The test_record case was working because async=false had
been added in https://bugzilla.gnome.org/show_bug.cgi?id=757488
but that was incorrect, as it should not be needed.
Removing async=false made the test fail as expected, this is
fixed by not trying to preroll when preparing the media for
RECORD, as start_prepare is called upon receiving ANNOUNCE,
and our peer will not start sending media until it has received
a response to that request, and sent and received a response
to RECORD as well, thus obviously preventing preroll.
https://bugzilla.gnome.org/show_bug.cgi?id=793738
...and replace all checks for RECORD in GstRTSPMedia which are really
for "sender-only". This way the code becomes more generic and introducing
support for onvif-backchannel later on will require no changes in
GstRTSPMedia.
SDP are now provided *before* the pipeline is fully complete. In order
to know whether a media is seekable or not therefore requires asking
the invididual streams.
API: gst_rtsp_stream_seekable
https://bugzilla.gnome.org/show_bug.cgi?id=790674
There is not need of adding fakesink elements to the media
pipeline in the dynamic-payloader case.
The media pipeline itself is dynamically updated with
the receiver and sender parts that are based on the client
transport information known after SETUP has been received.
Change-Id: I4e88c9b500c04030669822f0d03b1842913f6cb9
https://bugzilla.gnome.org/show_bug.cgi?id=790674
Media is complete when all the transport based parts are
added to the media pipeline. At this point ASYNC_DONE is
posted by the media pipeline and media is ready to enter
the PREPARED state.
Change-Id: I50fb8dfed88ebaf057d9a35fca2d7f0a70e9d1fa
https://bugzilla.gnome.org/show_bug.cgi?id=790674
If we still have some dynamic paylaoders which haven't posted
no-more-pads yet, don't go to PREPARED if one of the streams
blocked.
The risk was that we would end up not exposing/using all specified
streams.
The downside is that if you have _multiple_ _live_ _dynamic_ payloaders
then it will take a bit more time to start. But only if those 3
conditions are present.
https://bugzilla.gnome.org/show_bug.cgi?id=769521
If we have more than one dynamic payloader in the pipeline, we need
to wait until the *last* one emits 'no-more-pads' before switching
to PREPARED.
Failure to do so would result in a race where some of the streams
wouldn't properly be prepared
https://bugzilla.gnome.org/show_bug.cgi?id=769521
The initial pipeline does not contain specific transport
elements. The receiver and the sender parts are added
after PLAY.
If the media is shared, the streams are dynamically
reconfigured after each PLAY.
https://bugzilla.gnome.org/show_bug.cgi?id=788340
This adds basic support for new 2.0 features, though the protocol is
subposdely backward incompatible, most semantics are the sames.
This commit adds:
- features:
* version negotiation
* pipelined requests support
* Media-Properties support
* Accept-Ranges support
- APIs:
* gst_rtsp_media_seekable
The RTSP methods that have been removed when using 2.0 now return
BAD_REQUEST.
https://bugzilla.gnome.org/show_bug.cgi?id=781446
For NTP and PTP clocks we signal the actual clock that is used and signal
the direct media clock offset.
For all other clocks we at least signal that it's the local sender clock.
This allows receivers to know which clock was used to generate the media and
its RTP timestamps. Receivers can then implement network synchronization,
either absolute or at least relative by getting the sender clock rate directly
via NTP/PTP instead of estimating it from RTP timestamps and packet receive
times.
https://bugzilla.gnome.org/show_bug.cgi?id=760005
Deferred calls to start_prepare() can be deferred past the point until
which wait_preroll() and by proxy gst_rtsp_media_get_status() is
prepared to wait. Previously there was no lock and no check for this
situation. This meant that a media could be prepared and unprepared
simultaneously by two different threads. Now a lock is in place and a
suitable check is done.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=759773
Without TEARDOWN it might be desireable to keep the media running and continue
sending data to the client, even if the RTSP connection itself is
disconnected.
Only do this for session medias that have only UDP transports. If there's at
least on TCP transport, it will stop working and cause problems when the
connection is disconnected.
https://bugzilla.gnome.org/show_bug.cgi?id=758999
default_prepare() takes a transfer-none reference GstRTSPMedia object.
Later on a g_idle_source_new() is created and a pointer to the media
object is passed as user data. If the media is freed before the idle
source is dispatched the media object pointer is invalid, but the idle
source callback expects it to still be valid. To fix this a reference to
the media object is taken when registering the source callback function
and a corresponding release of the reference is done when the souce is
destroyed.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=755748
In parse_keymgmt(), don't mutate the input string that's been passed
as const, especially since we might need the original value again if
the same key info applies to multiple streams (RTX, for example).
https://bugzilla.gnome.org/show_bug.cgi?id=754753
Add gst_rtsp_stream_(get|set)_buffer_size and use it to configure the
UDP TX buffer size.
Incorporates a patch by Hyunjun Ko <zzoon.ko@samsung.com>
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=749095
The intention is to prevent going PLAYING state before pads are created.
If there was mutilple dynamic payload, it would leak few fakesink and
actually prevent from ever reaching playing state.
https://bugzilla.gnome.org/show_bug.cgi?id=753385
In media to caps function, reserved_keys array is being used for variable i,
leading to GLib-CRITICAL **: g_ascii_strcasecmp: assertion 's1 != NULL' failed
changed it to variable j
https://bugzilla.gnome.org/show_bug.cgi?id=753009
Skip keys from the fmtp, which we already use ourselves for the
caps. Some software is adding random things like clock-rate into
the fmtp, and we would otherwise here set a string-typed clock-rate
in the caps... and thus fail to create valid RTP caps
https://bugzilla.gnome.org/show_bug.cgi?id=753009
A bin that contains the real payloader might be used as payloader. In this
case we have to get the real payloader for the various properties it provides.
Example use cases for this are bins that payload some media and then have
additional elements that add metadata or RTP extension headers to the stream.
https://bugzilla.gnome.org/show_bug.cgi?id=750800
Because of duplicated g_signal_connect for request-aux-sender signal,
wrong stream pointer is passed to the signal handler.
Instead of passing each stream, pass stream array and get the relevant stream.
https://bugzilla.gnome.org/show_bug.cgi?id=747839
When the sdp media attribute framesize are converted to caps
the <payload> should not be included.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=725335
Based on the patch for rtspsrc by Linus Svensson <linussn@axis.com>
If the media was just not seekable, we continue from whatever position we are
and let the client decide if that is what is wanted or not.
Only if the actual seek failed, we can't really recover and should error out.
Fix the logic of gst_rtsp_media_collect_streams() so after looping collecting
all streams it knows if it got any, and can check if the transport mode is OK.
CID #1268400
Just print a warning if the one that was set before disagrees with what
elements we found. It must already be set to something before as this
function is called after we received the SDP from ANNOUNCE in RECORD mode,
and we would reject ANNOUNCE if the RECORD flag was not set.
The sequence number is not monotonic for RTP packets after pause. The
reason is basepayloader generates a randon sequence number when the
pipeline goes from ready to pause. With this fix generation of sequence
number will be monotonic when going from pause to play request.
https://bugzilla.gnome.org/show_bug.cgi?id=736017
The RTCP parts, in specific the RTCP udpsinks, are not flushed when
seeking and will always continue counting the time. This leads to
the NPT after a backwards seek to be something completely different
to the actual seek position.
https://bugzilla.gnome.org/show_bug.cgi?id=732644
When we have too many messages queued for a client (currently hardcoded
to 100) we overflow and drop the messages. Add a drop-backlog property
to control this behaviour. Setting this property to FALSE will retry
to send the messages to the client by waiting for more room in the
backlog.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=725898
Set our state to UNPREPARING and release the state-lock before
setting the pipeline to the NULL state. This way, any pad-added
callback will be able to take the state-lock and check that we are now
unpreparing instead of deadlocking.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=727102
If client supplied a range check if the range specifies the start point.
If not, then do an accurate seek to the current position. If a start
point was specified do do a key unit seek to make sure the streaming
starts with decodeable frames.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=724611
in gst_rtsp_media_prepare() the thread is not used if media is already
prepared (e.g. media shared) so we want to stop the thread. otherwise, a
leak occurs.
https://bugzilla.gnome.org/show_bug.cgi?id=724182
Only set the keyframe flag when we modify the start position. The
keyframe flag should probably be ignored when no change is requested but
until we can claim this is all documented properly and all demuxer
implement this, avoid setting the flag.
See also https://bugzilla.gnome.org/show_bug.cgi?id=723075
Add support for different suspend modes. The stream is suspended right after
producing the SDP and after PAUSE. Different suspend modes are available that
affect the state of the pipeline. NONE leaves the pipeline state unchanged and
is the current and old behaviour, PAUSE will set the pipeline to the PAUSED
state and RESET will bring the pipeline to the NULL state.
A stream is also unsuspended when it goes back to PLAYING, for RESET streams,
this means that the pipeline needs to be prerolled again.
Base on patches by Ognyan Tonchev <ognyan@axis.com>
See https://bugzilla.gnome.org/show_bug.cgi?id=711257
Start live streams in the blocked state and make them preroll using the
messages. This ensure that no data is played by the sink until we explicitly
unblock the stream right before going to PLAYING.
See https://bugzilla.gnome.org/show_bug.cgi?id=711257
