Fixes crash in audiotestsrc because of an unsupported format
getting negotiated on big-endian systems with
audiotestsrc ! interleave ! audioconvert ! wavenc
In order to have a full mapping between channel positions in the audio
stream and loudspeaker positions, the channel-mask alone is not enough:
the channels must be interleaved following some Default Channel Ordering
as mentioned in the WAVEFORMATEXTENSIBLE[1] specification.
As a Default Channel Ordering use the one implied by
GstAudioChannelPosition which follows the ordering defined in SMPTE
2036-2-2008[2].
NOTE that the relative order in the Top Layer is not exactly the same as
the one from the WAVEFORMATEXTENSIBLE[1] specification; let's hope users
using so may channels are already aware of such discrepancies.
[1] http://msdn.microsoft.com/en-us/library/windows/hardware/dn653308%28v=vs.85%29.aspx
[2] http://www.itu.int/dms_pub/itu-r/opb/rep/R-REP-BS.2159-2-2011-PDF-E.pdf
Fixes: https://bugzilla.gnome.org/show_bug.cgi?id=737127
The caps query handling function for the sinkpads was called for
the srcpad, and the sinkpads had none. This commit moves it to the
right pad, but nonetheless the negotiation still looks wrong.
This makes the test pass again after the recent coverity fix
and also allows interleave to work again, but someone should
really review the negotiation code and fix it.
Gather caps on all sink pads before setting the src pad caps. This is
specially needed when the audio channel mapping is set on the sink
pads and the element needs to preserve it on its src pad.
https://bugzilla.gnome.org/show_bug.cgi?id=690267
When all pads go to EOS immediately, we are not negotiated and our collected
function is called (without any available data). Handle this case gracefully.
Conflicts:
gst/interleave/interleave.c
Or perhaps it should just be a guint64 channel mask, which would
be nicer in C, but more awkward for bindings (even more so since
we can't add a flags type for it, since that only supports guint
size flags). Fixes wavenc unit test.
https://bugzilla.gnome.org/show_bug.cgi?id=669643
Original commit message from CVS:
* gst/interleave/deinterleave.c: (gst_deinterleave_add_new_pads),
(gst_deinterleave_src_query):
* gst/interleave/interleave.c: (gst_interleave_src_query_duration),
(gst_interleave_src_query):
Properly implement duration and position queries in bytes format. We
have to take the upstream reply and divide/multiply it by the number
of channels to get the correct result.
Original commit message from CVS:
* gst/interleave/interleave.c: (gst_interleave_pad_get_type),
(gst_interleave_pad_get_property), (gst_interleave_pad_class_init),
(gst_interleave_request_new_pad), (gst_interleave_release_pad):
* gst/interleave/interleave.h:
Use an always increasing integer for the number in the name of the
requested sink pads to guarantuee a unique name. Add a "channel"
property to GstInterleavePad to make it possible for applications
to retrieve the channel number in the output for every pad.
Use g_type_register_static_simple() instead of
g_type_register_static() to save some relocations.
Original commit message from CVS:
* gst/interleave/interleave.c: (gst_interleave_pad_get_type),
(gst_interleave_change_state):
Stop GstCollectPads before calling the parent's state change function
when going from PAUSED to READY as we otherwise deadlock.
Fixes bug #536258.
Original commit message from CVS:
* gst/interleave/interleave.c:
(gst_interleave_check_channel_positions),
(gst_interleave_set_channel_positions),
(gst_interleave_class_init):
Use new gst_audio_check_channel_positions() function and register
the GstInterleavePad type from a threadsafe context.
Original commit message from CVS:
* gst/interleave/interleave.c: (gst_interleave_pad_get_type),
(gst_interleave_finalize), (gst_audio_check_channel_positions),
(gst_interleave_set_channel_positions),
(gst_interleave_class_init), (gst_interleave_init),
(gst_interleave_set_property), (gst_interleave_get_property),
(gst_interleave_request_new_pad), (gst_interleave_release_pad),
(gst_interleave_sink_setcaps), (gst_interleave_src_query_duration),
(gst_interleave_src_query_latency), (gst_interleave_collected):
* gst/interleave/interleave.h:
Allow setting channel positions via a property and allow using the
channel positions on the input as the channel positions of the output.
Fix some broken logic and memory leaks.
* tests/check/Makefile.am:
* tests/check/elements/interleave.c: (src_handoff_float32),
(sink_handoff_float32), (GST_START_TEST), (interleave_suite):
Add unit tests for checking correct handling of channel positions.
Original commit message from CVS:
* gst/interleave/deinterleave.c:
Add another example launch line.
* gst/interleave/interleave.c: (interleave_24),
(gst_interleave_finalize), (gst_interleave_base_init),
(gst_interleave_class_init), (gst_interleave_init),
(gst_interleave_request_new_pad), (gst_interleave_release_pad),
(gst_interleave_change_state), (__remove_channels),
(__set_channels), (gst_interleave_sink_getcaps),
(gst_interleave_set_process_function),
(gst_interleave_sink_setcaps), (gst_interleave_sink_event),
(gst_interleave_src_query_duration), (gst_interleave_src_query),
(forward_event_func), (forward_event), (gst_interleave_src_event),
(gst_interleave_collected):
* gst/interleave/interleave.h:
Major rewrite of interleave using GstCollectpads. This new version
also supports almost all raw audio formats and has better caps
negotiation. Fixes bug #506594.
Also update docs and add some more examples.
* tests/check/elements/interleave.c: (interleave_chain_func),
(GST_START_TEST), (src_handoff_float32), (sink_handoff_float32),
(interleave_suite):
Add some more extensive unit tests for interleave.
Original commit message from CVS:
* gst/interleave/Makefile.am:
* gst/interleave/deinterleave.h:
* gst/interleave/interleave.h:
* gst/interleave/plugin.h:
Split definitions into separate header files for better documentation
generation.
* gst/interleave/deinterleave.c: (gst_deinterleave_base_init),
(gst_deinterleave_class_init), (gst_deinterleave_sink_setcaps),
(gst_deinterleave_process):
Don't use alloca, allow caps changes as long as the number of channels
does not change, don't use g_warning, return NOT_NEGOTIATED as early
as possible and some other cleanup.
* gst/interleave/interleave.c: (gst_interleave_base_init),
(gst_interleave_class_init):
Do some random cleanup.
* tests/check/Makefile.am:
* tests/check/elements/deinterleave.c: (GST_START_TEST),
(deinterleave_chain_func), (deinterleave_pad_added),
(deinterleave_suite):
Add unit tests for the deinterleave element.
Original commit message from CVS:
* gst/freeze/FAQ:
* gst/freeze/Makefile.am:
* gst/freeze/gstfreeze.c:
Add example to source code documentation blob and remove the 3 line
FAQ.
* gst/interleave/interleave.c:
Add a source code documentation blob.
Original commit message from CVS:
* gst/interleave/interleave.c: (gst_interleave_request_new_pad):
Let's not call every request pad we create "sink%d", that'll
create problems if there's to be more than one pad. Fixes#490682.
* tests/check/Makefile.am:
* tests/check/elements/.cvsignore:
* tests/check/elements/interleave.c:
Add unit test for the above.
