Tim-Philipp Müller
c8c9b0f35d
qtdemux: move stco, stts, stss and stps atom parsing over to GstByteReader
...
Make sure we don't read beyond the atom boundary. Note that the code
behaves slightly differently in the corner case where there is not
enough atom data for the specified number of samples (n_samples_time)
in the atom, but still enough data to fill the pre-allocated index of
n_samples entries: before we would just stop parsing the stts data
and continue, whereas now we will likely error out. This should not
be a problem in practice though. We could maintain the old behaviour
by doing reads with a size check inside the loop if needed.
2009-09-23 16:54:42 +01:00
Tim-Philipp Müller
4be46b1586
qtdemux: use bytereader to parse stsz and stsc atoms
...
Use GstByteReader to parse stsz and stsc chunks, and check size of
available data before parsing it, instead of blindly assuming there
will be enough data. Fixes crashes with some fuzzed/broken files.
2009-09-23 16:54:42 +01:00
Tim-Philipp Müller
5875e2016a
qtdemux: add qt_atom_parser_get_offset() and optimise _peek_sub()
2009-09-23 16:54:42 +01:00
Tim-Philipp Müller
410ebb7eb3
qtdemux: add QtAtomParser, an inlined GstByteReader variant
2009-09-23 16:54:41 +01:00
Mark Nauwelaerts
02581dd2a5
matroskademux: use proper order for no-more-pads and newsegment and tag sending
2009-09-23 17:24:22 +02:00
Mark Nauwelaerts
702df566c3
matroskademux: sprinkle a few branch prediction macros
2009-09-23 17:24:22 +02:00
Alessandro Decina
195883b30a
Fix compile warnings with gcc 4.0.1.
2009-09-22 15:04:36 +02:00
Jan Schmidt
600516be90
matroskamux: Don't get stuck in an infinite loop with Dirac
...
At the end, Dirac streams have an EOS packet with 0 length.
Don't ever sit in an infinite loop when processing one. Allows
muxing Dirac into mkv to complete successfully.
2009-09-22 11:50:11 +01:00
Tim-Philipp Müller
123181a114
Update .gitignore
2009-09-22 11:03:46 +01:00
Tim-Philipp Müller
0506545b04
videomixer: fix up Makefile some more
...
Remove CFLAGS from LIBADD and make order of the various CFLAGS and
LIBS at least consistent with each other.
2009-09-22 11:02:02 +01:00
Brian Cameron
341be447a6
videomixer: Add $(GST_PLUGINS_BASE_LIBS) to LDFLAGS for linking libgstvideo
...
Fixes bug #595897 .
2009-09-22 08:09:39 +02:00
Wim Taymans
10eb1a0ff4
avi: fix timestamps in push mode
2009-09-21 18:10:12 +02:00
Stefan Kost
253f43203d
jpegdec: add a G_UNLIKELY and put perf-cat log to code path that copies
2009-09-21 16:07:50 +03:00
Wim Taymans
2f26ee4285
avi: add some performance measurements
...
Measure the performance of various index and header parsing steps to the
PERFORMANCE debug category.
2009-09-21 12:32:51 +02:00
Mark Nauwelaerts
50c41acdff
speexdec: allow for unknown varying number of frames per buffer
...
In particular, this caters for RTP payloads with multiple frames
per packet.
2009-09-18 14:46:38 +02:00
Mark Nauwelaerts
35f9efac88
speexdec: use correct sample size in conversions
2009-09-18 14:46:38 +02:00
Mark Nauwelaerts
f4482e4ae3
speexenc: fix buffer time and duration for multiple frames per packet
2009-09-18 14:46:38 +02:00
Stefan Kost
0868ddf30f
avidemux: some logging cleanup to help understanding the index parsing overhead
2009-09-18 14:27:45 +03:00
David Schleef
19ae44f4e0
osxaudio: link against GST_BASE_LIBS
2009-09-16 13:28:27 -07:00
Olivier Crête
750387f520
rtpg729pay: Fix adapter leak
...
The adapter would be leaked if it was empty and the data could be pushed out directly.
2009-09-15 17:24:24 -04:00
Sebastian Dröge
317d6e18a2
pulsesrc: Don't dereference NULL pointers
...
pa_stream_get_timing_info() can return NULL.
Fixes bug #595220 .
2009-09-15 10:05:51 +02:00
David Henningsson
bb787f1030
pulsesink: Don't dereference NULL pointers
...
pa_stream_get_timing_info() can return NULL.
Fixes bug #595220 .
2009-09-15 10:05:51 +02:00
Wim Taymans
ccda761562
pulsesink: handle stream events
...
Handle stream events and request a PAUSE/PLAY state change from the application
when we receive a CORK/UNCORK event.
2009-09-14 16:05:30 +02:00
David Schleef
78eeb6636e
multifilesink: Add next-file property
...
Add a property to allow control over what event causes a file
to finish being written and a new file start. The default is
the same as before -- each buffer causes a new file to be
written. Added is a case where buffers are written to the
same file until a discontinuity in the stream.
2009-09-13 20:00:53 -07:00
David Schleef
903c79e767
dvdemux: Use values from decoder structure directly
...
Don't store the same values in the GstDvDemux. This
fixes a bug where dvdemux would detect a stream as PAL
instead of NTSC, and silently parse it wrong.
2009-09-13 19:59:45 -07:00
David Schleef
29173242bb
dvdemux: Add code to parse SMPTE time codes
...
Code to convert time codes to/from timestamps and frame numbers.
2009-09-13 13:22:35 -07:00
David Schleef
1b57f19509
dvdemux: Fix detection of new media
...
There are 5 or 6 AAUX source control packs in a frame, and any
of them could have REC_ST cleared, indicating a recording start
point. libdv only checks the first.
2009-09-13 12:34:07 -07:00
Edward Hervey
b1dab0fce1
dvdemux: Set DISCONT flag on buffers when REC_ST flag is set.
...
Also add a few branch prediction macros
2009-09-12 19:26:56 +02:00
Jan Schmidt
7c2489ca77
check: Fix a couple of tests.
...
The souphttpsrc test wasn't compiling. The soup-misc.h header is needed for
soup_ssl_supported.
Fix the y4menc test to use a 'progressive' header for the test data now that
the element outputs correct interlacing info.
2009-09-12 00:13:04 +01:00
Michael Smith
3257374310
wavparse: treat a zero-sized data chunk as extending to the end of the file.
...
This fixes playback of some files that don't have a valid data chunk length,
apparently some program creates these.
2009-09-11 13:34:01 -07:00
Stefan Kost
00ffa9c2dd
v4l2src: add a function pointer for get_frame function and optimize a bit
...
Use a function-pointer for mmap/read, as this can't change during capture. Also
sprinkle a few G_LIKELY/UNLIKELY to improve the error-less code path.
2009-09-11 22:24:47 +03:00
Stefan Kost
1a945a32cc
v4l2: log buffer copies on queue underrun in perf category
...
v4l2src has a slow path where it does buffer-copies when it runs out of queued
buffers. Log this to performance category to help monitoring it.
2009-09-11 22:19:23 +03:00
Sebastian Dröge
0c50816aaa
pulsesink: Implement GstStreamVolume interface
2009-09-11 16:38:03 +02:00
Sebastian Dröge
7fb6ad6d4c
pulsesink: Implement mute property
2009-09-11 16:38:03 +02:00
Wim Taymans
d4316e74fc
gdkpixbufsink: fix docs refering to send-messages
2009-09-11 13:33:31 +02:00
Wim Taymans
445236a769
spectrum: add post-messages property
...
Add a post-messages property and deprecate the less descriptive message
property.
2009-09-11 13:28:35 +02:00
Wim Taymans
9fb92af2df
pixbufsink: add post-messages property
...
Add post-messages and deprecate send-messages as the former is more
descriptive of what actually happens.
2009-09-11 13:20:06 +02:00
Wim Taymans
1935483fbf
multifilesink: rename silent to post-messages
...
Use the post-messages property name instead of silent as it is more
descriptive.
2009-09-11 13:12:54 +02:00
Wim Taymans
f68cd7e708
multifilesink: post messages for each buffer
...
Add a silent property that can be set to FALSE to post messages on the bus for
each written file.
Do some more cleanups.
Add some docs.
Fixes #594663
2009-09-11 12:17:21 +02:00
Olivier Crête
411c71da13
rtph263pay: Allocate Boundry structs on the stack instead of the heap to avoid leaks
...
Fixes bug #594691 .
2009-09-11 07:31:38 +02:00
Stefan Kost
0a7ef67ad0
docs: fix gtk-doc warnings
2009-09-10 10:28:48 +03:00
Stefan Kost
0a68003efe
docs: fix gtk-doc warnings
2009-09-10 10:26:23 +03:00
David Schleef
3dc2c2472c
dv1394src: Add a clock based on isochronous cycle counter
...
Partial fix for #169383 .
2009-09-09 18:19:56 -07:00
Sebastian Dröge
a9909c1abf
videobox: Fix AYUV->I420 conversion
...
For this fix the averaging of the chroma values. It should't be (a/2 + b)/2
but just (a + b)/2.
Fixes bug #594599 .
2009-09-09 16:28:53 +02:00
Wim Taymans
42ee5e22a2
pulsesink: remove ringbuffer reset compensation
...
Remove the code to deal with a ringbuffer reset as this code is now in the base
class.
Bump the -base requirement as we need the new baseaudiosink code to function
properly.
2009-09-09 16:25:06 +02:00
Wim Taymans
75a48e238a
pulsesink: whitespace fixes
2009-09-09 16:24:49 +02:00
Wim Taymans
5580571f8d
whitespace fixes
2009-09-09 10:27:55 +02:00
Wim Taymans
ca7bec0d65
pulse: small cleanups
...
Add some debug info
Fix the state changes
2009-09-08 19:34:09 +02:00
Marc-André Lureau
fe2d8bdc64
multipartmux: mark data buffer as delta-unit
...
So that multifdsink always start sending header buffer first
Fixes #594520
2009-09-08 18:34:49 +02:00
Marc Leeman
6b46aeb6a3
rtpbin: add ignore-pt parameter
...
Add a parameter 'ignore-pt' that disables creating a gstrtpptdemux module and
ghosts the pads of gstrtpjitterbuffer instead of the ones of gstrtpptdemux.
Fixes #594490
2009-09-08 17:38:32 +02:00