Original commit message from CVS:
* gst/playback/gsturidecodebin.c: (no_more_pads_full),
(new_decoded_pad), (remove_pads), (make_decoder), (setup_source),
(gst_uri_decode_bin_change_state):
Make sure we name srcpads uniquely even when using different internal
decodebins.
Signal no-more-pads when no more dynamic elements exist.
Remove pads on cleanup.
Original commit message from CVS:
* gst/playback/gstdecodebin2.c: (gst_decode_bin_factory_filter),
(analyze_new_pad), (connect_pad), (expose_pad), (caps_notify_cb),
(caps_notify_group_cb), (gst_decode_group_new),
(gst_decode_group_free):
Add support for delayed caps fixation when autoplugging.
Optimize cases where a multiqueue is not needed/wanted, like right after
anything that is not a demuxer.
Original commit message from CVS:
* gst/playback/gstplaybasebin.c: (queue_overrun),
(no_more_pads_full):
Stop buffering when the group is commited because the queues filled up.
Fixes#442024.
Original commit message from CVS:
* gst/playback/gstplaybasebin.c: (new_decoded_pad_full):
Handle unknown or invalid pads without crashing, as might occur if
a media file like an mp3 is specified as a subtitle file.
Fixes: #410039
Original commit message from CVS:
* gst/playback/gstplaybin.c: (add_sink), (dummy_blocked_cb),
(setup_sinks):
Block the subtitle bin output queue before ghosting it and linking,
then unblock after. This avoids spurious not-linked errors caused
by the queue starting up (because it gets linked when it is ghosted).
Fixes: #350299
Original commit message from CVS:
* ext/cdparanoia/gstcdparanoiasrc.c:
(gst_cd_paranoia_src_read_sector):
* gst-libs/gst/audio/gstbaseaudiosrc.c:
(gst_base_audio_src_create):
Small cleanups.
* ext/theora/theoradec.c: (theora_dec_sink_event):
Fix typo.
* gst-libs/gst/rtp/gstbasertpdepayload.c:
(gst_base_rtp_depayload_set_gst_timestamp):
Add some FIXME
* gst/playback/gstdecodebin.c: (queue_underrun_cb):
And some debug info when a FIXME path is hit.
Original commit message from CVS:
* gst/playback/gstdecodebin2.c: (gst_decode_bin_factory_filter):
Make decodebin2 autoplug depayloaders too.
* gst/playback/gsturidecodebin.c: (source_new_pad):
Set the newly created decoder in a usable state when autoplugging a
dynamic source such as RTSP.
Original commit message from CVS:
* gst/playback/gststreaminfo.c: (cb_probe):
Ignore video-codec tag for audio streams and ignore audio-codec tags
for video streams. Should make codec name collection a bit more
robust against sloppy demuxers that send tag events containing both
tags down each pad.
Original commit message from CVS:
* gst/playback/gstqueue2.c: (update_rates):
Tweak the buffering thresholds a little.
Update the buffer size with the previously calculate rate instead of
only when we calculate a new rate so that we get smoother buffering
updates.
* gst/playback/Makefile.am:
* gst/playback/gsturidecodebin.c: (gst_uri_decode_bin_base_init),
(gst_uri_decode_bin_class_init), (gst_uri_decode_bin_init),
(gst_uri_decode_bin_finalize), (gst_uri_decode_bin_set_property),
(gst_uri_decode_bin_get_property), (unknown_type),
(add_element_stream), (no_more_pads_full), (no_more_pads),
(source_no_more_pads), (new_decoded_pad), (array_has_value),
(gen_source_element), (has_all_raw_caps), (analyse_source),
(remove_decoders), (make_decoder), (remove_source),
(source_new_pad), (setup_source), (decoder_query_init),
(decoder_query_duration_fold), (decoder_query_duration_done),
(decoder_query_position_fold), (decoder_query_position_done),
(decoder_query_latency_fold), (decoder_query_latency_done),
(decoder_query_seeking_fold), (decoder_query_seeking_done),
(decoder_query_generic_fold), (gst_uri_decode_bin_query),
(gst_uri_decode_bin_change_state), (plugin_init):
New element that intergrates a source, optional buffering element and
decodebin.
Original commit message from CVS:
* gst/playback/Makefile.am:
* gst/playback/gstqueue2.c: (gst_queue_get_type),
(gst_queue_class_init), (gst_queue_init), (gst_queue_finalize),
(gst_queue_getcaps), (gst_queue_bufferalloc),
(gst_queue_acceptcaps), (update_time_level), (apply_segment),
(apply_buffer), (update_buffering), (reset_rate_timer),
(update_rates), (gst_queue_locked_flush),
(gst_queue_locked_enqueue), (gst_queue_locked_dequeue),
(gst_queue_handle_sink_event), (gst_queue_is_empty),
(gst_queue_is_filled), (gst_queue_chain), (gst_queue_push_one),
(gst_queue_loop), (gst_queue_handle_src_event),
(gst_queue_handle_src_query), (gst_queue_sink_activate_push),
(gst_queue_src_activate_push), (gst_queue_change_state),
(gst_queue_set_property), (gst_queue_get_property), (plugin_init):
On our way to playbin2 this is the new network queue that does buffering
all by itself using high and low watermarks. It can also measure up and
downstream bandwidth to optimally size the queue.
Original commit message from CVS:
* gst/playback/gstplaybasebin.c: (fill_buffer), (check_queue),
(queue_out_of_data):
Connect to the new queue "pushing" signal instead of the broken
"running" one.
Original commit message from CVS:
* gst/playback/gstdecodebin.c: (type_found), (plugin_init):
* gst/playback/gstdecodebin2.c: (plugin_init):
Better error message for text files.
Original commit message from CVS:
* gst/playback/gstplaybin.c: (add_sink),
(gst_play_bin_change_state):
Activate sync in playbin, we are ready to handle it for live streams.
Original commit message from CVS:
Patch by: Tommi Myöhänen <ext-tommi dot myohanen at nokia dot com>
* gst/playback/gstplaybasebin.c: (add_stream):
Fix leak in add_stream(), when g_value_set_object() increases the
refcount of streaminfo object. Fixes#426250.
Original commit message from CVS:
Patch by: Tommi Myöhänen <ext-tommi dot myohanen at nokia dot com>
* gst/playback/gstdecodebin2.c: (connect_pad), (expose_pad),
(deactivate_free_recursive):
Decodebin2 doesn't unref pads it obtains in some occasions:
- multiqueue src pads, when either connecting further or exposing
- sink pads of new autoplugged elements
- peer pads when recursively freeing elements
Fixes#425455.
Original commit message from CVS:
* gst/playback/gstplaybin.c: (gst_play_bin_class_init):
Remove playbin's override of the set_clock vmethod. It's irrelevant
after Wim's commit on the 19th.
Original commit message from CVS:
* gst/playback/gstdecodebin.c: (remove_fakesink):
Don't post STATE_DIRTY anymore.
* gst/playback/gstplaybin.c: (add_sink), (gst_play_bin_send_event),
(gst_play_bin_change_state):
Remove stream_time reset in seek handling, core does that now.
Disable clocking for live pipelines by forcing a NULL clock to the
complete pipeline, core is too smart now for our previous hack.
We can always autoplug in PAUSED now.
Original commit message from CVS:
* docs/plugins/Makefile.am:
* docs/plugins/gst-plugins-base-plugins-docs.sgml:
* docs/plugins/gst-plugins-base-plugins-sections.txt:
* docs/plugins/inspect/plugin-decodebin2.xml:
* gst/playback/gstdecodebin2.c: (gst_decode_bin_class_init):
Add documentation for decodebin2 that indicates that the API
is still unstable.
Original commit message from CVS:
Patch by: Ed Catmur <ed at catmur dot co dot uk>
* gst/playback/gstplaybin.c: (gst_play_bin_vis_unblocked),
(gst_play_bin_vis_blocked), (gst_play_bin_set_property):
Fix race condition when rapidly switching visualisations in playbin.
Fixes#401029.
Original commit message from CVS:
* gst/playback/gstdecodebin2.c: (gst_decode_bin_dispose),
(multi_queue_underrun_cb), (gst_decode_group_check_if_drained),
(sort_end_pads), (gst_decode_group_expose),
(gst_decode_group_hide):
Don't free groups from the streaming threads. Just put them aside and
free them in dispose.
Original commit message from CVS:
* gst/playback/gstdecodebin2.c: (connect_element),
(pad_added_group_cb), (gst_decode_group_check_if_blocked),
(sort_end_pads), (gst_decode_group_expose):
Handle dynamic pads within groups.
Sort pads before exposing them in order to make playbin happy.
There still is a race with the multiqueue filling up. This should be
solved separately.
Fixes#398721
Original commit message from CVS:
* gst/playback/gstplaybasebin.c: (setup_source):
When we have external subtitles and wait for the subtitle decodebin
to get up and running, we set up a (sync) bus handler for the
subtitle decodebin, so we can stop waiting when it posts an error
message. However, we should do that before we set the subtitle
decodebin's state to playing, otherwise things are racy and we might
miss error messages posted before we had a chance to set up the bus.
This should finally fix totem hanging on .txt pseudo-subtitle files.
Original commit message from CVS:
* gst/playback/gstdecodebin.c: (add_fakesink),
(gst_decode_bin_change_state):
* gst/playback/gstdecodebin2.c: (add_fakesink),
(gst_decode_bin_change_state):
Don't error out if there is no fakesink in the READY to NULL state
change, since when decodebin is re-used, we're only adding the
fakesink element in READY to PAUSED.
* tests/check/elements/decodebin.c:
(new_decoded_pad_plug_fakesink_cb), (GST_START_TEST),
(decodebin_suite):
Minimal unit test to make sure we can use the same decodebin
instance twice (at least with audiotestsrc input).
Original commit message from CVS:
* gst/playback/gstplaybin.c: (gen_vis_element):
Add audioresample+audioconvert in front of the visualisation
element, so that elements like libvisual 0.4 that don't support all
samplerates can work.
Fixes: #402505
Original commit message from CVS:
* gst/playback/gstplaybasebin.c: (gst_play_base_bin_get_property),
(gst_play_base_bin_get_streaminfo_value_array):
Take some locks and make a copy of the streaminfo value array we
maintain while holding the lock, so that the application can
retrieve the stream-info as a value array in a thread-safe way.
Original commit message from CVS:
* gst/playback/gstdecodebin2.c: (gst_decode_bin_dispose):
Cast lock macro parameters to make sure we're actually accessing the
lock member at the right class level. Free list itself in _dispose()
as well and NULL it in case dispose gets called multiple times.
Original commit message from CVS:
* gst/playback/gstdecodebin2.c:
(gst_decode_bin_dispose),(gst_decode_bin_finalize):
Free GstDecodeGroups no longer used.
(gst_decode_group_expose):
Don't unlock too many times !
(deactivate_free_recursive):
Free iterator once we're done with it.
Fix for recursively deactivating elements (stop at ghostpads).
Original commit message from CVS:
* gst/playback/gstplaybin.c: (handoff):
Fix up caps on the frame buffer before we save it and potentially
make it accessible to other threads via g_object_get; also use
gst_buffer_replace() instead of gst_mini_object_replace().
Original commit message from CVS:
* gst/playback/gstdecodebin2.c: (gst_decode_bin_finalize),
(gst_decode_group_new), (gst_decode_group_free):
Set queues to bigger sizes to cope with HD contents.
Fix some mutex freeing and add comment about MT safe methods.
Original commit message from CVS:
* gst/playback/gstdecodebin2.c: (gst_decode_bin_finalize):
Don't leak mutex.
* tests/check/elements/playbin.c:
(test_sink_usage_video_only_stream),
(test_suburi_error_unknowntype), (test_suburi_error_invalidfile),
(test_suburi_error_wrongproto), (test_missing_urisource_handler),
(test_missing_suburisource_handler),
(test_missing_primary_decoder), (playbin_suite):
Run all tests once with decodebin and once with decodebin2.
One test does not pass yet with decodebin2.
Original commit message from CVS:
* gst/playback/gstdecodebin2.c: (gst_decode_group_new),
(get_current_group), (group_demuxer_event_probe),
(gst_decode_group_expose), (deactivate_free_recursive),
(gst_decode_group_free):
Cleanups.
Don't forget to emit 'no-more-pads' once a group is exposed.
Cleanup elements from a DecodeGroup once we remove it.
Protect call to gst_decode_group_expose() with the decodebin lock.
Original commit message from CVS:
* gst/playback/gstplaybasebin.c: (setup_subtitle),
(gen_source_element), (gst_play_base_bin_change_state):
Attempt at a better error message in case we don't have the required
URI handler installed; post missing-plugin message also when we're
missing an URI handler for the subtitle URI; clean up properly also
when an error occurs and we never made it to PAUSED state.
* tests/check/elements/playbin.c: (GST_START_TEST),
(playbin_suite):
Check that we're also getting a missing-plugin messsage for a
missing subtitle URI handler (and clean up properly).
Original commit message from CVS:
* gst/playback/Makefile.am:
* gst/playback/gstdecodebin.c: (close_pad_link):
* gst/playback/gstdecodebin2.c: (analyze_new_pad):
* gst/playback/gstplaybasebin.c: (gst_play_base_bin_class_init),
(gst_play_base_bin_handle_message_func), (unknown_type):
Let decodebin be the element to post missing-plugin messages for
missing decoders (rather than playbin); make playbin implement
GstBin::handle_message so we can suppress missing-plugin messages
for types we're not handling on purpose (don't want to bring up an
installer in those cases).
Original commit message from CVS:
* gst/playback/gstplaybin.c: (post_missing_element_message),
(gen_video_element), (gen_text_element), (gen_audio_element),
(gen_vis_element):
Post missing-plugin messages also when we error out because
converters, textoverlay or auto*sinks are missing (#161922).
Original commit message from CVS:
* gst/playback/gstdecodebin.c: (dynamic_add), (close_pad_link),
(is_demuxer_element), (new_caps):
* gst/playback/gstplaybasebin.c: (source_new_pad):
Fix the case where we try to ref a NULL element when we delay a link
because of unfixed caps.
Set the state of autoplugged decodebins to PAUSED.
RTSP now works in playbin, we can remove it from the blacklist.
Original commit message from CVS:
* gst/playback/Makefile.am:
* gst/playback/gstplaybasebin.c: (string_arr_has_str),
(unknown_type), (setup_subtitle), (gen_source_element):
* gst/playback/gstplaybin.c: (plugin_init):
Post missing-plugin messages on the bus for missing sources and
missing decoders/demuxers/depayloaders; fix error code used when
we're missing an URI handler source; for media types that we are not
handling on purpose at the moment, don't print "don't know how to
handle xyz" messages to the terminal or post missing-plugin
messages on the bus.
* tests/check/elements/playbin.c: (create_playbin),
(GST_START_TEST), (gst_codec_src_uri_get_type),
(gst_codec_src_uri_get_protocols), (gst_codec_src_uri_get_uri),
(gst_codec_src_uri_set_uri), (gst_codec_src_uri_handler_init),
(gst_codec_src_init_type), (gst_codec_src_base_init),
(gst_codec_src_create), (gst_codec_src_class_init),
(gst_codec_src_init), (plugin_init), (playbin_suite):
Add some tests for the missing-plugin stuff.
Original commit message from CVS:
* ext/ogg/gstoggdemux.c: (gst_ogg_pad_stream_out):
* ext/vorbis/vorbisdec.c: (vorbis_handle_data_packet):
* gst/playback/gstdecodebin2.c:
(gst_decode_group_check_if_blocked):
Printf format and missing argument fixes.
Original commit message from CVS:
* gst/playback/gstdecodebin.c: (type_found):
Special-case the text/plain media type: we only want to recognise it
as a 'raw' decoded media type if it comes from a demuxer or subtitle
parser, but not if the entire stream is of text/plain type. If the
entire stream is text/plain, we should just error out.
This fixes playback of audio files with lyrics in totem. Totem can't
distinguish between text files and subtitle files and passes any
.txt file with the same basename as the main file to playbin as
suburi, and playbin will then throw a 'subtitle found, but no video
stream' error, which isn't entirely helpful. See #380342.
Also, with this change we'll show a slightly more correct error
message in case totem passes a playlist file to us (although a
custom error message wording instead of the default text would
probably not be a bad idea either).
Same problem also needs to be fixed for playbin+decodebin2.
* tests/check/Makefile.am:
* tests/check/elements/decodebin.c: (src_handoff_cb),
(decodebin_new_decoded_pad_cb), (GST_START_TEST),
(decodebin_suite):
Add simple unit test for decodebin for the above.
Original commit message from CVS:
* gst/playback/gstdecodebin.c: (gst_decode_bin_change_state):
* gst/playback/gstdecodebin2.c: (gst_decode_bin_change_state):
Refuse to change state to READY when we failed to create any of the
required elements in our instance init function.
Original commit message from CVS:
* gst/playback/gstdecodebin.c: (find_dynamic), (dynamic_add),
(close_pad_link), (elem_is_dynamic), (unlinked), (close_link):
Handle the case where an element has multiple pads with
unfixed caps as well as still possibly producing more dynamic
pads by storing each case as a distinct entry in the dynamic list.
Fixes#38223 again.
