Commit graph

486 commits

Author SHA1 Message Date
Thiago Santos
2dbc9f86fc qtdemux: restore the segment on case of soft reset
When seeking back to restore the mdat position a flush is pushed
through and it resets downstream segment information. Make sure
that after the flush (that does a soft reset) a segment will
be pushed again

Fixes regressions spotted at
https://ci.gstreamer.net/job/GStreamer-master-validate/2100/
2015-11-24 10:57:28 -03:00
Luis de Bethencourt
53f8f1abae qtdemux: unite duplicate FourCC
Unite in fourcc.h the FourCCs that are used twice or more in qtdemux
2015-11-20 11:05:51 +00:00
Luis de Bethencourt
0fffb8f2e2 atoms: remove unused argument of build_mov_wave_extension()
AtomTrak * trak argument of build_move_wave_extension() isn't used.
Removing it.
2015-11-19 19:48:09 +00:00
Luis de Bethencourt
ca6d71ef2a qtdemux: remove duplicate FourCC
Use the available FourCCs in fourcc.h instead of duplicating them.
2015-11-19 19:28:25 +00:00
Luis de Bethencourt
ca46897bf7 isomp4: centralize all FourCC
10 FourCCs generated with GST_MAKE_FOURCC() in gstqtmux.c and atoms.c
already exist in fourcc.h. Don't duplicate these and use them directly.
Plus moving 6 to fourcc.h, to centralize them all.
2015-11-19 18:41:39 +00:00
Luis de Bethencourt
5ed8cba024 isomp4: add support for Opus in mp4mpux
Add support for muxing MP4 files containing Opus. Based on the spec
detailed here:
https://www.opus-codec.org/docs/opus_in_isobmff.html

https://bugzilla.gnome.org/show_bug.cgi?id=742643
2015-11-19 17:08:25 +00:00
Sebastian Dröge
cc119e6eb9 qtdemux: Replace tabs with spaces 2015-11-18 19:11:51 +02:00
Sebastian Dröge
b404b2239a qtdemux: Cast to signed integers to prevent unsigned compare between negative and positive numbers
This fixes seeking if the first entries in the samples table are negative. The
binary search would always fail on this as the array would not be sorted if
interpreting the negative numbers as huge positive numbers. This caused us to
always output buffers from the beginning after a seek instead of close to the
seek position.

Also add a case to the comparison function for equality.
2015-11-18 19:11:51 +02:00
Thiago Santos
8bcc733cec qtdemux: only send initial gaps for non-fragmented streams
It would be unusual to have the header segment with an 'edts' atom
indicating gaps at the beginning when handling fragmented streams.

The header usually doesn't contain any timestamping information, this
should come from the playlist/manifest and the segments with media
in those scenarios.

https://bugzilla.gnome.org/show_bug.cgi?id=758171
2015-11-17 09:42:07 -03:00
Thiago Santos
ef8cb05823 Revert "Revert "qtdemux: respect qt segments in push-mode for empty starts""
This reverts commit d842ff288a.

This was reverted by accident
2015-11-17 09:41:34 -03:00
Sebastian Dröge
d842ff288a Revert "qtdemux: respect qt segments in push-mode for empty starts"
This reverts commit 142d8e2d23.
2015-11-16 13:52:05 +02:00
Vineeth TM
0d4e3847f0 qtdemux: Fix string memory leak
The string got using g_strdup_printf will be allocated memory
and should be freed after use.

https://bugzilla.gnome.org/show_bug.cgi?id=758161
2015-11-16 10:22:16 +02:00
Reynaldo H. Verdejo Pinochet
48c4362cdc isomp4/atoms: remove unnecessary NULL checks before g_free() 2015-11-15 01:43:08 -08:00
Thiago Santos
142d8e2d23 qtdemux: respect qt segments in push-mode for empty starts
In push-mode it is hard to support qt segments overall but it is
possible to support when the file isn't heavily edited but just contain
a segment to indicate a gap at the beginning. This also allows properly
timestamping data that has negative DTS in push-mode.

It is relevant to support those for 2 scenarios:

1) fragmented streaming
2) HTTP playback of 'regular' mp4

https://bugzilla.gnome.org/show_bug.cgi?id=753484
2015-11-09 11:49:27 -03:00
Philippe Normand
9f0c22e891 qtdemux: support for cenc auxiliary info parsing outside of moof box
When the cenc aux info index is out of moof boundaries, keep track of
it and parse the beginning of the mdat box, before the first sample.

https://bugzilla.gnome.org/show_bug.cgi?id=755614
2015-11-04 15:29:10 +00:00
Ryan Hendrickson
fc203a4bd7 qtmux: Don't unconditionally use strnlen()
It's not available on older OSX and we can as well use memchr() here.

https://bugzilla.gnome.org/show_bug.cgi?id=756154
2015-10-19 15:37:34 +03:00
Tim-Philipp Müller
d238f080fb qtmux: unify raw audio caps into a single caps structure 2015-10-19 09:14:19 +01:00
Reynaldo H. Verdejo Pinochet
82bffe3eef qtdemux: add support for FFV1 coded streams in mov
https://bugzilla.gnome.org/show_bug.cgi?id=752495
2015-10-15 10:38:34 -07:00
Guillaume Desmottes
360a6509c7 qtdemux: fix caps leak
If the QtDemuxStream are re-used they may already have caps which used
to be leaked.

Reproduced using the
validate.dash.playback.seek_forward.dash_exMPD_BIP_TC1 validate
scenario.

https://bugzilla.gnome.org/show_bug.cgi?id=756561
2015-10-14 14:42:19 +03:00
Vineeth TM
8283337e73 qtdemux: Fix taglist memory leak
Free the stream and its sub items instead of just the stream

https://bugzilla.gnome.org/show_bug.cgi?id=756544
2015-10-14 10:22:19 +03:00
Thibault Saunier
ed079b9e74 qtmux: Allow negotiating to S8 as a raw format but stop making it best choice
Negotiation to audio/x-raw,format=S8 was not possible because S8 does
not have a bit order so we ended up doing `if (!entry.fourcc) goto refuse_caps;`

https://bugzilla.gnome.org/show_bug.cgi?id=756387
2015-10-13 21:24:10 +01:00
Thibault Saunier
6bfee34b93 qtmux: Add prores support
https://bugzilla.gnome.org/show_bug.cgi?id=756388
2015-10-13 21:24:10 +01:00
Vineeth TM
b26ce7ba6d qtdemux: Fix memory leak for corrupted file
Free brands before overriding them.

https://bugzilla.gnome.org/show_bug.cgi?id=756226
2015-10-08 15:03:36 +01:00
Vineeth TM
44008938bb qtmux: Fix date memory leak
When getting date from taglist, the memory should be freed after
using it.

https://bugzilla.gnome.org/show_bug.cgi?id=756171
2015-10-07 11:22:20 +01:00
Vineeth TM
d7a80be3c7 qtmux: Fix sample memory leak
When getting sample from taglist, the memory should be freed after
using it.

https://bugzilla.gnome.org/show_bug.cgi?id=756068
2015-10-05 12:09:26 +01:00
Thiago Santos
df0a31b4ee qtdemux: handle empty segments in seeking adjust
If seeking targets an empty segment skip it as there is no media
offset to get from it. Instead look for the next one.

This doesn't make seeking in push-mode work if you seek to an
empty segment but at least won't get you to wrong offsets.

https://bugzilla.gnome.org/show_bug.cgi?id=753484
2015-10-02 19:23:43 +01:00
Manasa Athreya
e6a4c81af5 qtdemux: Check multi trex to find track id in mp4 mpeg-dash stream
If stream has more than one trex box which is not matched to actual
track id, it makes qtdemux crashed.

Author : Manasa Athreya (manasa.athreya@lge.com)

https://bugzilla.gnome.org/show_bug.cgi?id=754864
2015-10-02 17:38:57 +03:00
Chris Bass
563ffc0d8f qtdemux: support timed-text subtitle tracks.
https://bugzilla.gnome.org/show_bug.cgi?id=752818
2015-09-26 00:51:42 +02:00
Sebastian Dröge
d7a0fd82c0 qtdemux: Accumulate segments for edit lists before activating the next segment
eceb2ccc73 broke segment seeks by always
accumulating segments manually when activating a segment. This is only
needed when handling edit lists, not when activating a segment because of a
seek. Do the accumulation when switching edit list segments instead.

This fixes segment seeks again, while keeping edit lists playback working.

https://bugzilla.gnome.org/show_bug.cgi?id=755471
2015-09-24 09:33:33 +02:00
Alex Ashley
5d99d0dfa0 qtdemux: fix offset calculation when parsing CENC aux info
Commit 7d7e54ce68 added support for
DASH common encryption, however commit
bb336840c0 that went onto master
shortly before the CENC commit caused the calculation of the CENC
aux info offset to be incorrect.

The base_offset was being added if present, but if the base_offset
is relative to the start of the moof, the offset was being added twice.
The correct approach is to calculate the offset from the start of the
moof and use that offset when parsing the CENC aux info.
2015-08-18 11:48:03 +01:00
Sebastian Dröge
e9aa4c7467 qtdemux: Use signed integer type to be able to check for negative subtraction results
CID 1315829
2015-08-16 13:04:02 +02:00
Thiago Santos
41a4b68390 qtdemux: only look for more samples in moofs in pull-mode
For playback of some fragmented formats with qtdemux it will
try to look for the next moof after finishing one but it is only
possible for pull-mode. For playback of streaming fragmented formats
such as DASH it should just not try to look for another moof but
instead wait for more data.

https://bugzilla.gnome.org/show_bug.cgi?id=752602

https://bugzilla.gnome.org/show_bug.cgi?id=752603
2015-08-15 11:06:02 -03:00
Thiago Santos
288b0bbb38 qtdemux: fix small typo in comment 2015-08-10 19:11:17 -03:00
Tim-Philipp Müller
604cc2a548 qtdemux: fix suboptimal queue iteration code 2015-08-10 12:45:50 +01:00
Tim-Philipp Müller
0fbf5f3d9e qtdemux: don't use glib 2.44-only API 2015-08-10 12:32:23 +01:00
Alex Ashley
7d7e54ce68 qtdemux: add support for ISOBMFF Common Encryption
This commit adds support for ISOBMFF Common Encryption (cenc), as
defined in ISO/IEC 23001-7. It uses a GstProtection event to
pass the contents of PSSH boxes to downstream decryptor elements
and attached GstProtectionMeta to each sample.

https://bugzilla.gnome.org/show_bug.cgi?id=705991
2015-08-10 12:32:17 +01:00
Thiago Santos
e0878d6325 qtdemux: store the moof-offset also for push mode
It will be used in some cases for getting the correct offsets
from trun atoms.

https://bugzilla.gnome.org/show_bug.cgi?id=752603
2015-08-05 18:12:45 -03:00
Thiago Santos
bb336840c0 qtdemux: handle default-base-is-moof flag
Handle the flag from the tfhd that signals the base offset to
start from the moof atom

https://bugzilla.gnome.org/show_bug.cgi?id=752603
2015-08-05 18:12:45 -03:00
Manasa Athreya
e6381ef285 qtdemux: fix 16-bit PCM audio advertised with 'raw ' fourcc
'NONE' and 'raw ' fourcc don't always contain U8 audio, it can
be more bits as well, in which case it's just like 'twos'.

https://bugzilla.gnome.org/show_bug.cgi?id=752613
2015-07-27 19:06:43 +01:00
Paul Hyunil
3740e69957 qtdemux: Support subtitle when track subtype is fourcc_subt
https://bugzilla.gnome.org/show_bug.cgi?id=752655
2015-07-21 12:24:15 +01:00
Thiago Santos
30b3aa3030 qtdemux: rework segment event handling for adaptive streaming
When a new time segment is received upstream is going to restart
with a new atom. Make the neededbytes and todrop variables
reflect that to avoid waiting too much or dropping the
initial bytes that contain the header.
2015-07-08 23:23:53 -03:00
Thiago Santos
38520a1e12 qtdemux: push data from adapter before starting new segment
The adapter might have data remaining from the previous segment,
push it all before clearing the adapter and starting a new segment.

It can accumulate data if it had pushed and got not-linked, returning
immediately without processing all the data. Before starting a new
segment this data should be handled.
2015-07-08 23:23:53 -03:00
Thiago Santos
ee7ddf6c67 qtdemux: flush samples before adding more from moof
Avoids accumulating all samples from a fragmented stream that could
lead to a 'index-too-big' error once it goes over 50MB of data. It
could reach that before 2h of playback so it doesn't take that long.

As upstream elements are providing data in time format they should
be the ones that have more information about the full media index
and should be able to seek if possible.
2015-07-08 11:53:44 -03:00
Thiago Santos
6ee4b31c0e qtdemux: rename upstream_newsegment to upstream_format_is_time
upstream_newsegment isn't really clear on what it means, it is set
to TRUE when the upstream element sends a segment in TIME format, so
rename it to be more clear about it.

It is important to know this because it means that upstream has
a notion of time and qtdemux is likely being driven by an upstream
element that is reading from a higher level abstraction than a file,
such as a DASH, MSS or DLNA element.
2015-07-08 11:53:44 -03:00
Thiago Santos
5994b30257 qtdemux: fix leak by flushing previous sample info from trak
In fragmented streaming, multiple moov/moof will be parsed and their
previously stored samples array might leak when new values are parsed.
The parse_trak and callees won't free the previously stored values
before parsing the new ones.

In step-by-step, this is what happens:

1) initial moov is parsed, traks as well, streams are created. The
   trak doesn't contain samples because they are in the moof's trun
   boxes. n_samples is set to 0 while parsing the trak and the samples
   array is still NULL.
2) moofs are parsed, and their trun boxes will increase n_samples and
   create/extend the samples array
3) At some point a new moov might be sent (bitrate switching, for example)
   and parsing the trak will overwrite n_samples with the values from
   this trak. If the n_samples is set to 0 qtdemux will assume that
   the samples array is NULL and will leak it when a new one is
   created for the subsequent moofs.

This patch makes qtdemux properly free previous sample data before
creating new ones and adds an assert to catch future occurrences of
this issue when the code changes.
2015-07-08 11:53:44 -03:00
Thiago Santos
63f35eeb12 qtdemux: fix index size check and debug message
It is allocating samples_count + n_samples, not only n_samples
2015-07-08 11:53:44 -03:00
Stefan Sauer
12930c2f8c docs: fix "Symbol name not found at the start of the comment block"
Add symbols or change comment into a regular comment.
2015-07-07 17:12:02 +02:00
Thiago Santos
f40c1f8b09 qtdemux: avoid looping reading the 'moof' atom forever
It gets stuck if it only finds a moof and no mfra/mfro or moov
atoms. Skip the moof to continue the parsing to have it either
play or error out.

https://bugzilla.gnome.org/show_bug.cgi?id=745089
2015-07-06 11:00:20 -03:00
Gilbok Lee
0dcd76447a qtdemux: does not detect orientation
Most files don't contain the values for transposing the coordinates
back to the positive quadrant so qtdemux was ignoring the rotation
tag. To be able to properly handle those files qtdemux will also ignore
the transposing values to only detect the rotation using the values
abde from the transformation matrix:

[a b c]
[d e f]
[g h i]

https://bugzilla.gnome.org/show_bug.cgi?id=738681
2015-06-25 00:24:21 -03:00
Nicolas Dufresne
2359ee29e8 qtmux: Correctly calculate the elst media start
The media start has nothing to do with the shift we have applied
but with the value of the first PTS. This is defined as:

  Dt(0) = 0
  Ct(0) = Dt(0) + CTTS(0)

So the media start is always the first CTTS.

https://bugzilla.gnome.org/show_bug.cgi?id=751361
2015-06-23 22:34:36 -04:00