Original commit message from CVS:
* examples/Makefile.am:
* examples/helloworld/helloworld.c: (event_loop), (main):
* examples/queue/queue.c: (event_loop), (main):
* examples/queue2/queue2.c: (main):
Update a couple of the examples to work again.
* gst/base/gstbasesink.c: (gst_base_sink_preroll_queue_empty),
(gst_base_sink_preroll_queue_flush), (gst_base_sink_handle_event):
Spelling corrections and extra debug.
* gst/gstbin.c: (gst_bin_class_init), (gst_bin_init), (is_eos),
(gst_bin_add_func), (bin_element_is_sink), (gst_bin_get_state),
(gst_bin_change_state), (gst_bin_dispose), (bin_bus_handler):
* gst/gstbin.h:
* gst/gstpipeline.c: (gst_pipeline_init), (gst_pipeline_dispose),
(gst_pipeline_change_state):
* gst/gstpipeline.h:
Move the bus handler for children to the GstBin, and create a
separate bus for receiving messages from children to the one the
bus sends 'upwards' on.
Original commit message from CVS:
* docs/pwg/advanced-negotiation.xml:
* docs/pwg/building-boiler.xml:
* docs/pwg/building-pads.xml:
* docs/pwg/pwg.xml:
* examples/pwg/Makefile.am:
Add a chapter on caps negotiation, simplify the original code
samples a bit w.r.t. caps negotiation, add link to the advanced
section. Add a bunch of examples showing different use cases of
different types of caps negotiation. Upstream renegotiation isn't
fully documented yet since nobody knows how that works.
Original commit message from CVS:
* docs/manual/advanced-dataaccess.xml:
* examples/manual/Makefile.am:
Add probe example.
* gst/gstpad.c: (_gst_do_pass_data_accumulator):
Make work (??).
Original commit message from CVS:
* docs/manual/advanced-clocks.xml:
* docs/manual/advanced-interfaces.xml:
* docs/manual/advanced-metadata.xml:
* docs/manual/advanced-position.xml:
* docs/manual/advanced-schedulers.xml:
* docs/manual/advanced-threads.xml:
* docs/manual/appendix-porting.xml:
* docs/manual/basics-bins.xml:
* docs/manual/basics-bus.xml:
* docs/manual/basics-elements.xml:
* docs/manual/basics-helloworld.xml:
* docs/manual/basics-pads.xml:
* docs/manual/highlevel-components.xml:
* docs/manual/manual.xml:
* docs/manual/thread.fig:
Update (until threads/scheduling) Application Development Manual;
remove GstThread, add GstBus, add simple porting checklist, add
documentation for tag writing, clocks, make all examples until this
part compile and run.
* examples/manual/Makefile.am:
Update from changes to Application Development Manual; add bus
example, remove thread example.
Original commit message from CVS:
2005-06-28 Andy Wingo <wingo@pobox.com>
* *.c: Don't cast to GST_OBJECT when reffing or unreffing. Large
source-munging commit!!!
Original commit message from CVS:
First THREADED backport attempt, focusing on adding locks and
making sure the API is threadsafe. Needs more work. More docs
follow this week.
Original commit message from CVS:
* docs/manual/advanced-dataaccess.xml:
Add section on how to use fakesrc/fakesink/identity in your
application, plus section on how to embed plugins. Also mention
probes.
* docs/manual/appendix-checklist.xml:
* docs/manual/appendix-debugging.xml:
* docs/manual/appendix-gnome.xml:
* docs/manual/appendix-integration.xml:
Debug -> checklist, GNOME -> integration, add sections on Linux,
KDE integration and add other things useful for application
development.
* docs/manual/manual.xml:
Remove some fixmes, update some file pointers.
* docs/pwg/appendix-checklist.xml:
Fix typo.
* docs/pwg/building-boiler.xml:
Remove ugly header and add commented fixme.
* docs/pwg/pwg.xml:
Add fixme.
* examples/manual/Makefile.am:
Add example for added docs.
Original commit message from CVS:
* docs/manual/advanced-autoplugging.xml:
* docs/manual/advanced-schedulers.xml:
* docs/manual/advanced-threads.xml:
Rewrites. Remove cothreads, go a bit into opt specifically,
document threads and their gotchas, and do some technical stuff
on autoplugging plus add some working examples. Fixes#157395.
* examples/manual/Makefile.am:
Add typefind/autoplugger example (one that actually works).
Remove queue example since it's a duplicate of the thread one.
Original commit message from CVS:
* docs/manual/advanced-autoplugging.xml:
* docs/manual/advanced-clocks.xml:
* docs/manual/advanced-interfaces.xml:
* docs/manual/advanced-metadata.xml:
* docs/manual/advanced-position.xml:
* docs/manual/advanced-schedulers.xml:
* docs/manual/advanced-threads.xml:
* docs/manual/appendix-gnome.xml:
* docs/manual/appendix-programs.xml:
* docs/manual/appendix-quotes.xml:
* docs/manual/autoplugging.xml:
* docs/manual/basics-bins.xml:
* docs/manual/basics-data.xml:
* docs/manual/basics-elements.xml:
* docs/manual/basics-helloworld.xml:
* docs/manual/basics-init.xml:
* docs/manual/basics-pads.xml:
* docs/manual/basics-plugins.xml:
* docs/manual/bins-api.xml:
* docs/manual/bins.xml:
* docs/manual/buffers-api.xml:
* docs/manual/buffers.xml:
* docs/manual/clocks.xml:
* docs/manual/components.xml:
* docs/manual/cothreads.xml:
* docs/manual/debugging.xml:
* docs/manual/dparams-app.xml:
* docs/manual/dynamic.xml:
* docs/manual/elements-api.xml:
* docs/manual/elements.xml:
* docs/manual/factories.xml:
* docs/manual/gnome.xml:
* docs/manual/goals.xml:
* docs/manual/helloworld.xml:
* docs/manual/helloworld2.xml:
* docs/manual/highlevel-components.xml:
* docs/manual/highlevel-xml.xml:
* docs/manual/init-api.xml:
* docs/manual/intro-basics.xml:
* docs/manual/intro-motivation.xml:
* docs/manual/intro-preface.xml:
* docs/manual/intro.xml:
* docs/manual/links-api.xml:
* docs/manual/links.xml:
* docs/manual/manual.xml:
* docs/manual/motivation.xml:
* docs/manual/pads-api.xml:
* docs/manual/pads.xml:
* docs/manual/plugins-api.xml:
* docs/manual/plugins.xml:
* docs/manual/programs.xml:
* docs/manual/queues.xml:
* docs/manual/quotes.xml:
* docs/manual/schedulers.xml:
* docs/manual/states-api.xml:
* docs/manual/states.xml:
* docs/manual/threads.xml:
* docs/manual/typedetection.xml:
* docs/manual/win32.xml:
* docs/manual/xml.xml:
Try 2. This time, include a short preface as a "general
introduction", also add code blocks around all code samples
so they get compiled. We still need a way to tell readers
the filename of the code sample. In some cases, don't show
all code in the documentation, but do include it in the generated
code. This allows for focussing on specific bits in the docs,
while still having a full test application available.
* examples/manual/Makefile.am:
Fix up examples for new ADM. Add several of the new examples that
were either added or were missing from the build system.
* examples/manual/extract.pl:
Allow nameless blocks.
Original commit message from CVS:
* docs/manual/elements-api.xml:
* docs/manual/helloworld.xml:
* examples/manual/extract.pl:
fix last example. Add example of adding code blocks that are not
shown in docbook output.
Original commit message from CVS:
* docs/manual/dynamic.xml:
* docs/manual/elements-api.xml:
* docs/manual/gnome.xml:
* docs/manual/helloworld2.xml:
* docs/manual/init-api.xml:
* docs/manual/queues.xml:
* docs/manual/threads.xml:
* docs/manual/xml.xml:
* examples/manual/extract.pl:
Make it possible to extract example code from separate blocks.
Should make Ronald happy.
Original commit message from CVS:
* docs/Makefile.am:
* docs/manual/elements-api.xml:
restructure so that common stuff is shown first
* docs/manual/init-api.xml:
convert to examples
* docs/manual/manual.xml:
* docs/manuals.mak:
* docs/url.entities:
link to API on the website, possibly override later in build
* examples/manual/.cvsignore:
ignore more
* examples/manual/Makefile.am:
add more examples
* examples/manual/extract.pl:
error out on failure
Original commit message from CVS:
* common/as-libtool.mak: Fine-tune DLL building.
* configure.ac: Link plugins against libgstreamer. Define plugindir
(like gst-plugins)
* examples/plugins/Makefile.am: remove plugindir
* gst/autoplug/Makefile.am: DLL building fixes
* gst/elements/Makefile.am: DLL building fixes. Disable pipefilter on
Windows.
* gst/elements/gstelements.c: Conditionally disable pipefilter.
* gst/indexers/Makefile.am: DLL building fixes
* gst/schedulers/Makefile.am: DLL building fixes.
* libs/gst/bytestream/Makefile.am: DLL building fixes.
* libs/gst/control/Makefile.am: same
* libs/gst/getbits/Makefile.am: same
* testsuite/Makefile.am: New dlopen directory
* testsuite/dlopen/Makefile.am: Tests to check if libgstreamer works
when dlopened.
* testsuite/dlopen/dlopen_gst.c: (main): same
* testsuite/dlopen/loadgst.c: (do_test): same
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt: Remove deprecated symbols.
* docs/gst/tmpl/gstinfo.sgml: same
* docs/gst/tmpl/gstutils.sgml: Remove a bunch of bogus crap that
gtk-doc put here.
* gst/gstutils.h: Remove the \ that was confusing gtk-doc.
* examples/queue/queue.c: (main): We iterate pipelines, not
bins. (bug #139996)
Original commit message from CVS:
* gst/gstbin.c: (gst_bin_set_element_sched),
(gst_bin_unset_element_sched):
don't add decoupled elements to schedulers - otherwise it's
impossible to control if a link to a decoupled element was already
removed from a scheduler or not.
* gst/schedulers/cothreads_compat.h:
* gst/schedulers/gthread-cothreads.h:
add COTHREADS_TYPE macro. Make do_cothread_set_func a macro so there
is no "unused" warning.
* gst/schedulers/Makefile.am:
* gst/schedulers/entryscheduler.c:
add new scheduler, based on ideas from talking to David and Martin.
It's supposed to be small and correct. Currently it's also slow (but
it's not noticable)
* examples/retag/retag.c: (main):
* testsuite/bytestream/test1.c: (main):
fix missing NULLs at end of variadic functions
* testsuite/elements/.cvsignore:
update
Original commit message from CVS:
2004-01-30 Laurent Vivier <Laurent.Vivier@bull.net>
reviewed by Benjamin Otte
parts of the patch submitted in bug #113913
* configure.ac:
use AC_C_INLINE. Use = instead of == with test
* examples/plugins/example.c:
* gst/autoplug/gstspideridentity.c:
* gst/elements/gstfdsrc.c:
* gst/elements/gstfilesrc.c:
* gst/elements/gstidentity.c:
* gst/elements/gstmultidisksrc.c:
* gst/elements/gststatistics.c:
* gst/gstelement.c:
* gst/gstobject.c:
* gst/gstpad.c:
* gst/gstpipeline.c:
* gst/gstthread.c:
don't end enums with a comma
* gst/gstindex.c: (gst_index_compare_func):
do explicit casting to gint
* gst/gsttrace.c: (gst_trace_text_flush):
#define strsize as a macro
Original commit message from CVS:
2004-01-18 Colin Walters <walters@verbum.org>
* examples/retag/retag.c: Call gst_init before processing
program args. Add g_assert to _link_many call.
Original commit message from CVS:
merge in tagging
Includes:
- gsttag.[ch] - The definition of GstTagList and tag registering/querying
- gsttaginterface.[ch] - Interface for elements that can handle setting of tags
- updates and merges to gststructure.[ch] and gstvalue.[ch]
- testsuite/tags - some tests for tagging
- bugfixes
- updates to make make distcheck work
- updates the version number to 0.7.2.1
Does not include:
- including tagging stuff in docs
- extensive tests
Original commit message from CVS:
s/GstBuffer/GstData/ in the API where you can pass events. Fix the plugins to deal with that. Fixes#113488. Also includes scheduler patches, and probably fixes some queue bugs relating to events and buffers.
Original commit message from CVS:
GST_DEBUG reorganization
This is a big diff (ca 450k), containing loads of stuff:
- gstinfo.[ch] complete rewrite
- changing of all GST_DEBUG messages to reflect that change
- reorganization of subsystem disabling
- addition of gstconfig.h.in so we can track the disablings
- <gst/gst.h> does not include <unistd.h> and <config.h> anymore
- documentation updated for gstinfo stuff (build the docs yourself to know what changed)
- bugfixes for making of the docs (files from CVS are not deleted anymore
- testsuite for debugging changes in testsuite/debug
expect breakage
