Commit graph

476 commits

Author SHA1 Message Date
Robert Swain
2723de585e qtdemux: add durations modulo 1<<32
For calculating the durations of each sample, we are supposed to add each
duration modulo 1<<32 so make the elapsed time counter a uint32.

Fixes #610280
2010-02-17 18:06:29 +01:00
Mark Nauwelaerts
d14685eb08 qtdemux: fix ALAC codec-data handling
ALAC codec-data apparently comes in (at least) two flavours (mov, mp4),
so use atom based parsing to retrieve required data, rather than
aiming for a specific offset.

See also #580731.
2010-02-16 16:22:28 +01:00
Mark Nauwelaerts
105d8c925b qtdemux: fix debug message 2010-02-16 16:09:36 +01:00
Mark Nauwelaerts
58d84a993c qtdemux: handle signed values in 3GPP location tag 2010-02-16 16:09:26 +01:00
Robert Swain
e2f5409d40 qtdemux: Fix frame rate cap regression
Look for a non-zero min_duration during initialisation to avoid
incorrect frame rate caps.
2010-02-16 14:44:11 +01:00
Robert Swain
4aff3e48be qtdemux: temporary safety check to avoid crashes with a certain file
Add temporary check to avoid crashes with a certain file when seeking
until the real cause of this is figured out. See #609405.
2010-02-10 20:36:56 +00:00
Robert Swain
7877ffb6f5 qtdemux: skip unknown atoms when looking for moov
Fixes bug #609107
2010-02-07 10:56:02 +01:00
Robert Swain
9ed6c58006 qtdemux: Set the segment start time to the requested seek time for non-keyframe seeks 2010-02-04 18:54:58 +00:00
Robert Swain
8d4f70c5ce qtdemux: Fix time returned for index at a byte offset
The logic for searching forwards/backwards was swapped
2010-02-04 18:54:53 +00:00
Edward Hervey
cb0474b6b3 qtdemux: dmb1 is a valid fourcc for Motion-JPEG 2010-01-23 14:47:55 +01:00
Edward Hervey
a782ef3ce8 qtdeux: IV32 is also used for Indeo 3 video streams 2010-01-23 14:20:02 +01:00
Roland Krikava
8a80fdaad1 qtdemux: Avoid negative overflow on keyframe search
Do not overflow negatively when searching a previous
"keyframe" on audio streams. Could cause infinite loops
on backwards playback

Fixes #607718
2010-01-21 23:20:34 -03:00
Alessandro Decina
5d3d3f28e1 qtdemux: fix compiler warnings under OS X. 2010-01-21 19:24:22 +01:00
Mark Nauwelaerts
8ca984d5e8 qtdemux: always keep media segments within total duration
... as opposed to only doing so following a seek.
2010-01-20 16:03:21 +01:00
Thiago Santos
e61a71b490 qtdemux: g_free is NULL safe 2010-01-15 13:42:30 -03:00
Thiago Santos
b07f406634 qtdemux: use DEMUX errors, instead of DECODE
qtdemux should use DEMUX errors, and not DECODE

Conflicts:

	gst/qtdemux/qtdemux.c
2010-01-15 13:42:30 -03:00
Thiago Santos
b988ff4f57 qtdemux: Minor refactor
Replace repeated code with a function call
2010-01-15 13:42:30 -03:00
Thiago Santos
92a83e016a qtdemux: Handle another kind of redirect trak
Some traks might contain a redirect rtsp uri inside
hndl atom (which is a dref atom entry). This commit makes qtdemux
post a message when it finds one of these traks and there are
no other traks.

Fixes #597497
2010-01-15 13:42:29 -03:00
Thiago Santos
06de494640 qtdemux: Post error when reaching EOS without pads
Post an error when EOS is reached and there are no src pads
2010-01-15 13:42:22 -03:00
Thiago Santos
b53a45ed44 qtdemux: Do not post empty redirect messages
Some misinterpreted data could result in posting redirect messages
with empty redirect strings. It is better not to post them.

An example is the file on bug #597497
2010-01-15 13:13:59 -03:00
Edward Hervey
3f5add8820 qtdemux: use G_GSIZE_FORMAT for platform independent gsize qualifier
Fixes build on macosx
2010-01-12 17:39:05 +01:00
Michael Smith
144fbd2d8f qtdemux: fix offset for type 2 mp4a sound sample descriptions.
Allows us to correctly find the esds (and thus the codec data) for such
mp4a files.
2010-01-11 11:48:29 -08:00
Robert Swain
866d13e7b9 qtdemux: Oops. The gpointer cast is needed because of the const
qualifiers on the data elements
2010-01-11 10:38:10 +01:00
Robert Swain
4ac643c2d9 qtdemux: Debug -> info level for a message for benchmarking index parsing
The extra message output at higher levels affects the accuracy of the
benchmark.
2010-01-11 10:17:54 +01:00
Robert Swain
c93ea637ef qtdemux: Don't check for NULL pointers or cast to gpointer as this is
not needed
2010-01-11 10:05:10 +01:00
Robert Swain
a340359127 qtdemux: Refactor stbl sub-atom freeing. Free when index has been
completely parsed.
2010-01-11 09:50:33 +01:00
Robert Swain
3daf1871c1 qtdemux: Avoid whitespace commits due to inconsistent GNU indent
behaviour
2010-01-11 09:50:33 +01:00
Tim-Philipp Müller
e1bff64f00 qtdemux: remove newline at end of debug statement 2010-01-11 00:10:34 +00:00
Michael Smith
7f442ab1c1 qtdemux: Add support for wave-style audio in qt.
Uses gstriff to parse the wave headers appropriately. Tested with MS-ADPCM
content.
2010-01-05 12:11:31 -08:00
Wim Taymans
48615d5e98 qtdemux: fix chunk counter 2010-01-05 15:51:55 +01:00
Wim Taymans
17630760f4 qtdemux: more work at reducing loop overhead
Try to avoid derefs when parsing the index. Save the state into the structures
when we exit the loop instead of for each iteration.
2010-01-05 15:51:52 +01:00
Wim Taymans
91a5e5138f qtdemux: cleanups and make duration more accurate
Make the QtDemuxSample struct smaller by keeping the duration and the pts_offset
as their 32 bit values.
Make some macros to calculate PTS, DTS and duration of a sample.
Deref the sample index less often by keeping a ref to the sample we're dealing
with.
2010-01-05 15:51:50 +01:00
Wim Taymans
22eb18f828 qtdemux: simplify logic to calculate duration
Since we no longer store the timestamp and duration in nanoseconds, we can now
simply store the duration as-is.
2010-01-05 15:51:48 +01:00
Robert Swain
1c27ed4dae qtdemux: Store timestamps in mov format in the index
This allows faster building of the index upon seeks so that scaling of
timestamps only occurs when actually needed.
2010-01-05 15:51:45 +01:00
Wim Taymans
86021857c5 qtdemux: make seeking in push mode work
Move sample position checks into qtdemux_parse_samples where we can protect it
with a lock.
Refactor and make an qtdemux_ensure_index function.
Rename qtdemux_do_push_seek to qtdemux_seek_offset in order to avoid confusion
with gst_qtdemux_do_push_seek.
2010-01-05 15:51:43 +01:00
Wim Taymans
3b643817be qtdemux: move error code out of normal flow 2010-01-05 15:51:40 +01:00
Robert Swain
4b2b7067b6 qtdemux: Add push mode seek support for seeking to obtain the moov atom 2010-01-05 15:51:36 +01:00
Arun Raghavan
e9f9164fb6 qtdemux: Add tags for average and maximum bitrate
Fixes #599300.
2009-12-31 18:25:20 +00:00
Thiago Santos
5d86010dad qtdemux: perf tag should map to GST_TAG_ARTIST 2009-12-24 17:06:16 -03:00
Jonathan Conder
1112090589 qtdemux: Adds new tags
Adds some new tags mapping to qtdemux.

Fixes #599759
2009-12-21 12:03:30 -03:00
Wim Taymans
cc277b4a26 qtdemux: Fix ALAC codec_data parsing
Fixes #604611
2009-12-17 16:23:56 +01:00
Thiago Santos
4063bb87e8 qtdemux: Remove cpp style coments
Removes // comments and replace them with /* */ comments
2009-12-16 17:28:30 -03:00
Tim-Philipp Müller
6c4c8f8670 qtdemux: fix up language code extraction some more
Quicktime uses ISO 639-2 for language codes, but GST_TAG_LANGUAGE
is supposed to hold a ISO 639-1 code, so convert as needed using
the new API from -base.

See #602126.
2009-12-13 13:10:12 +00:00
Thiago Santos
52177fa056 Revert "qtdemux: Correctly parse classification tags"
This reverts commit cd883aa60c.

Previous code was correct, 4 is due to table and language code,
not only language code
2009-12-12 17:44:04 -03:00
Thiago Santos
cd883aa60c qtdemux: Correctly parse classification tags
In clsf atoms, the language code is 2 bytes long, not 4.
2009-12-12 16:31:35 -03:00
Thiago Santos
ff4ac9ddf6 qtdemux: fix debug message printf args
Fixes debug message printf format to make it build in mac's gcc
2009-12-03 17:49:55 -03:00
Mark Nauwelaerts
baa28ddedf qtdemux: fix timestamp datatype 2009-11-26 17:29:03 +01:00
Robert Swain
98279be735 qtdemux: Fix push mode by making sure stbl information is available in
next_entry_size ()
2009-11-24 16:40:19 +01:00
Robert Swain
db5de8f1b6 qtdemux: Fix order of arguments in log message 2009-11-24 16:35:20 +01:00
Robert Swain
f9745e89d3 qtdemux: Ease debugging by removing a goto for an error message 2009-11-23 16:29:15 +01:00
Robert Swain
4025d7cbd7 qtdemux: Parse per sample rather than all at once but build complete index when
seeking
2009-11-23 16:29:15 +01:00
Robert Swain
0c62109d20 qtdemux: Save atom data for later use so it doesn't get freed after initial
parsing
2009-11-23 16:29:15 +01:00
Robert Swain
29c33806c1 qtdemux: Parse from the previously parsed sample up to sample n 2009-11-23 16:29:14 +01:00
Robert Swain
52b1040219 qtdemux: Make qtdemux_parse_samples () parse up to n samples 2009-11-23 16:29:14 +01:00
Robert Swain
1f7b878d89 qtdemux: Separate off stbl sub-atom initialisation 2009-11-23 16:29:14 +01:00
Robert Swain
6a6d2c4970 qtdemux: Move variables into context in preparation for refactorisation 2009-11-23 16:29:14 +01:00
Robert Swain
ab61fb22f6 qtdemux: Fix bug where stps is never parsed due to logic error 2009-11-23 16:29:14 +01:00
Robert Swain
a1e2047472 qtdemux: Port ctts from Gnode * to GstByteReader 2009-11-23 16:29:14 +01:00
Robert Swain
9e49197208 qtdemux: Switch from QtAtomParser to GstByteReader 2009-11-23 16:29:14 +01:00
Wim Taymans
5d41590601 qtdemux: fix typo and grammar 2009-11-23 12:53:50 +01:00
Thiago Santos
e35085e5b5 qtdemux: Add more fields to SVQ3 caps
qtdemux only added the whole stsd atom as 'codec_data'
in its output caps for SVQ3. This patch makes it add
the SEQH (inside a SMI atom) and a gamma field (taken
from the gama atom) if available.

Fixes #587922
2009-11-18 16:41:50 -03:00
Mark Nauwelaerts
bf5f3a3964 qtdemux: fix bogus memory chunk size check 2009-11-18 12:54:48 +01:00
Michael Smith
fe9415544e qtdemux: identify IMA adpcm in qt properly. 2009-11-17 17:59:13 -08:00
Edward Hervey
8df3e5c22b qtdemux: init variables to make compiler on osx build bot happy 2009-11-04 16:47:42 +01:00
Tim-Philipp Müller
261454dd92 qtdemux: init variables to make compiler on osx build bot happy 2009-11-03 16:05:47 +00:00
Andy Wingo
c917d65e6d qtdemux: unpack more information into image/x-j2c caps
* gst/qtdemux/qtdemux_fourcc.h: Add new fourccs for use by the mj2
  unpacker.
* gst/qtdemux/qtdemux.c (qtdemux_parse_trak): Unpack JPEG2000 component
  mapping and channel definitions from the jp2h header. Will add
  component-map and channel-definitions elements to the caps if the
  component maps or channel definitions are nonstandard, where standard
  order means RGB, 444 packed YUV, or greyscale, with no alpha channel.

Fixes #598915.
2009-10-20 17:20:55 +02:00
Mark Nauwelaerts
354a062c89 qtdemux: check some more atom sizes prior to parsing 2009-10-15 17:06:41 +02:00
Mark Nauwelaerts
e967767b27 qtdemux: add GstIndex support 2009-10-14 13:15:02 +02:00
Jan Schmidt
99f43dbb58 qtdemux: Fix uninitialized variable warning
Fix another bogus may-be-used-uninitialized warning in qtdemux
2009-10-13 16:03:13 +01:00
Jan Schmidt
42b09362f6 qtdemux: Fix uninitialized variable warnings
The gcc on the OS/X buildbot complains about these variables not being
initialized, even though they can't possibly actually be used
uninitialized.
2009-10-13 00:12:42 +01:00
Mark Nauwelaerts
6f34e2b0db qtdemux: also consider Quicktime text subtitles 2009-10-09 17:49:20 +02:00
Mark Nauwelaerts
955a719c1a qtdemux: provide language tag for stream 2009-10-09 17:49:17 +02:00
Mark Nauwelaerts
1210a92ff6 qtdemux: refactor common parts in track parsing 2009-10-09 17:49:14 +02:00
Mark Nauwelaerts
5ed2c3e562 qtdemux: refactor buffer processing and sending
... so it can be used in both pull and push based mode.
2009-10-09 17:49:12 +02:00
Mark Nauwelaerts
674b0c4289 qtdemux: extract palette data for dvd subpicture streams
... and send it downstream using custom dvd event
2009-10-09 17:49:10 +02:00
Mark Nauwelaerts
b2d70862e8 qtdemux: support 3GPP timed text subtitles
In particular, also make subtitle support less subp(icture)-centric.
2009-10-09 17:49:06 +02:00
Mark Nauwelaerts
faaa32dccb qtdemux: NULL is not a valid taglist 2009-10-09 17:49:04 +02:00
Mark Nauwelaerts
533106203c qtdemux: recognize some more encypted track cases 2009-10-09 17:49:02 +02:00
Josep Torra
c3d3eb6c3b qtdemux: fix warnings building on macosx 2009-10-09 11:54:03 +02:00
Stefan Kost
e0cdd879b4 build: fprintf, sprintf, sscanf need stdio.h 2009-10-07 14:03:20 +03:00
Tim-Philipp Müller
45ff905771 qtdemux: make sure compatible brands buffer exists before dereferencing it 2009-10-05 11:46:08 +01:00
Robert Swain
c7b5df91a9 qtdemux: fix printf warnings on OSX
Cast variables passed to printf to avoid warnings about incorrect
formats (most likely caused by sizeof returning a size_t).

Fixes #597348.
2009-10-05 00:35:15 +01:00
Tim-Philipp Müller
4590daf202 qtdemux: remove internal genre table
No need to maintain our own genre table in qtdemux. The genres are
identical to the ID3 genres, so we can just use libgsttag's
gst_tag_id3_genre_get() to look them up.
2009-10-05 00:26:44 +01:00
Mark Nauwelaerts
0fac7b5347 qtdemux: some optional QT specified stsd MPEG-4 atoms also apply to H264
Fixes #596319.
2009-09-25 19:23:15 +02:00
Mark Nauwelaerts
e21d16a4f8 qtdemux: only send tag events downstream after newsegment 2009-09-25 16:47:42 +02:00
Wim Taymans
03f46a42e5 qtdemux: add durations modulo 1<<32
For calculating the durations of each sample, we are supposed to add each
duration modulo 1<<32 so make the elapsed time counter a uint32.

Fixes #595942
2009-09-25 11:54:06 +02:00
Wim Taymans
4e114a2b24 qtdemux: small cleanup 2009-09-24 20:38:54 +02:00
Tim-Philipp Müller
01e00ba1cd qtdemux: don't use core API that doesn't exist yet
There's no gst_byte_reader_has_remaining() yet. Fixes build.
2009-09-24 19:33:39 +01:00
Tim-Philipp Müller
fab4113c24 qtdemux: map some atomparser functions to their new bytereader equivalents
Now that GstByteReader has unchecked and inlined variants as well, map
atomparser functions to their respective bytereader equivalents.
2009-09-24 16:34:08 +01:00
Tim-Philipp Müller
0f197776e1 qtdemux: add qt_atom_parser_has_chunks() and fix indentation 2009-09-24 16:32:02 +01:00
Tim-Philipp Müller
f65e6ea3a1 qtdemux: bail out instead of trying to alloc silly index sizes
If it looks like we would be allocating a silly size for our sample
index, just bail out instead of trying to allocate it. Helps with
broken or fuzzed files where we might end up trying to malloc a
couple of hundred MBs otherwise.
2009-09-24 16:29:26 +01:00
Tim-Philipp Müller
abaf91e428 qtdemux: error out correctly if we don't even have enough bytes for an atom header 2009-09-24 16:29:25 +01:00
Tim-Philipp Müller
25db7df49b qtdemux: init fourcc to 0 as well to avoid invalid reads when printf'ing error message 2009-09-24 16:29:25 +01:00
Tim-Philipp Müller
9da3ed6491 qtdemux: add qt_atom_parse_has_remaining() to avoid overflows with _get_remaining() 2009-09-24 16:28:40 +01:00
Tim-Philipp Müller
a16feec38e qtdemux: use GstByteReader when parsing tkhd atom 2009-09-23 16:54:43 +01:00
Tim-Philipp Müller
6b7f4f5e23 qtdemux: use unsigned ints for node length and do more sanity checking of the atom length 2009-09-23 16:54:43 +01:00
Tim-Philipp Müller
3abeb1e578 qtdemux: use GstByteReader for atom dumping and fix a few bugs 2009-09-23 16:54:42 +01:00
Tim-Philipp Müller
c8c9b0f35d qtdemux: move stco, stts, stss and stps atom parsing over to GstByteReader
Make sure we don't read beyond the atom boundary. Note that the code
behaves slightly differently in the corner case where there is not
enough atom data for the specified number of samples (n_samples_time)
in the atom, but still enough data to fill the pre-allocated index of
n_samples entries: before we would just stop parsing the stts data
and continue, whereas now we will likely error out. This should not
be a problem in practice though. We could maintain the old behaviour
by doing reads with a size check inside the loop if needed.
2009-09-23 16:54:42 +01:00
Tim-Philipp Müller
4be46b1586 qtdemux: use bytereader to parse stsz and stsc atoms
Use GstByteReader to parse stsz and stsc chunks, and check size of
available data before parsing it, instead of blindly assuming there
will be enough data. Fixes crashes with some fuzzed/broken files.
2009-09-23 16:54:42 +01:00
Tim-Philipp Müller
5875e2016a qtdemux: add qt_atom_parser_get_offset() and optimise _peek_sub() 2009-09-23 16:54:42 +01:00