Original commit message from CVS:
Patch by: Sebastian Dröge <slomo@circular-chaos.org>
* ext/wavpack/gstwavpackdec.c: (gst_wavpack_dec_reset),
(gst_wavpack_dec_init), (gst_wavpack_dec_change_state):
* ext/wavpack/gstwavpackenc.c: (gst_wavpack_enc_base_init),
(gst_wavpack_enc_class_init), (gst_wavpack_enc_reset),
(gst_wavpack_enc_init), (gst_wavpack_enc_set_wp_config),
(gst_wavpack_enc_change_state):
* ext/wavpack/gstwavpackparse.c:
Some small clean-ups: use enums instead of hard-coded numbers,
const-ify element details, re-factor some code into _reset()
functions (#352605).
Original commit message from CVS:
Patch by: Sebastian Dröge <slomo at circular-chaos.org>
* configure.ac:
* ext/wavpack/gstwavpackenc.c: (gst_wavpack_enc_mode_get_type),
(gst_wavpack_enc_correction_mode_get_type),
(gst_wavpack_enc_joint_stereo_mode_get_type),
(gst_wavpack_enc_init), (gst_wavpack_enc_set_wp_config):
Fix enum nicks; only emit no-more-pads once; add support for very
fast encoding mode in upcoming 4.40.0 release (#369539).
Original commit message from CVS:
* ext/dts/gstdtsdec.c: (gst_dtsdec_handle_frame):
Fix flow handling and buffer refcounting (gst_pad_push() takes
ownership of the buffer passed to it, the buffer does not have
to be unreffed no matter what flow value gst_pad_push() returns).
Original commit message from CVS:
* ext/wavpack/gstwavpackenc.c: (gst_wavpack_enc_set_wp_config):
* ext/wavpack/gstwavpackparse.c:
(gst_wavpack_parse_create_src_pad):
* gst/nuvdemux/gstnuvdemux.c: (gst_nuv_demux_create_pads):
* tests/check/elements/wavpackparse.c: (wavpackparse_found_pad):
Activate pads before adding them to running element.
Original commit message from CVS:
* ext/faad/gstfaad.c: (gst_faad_setcaps), (gst_faad_chain),
(gst_faad_close_decoder):
Some cleanups.
Added some more debugging.
Don't ever ignore unlinked, we're not a demuxer.
* gst/qtdemux/qtdemux.c: (gst_qtdemux_add_stream):
Activate pad before adding it to the element.
Original commit message from CVS:
* ext/theora/theoradec.c: (gst_theoradec_reset),
(theora_get_query_types), (theora_dec_src_query),
(theora_dec_src_event), (theora_dec_sink_event),
(theora_handle_comment_packet), (theora_handle_type_packet),
(theora_handle_header_packet), (clip_buffer), (theora_dec_push),
(theora_handle_422_image), (theora_handle_420_image),
(theora_handle_data_packet), (theora_dec_chain),
(theora_dec_change_state):
* ext/theora/theoradec.h:
Port lots of changes from theoradec to theoraexpdec.
This catches this plugin up to theoradec. Note that duplicate frames
are broken in theoradec at the moment.
Original commit message from CVS:
* ext/xvid/gstxvid.c: (plugin_init):
Set rank of xviddec to NONE until someone fixes it (too many crasher
bug reports against totem, people should use gst-ffmpeg).
Original commit message from CVS:
* ext/cdaudio/gstcdaudio.c: (gst_cdaudio_class_init),
(gst_cdaudio_init), (gst_cdaudio_set_property),
(gst_cdaudio_get_property), (gst_cdaudio_change_state),
(gst_cdaudio_send_event), (gst_cdaudio_get_query_types),
(gst_cdaudio_query), (cdaudio_uri_set_uri):
Port to 0.10.
Original commit message from CVS:
* ext/directfb/dfbvideosink.c: (plugin_init):
Lower rank from SECONDARY to MARGINAL. Plugins in -bad that might
be autoplugged shouldn't trump plugins in -base, -good or -ugly
(in this case ximagesink).
* sys/glsink/glimagesink.c: (plugin_init):
Set rank to NONE to prevent it from being autoplugged until
errors are handled properly (see #357212).
Original commit message from CVS:
Reverted previous commit (2006-09-19 - Allow internal codes from last.fm). As dicussed on #gstreamer it should be done in separete element.
Original commit message from CVS:
* ext/faac/gstfaac.c: (gst_faac_configure_source_pad),
(gst_faac_chain):
Add decoder specific info on the caps.
Some cleanups here and there.
Original commit message from CVS:
* ext/gsm/gstgsmdec.c: (gst_gsmdec_init),
(gst_gsmdec_sink_setcaps), (gst_gsmdec_sink_event),
(gst_gsmdec_chain):
* ext/gsm/gstgsmdec.h:
Handle WAV49 variant (GSM in WAV).
Some small cleanups.
Original commit message from CVS:
Patch by: Andrew Andkjar <enki at goodship net>
* ext/sdl/sdlaudiosink.c: (gst_sdlaudio_sink_close):
* ext/sdl/sdlvideosink.c: (gst_sdlvideosink_supported),
(gst_sdlvideosink_deinitsdl):
Only de-init the subsystem we previously initialised. Avoids
borkage when both sdlvideosink and sdlaudiosink are used
at the same time and one is shut down.
Original commit message from CVS:
Patch by: Sebastian Dröge <slomo at circular-chaos.org>
* ext/wavpack/gstwavpackdec.c: (gst_wavpack_dec_post_tags),
(gst_wavpack_dec_chain):
Post audio codec and average bitrate tags on bus (#344472).
* ext/wavpack/gstwavpackparse.c: (gst_wavpack_parse_base_init),
(gst_wavpack_parse_src_query):
Forward queries in other formats (BYTE format in particular)
upstream; add Sebastian to authors.
Original commit message from CVS:
* ext/wavpack/gstwavpackenc.c: (gst_wavpack_enc_push_block):
Fix mem leak, send newsegment event on correction pad
as well (#352476).
* ext/wavpack/gstwavpackparse.c: (gst_wavpack_parse_base_init):
Restore original author (on Sebastian's request).
* tests/check/Makefile.am:
* tests/check/gst-plugins-bad.supp:
Add (so far empty) suppression file for -bad. Remove
wavpackenc test from VALGRIND_TO_FIX now that the leak
is fixed.
Original commit message from CVS:
* ext/wavpack/gstwavpackenc.c: (gst_wavpack_enc_init),
(gst_wavpack_enc_finalize), (gst_wavpack_enc_sink_set_caps),
(gst_wavpack_enc_set_wp_config), (gst_wavpack_enc_format_samples),
(gst_wavpack_enc_push_block), (gst_wavpack_enc_chain),
(gst_wavpack_enc_rewrite_first_block),
(gst_wavpack_enc_sink_event), (gst_wavpack_enc_change_state),
(gst_wavpack_enc_set_property), (gst_wavpack_enc_get_property):
* ext/wavpack/gstwavpackenc.h:
* ext/wavpack/gstwavpackparse.c: (gst_wavpack_parse_reset),
(gst_wavpack_parse_src_query), (gst_wavpack_parse_src_event),
(gst_wavpack_parse_init), (gst_wavpack_parse_get_upstream_length),
(gst_wavpack_parse_loop):
More clean-ups: use shorter variable names to make code easier to
read; prefix structures we define with 'Gst' to make it clearer
where they come from.
Original commit message from CVS:
* ext/wavpack/gstwavpackenc.c: (gst_wavpack_enc_init),
(gst_wavpack_enc_set_wp_config), (gst_wavpack_enc_push_block),
(gst_wavpack_enc_chain), (gst_wavpack_enc_rewrite_first_block),
(gst_wavpack_enc_sink_event):
Fix caps set on buffers and template caps (output is framed)
and make them match (#351663); use GST_WARNING_OBJECT instead of
GST_ELEMENT_WARNING; simplify push_block(); do some small
clean-ups here and there; fix memleak (#351663).
Original commit message from CVS:
Based on patch by: Sebastian Dröge <slomo at circular-chaos.org>
* ext/wavpack/gstwavpackparse.c: (gst_wavpack_parse_sink_event),
(gst_wavpack_parse_get_upstream_length),
(gst_wavpack_parse_find_marker), (gst_wavpack_parse_resync_loop),
(gst_wavpack_parse_loop), (gst_wavpack_parse_resync_adapter):
Fix resyncing in push mode not stopping re-syncing at embedded
zeroes; skip garbage between frames in pull mode as well if
necessary; use gst_pad_query_peer_duration(); push EOS and
NEWSEGMENT event in right direction (#351659).
Original commit message from CVS:
* ext/ladspa/gstladspa.c: (gst_ladspa_base_init):
Convert ' ' into '_'. Try to keep as many characters in the padtemplate
names as possible.
Original commit message from CVS:
* ext/ladspa/gstsignalprocessor.c: (gst_signal_processor_flush),
(gst_signal_processor_do_pushes):
A push() gives away our refcount so we should not use the buffer on the
pen anymore.
Original commit message from CVS:
Patch by: Sebastian Dröge <slomo at circular-chaos.org>
* ext/wavpack/gstwavpackenc.c: (gst_wavpack_enc_class_init):
* ext/wavpack/gstwavpackparse.c:
(gst_wavpack_parse_resync_adapter), (gst_wavpack_parse_chain):
In push mode, re-sync to next wavpack header if sync is lost
(#351557). Also use hyphens instead of underscores in
GObject property names.
Original commit message from CVS:
* ext/wavpack/gstwavpackparse.c: (gst_wavpack_parse_class_init),
(gst_wavpack_parse_reset), (gst_wavpack_parse_get_src_query_types),
(gst_wavpack_parse_src_query),
(gst_wavpack_parse_handle_seek_event),
(gst_wavpack_parse_sink_event), (gst_wavpack_parse_init),
(gst_wavpack_parse_create_src_pad),
(gst_wavpack_parse_push_buffer), (gst_wavpack_parse_loop),
(gst_wavpack_parse_chain), (gst_wavpack_parse_sink_activate),
(gst_wavpack_parse_sink_activate_pull):
* ext/wavpack/gstwavpackparse.h:
Patch by: Sebastian Dröge <slomo at circular-chaos.org>
Make wavpackparse also work in push-mode (not seekable yet though);
some small clean-ups along the way; add support for SEEKING query
and query types function. (#351495).
Original commit message from CVS:
Patch by: Michal Benes <michal.benes at itonis tv>
* ext/faac/gstfaac.c: (gst_faac_configure_source_pad):
Bitrate in the faac structure is per output channel,
not total bitrate (#350741).
Original commit message from CVS:
2006-08-04 Andy Wingo <wingo@pobox.com>
* ext/ladspa/gstsignalprocessor.h: Add infrastructure for storing
whether a processor can work in place or not, and for keeping
track of its state. Change the FlowReturn instance variable from
"state" to "flow_state", all callers changed.
* ext/ladspa/gstsignalprocessor.c (gst_signal_processor_setup)
(gst_signal_processor_start, gst_signal_processor_stop)
(gst_signal_processor_cleanup): New functions to manage the
processor's state.
(gst_signal_processor_setcaps): start() as well as setup() here.
(gst_signal_processor_prepare): Respect CAN_PROCESS_IN_PLACE.
(gst_signal_processor_change_state): Stop and cleanup the
processor as we go to NULL.
* ext/ladspa/gstladspa.c (gst_ladspa_base_init): Reuse buffers if
INPLACE_BROKEN is not set.
* ext/ladspa/gstsignalprocessor.c (gst_signal_processor_prepare):
Do the alloc_buffer in bytes, not frames.
Original commit message from CVS:
2006-08-04 Andy Wingo <wingo@pobox.com>
* ext/ladspa/gstsignalprocessor.c (gst_signal_processor_setcaps)
(gst_signal_processor_prepare)
(gst_signal_processor_update_inputs)
(gst_signal_processor_process, gst_signal_processor_pen_buffer)
(gst_signal_processor_flush)
(gst_signal_processor_sink_activate_push)
(gst_signal_processor_src_activate_pull)
(gst_signal_processor_change_state): Remove the last of the code
that assumes that we process whole buffers at a time. Fix some
debugging. Seems to work now in some cases.
Original commit message from CVS:
2006-08-01 Andy Wingo <wingo@pobox.com>
* ext/ladspa/gstsignalprocessor.c (gst_signal_processor_process):
Fix nframes-choosing.
(gst_signal_processor_init): Init pending_in and pending_out.
Original commit message from CVS:
2006-08-01 Andy Wingo <wingo@pobox.com>
* ext/ladspa/gstsignalprocessor.c (gst_signal_processor_init): No
more default sample rate, although we never check that the sample
rate actually gets set. Something for the future.
(gst_signal_processor_setcaps): Some refcount fixes, flow fixes.
(gst_signal_processor_event): Refcount fixen.
(gst_signal_processor_process): Pull the number of frames to
process from the sizes of the buffers in the input pens.
(gst_signal_processor_pen_buffer): Remove an incorrect FIXME :)
(gst_signal_processor_do_pulls): Add an nframes argument, and use
it instead of buffer_frames.
(gst_signal_processor_getrange): Refcount fixen, pass nframes on
to do_pulls.
(gst_signal_processor_chain)
(gst_signal_processor_sink_activate_push)
(gst_signal_processor_src_activate_pull): Refcount fixen.
* ext/ladspa/gstsignalprocessor.h: No more buffer_frames, yay.
Original commit message from CVS:
* ext/ladspa/gstsignalprocessor.c: (gst_signal_processor_setcaps),
(gst_signal_processor_process):
don't query buffer-frames from caps, add lots of debug-log,
try fix for assert (#349189)
Original commit message from CVS:
2006-07-31 Julien MOUTTE <julien@moutte.net>
* ext/directfb/dfbvideosink.c: (gst_dfbvideosink_change_state),
(gst_dfbvideosink_buffer_alloc): Post an error message.
Original commit message from CVS:
2006-07-31 Julien MOUTTE <julien@moutte.net>
* ext/directfb/dfbvideosink.c: (gst_dfbvideosink_change_state),
(gst_dfbvideosink_buffer_alloc): Don't try allocating if we are
not
setup yet. Fail changing state if setup fails.
Original commit message from CVS:
* ext/xvid/gstxviddec.c: (gst_xviddec_init), (gst_xviddec_reset),
(gst_xviddec_unset), (gst_xviddec_handle_sink_event),
(gst_xviddec_setup), (gst_xviddec_negotiate), (gst_xviddec_chain),
(gst_xviddec_flush_buffers), (gst_xviddec_src_getcaps),
(gst_xviddec_setcaps), (gst_xviddec_change_state):
* ext/xvid/gstxviddec.h:
Clean-ups and code reflows. Pass return value from
gst_pad_alloc_buffer() upstream among other things. Also check
for NULL GValue before using GST_VALUE_TYPE macro (#348976).
Mass rename of xviddec -> dec variable for better
code readability.
