Original commit message from CVS:
* ext/wavpack/gstwavpackenc.c: (gst_wavpack_enc_init),
(gst_wavpack_enc_finalize), (gst_wavpack_enc_sink_set_caps),
(gst_wavpack_enc_set_wp_config), (gst_wavpack_enc_format_samples),
(gst_wavpack_enc_push_block), (gst_wavpack_enc_chain),
(gst_wavpack_enc_rewrite_first_block),
(gst_wavpack_enc_sink_event), (gst_wavpack_enc_change_state),
(gst_wavpack_enc_set_property), (gst_wavpack_enc_get_property):
* ext/wavpack/gstwavpackenc.h:
* ext/wavpack/gstwavpackparse.c: (gst_wavpack_parse_reset),
(gst_wavpack_parse_src_query), (gst_wavpack_parse_src_event),
(gst_wavpack_parse_init), (gst_wavpack_parse_get_upstream_length),
(gst_wavpack_parse_loop):
More clean-ups: use shorter variable names to make code easier to
read; prefix structures we define with 'Gst' to make it clearer
where they come from.
Original commit message from CVS:
* ext/wavpack/gstwavpackenc.c: (gst_wavpack_enc_init),
(gst_wavpack_enc_set_wp_config), (gst_wavpack_enc_push_block),
(gst_wavpack_enc_chain), (gst_wavpack_enc_rewrite_first_block),
(gst_wavpack_enc_sink_event):
Fix caps set on buffers and template caps (output is framed)
and make them match (#351663); use GST_WARNING_OBJECT instead of
GST_ELEMENT_WARNING; simplify push_block(); do some small
clean-ups here and there; fix memleak (#351663).
Original commit message from CVS:
Based on patch by: Sebastian Dröge <slomo at circular-chaos.org>
* ext/wavpack/gstwavpackparse.c: (gst_wavpack_parse_sink_event),
(gst_wavpack_parse_get_upstream_length),
(gst_wavpack_parse_find_marker), (gst_wavpack_parse_resync_loop),
(gst_wavpack_parse_loop), (gst_wavpack_parse_resync_adapter):
Fix resyncing in push mode not stopping re-syncing at embedded
zeroes; skip garbage between frames in pull mode as well if
necessary; use gst_pad_query_peer_duration(); push EOS and
NEWSEGMENT event in right direction (#351659).
Original commit message from CVS:
* ext/ladspa/gstladspa.c: (gst_ladspa_base_init):
Convert ' ' into '_'. Try to keep as many characters in the padtemplate
names as possible.
Original commit message from CVS:
* ext/ladspa/gstsignalprocessor.c: (gst_signal_processor_flush),
(gst_signal_processor_do_pushes):
A push() gives away our refcount so we should not use the buffer on the
pen anymore.
Original commit message from CVS:
Patch by: Sebastian Dröge <slomo at circular-chaos.org>
* ext/wavpack/gstwavpackenc.c: (gst_wavpack_enc_class_init):
* ext/wavpack/gstwavpackparse.c:
(gst_wavpack_parse_resync_adapter), (gst_wavpack_parse_chain):
In push mode, re-sync to next wavpack header if sync is lost
(#351557). Also use hyphens instead of underscores in
GObject property names.
Original commit message from CVS:
* ext/wavpack/gstwavpackparse.c: (gst_wavpack_parse_class_init),
(gst_wavpack_parse_reset), (gst_wavpack_parse_get_src_query_types),
(gst_wavpack_parse_src_query),
(gst_wavpack_parse_handle_seek_event),
(gst_wavpack_parse_sink_event), (gst_wavpack_parse_init),
(gst_wavpack_parse_create_src_pad),
(gst_wavpack_parse_push_buffer), (gst_wavpack_parse_loop),
(gst_wavpack_parse_chain), (gst_wavpack_parse_sink_activate),
(gst_wavpack_parse_sink_activate_pull):
* ext/wavpack/gstwavpackparse.h:
Patch by: Sebastian Dröge <slomo at circular-chaos.org>
Make wavpackparse also work in push-mode (not seekable yet though);
some small clean-ups along the way; add support for SEEKING query
and query types function. (#351495).
Original commit message from CVS:
Patch by: Michal Benes <michal.benes at itonis tv>
* ext/faac/gstfaac.c: (gst_faac_configure_source_pad):
Bitrate in the faac structure is per output channel,
not total bitrate (#350741).
Original commit message from CVS:
2006-08-04 Andy Wingo <wingo@pobox.com>
* ext/ladspa/gstsignalprocessor.h: Add infrastructure for storing
whether a processor can work in place or not, and for keeping
track of its state. Change the FlowReturn instance variable from
"state" to "flow_state", all callers changed.
* ext/ladspa/gstsignalprocessor.c (gst_signal_processor_setup)
(gst_signal_processor_start, gst_signal_processor_stop)
(gst_signal_processor_cleanup): New functions to manage the
processor's state.
(gst_signal_processor_setcaps): start() as well as setup() here.
(gst_signal_processor_prepare): Respect CAN_PROCESS_IN_PLACE.
(gst_signal_processor_change_state): Stop and cleanup the
processor as we go to NULL.
* ext/ladspa/gstladspa.c (gst_ladspa_base_init): Reuse buffers if
INPLACE_BROKEN is not set.
* ext/ladspa/gstsignalprocessor.c (gst_signal_processor_prepare):
Do the alloc_buffer in bytes, not frames.
Original commit message from CVS:
2006-08-04 Andy Wingo <wingo@pobox.com>
* ext/ladspa/gstsignalprocessor.c (gst_signal_processor_setcaps)
(gst_signal_processor_prepare)
(gst_signal_processor_update_inputs)
(gst_signal_processor_process, gst_signal_processor_pen_buffer)
(gst_signal_processor_flush)
(gst_signal_processor_sink_activate_push)
(gst_signal_processor_src_activate_pull)
(gst_signal_processor_change_state): Remove the last of the code
that assumes that we process whole buffers at a time. Fix some
debugging. Seems to work now in some cases.
Original commit message from CVS:
2006-08-01 Andy Wingo <wingo@pobox.com>
* ext/ladspa/gstsignalprocessor.c (gst_signal_processor_process):
Fix nframes-choosing.
(gst_signal_processor_init): Init pending_in and pending_out.
Original commit message from CVS:
2006-08-01 Andy Wingo <wingo@pobox.com>
* ext/ladspa/gstsignalprocessor.c (gst_signal_processor_init): No
more default sample rate, although we never check that the sample
rate actually gets set. Something for the future.
(gst_signal_processor_setcaps): Some refcount fixes, flow fixes.
(gst_signal_processor_event): Refcount fixen.
(gst_signal_processor_process): Pull the number of frames to
process from the sizes of the buffers in the input pens.
(gst_signal_processor_pen_buffer): Remove an incorrect FIXME :)
(gst_signal_processor_do_pulls): Add an nframes argument, and use
it instead of buffer_frames.
(gst_signal_processor_getrange): Refcount fixen, pass nframes on
to do_pulls.
(gst_signal_processor_chain)
(gst_signal_processor_sink_activate_push)
(gst_signal_processor_src_activate_pull): Refcount fixen.
* ext/ladspa/gstsignalprocessor.h: No more buffer_frames, yay.
Original commit message from CVS:
* ext/ladspa/gstsignalprocessor.c: (gst_signal_processor_setcaps),
(gst_signal_processor_process):
don't query buffer-frames from caps, add lots of debug-log,
try fix for assert (#349189)
Original commit message from CVS:
2006-07-31 Julien MOUTTE <julien@moutte.net>
* ext/directfb/dfbvideosink.c: (gst_dfbvideosink_change_state),
(gst_dfbvideosink_buffer_alloc): Post an error message.
Original commit message from CVS:
2006-07-31 Julien MOUTTE <julien@moutte.net>
* ext/directfb/dfbvideosink.c: (gst_dfbvideosink_change_state),
(gst_dfbvideosink_buffer_alloc): Don't try allocating if we are
not
setup yet. Fail changing state if setup fails.
Original commit message from CVS:
* ext/xvid/gstxviddec.c: (gst_xviddec_init), (gst_xviddec_reset),
(gst_xviddec_unset), (gst_xviddec_handle_sink_event),
(gst_xviddec_setup), (gst_xviddec_negotiate), (gst_xviddec_chain),
(gst_xviddec_flush_buffers), (gst_xviddec_src_getcaps),
(gst_xviddec_setcaps), (gst_xviddec_change_state):
* ext/xvid/gstxviddec.h:
Clean-ups and code reflows. Pass return value from
gst_pad_alloc_buffer() upstream among other things. Also check
for NULL GValue before using GST_VALUE_TYPE macro (#348976).
Mass rename of xviddec -> dec variable for better
code readability.
Original commit message from CVS:
* ext/wavpack/gstwavpackdec.c: (gst_wavpack_dec_chain):
Fix caps after previous change to byte order endianness.
* ext/wavpack/gstwavpackparse.c: (gst_wavpack_parse_reset),
(gst_wavpack_parse_sink_event), (gst_wavpack_parse_init),
(gst_wavpack_parse_loop):
* ext/wavpack/gstwavpackparse.h:
Queue incoming events if there's no source pad yet and
send them downstream later when the pad is there.
Original commit message from CVS:
* ext/wavpack/gstwavpackdec.c: (gst_wavpack_dec_init),
(gst_wavpack_dec_format_samples),
(gst_wavpack_dec_clip_outgoing_buffer), (gst_wavpack_dec_chain),
(gst_wavpack_dec_change_state):
* ext/wavpack/gstwavpackdec.h:
Output audio in native byte order (which is also how we get
samples from wavpack); output samples with 21-24 bit depth
with 32 bit width (makes things easier for us).
Original commit message from CVS:
* ext/wavpack/gstwavpackdec.c: (gst_wavpack_dec_base_init),
(gst_wavpack_dec_class_init), (gst_wavpack_dec_init),
(gst_wavpack_dec_finalize), (gst_wavpack_dec_format_samples),
(gst_wavpack_dec_clip_outgoing_buffer), (gst_wavpack_dec_chain),
(gst_wavpack_dec_sink_event), (gst_wavpack_dec_change_state):
* ext/wavpack/gstwavpackdec.h:
More clean-ups: remove most of the disfunctional correction
pad stuff for now, if it ever gets implemented a lot of stuff
will have to be rewritten anyway; redo chain function, move
errors to end, error out instead of g_assert()ing. Also rename
overly long variable 'wavpackdec' to just 'dec'; miscellaneous
other small stuff.
Original commit message from CVS:
Patch by: Sebastian Dröge <slomo at circular-chaos.org>
* configure.ac:
Check for wavpack version and define WAVPACK_OLD_API if
necessary.
* ext/wavpack/Makefile.am:
* ext/wavpack/gstwavpackcommon.c: (gst_wavpack_read_header),
(gst_wavpack_read_metadata):
* ext/wavpack/gstwavpackcommon.h:
* ext/wavpack/gstwavpackdec.c: (gst_wavpack_dec_base_init),
(gst_wavpack_dec_class_init), (gst_wavpack_dec_init),
(gst_wavpack_dec_finalize), (gst_wavpack_dec_format_samples),
(gst_wavpack_dec_clip_outgoing_buffer), (gst_wavpack_dec_chain),
(gst_wavpack_dec_sink_event), (gst_wavpack_dec_change_state),
(gst_wavpack_dec_request_new_pad), (gst_wavpack_dec_plugin_init):
* ext/wavpack/gstwavpackdec.h:
* ext/wavpack/gstwavpackenc.c: (gst_wavpack_enc_class_init),
(gst_wavpack_enc_init), (gst_wavpack_enc_finalize),
(gst_wavpack_enc_set_wp_config):
* ext/wavpack/gstwavpackparse.c: (gst_wavpack_parse_base_init),
(gst_wavpack_parse_finalize), (gst_wavpack_parse_class_init),
(gst_wavpack_parse_index_get_entry_from_sample),
(gst_wavpack_parse_scan_to_find_sample),
(gst_wavpack_parse_handle_seek_event),
(gst_wavpack_parse_create_src_pad):
* ext/wavpack/gstwavpackstreamreader.c:
* ext/wavpack/gstwavpackstreamreader.h:
Port to new/official wavpack API, don't use API that was exported
in wavpack header files and in the lib but meant to be private, at
least not for recent wavpack versions; misc. 'cleanups' (#347443).
Original commit message from CVS:
Patch by: Lutz Mueller <lutz at topfrose dot de>
* ext/neon/gstneonhttpsrc.c: (gst_neonhttp_src_class_init),
(gst_neonhttp_src_init), (gst_neonhttp_src_finalize),
(request_dispatch), (gst_neonhttp_src_create),
(gst_neonhttp_src_start), (gst_neonhttp_src_get_size),
(gst_neonhttp_src_stop), (set_proxy), (set_uri),
(gst_neonhttp_src_set_property), (gst_neonhttp_src_get_property),
(gst_neonhttp_src_uri_set_uri), (size_header_handler):
* ext/neon/gstneonhttpsrc.h:
Remove unlock function. start/stop will do everything needed
Removed code that was never called.
Use gst_pad_alloc_buffer. Don't send EOS - parent class does that for us.
Do not escape path. Fixes#346723.
Additional code cleanups.
Original commit message from CVS:
* configure.ac:
Fix check so that future libneon API changes won't break the build.
* ext/neon/gstneonhttpsrc.c:
Fix build with libneon-0.26.x (#345182).
Original commit message from CVS:
Patch by: Wouter Paesen <wouter at kangaroot net>
* ext/soundtouch/Makefile.am:
* ext/soundtouch/gstpitch.cc:
Make pitch element controllable via GstController interface
(#344821).
* configure.ac:
Up core requirements to 0.10.8.1/CVS because earlier
GstControllers can't handle float properties correctly.
Check for GstController CFLAGS and LIBS.
* tests/icles/Makefile.am:
* tests/icles/pitch-test.c: (main):
Add small test program for the above (welcome to the 80s!).
Original commit message from CVS:
Patch by: Sebastian Dröge <slomo at circular-chaos org>
* ext/wavpack/gstwavpackenc.c: (gst_wavpack_enc_base_init),
(gst_wavpack_enc_class_init), (gst_wavpack_enc_set_wp_config),
(gst_wavpack_enc_chain), (gst_wavpack_enc_sink_event),
(gst_wavpack_enc_set_property), (gst_wavpack_enc_get_property):
* ext/wavpack/gstwavpackenc.h:
Use bitrate property solely for bitrates and add new
bits-per-sample property for the other stuff. Set duration
to 'unknown' in initial header and resend header with proper
duration on EOS; update Sebastian's e-mail address.
Original commit message from CVS:
* ext/libmms/gstmms.c: (gst_mms_create):
Set caps on outgoing buffers.
* sys/directdraw/gstdirectdrawsink.c: (gst_directdrawsink_init):
Comment out unused global instance variable.
Original commit message from CVS:
* configure.ac:
Check for X before using X_CFLAGS in the check for opengl (#343866).
* ext/musepack/Makefile.am:
* ext/wavpack/Makefile.am:
* gst/speed/Makefile.am:
Add missing GST_LIBS, fixes build on cygwin (#343866).
Original commit message from CVS:
* ext/faad/gstfaad.c: (gst_faad_class_init), (gst_faad_init),
(gst_faad_dispose), (gst_faad_sink_event), (clip_outgoing_buffer),
(gst_faad_chain), (gst_faad_change_state):
Added GstSegment to control segments.
Added clipping/dropping of outgoing buffers in order to have accurate
seeking working properly.
Original commit message from CVS:
Patch by: Lutz Müller <lutz at topfrose de>
* ext/bz2/Makefile.am:
* ext/bz2/gstbz2dec.c: (gst_bz2dec_chain), (gst_bz2dec_init),
(gst_bz2dec_change_state), (gst_bz2dec_class_init):
Use gst_type_find_helper_* functions for typefinding; use
correct caps with gst_pad_alloc_buffer(); add state change
function and reset decoder in it; don't unref buffer if
pad_push fails; use fixed caps on source pad. (#341524).
