Original commit message from CVS:
* ext/mpeg2dec/gstmpeg2dec.c:
Reset decoder when handling sequence where libmpeg2 has set
frame period to 0, probably due to a corrupt packet.
Fixes bug #514297
Original commit message from CVS:
* ext/mad/gstid3tag.c: (gst_id3_tag_class_init):
Don't add pad templates for the base class but only in the
subclasses.
Original commit message from CVS:
* ext/lame/gstlame.c:
* ext/lame/gstlame.h:
Fix the case where you initially have stereo input, and so lame's
mode is not set to mono, and then you get input with mono audio and
soon after you get stereo input again. What happened before this
commit is that it would keep the encoding mode as mono. It should
change it back to the one requested by the app (or the default one)
if not requested.
Original commit message from CVS:
* ext/lame/gstlame.c: (gst_lame_sink_event):
Use gst_util_uint64_scale instead of gst_util_uint64_scale_int
as 8 * GST_SECOND is too large for int.
Original commit message from CVS:
Patch by: Mark Nauwelaerts <manauw at syknet dot be>
* ext/lame/gstlame.c: (gst_lame_sink_setcaps),
(gst_lame_sink_event):
Correctly set number of channels when using mono-encoding mode
and fix the duration calculation of the EOS buffer.
Original commit message from CVS:
* ext/mad/gstmad.c: (GST_TYPE_MAD_MODE),
(GST_TYPE_MAD_EMPHASIS), (GST_TAG_EMPHASIS), (CHECK_HEADER):
Call g_type_class_ref() from a thread-safe context and not
from the streaming thread to avoid GLib screwing up (see
bug #349410 and #493432). Comment out unused code.
Original commit message from CVS:
* ext/mad/gstmad.c: (mpg123_parse_xing_header):
* gst/mpegaudioparse/gstmpegaudioparse.c:
(gst_mp3parse_handle_first_frame):
Make sure that the Xing TOC starts with 0 and the entries
are increasing over time. Otherwise it's broken and should
be skipped. Fixes bug #507821.
Original commit message from CVS:
* configure.ac:
Update requirements from past CVS versions to released
versions (0.10.14 in this case).
* ext/sidplay/gstsiddec.cc:
Fix compilation with g++-4.2.
Original commit message from CVS:
* ext/lame/gstlame.c:
Allow fixing the sample rate lame converts to by negotiating fixed
sample rate on the src pad caps.
Add docs for it.
* tests/check/Makefile.am:
* tests/check/pipelines/lame.c:
Add a check for it.
Original commit message from CVS:
Patch by: Daniel Charles <dcharles at ti dot com>
* ext/amrnb/amrnbenc.c: (gst_amrnbenc_bandmode_get_type),
(gst_amrnbenc_set_property), (gst_amrnbenc_get_property),
(gst_amrnbenc_base_init), (gst_amrnbenc_class_init),
(gst_amrnbenc_chain), (gst_amrnbenc_state_change):
* ext/amrnb/amrnbenc.h:
Add property to select the BandMode of the AMR encoder.
See #466442.
Original commit message from CVS:
* configure.ac:
* ext/mad/gstmad.c: (gst_mad_chain):
Use the new buffer clipping function from gstaudio here and
require gst-plugins-base CVS.
Original commit message from CVS:
* ext/mad/gstmad.c: (_do_init), (gst_mad_init), (index_seek),
(normal_seek), (gst_mad_sink_event), (clip_outgoing_buffer),
(gst_mad_chain), (gst_mad_change_state):
* ext/mad/gstmad.h:
Implement buffer clipping and use GST_BOILERPLATE instead of manual
GType magic. Part one of bug #308312.
Original commit message from CVS:
* configure.ac:
* ext/mpeg2dec/gstmpeg2dec.c: (crop_buffer):
* gst/asfdemux/gstasfdemux.c: (gst_asf_demux_descramble_buffer):
* gst/dvdlpcmdec/gstdvdlpcmdec.c: (gst_dvdlpcmdec_chain_raw):
Fix build against core CVS by not using deprecated API. Bump
requirements for new API (overdue anyway).
Original commit message from CVS:
* ext/amrnb/amrnbdec.c: (gst_amrnbdec_base_init),
(gst_amrnbdec_event), (gst_amrnbdec_chain),
(gst_amrnbdec_state_change):
* ext/amrnb/amrnbdec.h:
* ext/amrnb/amrnbparse.c: (gst_amrnbparse_base_init),
(gst_amrnbparse_loop):
Add newsegment and discont handling. Some code cleanups.
Original commit message from CVS:
* ext/dvdread/dvdreadsrc.c:
If we can't read a nav packet, or it doesn't look like a nav
packet, that's an error. Previous behavior was to look at
the next packet; I can't find any justification for doing that.
Fixes: #358891.
Original commit message from CVS:
Patch by: Laurent Glayal <spglegle at yahoo dot fr>
* ext/amrnb/amrnbdec.c: (gst_amrnbdec_class_init),
(gst_amrnbdec_finalize):
Don't leak the adapter, unref it in a new finalize method instead.
Fixes#448782.
Original commit message from CVS:
* ext/dvdnav/dvdnavsrc.c: (gst_dvd_nav_src_set_property):
Don't forget to unlock when setting the device property, or
we'll sooner or later deadlock.
Original commit message from CVS:
* ext/amrnb/amrnbparse.c: (gst_amrnbparse_get_type),
(gst_amrnbparse_class_init), (gst_amrnbparse_init),
(gst_amrnbparse_pull_header), (gst_amrnbparse_loop):
Fix pull mode operation some more: send newsegment event before
sending data; handle EOS and fatal flow returns a bit better; don't
leak buffers in some cases. Misc. minor cleanups. Fixes#431707.
Original commit message from CVS:
2007-03-27 Julien MOUTTE <julien@moutte.net>
* ext/mad/gstmad.c: (gst_mad_chain): Generate a perfect
stream and try to adapt to incoming timestamps lack of
precision up to half a frame. This allows generating
a perfect stream even with muxed formats like FLV where
the timestamps are stored in milliseconds.
Original commit message from CVS:
* ext/lame/gstlame.c: (gst_lame_setup):
Disable the bitrate checking when the user has requested
Free Format mode, as all bitrates less than the maximum
are valid then.
Original commit message from CVS:
* ext/mad/gstmad.c: (gst_mad_convert_sink), (gst_mad_convert_src):
When handling seeks, don't convert -1 start or stop values to a bogus
byte position - pass them upstream as -1.
Original commit message from CVS:
* ext/cdio/gstcdiocddasrc.c: (gst_cdio_cdda_src_open),
(gst_cdio_cdda_src_finalize):
Make sure we always destroy our libcdio handle.
Original commit message from CVS:
* ext/cdio/gstcdiocddasrc.c: (gst_cdio_cdda_src_probe_devices),
(gst_cdio_cdda_src_read_sector), (gst_cdio_cdda_src_open),
(gst_cdio_cdda_src_finalize):
Small code cleanups.
Don't use pad_alloc as the base class cannot deal with the error codes.
Original commit message from CVS:
Patch by: Zaheer Abbas Merali <zaheermerali at gmail com>
* ext/mpeg2dec/gstmpeg2dec.c: (gst_mpeg2dec_chain):
Never post a (fatal) error message on the bus on decoding errors. We
should only do this if we can't recover, but mpeg2dec can always
recover. This is needed for DVB streams, for example, where there
may be temporary glitches in the stream. Instead of an error
message, post a warning message on the bus for every N decoding
errors. Fixes#370020.
Original commit message from CVS:
* ext/lame/gstlame.c: (gst_lame_class_init), (gst_lame_init),
(gst_lame_setup):
Display sensible defaults and limits for the
vbr-min/max/mean properties. Fix the 'hard-limit' VBR min
property - it's supposed to be a boolean 0/1 value.
Original commit message from CVS:
* ext/lame/gstlame.c:
Initialise the variables so gcc doesn't complain about possibly
uninitialised uses, even though they can't actually happen.
Original commit message from CVS:
* ext/lame/gstlame.c: (gst_lame_sink_setcaps),
(gst_lame_set_property), (gst_lame_setup):
Fix up bitrate checking macro. Make it give us a
GST_ELEMENT_WARNING message so the application has a chance of
reporting this to the user. Move the checking to _setup, so we
are sure it runs in the READY state, when we hope to have a pipeline
and a bus that is not flushing.
This fixes e.g. using 96 kbit/sec as a bitrate.
Original commit message from CVS:
* ext/lame/gstlame.c: (gst_lame_sink_event), (gst_lame_chain),
(gst_lame_change_state):
* ext/lame/gstlame.h:
On receiving EOS, we try to push a last buffer with the remaining
samples. Don't do that if we got an unclean flow return on the last
gst_pad_push(), downstream might not handle this very gracefully
(see #403168).
* gst/mpegaudioparse/gstmpegaudioparse.c: (gst_mp3parse_chain):
Pass flow returns upstream (helps #403168).
Original commit message from CVS:
* ext/lame/gstlame.c: (gst_lame_sink_setcaps), (gst_lame_chain):
warn when outgoing sample rate is different from incoming
Original commit message from CVS:
Based on patch by: Roland Kay <roland.kay at ox compsoc net>
* ext/lame/gstlame.c: (gst_lame_init), (gst_lame_chain),
(gst_lame_setup):
* ext/lame/gstlame.h:
Fix leak (by calling lame_init_params() before lame_close()); handle
NULL return from lame_init() more gracefully. Fixes#385311.
Original commit message from CVS:
Patch by: Sebastian Dröge <slomo@circular-chaos.org>
* ext/mpeg2dec/gstmpeg2dec.c: (gst_mpeg2dec_init),
(gst_mpeg2dec_reset), (gst_mpeg2dec_alloc_sized_buf),
(gst_mpeg2dec_alloc_buffer), (init_dummybuf), (handle_slice):
* ext/mpeg2dec/gstmpeg2dec.h:
Align buffers to a 16 byte boundary so the altivec optimisations
don't crash. Fixes#327350.
Original commit message from CVS:
Patch by: Jan Arne Petersen <jpetersen at jpetersen dot org>
* ext/mpeg2dec/gstmpeg2dec.c: (handle_sequence), (handle_slice):
Simplify the framerate code and support more framerates. Fixes#361584.
