Commit graph

479 commits

Author SHA1 Message Date
Mathieu Duponchelle
cddb0e951f splitmuxsrc: don't queue data on unlinked pads
Once a pad has returned NOT_LINKED, the part reader shouldn't let its
corresponding data queue run full and eventually (after 20 seconds)
stall playback.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3145>
2022-10-10 18:11:12 +00:00
Sebastian Dröge
bd5a4d321b rtpsource: Don't do probation for RTX sources
Disable probation for RTX sources as packets will arrive very
irregularly and waiting for a second packet usually exceeds the deadline
of the retransmission.

Fixes https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/issues/181

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3112>
2022-10-10 14:56:18 +00:00
Sebastian Dröge
5568cb33f7 rtp: examples: client-rtpaux: Provide correct caps by payload type and RTX pt map by session
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3112>
2022-10-10 14:56:18 +00:00
George Kiagiadakis
8dd512fd9f tests/check/rtpsession: extend test_internal_sources_timeout
to verify that rtx SSRCs do not BYE after timeout

See https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/issues/360

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3112>
2022-10-10 14:56:18 +00:00
Sebastian Dröge
72b6dabd32 rtpsession: Remember the corresponding media SSRC for RTX sources
This allows timing out the RTX source and sending BYE for it when the
actual media source belonging to it is timed out.

This change only applies to sending sources from this session.

Fixes https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/issues/360

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3112>
2022-10-10 14:56:17 +00:00
Sebastian Dröge
d5c072fadd rtpsource: Rename rtp_source_update_caps to rtp_source_update_send_caps
To make it clear that this is only used for sending RTP sources.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3112>
2022-10-10 14:56:17 +00:00
Sebastian Dröge
97a47341a7 rtpsession: Rename gst_rtp_session_sink_setcaps to gst_rtp_session_setcaps_recv_rtp
to make it clearer that this is for setting receiver caps and to make it
more consistent with gst_rtp_session_setcaps_send_rtp.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3112>
2022-10-10 14:56:17 +00:00
Sebastian Dröge
bacd92274d rtspsrc: Retry SETUP with non-compliant URL resolution on "Bad Request" and "Not found"
Various RTSP servers/cameras assume base and control URL to be simply
appended instead of being resolved according to the relative URL
resolution algorithm as mandated by the RTSP specification.

To work around this, try using such a non-compliant control URL if the
server didn't like the URL used in the first SETUP request.

Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1447
Fixes https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/issues/922

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3127>
2022-10-07 09:12:00 +00:00
Tim-Philipp Müller
99bbb1ef35 Back to development
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3115>
2022-10-04 03:57:31 +01:00
Tim-Philipp Müller
9820e58be6 Release 1.21.1 2022-10-04 01:18:20 +01:00
Tim-Philipp Müller
c376d80e9b Update ChangeLogs for 1.21.1 2022-10-04 01:13:59 +01:00
Edward Hervey
f2a1769236 qtdemux: Don't stop task when resetting
This is a regression that was introduced in
cca2f555d1 (yes, 9 years ago).

The only place where a demuxer streaming thread should be stopped is when the
sinkpad is deactivated from pull mode (i.e. PAUSED->READY).

Attempting to stop the task in this function would cause this to happen when a
FLUSH_STOP or STREAM_START event is received... which can cause deadlocks.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3109>
2022-10-03 14:41:18 +02:00
Mathieu Duponchelle
f8d8d67b8b splitmuxsrc: don't consider unlinked pads when deactivating part
If splitmuxsrc exposes multiple pads, but only one is linked, part pads
will never see an EOS event. This shouldn't prevent the part from being
eventually deactivated.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3099>
2022-10-01 02:33:08 +00:00
Nirbheek Chauhan
0aa9d8ade6 rtspsrc: Fix usage of IPv6 connections in SETUP
If the SETUP request returns an IPv6 server address in the Transport
field, we would generate an incorrect URI, and multiudpsink would fail
to initialize:

```
     rtspsrc gstrtspsrc.c:9780:dump_key_value:<source>    key: 'Transport', value: 'RTP/AVP;unicast;source=fe80::dc27:25ff:fe5e:bd13:8080;client_port=62696-62697;server_port=4000-4001'
...
     rtspsrc gstrtspsrc.c:4595:gst_rtspsrc_stream_configure_udp_sinks:<source> configure RTP UDP sink for fe80::dc27:25ff:fe5e:bd13:8080:4000
...
multiudpsink gstmultiudpsink.c:1229:gst_multiudpsink_configure_client:<udpsink0> error: Invalid address family (got 23)
```

We can't look at stream->is_ipv6 because we can't rely on the server
returning the right value there. In the issue reported about this,
server reported itself as `KuP RTSP Server/0.1`, and the SDP was:

```
c=IN IP4
m=video 54608 RTP/AVP 96
a=rtpmap:96 H264/90000
```

So we need to parse the string value and figure out the family
ourselves.

Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1058

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1819>
2022-09-27 18:59:59 +00:00
Tim-Philipp Müller
02a8f9973b qtdemux: guard against timestamp calculation overflow in gap event loop
Could possibly cause an endless loop.

Fixes #1400.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3084>
2022-09-27 13:07:15 +00:00
Jan Schmidt
3c2c4bbe2c dashdemux2: fix mpd unit test expectations
Update unit test for some mpd cases that were reporting
timestamps including the period start time, while
dashdemux2 expects that it needs to add the period
start time itself.

Fix the tests to not expect the period start time
to be included.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3025>
2022-09-27 00:00:49 +00:00
Junsoo Park
699f2ebb45 dashdemux2: Set timestamp relative to period start
These values will be referred to as timestamp relative to period start
so need to subtract period start time from the values.

Fixes a problem with determining the start position when playing Live content
with SegmentTimeline, presentationTimeOffset and a non-0 period start time.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3025>
2022-09-27 00:00:49 +00:00
Jakub Adam
cccc7a12e1 vp9: check if libvpx supports high bit depth
Detect at runtime if libvpx is compiled with --enable-vp9-highbitdepth
and enable 10bit video formats in element caps accordingly.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3067>
2022-09-23 13:55:12 +02:00
Nirbheek Chauhan
a0e6278dba meson: Use implicit builtin dirs in pkgconfig generation
Starting with Meson 0.62, meson automatically populates the variables
list in the pkgconfig file if you reference builtin directories in the
pkgconfig file (whether via a custom pkgconfig variable or elsewhere).
We need this, because ${prefix}/libexec is a hard-coded value which is
incorrect on, for example, Debian.

Bump requirement to 0.62, and remove version compares that retained
support for older Meson versions.

Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1245

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3061>
2022-09-21 21:08:11 +05:30
Seungha Yang
a9144f5313 adaptivedemux2: Always wake up loop thread on unpause
Otherwise loop thread will sleep forever because
GstAdaptiveDemuxLoop.paused flag update is not signalled
when loop was marked as stopped already from other thread.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3057>
2022-09-21 09:26:22 +00:00
Jan Schmidt
a03f3df626 adaptivedemux2: Rework input download wakeups
Change the way streams are woken up to download more data.

Instead of checking the level on tracks that are being
output as data is dequeued, calculate a 'wakeup time'
at which it should download more data, and wake up
the stream when the global output position crosses
that threshold.

For efficiency, compute the earliest wakeup time
for all streams and store it on the period, so the
output loop can quickly check only a single value
to decide if something needs waking up.

Does the same buffering as the previous method,
but ensures that as we approach the end of
one period, the next period continues incrementally
downloading data so that it is fully buffered when
the period starts.

Fixes issues with multi-period VOD content where
download of the second period resumes only after
the first period is completely drained.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3055>
2022-09-20 19:48:17 +00:00
Edward Hervey
fdfa70997b hlsdemux2: Handle negative time mappings
Some servers can return playlists with "old" media playlists and different
Discont Sequence.

In those cases, the segment stream times would be negative when creating a new
time mapping. In order to properly handle such scenarios, shift the values to
stored accordingly to end up with non-negative reference stream time.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3054>
2022-09-20 14:34:34 +00:00
Mart Raudsepp
beece4e778 shout: fix minimum requirement to libshout >= 2.4.3
commit e64c6f0b93 added usage of the SHOUT_USAGE_UNKNOWN symbol, but this
became available in the Icecast-libshout 2.4.3 release, not 2.4.2

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3048>
2022-09-19 20:50:25 +03:00
Elliot Chen
e76e98d109 v4l2videodec: add cap negotiation fail check in the capture configuration change
The capture configuration change may cause negotiation fail.
Need to check it to avoid enter the endless loop.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2960>
2022-09-17 21:21:22 +00:00
Thibault Saunier
ebcaf35839 doc: Do not build plugins to build the doc
It is not actually necessary

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2954>
2022-09-15 20:11:46 +00:00
Tim-Philipp Müller
2ac5d687e1 tests: add a few more orc tests
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3029>
2022-09-15 12:14:56 +01:00
Edward Hervey
124f93a05d hlsdemux2: Fix crash on live playlist with single entry
If there is a single entry, we would end up computing a minimum distance of 0,
and would therefore read entries from after the segment array

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3024>
2022-09-14 15:14:08 +01:00
Zebediah Figura
c4681ac428 meson: Build with -Wl,-z,nodelete to prevent unloading of dynamic libraries and plugins
GLib made the unfortunate decision to prevent libgobject from ever being
unloaded, which means that now any library which registers a static type
can't ever be unloaded either (and any library that depends on those,
ad nauseam).

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/778>
2022-09-13 15:48:52 +00:00
Jan Schmidt
e5e72ede26 adaptivedemux2: Always check bitrate in live
When advancing fragment in live, it's normal to return
GST_FLOW_EOS when playing at the live edge of the available
fragments. In that case, we still want to adjust bitrate
dynamically.

Fixes issue with dashdemux2 where the current bitrate of
each adaptation set is changed to the lowest one when
updating the mpd for a live stream.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3020>
2022-09-13 09:02:43 +00:00
Matt Crane
e64a5b9a85 rtpjitterbuffer: Fix calculation of reference timestamp metadata
Add support for RTCP SRs that contain RTP timestamps later than the
current timestamps in the RTP stream packet buffers.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3019>
2022-09-12 20:17:08 +00:00
Filip Hanes
29aec57ef6 pngenc: lower minimum width and height to 1x1
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3003>
2022-09-09 09:59:56 +00:00
Edward Hervey
855dabb578 dashdemux2: Remove bogus limitation checks for duration fields
Just like for the seconds field, there are no limitations on the hours and
minutes fields. The specification for xml schema duration fields doesn't forbid
specifying durations with only (huge) minutes or hours values.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2951>
2022-09-07 12:48:28 +00:00
Jan Schmidt
43209d0ee6 dashdemux2: Preserve current representation on live manifest updates
When updating a manifest during live playback, preserve the current
representation for each stream.

During update_fragment_info, if the current representation changed
because it couldn't be matched, trigger a caps change and new
header download.

This reverts commit e0e1db212f
and reapplies "dashdemux: Fix issue when manifest update sets slow start
without passing necessary header & caps changes downstream" with
changes.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2920>
2022-09-05 16:07:00 +00:00
Sebastian Dröge
cc454f0fc3 rtpjitterbuffer: Add test for crash caused by removing timers twice
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2973>
2022-09-03 09:26:24 +00:00
Sebastian Dröge
648b8f3362 rtpjitterbuffer: Make it more explicit that update_rtx_timers() takes ownership of the passed in timer
It is not valid anymore afterwards and must not be used, otherwise an
already freed pointer might be used.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2973>
2022-09-03 09:26:24 +00:00
Sebastian Dröge
e66f5e2423 rtpjitterbuffer: Don't shadow variable
While this didn't cause any problems in this context it is simply
confusing.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2973>
2022-09-03 09:26:24 +00:00
Sebastian Dröge
0b19c457ca rtpjitterbuffer: Change RTX timer availability checks to assertions
It's impossible to end up in the corresponding code without a timer for
RTX packets because otherwise it would be an unsolicited RTX packet and
we would've already returned early.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2973>
2022-09-03 09:26:24 +00:00
Sebastian Dröge
2ca849499e rtpjitterbuffer: Only unschedule timers for late packets if they're not RTX packets and only once
Timers for RTX packets are dealt with later in update_rtx_timers(), and
timers for non-RTX packets would potentially also be unscheduled a
second time from there so avoid that.

Also don't shadow the timer variable from the outer scope but instead
make use of it directly.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2973>
2022-09-03 09:26:24 +00:00
Patricia Muscalu
3c9e4f4886 rtph265: keep delta unit flag
Without this patch all buffers that pass the payloader
are marked as non-delta-unit buffers.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2969>
2022-09-02 08:56:13 +00:00
Thibault Saunier
6a4425e46a meson: Call pkgconfig.generate in the loop where we declare plugins dependencies
Removing some copy pasted code

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2970>
2022-09-01 21:17:35 +00:00
Thibault Saunier
bc9c1e3956 meson: Namespace the plugins_doc_dep/libraries variables
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2970>
2022-09-01 21:17:35 +00:00
Thibault Saunier
b5e90fe579 meson: Rename plugins list and make them "dependency" objects
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2970>
2022-09-01 21:17:35 +00:00
Raul Tambre
e1d3612321 rtpjitterbuffer: remove lost timer for out of order packets
When receiving old packets remove the running lost timer if present.
This fixes incorrect reporting of a lost packet even if it arrived in time.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2922>
2022-09-01 09:01:31 +00:00
Sebastian Dröge
cbc6761199 rtpvp8depay: If configured to wait for keyframes after packet loss, also do that if incomplete frames are detected
This can happen if the data inside the packets is incomplete without the
seqnums being discontinuous because of ULPFEC being used.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2947>
2022-08-31 08:58:03 +00:00
Stéphane Cerveau
6b1ffadb0c docs: disable in static build
Following gst-plugins-base, disable docs if static_build
in:
 - gstreamer
 - gst-plugins-good
 - gst-plugins-ugly
 - gst-libav
 - gstreamer-vaapi

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2529>
2022-08-30 14:46:28 +00:00
Jianhui Dai
625e74100d v4l2allocator: Fix invalid imported dmabuf fd
Fix a typo that set userptr to dmabuf fd. It leads to failure of
dmabuf-import io-mode.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2935>
2022-08-24 09:59:14 +00:00
Mathieu Duponchelle
8756f523d1 playback: add onvif metadata caps to raw caps
+ remove encoding from x-onvif-metadata caps output by qtdemux

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2889>
2022-08-24 12:21:18 +03:00
zhiyuan.liu
ffebd52e46 isoff: Fix earliest pts field parse issue
earliest pts will be covered by first_offset field on version 0 case.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2927>
2022-08-23 10:59:56 +00:00
Jan Alexander Steffens (heftig)
5ae3c9318d adaptivedemux2: Fix download helper with libsoup 3.0.x
libsoup 3.0.x dispatches using a single source attached when the session
is created, so we need to create the session with the same context that
our download thread is later using.

2.74 or 3.1 will dispatch a response using the context which sent the
request. However, for any context other than the one that created the
session, this will also create and destroy sources, so there's still
some slight performance benefit.

Fixes: https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1384
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2913>
2022-08-18 20:16:18 +00:00
Jan Schmidt
ba8f14e922 adaptivedemux2: Implement send_event() vfunc
Handle select-streams and seek events in an element
level send_event() vfunc, so they can be received
before any source pads are created.

This allows preferred streams to be selected before
segment downloading starts.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2912>
2022-08-18 15:30:05 +01:00