Adds that warning to configure.ac
Includes a tiny change of the GST_BOILERPLATE_FULL() macro:
The get_type() function is no longer declared before being defined.
https://bugzilla.gnome.org/show_bug.cgi?id=611692
Make sure we take ownership of the buffer early without increasing its refcount
when we go in the collect function. This reduces the amount of copies needed in
order to make the buffer writable in most cases.
In some cases we can avoid allocating a subbuffer and instead simply ref
the buffer. Callers should perform _make_metadata_writable() in all
cases now.
Add a method to install a clipping function that is called when a buffer is
received. Users of collectpads can then perform clipping on the incomming
buffers.
Also retab the header file a little.
See #590265
This avoids:
* triple-checking for the GType when type-checking is enabled (see #597260)
* Avoids going through an expensive no-argument checking which landed in
glib-2.22
* Avoids going through 2 extrac functions (g_object_new -> g_object_new_valist)
There's not much point in using GST_DEBUG_FUNCPTR with GObject
virtual functions such as get_property, set_propery, finalize and
dispose, since they'll never be used by anyone anyway. Saves a
few bytes and possibly a tenth of a polar bear.
Without this, we risked:
* Checking the flushing state on an unexisting list
* Not setting the flushing state on pads that had just been added
Partially fixes#590056
Original commit message from CVS:
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_available):
Use the name of the pads instead of a pointer, helps in debugging.
Original commit message from CVS:
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_finalize),
(unref_data), (gst_collect_pads_remove_pad),
(gst_collect_pads_check_pads):
Use additional refcounting to avoid crashes when dynamically adding and
removing pads. Fixes#420206.
Original commit message from CVS:
reviewed by: Tim-Philipp Müller <tim at centricular dot net>
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_finalize),
(unref_data), (gst_collect_pads_add_pad_full):
* libs/gst/base/gstcollectpads.h:
Don't put the previously added destroy notify in the GstCollectData
struct as all it's padding is already used and we don't want to break
ABI. Instead put in the pad's GObject data for now. This should be
cleaned up for 0.11 (#402393).
Original commit message from CVS:
reviewed by: Wim Taymans <wim@fluendo.com>
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_finalize),
(unref_data), (gst_collect_pads_add_pad),
(gst_collect_pads_add_pad_full):
* libs/gst/base/gstcollectpads.h:
API: Add function to specify a destroy notification for custom
GstCollectData when adding new pads in GstCollectPads (#402393).
Original commit message from CVS:
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_remove_pad):
unref data at the end when we are done with the pad.
Original commit message from CVS:
Patch by: Sjoerd Simons <sjoerd at luon dot net>
* libs/gst/base/gstcollectpads.c: (ref_data), (unref_data),
(gst_collect_pads_add_pad), (gst_collect_pads_remove_pad),
(gst_collect_pads_stop), (gst_collect_pads_event),
(gst_collect_pads_chain):
* libs/gst/base/gstcollectpads.h:
Add refcounting to the collectpads data so we can track when it's safe
to free the data. Fixes#383382.
Original commit message from CVS:
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_add_pad),
(gst_collect_pads_remove_pad):
Automatically activate/deactivate pads when they are added to a
started/stoped collectpads.
Original commit message from CVS:
* docs/libs/gstreamer-libs-sections.txt:
* docs/plugins/gstreamer-plugins-sections.txt:
Fix docs some more.
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_remove_pad),
(gst_collect_pads_event):
* libs/gst/base/gstcollectpads.h:
Documentation updates.
Free queued buffer when removing a pad.
Original commit message from CVS:
* libs/gst/base/gstcollectpads.c:
(gst_collect_pads_set_flushing_unlocked), (gst_collect_pads_pop),
(gst_collect_pads_clear), (gst_collect_pads_flush),
(gst_collect_pads_event), (gst_collect_pads_chain):
When flushing a pad, also clear the queued buffer so that we don't
accidentally use it when we shouldn't.
Fix leaks by inreffing incomming buffer.
Flush out queued buffers in case of errors.
Fixes#347452.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_configure_segment),
(gst_base_sink_preroll_object), (gst_base_sink_get_position):
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_sink_eventfunc):
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_event):
Don't randomly and silently reset a segment when the format
changes as this is a bug somewhere upstream. Fixes#330379.
Original commit message from CVS:
Patch by: Alessandro Decina <alessandro at nnva dot org>
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_stop):
Make sure the EOS flag is cleared from pads after a flush
or stop. Fixes#343538.
* tests/check/libs/collectpads.c: (GST_START_TEST),
(gst_collect_pads_suite):
Added test for collectpads reusage after EOS.
Original commit message from CVS:
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_remove_pad),
(gst_collect_pads_chain):
Handle the case where a pad is removed from the collection
that could cause the other pads to become collectable.
Original commit message from CVS:
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_check_pads):
When rebuilding the pad list, don't leak the previous list.
Original commit message from CVS:
Patch by: Alessandro Decina <alessandro at nnva dot org>
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_remove_pad):
Unlock mutex when removing an unknown pad.
Fixes#343334.
* tests/check/Makefile.am:
* tests/check/libs/collectpads.c: (collected_cb), (push_buffer),
(push_event), (setup), (teardown), (GST_START_TEST),
(gst_collect_pads_suite), (main):
Added collecpads check, disabled for now as check crashes for
some reason.
Original commit message from CVS:
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/base/gstcollectpads.c:
(gst_collect_pads_set_flushing_unlocked),
(gst_collect_pads_set_flushing), (gst_collect_pads_start),
(gst_collect_pads_stop):
* libs/gst/base/gstcollectpads.h:
API: gst_collect_pads_set_flushing
Added api to set the pads to flushing, usefull for seeking
code in elements using collectpads.
Clear segment when receiving a flush.
Original commit message from CVS:
Patch by: Mark Nauwelaerts <manauw at skynet dot be>
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_remove_pad),
(gst_collect_pads_event):
clear/reset segment info in FLUSH_STOP.
Fixes#336929.
Original commit message from CVS:
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_stop),
(gst_collect_pads_check_collected):
Flush queued buffer on _stop(), fixes playing again (#342454)
Original commit message from CVS:
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_finalize),
(gst_collect_pads_add_pad), (gst_collect_pads_remove_pad),
(gst_collect_pads_set_flushing), (gst_collect_pads_start),
(gst_collect_pads_stop):
* libs/gst/base/gstcollectpads.h:
No need to call _stop in _finalize.
Iterate the main pad list in _finalize.
Added some more debug.
Free lists and data in the right order.
Also free data whem doing _remove_pad when stopped for
backward compatibility protect ::started with PAD_LOCK as
well.
Original commit message from CVS:
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_collect),
(gst_collect_pads_collect_range), (gst_collect_pads_available),
(gst_collect_pads_check_pads), (gst_collect_pads_check_collected),
(gst_collect_pads_event), (gst_collect_pads_chain):
Update docs.
Better debug info.
Catch and return errors from the collect function
Refuse data on eos pads.
Original commit message from CVS:
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_init),
(gst_collect_pads_finalize), (gst_collect_pads_add_pad),
(gst_collect_pads_remove_pad), (gst_collect_pads_set_flushing),
(gst_collect_pads_start), (gst_collect_pads_stop),
(gst_collect_pads_peek), (gst_collect_pads_pop),
(gst_collect_pads_available), (gst_collect_pads_read),
(gst_collect_pads_flush), (gst_collect_pads_check_pads),
(gst_collect_pads_is_collected), (gst_collect_pads_event),
(gst_collect_pads_chain):
* libs/gst/base/gstcollectpads.h:
Clean up the mess that is collectpads, add comments and
FIXMEs where needed.
Maintain a separate pad list so we can add pads while
collecting the other ones. For this we need a new separate
lock (see comics).
Fix memory leak in finalize.
Refactor some weird code to set/unset pad flushing flags, mark
with comments.
Don't crash in _available, _read, _flush when we're EOS.
* tests/check/libs/.cvsignore:
Ignore adapter check binary.
Original commit message from CVS:
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_event):
back out the newsegment handling change, see #340060 for ongoing
discussion
Original commit message from CVS:
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_event):
fix changelog entry about last collectpads change,
add notes about proper fix
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_event):
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_base_init),
(gst_collect_pads_is_collected), (gst_collect_pads_event):
more detailed debug and formatting cleanup
