Commit graph

359 commits

Author SHA1 Message Date
Havard Graff
ddd032f56b rtpjitterbuffer: fix gap-time calculation and remove "late"
The amount of time that is completely expired and not worth waiting for,
is the duration of the packets in the gap (gap * duration) - the
latency (size) of the jitterbuffer (priv->latency_ns). This is the duration
that we make a "multi-lost" packet for.

The "late" concept made some sense in 0.10 as it reflected that a buffer
coming in had not been waited for at all, but had a timestamp that was
outside the jitterbuffer to wait for. With the rewrite of the waiting
(timeout) mechanism in 1.0, this no longer makes any sense, and the
variable no longer reflects anything meaningful (num > 0 is useless,
the duration is what matters)

Fixed up the tests that had been slightly modified in 1.0 to allow faulty
behavior to sneak in, and port some of them to use GstHarness.

https://bugzilla.gnome.org/show_bug.cgi?id=738363
2015-07-08 23:18:48 +03:00
Stian Selnes
40524e5a49 Revert "rtpjitterbuffer: Fix expected_dts calc in calculate_expected"
This reverts commit 05bd708fc5.

The reverted patch is wrong and introduces a regression because there
may still be time to receive some of the packets included in the gap
if they are reordered.
2015-07-08 23:18:48 +03:00
Sebastian Dröge
4e23481d9f rtpjitterbuffer: Calculate receive time if we don't have any
This is required to properly schedule packet loss timers and make
sure all our calculations work properly.

https://bugzilla.gnome.org/show_bug.cgi?id=749536
2015-07-08 17:02:05 +03:00
Sebastian Dröge
243730ced4 rtpjitterbuffer: Handle seqnum gaps in TCP streams without erroring out or overflowing calculations
That is, handle DTS==GST_CLOCK_TIME_NONE correctly.

https://bugzilla.gnome.org/show_bug.cgi?id=749536
2015-07-08 15:15:00 +03:00
Miguel París Díaz
5ae672fd22 rtpjitterbuffer: Consider timers len to compare with RTP_MAX_DROPOUT
When there are a lot of small gaps, we can consider that there is
a big gap (too losses) to reset the buffer.

https://bugzilla.gnome.org/show_bug.cgi?id=751636
2015-07-02 18:38:46 +02:00
Sebastian Dröge
3df0cce65d rtpjitterbuffer: If possible, always update the current time before looping over all timers
If we have a clock, update "now" now with the very latest running time we have.
If timers are unscheduled below we otherwise wouldn't update now (it's only updated
when timers expire), and also for the very first loop iteration now would otherwise
always be 0.

Also the time is used for the timeout functions, e.g. to calculate any times
for the next timeouts and we would otherwise pass too old times there.

https://bugzilla.gnome.org/show_bug.cgi?id=751636
2015-07-02 16:45:59 +02:00
Miguel París Díaz
2176f31174 rtpjitterbuffer: refactor handle_next_buffer
The goal of this patch is making handle_next_buffer function
more readable avoiding unnecesary gotos and adding other
cosmetic changes.
2015-07-01 16:06:40 +02:00
Sebastian Dröge
de5cd0995b Revert "rtpjitterbuffer: If we have an immediate timeout, don't try to find an earlier timeout"
This reverts commit 0c21cd7177.

If we have multiple immediate timers, we want to first handle the one with the
lowest sequence number... which would be broken now.

Instead of this we should just use a GSequence for the timers, and have them
sorted first by timestamp, and for equal timestamps by sequence number. Then
we would always only have to take the very first timer from the list and never
have to look at any others.
2015-06-29 10:36:58 +02:00
Sebastian Dröge
0c21cd7177 rtpjitterbuffer: If we have an immediate timeout, don't try to find an earlier timeout
If we have lots of such immediate timeouts, we would otherwise have quadratic
runtime in the number of timeouts.
2015-06-29 10:14:05 +02:00
Sangkyu Park
2663388000 rtpjitterbuffer: Minor clean-up
1. Fix the code which is wrong coding style.
2. Fix a typing error of comment.

https://bugzilla.gnome.org/show_bug.cgi?id=751316
2015-06-22 13:08:12 +02:00
Sebastian Dröge
e9902430da rtpjitterbuffer: gst_rtp_buffer_ext_timestamp() modifies its first argument, keep a copy around 2015-06-16 11:43:39 +02:00
Sebastian Dröge
62a7bcb395 rtpjitterbuffer: Compare ext RTP times, not plain RTP time and ext RTP time when calculating elapsed time
Otherwise all RTP times after a wraparound would be considered as going
backwards, they will always be smaller than the ext RTP time.
2015-06-16 10:31:47 +02:00
Sangkyu Park
6696bd62ef rtpjitterbuffer: Minor cleanup
1. Add Null check in 'free_item' function.
2. Fix a typing error of comment.

https://bugzilla.gnome.org/show_bug.cgi?id=750965
2015-06-15 11:55:57 +02:00
Sebastian Dröge
8f5bdf9690 rtpjitterbuffer: Add support for receiving reduced size RTCP
It worked before but gave warnings, now we just ignore RTCP
packets that don't start with a SR. As all we're interested
in here are SRs.
2015-06-05 10:33:11 +02:00
Sebastian Dröge
ca110fb0b8 rtpjitterbuffer: When detecting a huge seqnum gap, wait for 5 consecutive packets before resetting everything
It might just be a late retransmission or spurious packet from elsewhere, but
resetting everything would mean that we will cause a noticeable hickup. Let's
get some confidence first that the sequence numbers changed for whatever
reason.

https://bugzilla.gnome.org/show_bug.cgi?id=747922
2015-05-18 18:43:15 +03:00
Ilya Konstantinov
fd391a5404 rtpjitterbuffer: Fix "stats" property docs
https://bugzilla.gnome.org/show_bug.cgi?id=748436
2015-04-26 21:15:44 +02:00
Luis de Bethencourt
671b4d25cd remove unused enum items PROP_LAST
This were probably added to the enums due to cargo cult programming and are
unused. Removing them.
2015-04-24 17:01:12 +01:00
Sebastian Dröge
edcc5be297 rtpjitterbuffer: When request retransmissions for future packets, consider the packet spacing in the extra delay
We now take the maximum of 2*jitter and 0.5*packet_spacing for the extra
delay. If jitter is very low, this should prevent unnecessary retransmission
requests to some degree.

https://bugzilla.gnome.org/show_bug.cgi?id=748041
2015-04-22 20:27:18 +02:00
Sebastian Dröge
3fe8ceff14 rtpjitterbuffer: Take a running average of the packet spacings instead of just the latest
https://bugzilla.gnome.org/show_bug.cgi?id=748041
2015-04-22 20:25:43 +02:00
Miguel París Díaz
f81c9a9568 rtpjitterbuffer: Add "rtx-next-seqnum" property
If this is set to FALSE, rtpjitterbuffer will not request retransmissions for
future packets based on when they are estimated to arrive.

See also https://bugzilla.gnome.org/show_bug.cgi?id=748041

https://bugzilla.gnome.org/show_bug.cgi?id=739868
2015-04-22 19:51:18 +02:00
Miguel París Díaz
c4bb6a098b rtpjitterbuffer: Add "rtx-max-retries" property
This property allows to limit the maximum number of retransmission
for a specific packet.

https://bugzilla.gnome.org/show_bug.cgi?id=739868
2015-04-13 09:09:03 +02:00
Miguel París Díaz
05bd708fc5 rtpjitterbuffer: Fix expected_dts calc in calculate_expected
Right above we consider lost_packet packets, each of them having duration,
as lost and triggered their timers immediately. Below we use expected_dts
to schedule retransmission or schedule lost timers for the packets that
come after expected_dts.

As we just triggered lost_packets packets as lost, there's no point in
scheduling new timers for them and we can just skip over all lost packets.

https://bugzilla.gnome.org/show_bug.cgi?id=739868
2015-04-13 09:06:33 +02:00
Sebastian Dröge
1a2f253c3a rtpjitterbuffer: Make the next output buffer discont after resetting the jitterbuffer
Resetting the jitterbuffer drops all packets and other things, and will cause
a discontinuity in the packets received by the depayloaders. They should now
also flush anything they had pending as the new data will start at a different
position.

https://bugzilla.gnome.org/show_bug.cgi?id=739868
2015-04-13 09:05:34 +02:00
Nicolas Dufresne
12762ad1a5 rtpjitter: Account for rtx_retry in overflow check
As rtx_retry is part of the substraction, we need to take it into
account, otherwise we may endup with a big value.
2015-03-25 15:25:56 -04:00
Sebastian Dröge
9e934d076b rtpjitterbuffer: Drop packets with sequence numbers before the seqnum-base
These are outside the expected range of sequence numbers and should be
clipped, especially for RTSP they might belong to packets from before a seek
or a previous stream in general.
2015-03-09 11:10:35 +01:00
Sebastian Dröge
38bf3d3808 rtpjitterbuffer: Don't forget to unlock the mutex when receiving GAPs in TCP streams 2015-03-09 10:05:14 +01:00
Sebastian Dröge
735c6c40f8 rtpjitterbuffer: When resetting the jitterbuffer because of packet discont, don't flush sticky events
We will otherwise flush away STREAM_START, CAPS or SEGMENT events and will
confuse downstream with buffers that come before such events.
2015-02-17 16:57:55 +02:00
Sebastian Dröge
87c8c163a8 rtpjitterbuffer: If we get a gap with a buffer without DTS, error out
We (currently?) can't really handle gaps between RTP packets if they're not
properly timestamped. The current code would go into calculations with
GST_CLOCK_TIME_NONE and then cause assertions everywhere. It's probably
better to error out cleanly instead.
2015-01-07 18:05:18 +01:00
Thibault Saunier
aa89278ade rtpjitterbuffer: Use an empty iterator in iterate_internal_link when no links
We used to setup an iterator with 1 GValue set with a NULL object
pointer which is not the normal way to do that. Instead we should make
sure that the first call to gst_iterator_next returns GST_ITERATOR_DONE.
2014-12-03 11:17:11 +01:00
Miguel París Díaz
6daa57868f rtpjitterbuffer: ensure rtx_retry_period >= 0
https://bugzilla.gnome.org/show_bug.cgi?id=739344
2014-11-22 14:48:57 +00:00
Tim-Philipp Müller
d940c21b78 rtpjitterbuffer: implement get/set for new rtx-min-retry-timeout property
Properties are so much more useful if you can actually set
and get their values.
2014-11-02 13:06:33 +00:00
Tim-Philipp Müller
b02d73a0ed rtpjitterbuffer: fix crash on some 32-bit systems
Make sure to pass right number of bits to gst_structure_new()
which is a vararg function.

Fixes elements/rtpaux unit test on ppc32.
2014-10-25 12:45:31 +01:00
Wim Taymans
bd09dc96e9 rtpjitterbuffer: limit the retry frequency
When the RTT and jitter are very low (such as on a local network), the
calculated retransmission timeout is very small. Set some sensible lower
boundary to the timeout by adding a new property. We use the packet
spacing as a lower boundary by default.
2014-10-22 15:04:24 +02:00
Miguel París Díaz
4b5243c43d gstrtpjitterbuffer: add "rtx-min-delay" property
This property is useful to set a min time to wait before sending a
retransmission event.

Fixes https://bugzilla.gnome.org/show_bug.cgi?id=735378
2014-10-22 15:00:27 +02:00
Wim Taymans
0b81b316b5 jitterbuffer: Refactor code
Refactor some code dealing with calculating various timeouts.

See https://bugzilla.gnome.org/show_bug.cgi?id=735378
2014-10-22 14:59:57 +02:00
Wim Taymans
09f179139d rtpjitterbuffer: make debug line less confusing 2014-10-21 13:10:53 +02:00
Youness Alaoui
a98341397d jitterbuffer: Allow rtp caps without clock-rate
The jitterbuffer shouldn't force clock-rate on its sink pad, this will cause a negotiation issue since rtpssrcdemux doesn't have the clock-rate and doesn't add it to the caps. The documentation states that the clock-rate can either be specified through the caps or through the request-pt-map signal, so we must remove clock-rate from the pad templates and we must accept the GST_EVENT_CAPS if the caps don't have the clock-rate.

https://bugzilla.gnome.org/show_bug.cgi?id=734322
2014-08-21 18:32:58 -04:00
Wim Taymans
ca9cfd40dd jitterbuffer: improve SR packet handling
Implement 3 different cases for handling the SR:

 1) we don't have enough timing information to handle the SR packet and
    we need to wait a little for more RTP packets. In that case we keep
    the SR packet around and retry when we get an RTP packet in the
    chain function.

 2) the SR packet has a too old timestamp and should be discarded. It is
    labeled invalid and the last_sr is cleared.

 3) the SR packet is ok and there is enough timing information, proceed
    with processing the SR packet.

Before this patch, case 2) and 1) were handled in the same way,
resulting that SR packets with too old timestamps were checked over and
over again for each RTP packet.
2014-06-25 16:14:46 +02:00
Wim Taymans
b2e1598e4a rtpjitterbuffer: increment accepted packets after loss
When we detect a lost packet, expect packets with higher
seqnum on the input.

Also update the unit test.

Fixes https://bugzilla.gnome.org/show_bug.cgi?id=729524
2014-05-09 18:10:32 +02:00
Jason Litzinger
9068e1bb8e Add new test case. 2014-05-09 18:10:32 +02:00
Mark Nauwelaerts
6c584bc833 rtpjitterbuffer: avoid stall by corrupted seqnum accounting 2014-05-04 13:38:26 +02:00
Wim Taymans
eba3bba524 rtpjitterbuffer: optimize timer update
When we are not doing retransmission, we just need to find the current
seqnum so we can stop when we found it.
2014-04-29 16:26:53 +02:00
Wim Taymans
b2c9646acb rtpjitterbuffer: small optimizations
Small optimizations where we can.
Add some more debug.
2014-04-29 16:21:44 +02:00
Wim Taymans
df04fcbb5d rtpjitterbuffer: signal when next_seqnum changed
Signal the pushing thread when the next_seqnum changed and we might be
able to push a buffer now.
2014-04-29 16:16:17 +02:00
Wim Taymans
3cd0e8ae88 rtpjitterbuffer: only signal event when head changed
After adding a buffer, only signal the pushing thread when the head
buffer changed or else we cause a useless wakeup.
2014-04-29 16:12:29 +02:00
Tim-Philipp Müller
c9597298f9 docs: remove outdated and pointless 'Last reviewed' lines from docs
They are very confusing for people, and more often than not
also just not very accurate. Seeing 'last reviewed: 2005' in
your docs is not very confidence-inspiring. Let's just remove
those comments.
2014-04-26 23:35:17 +01:00
Jan Schmidt
f2d0ddf113 rtpjitterbuffer: Clear last_pt on flush-stop.
Otherwise, we don't recheck the buffer caps for clock-rate
properly on the next chain.
2014-04-23 18:54:16 +10:00
Wim Taymans
3e11ce43b9 jitterbuffer: improve EOS handling
Make a new method to disable the jitterbuffer buffering.
Rework the update_estimated_eos() method. Calculate how much time
there is left to play. If we have less than the delay of the
jitterbuffer, we disabled buffering because we might never be able to
fill the complete jitterbuffer again.
If we receive an EOS event, disable buffering. We will drain the
buffer and eventually push the EOS event out.
When we reach the estimated NPT timeout and we didn't receive an EOS
event, make one and queue it so that it can be pushed.

Fixes https://bugzilla.gnome.org/show_bug.cgi?id=728017
2014-04-18 14:07:31 +02:00
Wim Taymans
42cfedde7f jitterbuffer: assume a full buffer when eos
Rework the logic to make buffering messages a little, make sure we
don't make the same message multiple times.
Consider the buffer full when EOS was received.

Fixes https://bugzilla.gnome.org/show_bug.cgi?id=728017
2014-04-18 04:27:39 +02:00
Sebastian Dröge
897c02cace rtpjitterbuffer: Unref clock id when waiting for the clock is interrupted 2014-04-17 17:00:37 +02:00
Wim Taymans
783b4ba2c4 rtpjitterbuffer: refuse serialied query when buffering
When we are buffering, we can't block and wait for the serialized query
to complete because the jitterbuffer will not try to forward the query
while buffering. Instead, just refuse the query.
2014-04-16 18:16:33 +02:00
Wim Taymans
233e9e64b8 rtpjitterbuffer: don't free the serialized query
We should never free a serialized query in the queue, it is the upstream
caller that will free it.
2014-04-16 18:16:32 +02:00
Wim Taymans
c3de599c4f jitterbuffer: demote warning to debug
For TCP, it is normal that we don't have timestamps so don't WARN on
it.
2014-04-03 12:09:24 +02:00
Tim-Philipp Müller
1d7f5c7a83 rtpjitterbuffer: fix compiler warning
gstrtpjitterbuffer.c: In function 'gst_rtp_jitter_buffer_loop':
gstrtpjitterbuffer.c:2978:3: error: 'result' may be used uninitialized in this function
   while (result == GST_FLOW_OK);
   ^
2014-02-27 00:11:11 +00:00
Sebastian Dröge
d4bdf5a1b1 rtpjitterbuffer: Fix uninitialized variable compiler warning 2014-02-26 21:11:23 +01:00
Jake Foytik
6dd9142592 rtpjitterbuffer: Remove raw comparisons of RTP sequence numbers
Several conditional statements perform comparison on RTP sequence
numbers without taking the sequence number rollover into account.
Instead, use the gst_rtp_buffer_compare_seqnum function to perform the
comparison.

https://bugzilla.gnome.org/show_bug.cgi?id=725159
2014-02-26 21:11:21 +01:00
Wim Taymans
353e510f94 rtpjitterbuffer: add support for serialized queries
See https://bugzilla.gnome.org/show_bug.cgi?id=723850
2014-02-14 15:59:46 +01:00
Wim Taymans
204bd715d2 rtpjitterbuffer: handle expected packet being an RTX packet
If the expected packet (do_next_seqnum is TRUE) is the one we requested
for retranmission earlier, do the logic to update the retransmission
statistics as well before setting up the timers for the next expected
packet.
Also reset the retransmission counter if the timer is reused for another
seqnum.
2014-01-21 17:52:44 +01:00
Wim Taymans
9a3d4d7cbe rtpjitterbuffer: ignore invalid timestamps in rtt calculation
When the input buffer does not have a valid timestamp, don't try to
calculate the round-trip-time.
2014-01-21 15:29:26 +01:00
Aleix Conchillo Flaqué
cdbb2ba6b8 rtpjitterbuffer: do not drop serialized events when latency is set
Serialized events are now queued in the jitter buffer, so we don't
want to drop them even latency is set.

https://bugzilla.gnome.org/show_bug.cgi?id=722372
2014-01-18 10:38:46 +01:00
Wim Taymans
f48bbabafc rtpjitterbuffer: dynamically recalculate RTX parameters
Use the round-trip-time and average jitter to dynamically calculate the
retransmission interval and expected packet arrival time.

Based on patches from Torrie Fischer <torrie.fischer@collabora.co.uk>

Fixes https://bugzilla.gnome.org/show_bug.cgi?id=711412
2013-12-30 11:18:51 +01:00
Wim Taymans
416bd9a2c3 rtpjitterbuffer: calculate average jitter 2013-12-30 11:18:51 +01:00
Wim Taymans
7181a21ca9 rtpsession: use RTT from the Retransmission event
Place the estimated RTT in the Retransmission event and let the session
manager use that instead of the hardcoded value.
2013-12-30 11:18:50 +01:00
Wim Taymans
e996f73d0c jitterbuffer: take more accurate running-time for NACK
Don't use the current time calculated from the tmieout loop for when we
last scheduled the NACK because it might be unscheduled because of a max
packet misorder and then we don't accurately calculate the current time.
Instead, take the current element running time using the clock.
2013-12-30 11:18:50 +01:00
Wim Taymans
eee515cb2c rtpjitterbuffer: serialize events in the buffer
Serialize events into the jitterbuffer by inserting them with a -1
seqnum.
Update unit test to expect events from the streaming thread.

Fixes https://bugzilla.gnome.org/show_bug.cgi?id=652986
2013-12-10 11:57:37 +01:00
Wim Taymans
36e78bc5ca rtpjitterbuffer: detect -1 seqnum
Keep the seqnum as a full guint so that we can check for -1 entries and
deal with them correctly.
Immediately try to push -1 seqnum.
2013-12-10 11:04:06 +01:00
Wim Taymans
710d1f3a2a rtpjitterbuffer: improve clear-pt-map handling
Don't reset the expected output seqnum when clearing the pt map because this
could stall the jitterbuffer forever.
Add a unit test for this.

Fixes https://bugzilla.gnome.org/show_bug.cgi?id=709800
2013-11-25 15:52:22 +01:00
Tim-Philipp Müller
901ec63462 rtpjitterbuffer: fix wake-up when new buffers come in after running empty
Spotted by 'gratias' on IRC. Probably introduced in recent refactoring.

https://bugzilla.gnome.org/show_bug.cgi?id=715039
2013-11-25 00:37:50 +00:00
Wim Taymans
4c9474905b rtpjitterbuffer: pass downstream flowreturn to upstream
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=712722
2013-11-22 12:27:31 +01:00
Tim-Philipp Müller
d506409af5 docs: get rid of 'Since: 0.10.x' markers
And some gtk-doc markup fixes.
2013-11-18 14:47:35 +00:00
Tim-Philipp Müller
548e756e0a rtpmanager: fix Since markers
Should be next stable release series version
2013-11-16 12:15:14 +00:00
George Kiagiadakis
387e3b918a rtpjitterbuffer: Fix stats property field names and documentation 2013-11-15 16:23:34 +02:00
Wim Taymans
b450d31503 rtpjitterbuffer: rename property to 'stats'
This makes the unit test work.
We can later also add more stats, not specific to retransmission.

Fixes https://bugzilla.gnome.org/show_bug.cgi?id=711411
2013-11-14 09:24:26 +01:00
Torrie Fischer
22ceb80ba9 rtpjitterbuffer: implement rtx statistics 2013-11-14 09:24:26 +01:00
Wim Taymans
2e5b462ae3 jitterbuffer: advance expected seqnum after dropping
After dropping a buffer, move our expected seqnum

Conflicts:
	gst/rtpmanager/gstrtpjitterbuffer.c
2013-11-13 12:02:57 +01:00
George Kiagiadakis
b81b2efa3e rtpjitterbuffer: fix crash when do-retransmission=true and a lot of buffers are lost
The problem here was that the jitterbuffer lock was unlocked to push
the event, but that caused another thread to remove the timer currently
being processed, probably because the amount of rtx events
(and therefore timers) was getting too high. The solution is to
unlock and push the event only after timer processing has finished.

fixes https://bugzilla.gnome.org/show_bug.cgi?id=711131
2013-11-11 11:51:45 +01:00
Wim Taymans
d4892859d4 jitterbuffer: fix race in flush-start/flush-stop
When flush-stop arrives before we process the result of the _push() in the
loop function, we might pause even though we are not flushing anymore. Fix this
race by waiting for the srcpad loop function to completely pause after doing the
flush-start.
2013-10-04 12:35:18 +02:00
Wim Taymans
00056965e8 rtpjitterbuffer: fix race when updating the next_seqnum
If we were not waiting for the missing seqnum when we insert the lost packet
event in the jitterbuffer, we end up not updating the next_seqnum and wait
forever for the lost packets to arrive. Instead, keep track of the amount of
packets contained by the jitterbuffer item and update the next expected
seqnum only after pushing the buffer/event. This makes sure we correctly handle
GAPS in the sequence numbers.
2013-09-30 12:31:00 +02:00
Wim Taymans
fde438791e rtpjitterbuffer: small debug improvement 2013-09-30 12:30:23 +02:00
Wim Taymans
03d520eb69 rtpjitterbuffer: pause timer when PAUSED
Also pause the timer when we go to the PAUSED state. It is possible that we
don't have a clock or base-time in PAUSED to perform the timeouts.
2013-09-30 11:16:32 +02:00
Wim Taymans
4a31aec513 rtpjitterbuffer: improve debug 2013-09-30 11:15:25 +02:00
Wim Taymans
97f4674655 rtpjitterbuffer: calculate some stats 2013-09-25 10:50:05 +02:00
Wim Taymans
b1d29483bb rtpjitterbuffer: move send_lost_event function
Move the send_lost_event function to the do_lost_event handling, there is no
need to have a separate function.
2013-09-25 10:50:05 +02:00
Wim Taymans
adf5d96044 rtpmanager: update docs 2013-09-23 16:34:15 +02:00
Wim Taymans
e5019de80d docs: update docs with 1.0 element names 2013-09-23 15:36:47 +02:00
Wim Taymans
8ce674da87 rtpjitterbuffer: always store lost event in jitterbuffer
Always prepare a lost event in the jitterbuffer, it is to wake up and make the
pushing thread continue. We drop the event when we are not supposed to push lost
events downstream.
2013-09-23 14:45:27 +02:00
Wim Taymans
9f3345fcc2 rtpjitterbuffer: schedule lost event differently
Schedule the lost event by placing it inside the jitterbuffer with the seqnum
that was lost so that the pushing thread can interleave and push it properly.
2013-09-23 14:45:27 +02:00
Wim Taymans
28641e3145 rtpjitterbuffer: add type to the item
So that the upper layer can know what data is contained in the item.
2013-09-23 14:45:26 +02:00
Wim Taymans
479c7642fd rtpjitterbuffer: fix flush
Pass function to flush to properly free the queue items.
2013-09-23 14:45:25 +02:00
Wim Taymans
39a2ba669d rtpjitterbuffer: use structure to hold packet information
Make the jitterbuffer operate on a structure containing all the packet
information. This avoids mapping the buffer multiple times just to get the RTP
information. It will also make it possible to store other miniobjects such as
events later.
2013-09-23 14:45:25 +02:00
Wim Taymans
1760817005 rtpjitterbuffer: update expected timer when possible
When we receive a packet and we have some missing packets, we can update their
estimated arrival times based on the timestamp difference.
2013-09-23 14:45:25 +02:00
Wim Taymans
fdc1ed1680 rtpjitterbuffer: fix order of timeout events
Improve the order of the timeout events, if there are timers with the same
timeout, we want to trigger the lowest seqnum first. For this we need to loop
over the complete array of timers to find the best one before triggering the
timeout.
2013-09-23 14:45:25 +02:00
Wim Taymans
0b1a7edfea rtpjitterbuffer: send lost event before signaling next buffer
First send the lost event, then update the next_seqnum counter and then
send the signal to the pushing thread that it can retry to push a buffer. This
avoids pushing out buffers before the lost event is pushed.
2013-09-23 14:45:25 +02:00
Wim Taymans
5051f51f0a jitterbuffer: configure clock-rate on jitterbuffer
Add a get and setter to configure the clock-rate in the jitterbuffer instead of
passing it as an argument to the insert method.
2013-09-23 14:45:24 +02:00
Wim Taymans
3c421e7e48 rtpjitterbuffer: add option to reset retransmission timers 2013-09-23 14:45:24 +02:00
Wim Taymans
6f4deab298 rtpjitterbuffer: stop the timer thread
The timeout code could release the lock so we need to check if we are allowed to
wait for the clock some more.
2013-09-23 14:45:24 +02:00
Wim Taymans
cba4e6a707 rtpjitterbuffer: unlock only once 2013-09-23 14:45:24 +02:00
Wim Taymans
5dc207948c rtpjitterbuffer: improve flush and shutdown
There is no need to unschedule the timer in flush-start, flush-stop will remove
the timers and unschedule.
Unschedule the current timer before attempting to join the timer thread.
2013-09-23 14:45:23 +02:00
Wim Taymans
a512cc2d3c rtpjitterbuffer: set correct expected time
When we already have a timer for a packet, skip it but don't forget to adjust
the dts to the expected dts of the next packet.
2013-09-23 14:45:23 +02:00
Wim Taymans
517ea0f4d9 jitterbuffer: improve debug 2013-09-23 14:45:23 +02:00