request_pad() and
_get_request_pad() a bit better.
* libs/gst/base/gstadapter.c: (gst_adapter_peek),
(gst_adapter_take_buffer):
Fix some doc and comment typos.
Original commit message from CVS:
* gst/gstsystemclock.c: (gst_system_clock_id_wait_unlocked):
Add debug that can be enabled using a #define at the top of the file,
for dumping stats about how late/early we were when waking up from
waiting on the clock.
Original commit message from CVS:
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_check_pads):
When rebuilding the pad list, don't leak the previous list.
Original commit message from CVS:
Patch by: Lutz Mueller <lutz at topfrose dot de>
* libs/gst/base/gstbasesrc.c: (gst_base_src_class_init),
(gst_base_src_get_query_types), (gst_base_src_update_length):
Publish supported query types.
Update last_stop field in get_range mode so the position
query works. Fixes#342321.
Original commit message from CVS:
Patch by: Alessandro Decina <alessandro at nnva dot org>
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_remove_pad):
Unlock mutex when removing an unknown pad.
Fixes#343334.
* tests/check/Makefile.am:
* tests/check/libs/collectpads.c: (collected_cb), (push_buffer),
(push_event), (setup), (teardown), (GST_START_TEST),
(gst_collect_pads_suite), (main):
Added collecpads check, disabled for now as check crashes for
some reason.
Original commit message from CVS:
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/base/gstcollectpads.c:
(gst_collect_pads_set_flushing_unlocked),
(gst_collect_pads_set_flushing), (gst_collect_pads_start),
(gst_collect_pads_stop):
* libs/gst/base/gstcollectpads.h:
API: gst_collect_pads_set_flushing
Added api to set the pads to flushing, usefull for seeking
code in elements using collectpads.
Clear segment when receiving a flush.
Original commit message from CVS:
* gst/gst.c: (add_path_func), (init_post):
Don't scan registry paths passed via --gst-plugin--path immediately
(will crash, because absolutely nothing is set up and no types are
registered etc.); do this later in init_post(). Fixes#343057.
Original commit message from CVS:
* gst/gst.c: (init_post):
if we have fork, fork while reading/rebuilding the registry
so the parent doesn't take the hit of having all plugins loaded
in memory. Fixes#342777.
* configure.ac:
Check if we have fork()
* win32/common/config.h.in:
no fork() on win32
Original commit message from CVS:
* plugins/elements/gstelements.c:
* plugins/elements/gstfilesrc.c: (gst_file_src_class_init),
(gst_file_src_init), (gst_file_src_set_property),
(gst_file_src_get_property), (gst_file_src_start):
* plugins/elements/gstfilesrc.h:
Add a use-mmap property to enable easier testing of all code paths.
Bump rank to PRIMARY, so filesrc is the preferred file reader and used
in the absence of gnomevfssrc. (Closes#340501)
Original commit message from CVS:
2006-05-26 Zaheer Abbas Merali <zaheerabbas at merali dot org>
* tools/gst-inspect.c:
Add missing include, removes warning of ngettext not being defined on
some arches.
Original commit message from CVS:
* gst/gstvalue.c: (gst_value_deserialize_fraction):
Handle NULL input and output pointers silently as a failed conversion,
rather than g_warnings.
Original commit message from CVS:
* libs/gst/base/gsttypefindhelper.c: (buf_helper_find_peek):
Fix off-by-one bug that would only allow peeks of N-1 bytes
from the start even if the buffer to typefind on contains
in fact N bytes of data (makes vorbis typefinding from a
vorbis identification header buffer work).
* tests/check/Makefile.am:
* tests/check/libs/.cvsignore:
* tests/check/libs/typefindhelper.c: (GST_START_TEST),
(gst_typefindhelper_suite), (main), (foobar_typefind),
(plugin_init):
Add very basic unit test for gst_type_find_helper_for_buffer()
that checks for the problem fixed above.
Original commit message from CVS:
Patch by: Julien Moutte <julien at moutte net>
* docs/gst/gstreamer-sections.txt:
Make new GST_FLOW_IS_SUCCESS macro visible in docs.
* plugins/elements/gstfakesink.c: (gst_fake_sink_class_init),
(gst_fake_sink_preroll):
* plugins/elements/gstfakesink.h:
Add new ::preroll-handoff signal (#337100).
Original commit message from CVS:
* gst/gstpad.c: (gst_flow_get_name), (gst_flow_to_quark):
* gst/gstpad.h:
Added _CUSTOM error and success GstFlowReturn that can be
used be elements internally.
Added macro to check for SUCCESS flowreturns.
API: GST_FLOW_CUSTOM_SUCCESS
API: GST_FLOW_CUSTOM_ERROR
API: GST_FLOW_IS_SUCCESS
* tests/check/gst/gstpad.c: (GST_START_TEST), (gst_pad_suite):
Added check for GstFlowReturn sanity.
Original commit message from CVS:
Patch by: Mark Nauwelaerts <manauw at skynet dot be>
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_remove_pad),
(gst_collect_pads_event):
clear/reset segment info in FLUSH_STOP.
Fixes#336929.
Original commit message from CVS:
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_stop),
(gst_collect_pads_check_collected):
Flush queued buffer on _stop(), fixes playing again (#342454)
Original commit message from CVS:
* docs/faq/developing.xml:
* docs/faq/faq.xml:
* docs/faq/troubleshooting.xml:
* docs/faq/using.xml:
Some minor FAQ updates that won't change the fact that
our FAQ is badly structured, full of information hardly
anyone new to GStreamer needs to know and lacking lots
of information people constantly ask for.
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_set_caps):
Short-circuit gst_pad_set_caps if setting the existing
caps pointer again, and avoid printing debug and
reffing/unreffing the caps.
* plugins/elements/gstqueue.c: (gst_queue_push_one):
There's actually no need to set the caps before pushing -
the acceptcaps method will handle it anyway.
Original commit message from CVS:
* gst/gsttypefind.c: (gst_type_find_get_type):
* gst/gsttypefind.h:
Added GST_TYPE_TYPE_FIND and gst_type_find_get_type() so a GType gets
registered for GstTypeFind pointers. This allows wrapping the structure
in bindings (i.e. gst-python).
Original commit message from CVS:
* plugins/elements/gstcapsfilter.c: (gst_capsfilter_prepare_buf):
The caps intersection algorithm can produce multiple copies of the
caps. Until that is fixed, we need to simplify the result to be
sure whether the allowed caps are fixed or not.
* plugins/elements/gstqueue.c: (gst_queue_init),
(gst_queue_bufferalloc), (gst_queue_acceptcaps),
(gst_queue_push_one):
Proxied buffer alloc should not set the caps on the source pad.
When pushing buffers, we always accept the caps change that triggers.
This prevents negotiation errors caused by caps changing mid-stream
and then being refused on our source pad (because upstream is now
refusing those caps).
Original commit message from CVS:
* tests/examples/helloworld/helloworld.c: (main):
Must plug audioconvert and audioresample between decoder
and audio sink.
Original commit message from CVS:
* gst/gstregistryxml.c: (read_string), (load_pad_template),
(load_feature), (load_plugin):
Allow empty strings for some of the plugin fields so we don't
drop valid plugin entries that were written out correctly.
Original commit message from CVS:
* gst/gstregistryxml.c: (gst_registry_xml_write_cache):
Use g_remove and g_rename instead of remove and rename that don't
handle utf8 characters. rename was failing for users who had specific
characters in their name then the registry was built at each gstreamer init.
* win32/vs6/gst_inspect.dsp:
* win32/vs6/gst_launch.dsp:
* win32/vs6/libgstbase.dsp:
* win32/vs6/libgstcoreelements.dsp:
* win32/vs6/libgstreamer.dsp:
Use a debug version of libxml2 (libxml2D.lib,libxml2D.dll) for DEBUG build
of libgstreamer and clean unused libraries in project links settings.
Original commit message from CVS:
* plugins/elements/gstqueue.c: (gst_queue_push_one):
The queue is not responsible for pushing an EOS when receiving a fatal
flow error. It's up to the real element driving the pipeline to do that.
Original commit message from CVS:
* plugins/elements/gstqueue.c: (gst_queue_push_one):
The queue was posting a non-needed GST_MESSAGE_ERROR when pushing a
buffer returned a fatal error. It should just send an EOS and stop
it's task.
Upstream elements will then properly receive the GST_FLOW_UNEXPECTED
when pushing buffers on the queue and will be able to handle the event.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_get_position):
Don't report POSITION based on clock time if sync is
disabled in a sink.
Original commit message from CVS:
* gst/gstobject.h:
Add cast to make compiler happy - refcount variable was a gint
in GstObject but is a guint in GObject and g_atomic_int_get()
wants a gint *.
Original commit message from CVS:
* tools/gst-launch.c: (print_tag):
Fix use of uninitialized variable in the hypothetical
case that some broken plugin creates a GST_TAG_IMAGE
tag containing a NULL buffer (#341667).
Original commit message from CVS:
* tools/gst-launch.c: (print_tag):
Print something more intelligible for image tags when
using the -t switch (#341556).
Original commit message from CVS:
* Makefile.am:
updates for win32
* configure.ac:
define GST_MAJORMINOR so we have it available in win32/common/config.h
Possibly remove it from our Makefile.am files later
* win32/common/config.h:
* win32/common/config.h.in:
added GST_MAJORMINOR
* win32/common/gstenumtypes.c: (register_gst_resource_error):
* win32/common/gstversion.h:
updated
Original commit message from CVS:
* plugins/elements/gstqueue.c: (gst_queue_chain), (gst_queue_loop),
(gst_queue_set_property):
Don't forget to signal the _chain or _loop function
when the queue size or thresholds change since that might
cause them to make progres again.
Original commit message from CVS:
* gst/gstbuffer.c: (_gst_buffer_initialize):
Register subbufer along with the buffer type so that
it does not accidentally gets registered from N
different streaming threads in a non threadsafe way.
Original commit message from CVS:
* gst/gstbuffer.h:
* gst/gstevent.h:
* gst/gstmessage.h:
Make gtk-doc generate docs for our inlined gst_buffer_ref(),
gst_event_ref() and gst_message_ref() functions again
(ugly hack, please do fix if there's a better way besides
overrides.txt, which doesn't seem to work).
Original commit message from CVS:
2006-05-10 Thomas Vander Stichele <thomas at apestaart dot org>
* libs/gst/check/gstcheck.h:
add an assert for setting state to avoid lots of repetitive code
in the future
Original commit message from CVS:
* gst/gstvalue.c: (gst_value_serialize_flags):
fix a leak if no flags are set
* tests/check/gst/gstvalue.c: (GST_START_TEST):
fix leak in tests
Original commit message from CVS:
* docs/manual/basics-pads.xml:
Expand a bit on caps and filtered links and update
examples that were still using the no longer existing
gst_pad_link_filtered() (#338206).
Original commit message from CVS:
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_finalize),
(gst_collect_pads_add_pad), (gst_collect_pads_remove_pad),
(gst_collect_pads_set_flushing), (gst_collect_pads_start),
(gst_collect_pads_stop):
* libs/gst/base/gstcollectpads.h:
No need to call _stop in _finalize.
Iterate the main pad list in _finalize.
Added some more debug.
Free lists and data in the right order.
Also free data whem doing _remove_pad when stopped for
backward compatibility protect ::started with PAD_LOCK as
well.
Original commit message from CVS:
* gst/gststructure.c: (gst_structure_gtype_from_abbr),
(gst_structure_parse_value):
add some comments
rename a method so that it actually says what it does better
Original commit message from CVS:
* gst/gstevent.c: (_gst_event_initialize):
* gst/gstformat.c: (_gst_format_initialize):
make sure some essential types used by events are registered
as part of gst_init()
* gst/gstvalue.c: (gst_value_serialize_flags):
if no flags are set, serialize them to a value that represents NONE
so that deserializing them works
* tests/check/gst/gstvalue.c: (GST_START_TEST), (gst_value_suite):
add tests for serialization and deserialization of flags
Original commit message from CVS:
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_collect),
(gst_collect_pads_collect_range), (gst_collect_pads_available),
(gst_collect_pads_check_pads), (gst_collect_pads_check_collected),
(gst_collect_pads_event), (gst_collect_pads_chain):
Update docs.
Better debug info.
Catch and return errors from the collect function
Refuse data on eos pads.
Original commit message from CVS:
* gst/gstinterface.h:
GST_IMPLEMENTS_INTERFACE and GST_IS_IMPLEMENTS_INTERFACE use the normal
GInterface type checking.
They were previously using non-defined macros.
Original commit message from CVS:
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_init),
(gst_collect_pads_finalize), (gst_collect_pads_add_pad),
(gst_collect_pads_remove_pad), (gst_collect_pads_set_flushing),
(gst_collect_pads_start), (gst_collect_pads_stop),
(gst_collect_pads_peek), (gst_collect_pads_pop),
(gst_collect_pads_available), (gst_collect_pads_read),
(gst_collect_pads_flush), (gst_collect_pads_check_pads),
(gst_collect_pads_is_collected), (gst_collect_pads_event),
(gst_collect_pads_chain):
* libs/gst/base/gstcollectpads.h:
Clean up the mess that is collectpads, add comments and
FIXMEs where needed.
Maintain a separate pad list so we can add pads while
collecting the other ones. For this we need a new separate
lock (see comics).
Fix memory leak in finalize.
Refactor some weird code to set/unset pad flushing flags, mark
with comments.
Don't crash in _available, _read, _flush when we're EOS.
* tests/check/libs/.cvsignore:
Ignore adapter check binary.
Original commit message from CVS:
* gst/gstbuffer.c: (gst_buffer_make_metadata_writable):
gst_buffer_make_metadata_writable() should maintain the
buffer flags (those that make sense at least) (see #340859).
Original commit message from CVS:
* tools/gst-inspect.c:
* tools/gst-launch.c:
* tools/gst-typefind.c:
* tools/gst-xmlinspect.c:
* tools/tools.h:
Fix up includes: need to include stdlib.h in tools.h for exit().
Original commit message from CVS:
* libs/gst/base/gstbasesrc.c: (gst_base_src_perform_seek),
(gst_base_src_loop), (gst_base_src_change_state):
Always push non-flushing serialized events in the streaming
thread.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_configure_segment):
Add applied_rate to the debug
* libs/gst/base/gstbasesrc.c: (gst_base_src_perform_seek):
Copy applied_rate into the outgoing NEWSEGMENT event
Original commit message from CVS:
Patch by: Philippe Rouquier <philippero at libertysurf dot fr>
* libs/gst/base/gstbasesink.c: (gst_base_sink_set_flushing),
(gst_base_sink_change_state):
call ::unlock before taking the PREROLL_LOCK so we can safely
handle elements that lock in ::render.
Fixes#340174.
Original commit message from CVS:
* autogen.sh: (CONFIGURE_DEF_OPT):
Darwin's libtoolize is in fact called glibtoolize.
Adding glibtoolize to the list of accepted names for libtoolize.
Original commit message from CVS:
* libs/gst/base/gstbasesrc.c: (gst_base_src_loop):
Unify error handling, don't post an error message
when a push() returns EOS but perform our normal EOS
handling code. Fixes#340772.
Original commit message from CVS:
* docs/design/part-overview.txt:
Make upsteam/downstream concepts more clear.
Give an example of serialized/non-serialized events.
* docs/design/part-events.txt:
* docs/design/part-streams.txt:
Mention applied_rate.
* docs/design/part-trickmodes.txt:
Mention applied rate, flesh out some more use cases.
* gst/gstevent.c: (gst_event_new_new_segment),
(gst_event_parse_new_segment), (gst_event_new_new_segment_full),
(gst_event_parse_new_segment_full), (gst_event_new_tag),
(gst_event_parse_tag), (gst_event_new_buffer_size),
(gst_event_parse_buffer_size), (gst_event_new_qos),
(gst_event_parse_qos), (gst_event_parse_seek),
(gst_event_new_navigation):
* gst/gstevent.h:
Add applied_rate field to NEWSEGMENT event.
API: gst_event_new_new_segment_full()
API: gst_event_parse_new_segment_full()
* gst/gstsegment.c: (gst_segment_init), (gst_segment_set_seek),
(gst_segment_set_newsegment), (gst_segment_set_newsegment_full),
(gst_segment_to_stream_time), (gst_segment_to_running_time):
* gst/gstsegment.h:
Add applied_rate to GstSegment structure.
Make calculation of stream_time and running_time more correct
wrt rate/applied_rate.
Add some more docs.
API: GstSegment::applied_rate field
API: gst_segment_set_newsegment_full();
* libs/gst/base/gstbasesink.c: (gst_base_sink_configure_segment),
(gst_base_sink_get_sync_times), (gst_base_sink_get_position):
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_sink_eventfunc),
(gst_base_transform_handle_buffer):
Parse and use applied_rate in the GstSegment field.
* tests/check/gst/gstevent.c: (GST_START_TEST):
Add check for applied_rate field.
* tests/check/gst/gstsegment.c: (GST_START_TEST),
(gstsegments_suite):
Add more checks for various GstSegment operations.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_get_sync_times),
(gst_base_sink_do_sync), (gst_base_sink_chain_unlocked),
(gst_base_sink_get_position), (gst_base_sink_change_state):
Store the sync time of the buffer end position separatly in a
new variable eos_rtime so we can properly sync the EOS event.
Fixes#340697.
Fix the docs for gst_base_sink_set_qos_enabled().
Don't set segment start to invalid value when we receive a
non TIME newsegment.
get closer to handling position reporting for negative rates
correctly.
Original commit message from CVS:
* gst/gstcaps.c:
Docs about how to print caps for debug purposes.
* gst/gstpadtemplate.c: (gst_static_pad_template_get):
use gst_caps_make_writable instead of gst_caps_copy, Fixes#340608
Original commit message from CVS:
* gst/gstelement.c:
use full enum names and preprend a '%' in docs strings to make recent
gtk-doc turn that into a link
Original commit message from CVS:
* docs/manual/basics-bins.xml:
* docs/manual/basics-bus.xml:
* docs/manual/basics-pads.xml:
Some typo fixes, some additions, some clarifications.
Original commit message from CVS:
* tools/gst-inspect.c: (main):
* tools/gst-launch.c: (main):
* tools/gst-run.c: (main):
* tools/gst-typefind.c: (main):
* tools/gst-xmlinspect.c: (main):
Use the string passed to g_option_context_new() for
what it's intended for - the program name is already
printed elsewhere.
Original commit message from CVS:
* tools/Makefile.am:
* tools/gst-inspect.c: (main):
* tools/gst-launch.c: (main):
* tools/gst-xmlinspect.c: (main):
* tools/tools.h:
Add back --version command line option (#340460).
* tools/gst-typefind.c: (have_type_handler), (typefind_file), (main):
Add --version option and use GOption for argument parsing; refactor a
bit; accept directories as arguments and recurse into them; lastly,
print a decent error message when things go wrong.
Original commit message from CVS:
* gst/gstbuffer.h:
* gst/gstminiobject.c:
Add note about refcounting and miniobject/buffer writeability
to docs. Fixes#340604
* gst/gstelementfactory.h:
Added some explanation about @klass.
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_init), (gst_pad_configure_sink),
(gst_pad_configure_src), (gst_pad_push):
Restore acceptcaps checking behaviour now that good plugins have
been released.
Original commit message from CVS:
Patch by: James Andrewartha <trs80 at tartarus uwa edu au>
* gst/gst.c:
* gst/gstbus.c:
* gst/gstclock.c:
* gst/gstevent.c:
* gst/gstformat.c:
* gst/gstmessage.c:
* gst/gstparse.c:
* gst/gstquery.c:
* gst/gstutils.c:
* gst/parse/Makefile.am:
* libs/gst/base/gstadapter.c:
* libs/gst/base/gstbasesrc.c:
* libs/gst/base/gstpushsrc.c:
* libs/gst/base/gsttypefindhelper.c:
* plugins/elements/gstfakesrc.c:
* plugins/elements/gstidentity.c:
Make sure gstprivate.h and/or config.h are
always included first, otherwise some of our
defines (like _FILE_OFFSET_BITS) might be
redefined in the system headers. Fixes build
on opensolaris (#340016).
Original commit message from CVS:
* docs/libs/gstreamer-libs-sections.txt:
API: addition: gst_adapter_take_buffer()
* libs/gst/base/gstadapter.c: (gst_adapter_push),
(gst_adapter_peek), (gst_adapter_take), (gst_adapter_take_buffer),
(gst_adapter_available_fast):
* libs/gst/base/gstadapter.h:
Prepare for optimizing the hell out of this hugely inefficient
piece of code.
Added gst_adapter_take_buffer() so we can at least start thinking
about subbuffering and merging.
Added some comments.
* tests/check/Makefile.am:
* tests/check/libs/adapter.c: (GST_START_TEST),
(gst_adapter_suite), (main):
Added GstAdapter check.
Original commit message from CVS:
* docs/libs/gstreamer-libs-sections.txt:
make sure GstBaseTransformClass shows up in the docs
* libs/gst/base/gstbasetransform.c:
* libs/gst/base/gstbasetransform.h:
move docs so gtk-doc picks it up now
Original commit message from CVS:
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_event):
back out the newsegment handling change, see #340060 for ongoing
discussion
Original commit message from CVS:
* tools/gst-run.c: (get_candidates), (main):
Fix wrong g_file_test() usage (see glib docs for why it doesn't
work); fix typo in error message. Fixes#340079.
Original commit message from CVS:
2006-04-29 Thomas Vander Stichele <thomas at apestaart dot org>
* tests/check/gst/gstghostpad.c: (GST_START_TEST):
add more asserts on refcounts
do more cleanup at end of tests
fix test leaks showing in FC5
Original commit message from CVS:
* plugins/elements/gsttypefindelement.c:
(gst_type_find_element_handle_event):
reverted wrong change and reflowed code to avoid others falling into
this trap
Original commit message from CVS:
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_event):
fix changelog entry about last collectpads change,
add notes about proper fix
Original commit message from CVS:
* gst/gst.c:
* gst/gstregistry.c: (gst_registry_scan_path_level),
(gst_registry_scan_path):
* gst/gstregistry.h:
only write out registry if it has changed, fixes#338339
Original commit message from CVS:
* gst/gst.c:
* gst/gstregistry.c: (gst_registry_scan_path_level),
(gst_registry_scan_path):
* gst/gstregistry.h:
only write out registry if it has changed, fixes#338339
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_event):
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_base_init),
(gst_collect_pads_is_collected), (gst_collect_pads_event):
more detailed debug and formatting cleanup
Original commit message from CVS:
* libs/gst/controller/gstcontroller.c:
(gst_controller_sync_values):
some little tuning
* tests/check/libs/controller.c: (GST_START_TEST),
(gst_controller_suite):
a new test for live value handling
Original commit message from CVS:
* gst/gstvalue.c: (gst_value_serialize_flags):
Avoid NULL dereference when trying to serialize flags containing
invalid values.
Original commit message from CVS:
* plugins/elements/gsttypefindelement.c:
(gst_type_find_element_handle_event):
If we get EOS before any data is accumulated, don't use
uninitialised local variables.
Original commit message from CVS:
* libs/gst/dataprotocol/dataprotocol.c: (gst_dp_packet_from_event),
(gst_dp_event_from_packet):
Fixes in reading/writing events over GDP (not currently used?) -
dereferencing NULL events for unknown/invalid event types, memory
leak, and change g_warning to GST_WARNING.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_is_too_late),
(gst_base_sink_do_render_stats), (gst_base_sink_render_object),
(gst_base_sink_get_position), (gst_base_sink_change_state):
When frame dropping is enabled, we should not ignore frames
without a duration.
Update some documentation.
Original commit message from CVS:
* plugins/elements/gstfdsink.c: (gst_fd_sink_render),
(gst_fd_sink_check_fd), (gst_fd_sink_update_fd):
handle EAGAIN, EINTR and short writes correctly. Also clean
up some error cases, avoid a deadlock on bad file descriptors and
use GST_DEBUG_OBJECT.
Fixes#339843
Original commit message from CVS:
* gst/gstvalue.c: (gst_value_serialize_buffer),
(gst_value_deserialize_buffer):
Don't try to serialize a GValue with a NULL buffer.
Fixes#339821.
* tests/check/gst/gstvalue.c: (GST_START_TEST), (gst_value_suite):
Added check for serialisation of NULL buffers.
Original commit message from CVS:
* gst/gstminiobject.c: (gst_value_take_mini_object):
Taking a NULL miniobject is valid, fix the case where
we try to unref the NULL miniobject.
Original commit message from CVS:
Patch by: Stefan Kost <ensonic at sonicpulse dot de>
* gst/gstbin.c: (gst_bin_handle_message_func):
Update docs.
Don't leak bin refcount when a state recalc is
in progress and we delay another one #339808.
Original commit message from CVS:
* docs/design/part-TODO.txt:
Mention QoS as an ongoing work item.
* docs/design/part-buffering.txt:
New doc about buffering that needs to be fleshed out
at some point.
* docs/design/part-qos.txt:
More QoS policy for decoders/demuxers/transforms
* docs/design/part-trickmodes.txt:
Small update.
Original commit message from CVS:
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/controller/gstcontroller.c: (gst_controller_unset),
(gst_controller_unset_all):
* libs/gst/controller/gstcontroller.h:
Added new method _unset_all() and fixed _unset()
* tests/check/libs/controller.c: (GST_START_TEST),
(gst_controller_suite):
Added two testcases for new and fixed method
Original commit message from CVS:
* libs/gst/net/gstnettimepacket.c: (gst_net_time_packet_send):
MSG_DONTWAIT is not defined on Cygwin, so work
around that (fixes#317048).
Original commit message from CVS:
* gst/gstelementfactory.c: (gst_element_register),
(gst_element_factory_create), (gst_element_factory_make):
Some cleanups.
Fixed a FIXME.
Updated docs (Fixes#131079)
* gst/gstpluginfeature.c: (gst_plugin_feature_load):
Small cleanups.
* tests/check/gst/gstelement.c: (GST_START_TEST),
(gst_element_suite):
Added testcase for elementfactory class field.
Original commit message from CVS:
* gst/gstsegment.c:
Added some more docs.
* libs/gst/base/gstbasesink.c: (gst_base_sink_perform_qos),
(gst_base_sink_reset_qos):
Calculate more accurate rate values.
Original commit message from CVS:
* gst/gst_private.h:
add a new #ifdef to use __declspec(dllimport) only for
other modules and not for gstreamer core
* gst/gstbasesink.c: (gst_base_sink_perform_qos):
use gst_guint64_to_gdouble for conversion
* win32/common/libgstreamer.def:
add new exported functions
* win32/vs6/gst_inspect.dsp:
* win32/vs6/gst_launch.dsp:
* win32/vs6/libgstbase.dsp:
* win32/vs6/libgstcontroller.dsp:
* win32/vs6/libgstcoreelements.dsp:
* win32/vs6/libgstdataprotocol.dsp:
* win32/vs6/libgstnet.dsp:
update project files
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_link):
Must set peer pads before calling the link function, otherwise
a task started from a link function might get a flow-not-linked
result when trying to push because the other thread where the
linking happens hasn't had a chance to set the peers yet. This
might happen for example when a queue gets linked to a downstream
element, as queue starts a streaming task when its source pad
gets linked. Happens in real life when playing back flac/musepack
files in playbin (#332390).
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_get_sync_times):
Be a bit nicer to badly behaving upstream elements that expect
us to deal with non TIME segments and timestamps (such as fakesrc
in the testsuite).
Original commit message from CVS:
* gst/gstbus.c:
Small documentation clarification about the signal watch.
* libs/gst/base/gstbasesink.c: (gst_base_sink_get_sync_times),
(gst_base_sink_wait_clock), (gst_base_sink_do_sync),
(gst_base_sink_perform_qos), (gst_base_sink_reset_qos),
(gst_base_sink_do_render_stats), (gst_base_sink_render_object),
(gst_base_sink_get_position_last),
(gst_base_sink_get_position_paused), (gst_base_sink_change_state):
Convert and store timestamps in stream time and running time, the
raw timestamps are not usefull, also document this better.
Use different window sizes for good and bad QoS observations so
we react to badness a little quicker.
Keep track of the amount of rendered and dropped buffers.
Send QoS timestamps in running time.
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_sink_eventfunc),
(gst_base_transform_handle_buffer):
Compare QoS timestamps against running time.
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_set_property):
Use g_value_get_object() instead of g_value_dup_gst_object(),
to avoid double-reffing the pad template (which we then sink,
so this worked previously if (and only if) the pad template
was floating.
* gst/gstpadtemplate.c: (gst_pad_template_init),
(gst_pad_template_pad_created):
Never return floating references to pad templates, create
them as initially-sunken.
Document an extra function (and make this stop sinking our
pad template, since that is now guaranteed to do nothing,
since we created it sunken).
* gst/gstghostpad.c:
Fix docs typo.
Original commit message from CVS:
* gst/parse/grammar.y:
Fix a leak in parse-launch for any source-or-sink named element
references used.
* tests/check/pipelines/parse-launch.c: (expected_fail_pipe):
Unref the pipeline if it exists after we've failed parsing.
Original commit message from CVS:
* gst/gstpipeline.c: (gst_pipeline_init):
When we create a pipeline bus, initially create it in flushing mode.
Fixes leaks in at least one test, and makes a new pipeline work the
same as one that has gone to READY and then back to NULL.
* gst/gstelement.c:
Typo fix in docs.
