Link after doing the state change and unlink before shutting down. Makes the
window for causing races in toggling the visualisations smaller.
See #576187.
Remove the group GCond that we used for waiting for groups to finish because we
use pad blocking on the selectors and counters instead for waiting for the
groups to complete.
remove the obsolete about_to_finish variable set while emiting the
about-to-finish signal and fix some old comments.
We don't need to take the playbin lock when querying the uridecodebin.
When we make a group connected to a demuxer, keep an extra dynamic refcount for
the group which is only decremented when no_more_pads or a multiqueue overrun is
detected. This way we avoid a race between exposing the group while more dynamic
refs are added from new pads.
Fixes#575588.
Sync the state of the newly added chains to the state of the parent sink element
to avoid lost async-start messages. Fixes cdda:// async-done message storm.
When streams are not selected in the selector, return NOT_LINKED so that
upstream elements can skip decoding. Only do this for audio and video pads
because for text streams the overhead is smaller and they could come from
external files.
Set the custom sink async=FALSE to not make it participate in preroll because we
are dealing with sparse streams.
Try to set sync=TRUE on the custom text sink.
Release the shutdown lock when we wait for other groups to complete or else we
have a deadlock when the other group completes and tries to grab the shutdown
lock.
Fixes#575550.
The flac frame header typefinder overstates the likelihood of a match, leading
to false positives with e.g. aac streams and PDF files. Reduce probabilty
returned from LIKELY to POSSIBLE for the frame header matchin code.
Fixes#574939.
Detect more variations and also bail out in more cases where the values
don't make sense. Furthermore, add width/height and bpp to the caps,
because we can.
Add property to playbin2 to configure a custom sink that receives the raw
subtitle buffers instead of using a textoverlay.
Improve the property finding code to make it more usable.
Use property find code to find async properties in custom sinks that are bins.
Improve text overlay code to gracefully handle missing elements.
Use scan context for initial peek as well. Peek 6 bytes in the initial
peek rather than 5 bytes, to match the length of the memcmp we're doing
on that data later. Return immediately when we found caps from looking
at the beginning of the data - no point in continuing to scan the next
64kB for something matching a frame header.
Disconnect the notify::caps signal in our callback (it'll be re-added
if we're not, in fact, finished getting complete caps). Ensures that
caps changes mid-stream (e.g. from an mp3 that changes from
stereo->mono mid-file) don't cause us to try to add a new pad.
Make it possible to request a flushing pad from the playsink. We can eventually
use these flushing pads to quickly terminate the dataflow when we are shutting
down.
Release the group lock while we perform the state changes on the uridecodebins
because that might trigger callbacks that we need to handle with the group lock
taken. Avoids a possible deadly embrace in some id3/flac files.
Fixes#567396.
When setting the quality/filter-length while PLAYING the
resampling context will be destroyed and created again in
some cases, which will cause crashes in the transform function
if it's called at that time.
Rather than only checking for volume property on the audio sink
directly, recursively look for it on sinks within it (if it's a bin).
Allows use of sink-as-volume-control where the application has supplied
an audio-sink bin that includes a real audio sink internally.
Don't keep extra references to volume and mute elements; we don't need
to do so.
Ensure we unref pads that we have references to, and release request
pads.
Because core now supports typefindfactories without a typefind function we can
register a factory fo GSM that will --if all else fails-- assume the file is a
GSM file based on the registered extension.
Fixes#566661.
We can use gst_element_link_pads() instead of the more generic
gst_element_link() function because we know the pads. This saves some cycles
because the more generic function needs to search for possible compatible caps
etc.
Original commit message from CVS:
* gst/playback/gstplaybin2.c: (gst_play_bin_class_init),
(gst_play_bin_set_uri), (gst_play_bin_set_suburi),
(no_more_pads_cb), (drained_cb), (group_set_locked_state_unlocked),
(activate_group), (deactivate_group), (groups_set_locked_state),
(gst_play_bin_change_state):
Fix some comments and docs.
Post an error message when we fail to link the selector to the sink.
Remove pushing of EOS, this seems unneeded.
Lock the state of deactivated groups so that they don't accidentally
reactivate when the playbin2 state changes.
Reuse uridecodebins.
Unlock and relock state of groups when playbin goes to NULL.
Fixes#566654.
Fixes#566341.
* gst/playback/gsturidecodebin.c: (pad_removed_cb), (type_found):
Only do something in the pad removed callback when we are dealing with
our sourcepads because the sinkpads don't have a ghostpad.
Original commit message from CVS:
* gst/playback/gstplaybin2.c: (notify_source_cb), (activate_group):
Disconnect signal handlers before destroying a previous decodebin so
that we don't end up causing deadlocks. Fixes#566586.
Original commit message from CVS:
* gst/audiotestsrc/gstaudiotestsrc.c:
(gst_audio_test_src_class_init), (gst_audio_test_src_init),
(gst_audio_test_src_check_get_range),
(gst_audio_test_src_set_property),
(gst_audio_test_src_get_property):
* gst/audiotestsrc/gstaudiotestsrc.h:
Add property to control pull/push based scheduling.
Original commit message from CVS:
* gst/playback/gstplaybin2.c: (no_more_pads_cb):
Add some debug info.
* gst/playback/gstplaysink.c: (gen_video_chain), (gen_audio_chain),
(gst_play_sink_reconfigure), (gst_play_sink_request_pad),
(gst_play_sink_release_pad):
Add some more debug info.
Reconfigure the audio chain when we switch between raw and encoded audio
in gapless playback.
Original commit message from CVS:
* gst/adder/Makefile.am:
* gst/adder/gstadder.c:
Cleanup variable names to make the adder-loop easier to understand.
Also try to use liboil to spee it up, but ifdef it out as it does not
make any change for me (Intel pentim M (sse,sse2) please try on other
systems).
Original commit message from CVS:
* docs/plugins/Makefile.am:
* docs/plugins/gst-plugins-base-plugins-docs.sgml:
* docs/plugins/gst-plugins-base-plugins-sections.txt:
* gst/tcp/gsttcpclientsink.c:
* gst/tcp/gsttcpclientsrc.c:
* gst/tcp/gsttcpserversrc.c:
Add minimal docs to make the remaining tcp elements show up.
Fixes#564139.
Original commit message from CVS:
* gst/playback/gsturidecodebin.c: (gst_uri_decode_bin_finalize):
Free the factory array when finalizing.
* sys/v4l/gstv4lsrc.c: (gst_v4lsrc_base_init):
Use a GstStaticPadTemplate since the src pad caps are fixed.
Original commit message from CVS:
* gst/subparse/samiparse.c: (sami_context_push_state),
(sami_context_pop_state), (start_sami_element), (end_sami_element):
Some versions of libxml seem to be very picky as to strict formatting
of the input and never 'close' the final </body> tag.
In order to fix that bad behaviour, we trigger the flushing of
remaining data on both </body> and </sami>.
Fixes#557365
Original commit message from CVS:
Patch by: Guillaume Emont <guillaume at fluendo dot com>
* gst/typefind/gsttypefindfunctions.c: (plugin_init):
Add typefinders for MS Word files and OS X .DS_Store files to
prevent them to be recognized as MPEG files. Fixes bug #564098.
Original commit message from CVS:
* gst/playback/gstplaysink.c: (gen_audio_chain),
(gst_play_sink_reconfigure):
Add some more debug info.
Fix linking of just an encoded sink.
Handle failure to create a sink chain more gracefully than crashing.
Original commit message from CVS:
* gst/playback/gstplaybin2.c: (pad_added_cb):
Error out with a missing-plugin error when the input-selector was not
found.
* gst/playback/gstplaysink.c: (gst_play_sink_reconfigure):
Indentation.
Original commit message from CVS:
* gst/playback/gstplaysink.c: (gst_play_sink_class_init),
(gst_play_sink_dispose), (gst_play_sink_finalize), (try_element),
(gen_video_chain), (gen_audio_chain), (gst_play_sink_reconfigure),
(gst_play_sink_send_event), (gst_play_sink_change_state):
Use G_DEFINE_TYPE.
Try to set the selected sink to READY before using it. This will allow
for detection of incompatible formats sooner.
Don't cause a fatal error when conversion elements are missing but post
a missing-element message and a warning instead because things might
still link and run fine.
Simplyfy the construction of audio and video sink chains.
Original commit message from CVS:
Patch by: Luis Menina <liberforce at freeside dot fr>
* gst-libs/gst/floatcast/floatcast.h:
* gst/typefind/gsttypefindfunctions.c:
Include glib.h instead of a specific GLib header. Including single
GLib headers is deprecated. Fixes bug #563904.
Original commit message from CVS:
* gst/volume/gstvolume.c: (gst_volume_class_init),
(volume_before_transform), (volume_transform_ip):
Use new basetransform vmethod to reconfigure the dynamic properties and
any pending volume/mute changes. Fixes#563508.
Original commit message from CVS:
* gst/playback/gstdecodebin.c:
* gst/playback/gstdecodebin2.c:
Add basic docs to decodebin and link to decodebin from decodebin2.
Original commit message from CVS:
* docs/plugins/gst-plugins-base-plugins.args:
* docs/plugins/gst-plugins-base-plugins.hierarchy:
* docs/plugins/gst-plugins-base-plugins.interfaces:
* docs/plugins/gst-plugins-base-plugins.prerequisites:
* docs/plugins/inspect/plugin-videorate.xml:
* gst/speexresample/gstspeexresample.c:
Update documentation of speexresample for the new element name.
Original commit message from CVS:
* gst/speexresample/gstspeexresample.c: (plugin_init):
Update the debug category from speex_resample to audioresample.
Original commit message from CVS:
* gst/playback/gstplaybin2.c:
Add notification of current stream. Add ability to configure buffer
sizes.
* gst/playback/gsturidecodebin.c:
Add ability to configure buffer sizes for streaming mode.
Bug #561734.
Original commit message from CVS:
* gst/playback/gstplaysink.c: (gen_audio_chain):
Don't post an error when we can't configure the volume but post a
warning instead. Fixes#561780.
Original commit message from CVS:
Patch by: Jonathan Rosser <jonathan.rosser@rd.bbc.co.uk>
* gst/videotestsrc/gstvideotestsrc.c:
* gst/videotestsrc/gstvideotestsrc.h:
* gst/videotestsrc/videotestsrc.c:
* gst/videotestsrc/videotestsrc.h:
Add a zone plate pattern generator based on BBC R&D Report
1978/23 (yeah *that* 1978). Try 'videotestsrc pattern=zone-plate
kx2=20 ky2=20 kt=1'.
Original commit message from CVS:
* gst/speexresample/gstspeexresample.c:
(gst_speex_resample_class_init), (gst_speex_resample_set_property),
(gst_speex_resample_get_property):
Add a "filter-length" property that maps to the quality values
for compatibilty with audioresample.
Original commit message from CVS:
* gst/playback/gstdecodebin2.c:
If the top-level type of the stream is plain text, don't try to decode
it, matching behaviour of decodebin.
* gst/playback/gstplaysink.c:
If we fail to generate a text chain (e.g. due to missing optional
plugins), don't crash.
Original commit message from CVS:
* gst/videotestsrc/gstvideotestsrc.c:
* gst/videotestsrc/gstvideotestsrc.h:
* gst/videotestsrc/videotestsrc.c:
* gst/videotestsrc/videotestsrc.h:
Add "colorspec" property, specifying whether to generate BT.601
or BT.709 video. This only affects YCbCr values, not RGB, since
if you're generating a 709 test pattern, presumably you want
709 RGB primaries, not 601. Also add "smpte75" pattern, which
uses 75% colors instead of 100%, since this is often more useful
for testing (and also follows the SMPTE EG-1 guideline).
Original commit message from CVS:
* gst/audioresample/gstaudioresample.c:
Guard against a NULL dereference I somehow encountered -
with a FLUSH_STOP arriving either before basetransform _start(),
or after _stop().
* gst/typefind/gsttypefindfunctions.c:
Make sure we never jump backwards when typefinding corrupt mov files.
Original commit message from CVS:
* gst/typefind/gsttypefindfunctions.c: (jp2_type_find),
(plugin_init):
Improve typefinding of ISO JPEG2000 mime types.
Original commit message from CVS:
* gst/playback/gstplaybin2.c: (deactivate_group):
don't try to unlink the selector sinkpad when we don't have it yet. This
can happen if an error occured before the group was complete.
Original commit message from CVS:
* gst/playback/gstplaybin2.c: (activate_group):
Catch state change errors and stop from the uridecodebin elements
instead of trying to continue in vain.
Original commit message from CVS:
* gst/playback/gstplaysink.c: (gst_play_sink_reconfigure):
Don't try to do crazy things when we only have a text pad without a
video pad. Fixes#559478.
Original commit message from CVS:
* gst/volume/gstvolume.c: (volume_update_real_volume),
(gst_volume_set_volume), (gst_volume_get_volume),
(gst_volume_set_mute), (gst_volume_init), (volume_setup),
(volume_transform_ip), (volume_update_mute),
(volume_update_volume), (volume_get_property):
* gst/volume/gstvolume.h:
Keep negotiated state in a separate variable.
Protect the volume and mute properties with the object lock.
Protect modifying the transform with the transform lock.
Original commit message from CVS:
* gst/ffmpegcolorspace/gstffmpegcodecmap.c:
(gst_ffmpeg_pixfmt_to_caps):
Only convert caps to string when debug is enabled.
Original commit message from CVS:
* gst/speexresample/gstspeexresample.c:
(gst_speex_resample_convert_buffer):
Add TODO at the top of the file for enabling SSE/ARM specific
optimizations and choosing the fastest implementation at runtime.
Add g_assert_not_reached() at two places that should really never
be reached.
Original commit message from CVS:
* gst/speexresample/gstspeexresample.c:
(gst_speex_resample_check_discont):
Fix format string and arguments.
* gst/speexresample/resample_sse.h:
Add missing file.
Original commit message from CVS:
* gst/speexresample/Makefile.am:
* gst/speexresample/gstspeexresample.c:
(gst_speex_resample_base_init), (gst_speex_resample_get_funcs),
(gst_speex_resample_convert_buffer), (_benchmark_int_float),
(_benchmark_int_int), (_benchmark_integer_resampling),
(plugin_init):
* gst/speexresample/gstspeexresample.h:
* gst/speexresample/resample.c:
* gst/speexresample/speex_resampler_double.c:
* gst/speexresample/speex_resampler_float.c:
* gst/speexresample/speex_resampler_int.c:
* gst/speexresample/speex_resampler_wrapper.h:
Add missing headers to Makefile.am.
Update copyright, years and my mail address.
Benchmark the integer resampling implementation against the
float implementation and use the faster one for 8/16 bit integer
input. On most recent systems the floating point version is faster.
Original commit message from CVS:
* gst/speexresample/gstspeexresample.c:
(gst_speex_resample_convert_buffer):
The length for the buffer conversion function is the number of
audio frames, i.e. we need to multiply it by the number of channels
to get the number of values. Also spotted by the unit test after
running in valgrind.
Original commit message from CVS:
* tests/check/elements/speexresample.c: (element_message_cb),
(eos_message_cb), (test_pipeline), (GST_START_TEST),
(speexresample_suite):
Add pipeline unit tests for testing all supported formats with
up/downsampling and different in/outrates.
* gst/speexresample/gstspeexresample.c:
(gst_speex_resample_push_drain), (gst_speex_resample_process):
* gst/speexresample/speex_resampler_wrapper.h:
Fix bugs identified by the testsuite.
Original commit message from CVS:
* gst/speexresample/gstspeexresample.c: (gst_speex_resample_stop),
(gst_speex_resample_get_funcs),
(gst_speex_resample_transform_size),
(gst_speex_resample_convert_buffer),
(gst_speex_resample_push_drain), (gst_speex_resample_process):
* gst/speexresample/gstspeexresample.h:
* gst/speexresample/speex_resampler_wrapper.h:
Add support for int8, int24 and int32 input by converting internally
to/from int16 or double.
Original commit message from CVS:
* gst/speexresample/gstspeexresample.c: (gst_speex_resample_start),
(gst_speex_resample_get_unit_size),
(gst_speex_resample_push_drain), (gst_speex_resample_event),
(gst_speex_resample_check_discont), (gst_speex_resample_process),
(gst_speex_resample_transform):
* gst/speexresample/gstspeexresample.h:
Rewrite timestamp tracking to make it more robust and guarantee
a continous stream.
* tests/check/Makefile.am:
* tests/check/elements/speexresample.c: (setup_speexresample),
(cleanup_speexresample), (fail_unless_perfect_stream),
(test_perfect_stream_instance), (GST_START_TEST),
(test_discont_stream_instance), (live_switch_alloc_only_48000),
(live_switch_get_sink_caps), (live_switch_push),
(speexresample_suite):
Add unit tests for speexresample based on the audioresample unit tests.
Original commit message from CVS:
* gst/speexresample/gstspeexresample.c:
(gst_speex_resample_class_init), (gst_speex_resample_fixate_caps),
(gst_speex_resample_process):
Fixate to the nearest supported rate instead of the first one.
Original commit message from CVS:
* gst/audioresample/gstaudioresample.c:
(gst_audioresample_class_init), (audioresample_fixate_caps):
Fixate the rate to the nearest supported rate instead of
the first one. Fixes bug #549510.
Original commit message from CVS:
* gst/typefind/gsttypefindfunctions.c: (mxf_type_find):
Improve MXF typefinding a bit by searching for a header partition
pack instead of just a general partition pack and checking more
bytes for valid values.
Original commit message from CVS:
* gst/audiotestsrc/gstaudiotestsrc.c: (gst_audio_test_src_init):
Set the default blocksize to -1 because we will then use the configured
samplesperbuffer to create our output buffer.
Original commit message from CVS:
* gst/typefind/gsttypefindfunctions.c: (flac_type_find):
Don't forget to advance the offset of what we're matching against, else
we end up in a forever loop.
Original commit message from CVS:
* gst/subparse/gstsubparse.c: (gst_subparse_type_find):
Improve typefinding a bit. If we don't have a Unicode charset
try GST_SUBTITLE_ENCODING and otherwise try ISO-8859-15.
Original commit message from CVS:
* gst/subparse/Makefile.am:
* gst/subparse/gstsubparse.c: (gst_sub_parse_dispose),
(gst_sub_parse_class_init), (gst_sub_parse_init),
(gst_convert_to_utf8), (detect_encoding), (convert_encoding),
(get_next_line), (gst_sub_parse_data_format_autodetect),
(feed_textbuf), (handle_buffer), (gst_sub_parse_change_state),
(gst_subparse_type_find):
* gst/subparse/gstsubparse.h:
Add support for UTF16/UTF32 subtitles as long as the first bytes of
the first buffer contain the BOM. This also adds support for other
encodings that allow NUL bytes via the encoding property.
Fixes bugs #552237 and #456788.
Original commit message from CVS:
* gst/typefind/gsttypefindfunctions.c: (flac_type_find):
For looking at the 4th byte we have to get 4 bytes of course
and not 3.
Original commit message from CVS:
* gst/typefind/gsttypefindfunctions.c: (flac_type_find):
Improve FLAC-without-headers typefinding by looking at most of the
frame header and checking if invalid values are used. Should prevent
quite some false positives compared to the old version which only
check if the first 14 bits are set.
Original commit message from CVS:
* gst/subparse/gstsubparse.c:
(gst_sub_parse_data_format_autodetect), (handle_buffer),
(gst_sub_parse_change_state):
* gst/subparse/gstsubparse.h:
* tests/check/elements/subparse.c: (GST_START_TEST):
Add support for subtitle files with UTF-8 BOM at the beginning
by simple stripping it from the first line before passing it
to any parsing code. Fixes bug #555257 and playback of files
created by Gnome Subtitles.
Original commit message from CVS:
* gst/audiotestsrc/gstaudiotestsrc.c:
(gst_audio_test_src_class_init), (gst_audio_test_src_init),
(gst_audio_test_src_src_fixate), (gst_audio_test_src_setcaps),
(gst_audio_test_src_start), (gst_audio_test_src_stop),
(gst_audio_test_src_do_seek), (gst_audio_test_src_check_get_range),
(gst_audio_test_src_create):
* gst/audiotestsrc/gstaudiotestsrc.h:
Define the default property values in the usual place.
Implement start/stop to reset values correctly.
Calculate the sample size only once when we negotiate.
Rename some values to make more sense.
Keep track of our byte range.
Add support for pull based scheduling. Disabled for now until we have
the whole stack working.
Set the BUFFER_OFFSET correctly.
Original commit message from CVS:
Based on a patch by: xavierb at gmail dot com
* gst/subparse/gstsubparse.c:
(gst_sub_parse_data_format_autodetect):
* tests/check/elements/subparse.c: (GST_START_TEST):
Make the detection of the used subtitle a bit less strict
for srt subtitles. Fixes bug #555607.
Original commit message from CVS:
* gst/playback/gstdecodebin2.c: (gst_decode_pad_activate):
Remove bogus assert, the decodepad could have been created inside an
already existing group.
Original commit message from CVS:
2008-10-08 Andy Wingo <wingo@pobox.com>
* gst/playback/gstdecodebin2.c (expose_pad): Fix typo: unset
target instead of setting it.
(gst_decode_pad_activate, gst_decode_pad_unblock): This is now the
API for a decode pad. The bugfix is that we set the group in
activate(), not when the pad was created because it might be NULL
then.
(gst_decode_group_control_source_pad, gst_decode_group_expose):
Update to use the API.
Original commit message from CVS:
2008-10-08 Andy Wingo <wingo@pobox.com>
* gst/playback/gstdecodebin2.c (struct _GstDecodePad): Change to
be a subclass of GstGhostPad.
(analyze_new_pad): So, when emitting the signals that determine
how we do autoplugging, already create the ghost pad and use it as
the pad in the signal arguments. This allows applications to make
a connection between the pad passed in e.g. autoplug-continue, and
the pad passed in new-decoded-pad.
(connect_pad, expose_pad): Update to receive the ghosted decode
pad in the args, retargetting it as necessary if we have to plug
the target pad through a multiqueue.
(gst_decode_group_control_source_pad): Adapt to receive an
already-ghosted pad that just needs activation, blocking, and
drain notification.
(sort_end_pads): Adapt for decode pads actually being pads.
(gst_decode_group_expose): Adapt for decode pads actually being
pads. Rewrite the decode pad names so they appear in order. Adds a
new error case if we couldn't set the name.
(gst_decode_group_free, gst_decode_group_hide): Adapt cleanup
logic.
(gst_decode_pad_set_blocked, gst_decode_pad_add_drained_check):
New API for the decode pad, needed because we shouldn't do these
things inside gst_decode_pad_new(), but after.
(gst_decode_pad_new): Change to actually make the real pad, and
delay the blocking/drainage bits.
Original commit message from CVS:
* gst/audioconvert/audioconvert.c: (audio_convert_convert):
Prevent overflows with big buffer when calculating the size of
the intermediate buffer by using gst_util_uint64_scale() instead of
plain arithmetics. Fixes bug #552801.
Original commit message from CVS:
* gst-libs/gst/pbutils/descriptions.c:
* gst/typefind/gsttypefindfunctions.c:
Recognise Kate subtitle streams (#550582).
Original commit message from CVS:
* gst/typefind/gsttypefindfunctions.c: (plugin_init):
Typefind video/mj2 and image/jp2 ISO JPEG2000 mime types.
Fixes#550638.
Original commit message from CVS:
* configure.ac:
* gst/subparse/Makefile.am:
* gst/subparse/gstsubparse.c:
* gst/subparse/samiparse.c:
* tests/check/elements/subparse.c:
Rework last change, so that we build subparse, but just disable the
sami parse functionality, if we're configured to not use xml. In the
tests only the sami test is disabled now.
Original commit message from CVS:
Patch by: Jonathan Matthew <notverysmart gmail com>
* gst/typefind/gsttypefindfunctions.c: (plugin_init):
Add typefinder for PDF documents (which is nice to have, since it's a
common format, but also helps prevent false positives). Fixes#549814.
Original commit message from CVS:
* gst/playback/gstplaybin2.c: (selector_blocked), (pad_added_cb),
(no_more_pads_cb):
Fix nasty race where multiple decodebins could start pushing data before
we manage to configure the sinks, resulting in not-linked errors in
typical RTSP streaming cases.
Original commit message from CVS:
* gst/typefind/gsttypefindfunctions.c: DV typefinding. Remove
check for a bit that is 0 in IEC 61384, but not SMPTE 314M.
Fixes#548065.
Original commit message from CVS:
2008-08-04 Andy Wingo <wingo@pobox.com>
* gst/audiotestsrc/gstaudiotestsrc.c: Very crucial and important
documentation fix.
Original commit message from CVS:
* gst/adder/gstadder.c:
Cleanup lots of empty lines that came from gst-indent going havoc
before I added the INDENT_ON/OFF marker some time agao.
Original commit message from CVS:
* gst/videotestsrc/gstvideotestsrc.c: (gst_video_test_src_getcaps),
(gst_video_test_src_create):
Discard buffers of the wrong size after renegotiation, this is perfectly
possible with things like capsfilter that could suggest caps changes
upstream without knowing the size of the buffer.
Original commit message from CVS:
* gst/playback/gstplaybasebin.c:
Fix property doc markup (its not a signal).
* sys/xvimage/xvimagesink.c:
Add since tag for new proeprties (also add sice tags fro the last two
other additions).
Original commit message from CVS:
* gst/typefind/gsttypefindfunctions.c: (celt_type_find),
(plugin_init):
Add simple typefinder for the CELT codec (www.celt-codec.org).
Original commit message from CVS:
* gst/audioconvert/audioconvert.h:
* gst/audioconvert/gstaudioquantize.c:
(gst_audio_quantize_setup_dither),
(gst_audio_quantize_free_dither):
* gst/audioconvert/gstfastrandom.h:
Implement a linear congruential generator as pseudo random number
generator for the dither noise. This is about 2 times faster than
using GLib's mersenne twister. Also this uses only integer math for
generating integers while GLib internally uses floating point math.
Original commit message from CVS:
* gst/audiotestsrc/gstaudiotestsrc.c:
* gst/audiotestsrc/gstaudiotestsrc.h:
Add 'ticks', a 1/30 second sine wave pulse every second.
Original commit message from CVS:
* gst/playback/gstplaybasebin.c:
* gst/playback/gstplaybasebin.h:
* gst/playback/gstplaybin.c:
* gst/playback/gststreamselector.c:
First stab at integrating DVD subpicture overlay into
playbin. Successfully plugs and plays, but the queues need
shrinking - 3 seconds of video is too much buffering.
Original commit message from CVS:
* gst/playback/gstdecodebin.c: (add_raw_queue):
And ref the pad before returning it again when linking to the queue
failed. Otherwise we will unref the pad twice later and things break.
Original commit message from CVS:
* gst/playback/gstdecodebin.c: (add_raw_queue):
If linking the raw pad with a queue fails, try it without a queue
instead of failing completely. This should never happen.
Original commit message from CVS:
Patch by: Evgeniy Stepanov <eugeni dot stepanov at gmail dot com>
* gst/playback/gstdecodebin.c: (add_raw_queue), (close_pad_link):
Add a queue after a demuxer if the demuxer outputs raw data. This was
done before only for non-raw data but is required in this case too.
Fixes bug #540215.
decodebin2 doesn't have this issue because all streams of a group
go through multiqueue.
Original commit message from CVS:
* gst/ffmpegcolorspace/gstffmpegcodecmap.c:
(gst_ffmpeg_pixfmt_to_caps):
* gst/ffmpegcolorspace/gstffmpegcolorspace.c:
(gst_ffmpegcsp_get_unit_size):
Only set/get on the PAL8 format, ffmpegcolorspace doesn't support
it on other formats. Also adjust the unit size only for that format
to not include the palette. Fixes bug #540497.
Original commit message from CVS:
* gst/playback/gstplay-marshal.list:
* gst/playback/gstplaybin2.c:
Add get-video-pad, get-audio-pad, get-text-pad action signals to
playbin2. This allows the user to get to the selector's sinkpads, and
thus inspect a range of things - caps, tags, etc.
Original commit message from CVS:
* gst/playback/gstplaybin2.c:
* gst/playback/gstplaysink.c:
Fix a whole bunch of typos in comments and log statements.
Original commit message from CVS:
* gst/playback/gstdecodebin2.c:
Ensure decodebin2 emits 'drained' signal once, and only once, when all
pads are drained.
Original commit message from CVS:
apparently it's an error to specify nc -l -p 3000 - though the short usage
does not make it very clear that you can drop the host arg with -l
Original commit message from CVS:
* gst/playback/gstplaybin2.c: (gst_play_bin_get_property),
(notify_source), (activate_group):
Implement the source property, emit notify when it changes in the
underlying uridecodebin.
Original commit message from CVS:
Patch by: Antoine Tremblay <hexa00 at gmail dot com>
* gst/gdp/gstgdppay.c: (gst_gdp_pay_reset):
Fix a buffer memleak and remove a confusing and wrong debug output.
Fixes bug #538663.
Original commit message from CVS:
* gst/playback/gstplaybasebin.c:
Disconnect signals from decodebins we created before we remove it from
playbin, to avoid crashes if the decodebin is eventually disposed after
the playbin itself (possible if the app takes a reference on the
decodebin).
Fixes#536521.
Original commit message from CVS:
* gst/typefind/gsttypefindfunctions.c: (aac_type_find),
(mp3_type_find), (musepack_type_find), (MULTIPART_MAX_HEADER_SIZE),
(mpeg_sys_type_find), (mpeg_ts_type_find), (mpeg4_video_type_find),
(h264_video_type_find), (mpeg_video_stream_type_find),
(dv_type_find), (mmsh_type_find):
Bunch of small clean-ups: use gst_type_find_suggest_simple(); don't
copy caps for no good reason (this may be desirable to make it easier
to detect leaks, but then it should probably be done for all caps
in the typefinder somewhere).
Original commit message from CVS:
Patch by: Antoine Tremblay <hexa00 at gmail dot com>
* gst/gdp/gstgdppay.c: (gst_gdp_pay_reset_streamheader):
Don't set caps on the buffers that contain a copy of the buffer
including the caps of them resulting in an always increasing refcount
of the caps and insanely large caps. Instead include a buffer without
caps in the new caps. Fixes bug #536475.
Original commit message from CVS:
* gst/videoscale/gstvideoscale.c: (gst_video_scale_transform_caps):
Transform a given PAR to a range on the struct with the generic
height/width instead of the struct with the possibly restricted
height/width.
Original commit message from CVS:
* gst/videoscale/gstvideoscale.c: (gst_video_scale_transform_caps):
Prefer the given format if it contains something stricter than [1,MAX]
for height or width and only put a structure that requires rescaling
as second. This makes it possible to use videoscale in pipelines where
the source can actually produce the wanted height/width but usually
selects a different one from the requested.
Original commit message from CVS:
* gst/adder/gstadder.c: (gst_adder_query_duration),
(gst_adder_query_latency):
When using gst_element_iterate_pads() one has to unref every pad
after usage.
Original commit message from CVS:
* gst/audioconvert/gstaudioconvert.c:
(structure_has_fixed_channel_positions),
(gst_audio_convert_transform_caps):
Allow up to 11 positioned channels now that audioconvert can handle
this but add no default positions for > 8 channels.
* tests/check/elements/audioconvert.c: (GST_START_TEST):
Add some unit tests for the above change: Test conversion of
11 positioned channels to stereo and the other way around, test
conversion of 15 unpositioned channels in different ways.
Original commit message from CVS:
* gst/audioconvert/gstchannelmix.c:
(gst_channel_mix_fill_one_other):
If mixing left or right to center (or the other way around) only take
the complete value if we don't already have the original position in
the source.
Original commit message from CVS:
* gst-libs/gst/audio/multichannel.c:
(gst_audio_check_channel_positions),
(gst_audio_set_structure_channel_positions_list),
(gst_audio_fixate_channel_positions):
Allow rear center together with rear left/right and other previously
conflicting channel positions. The reason why they weren't allowed
was the channel mixing implementation in audioconvert.
Also take this into account when fixing channel layouts.
Allow setting channel positions for 1/2 channels when using
gst_audio_set_structure_channel_position().
* gst/audioconvert/gstchannelmix.c:
(gst_channel_mix_fill_compatible), (gst_channel_mix_detect_pos),
(gst_channel_mix_fill_one_other), (gst_channel_mix_fill_others),
(gst_channel_mix_fill_special), (gst_channel_mix_fill_matrix):
Major rewrite of the channel mixing.
We now allow previously conflicting channel positions to appear
together (rear center and rear left/right for example).
Fixes bug #533817.
Rework the way channels are mixed together to take more possible
channel positions into account, properly mix from/to side channels
and don't assume that either center, left&right or nothing of a
specific position is available anymore.
* tests/check/elements/audioconvert.c: (GST_START_TEST):
Adjust unit tests with non-standard 1/2 channel layouts to the more
correct new behaviour.
Add a unit test for 5.1->Stereo downmixing.
Original commit message from CVS:
Patch by: Mark Nauwelaerts <manauw at skynet be>
* gst/videorate/gstvideorate.c: (gst_video_rate_reset),
(gst_video_rate_flush_prev), (gst_video_rate_event),
(gst_video_rate_chain):
* gst/videorate/gstvideorate.h:
React (more) to NEWSEGMENT
Small adjustment in timestamp calculation to prevent mismatches
Fixes#435633.
Original commit message from CVS:
* gst/adder/gstadder.c: (gst_adder_query_duration):
Correctly resync the iterator if gst_iterator_next() returns
GST_ITERATOR_RESYNC.
Original commit message from CVS:
* gst/playback/gstdecodebin2.c:
(gst_decode_group_control_source_pad), (gst_decode_group_expose):
Check for NULL cases and log them, creating ghostpads can, for example,
fail when the pad returns wrong caps.
* gst/playback/gstplaybin2.c: (perform_eos):
When pushing out the EOS event, collect the return value and warn when
something failed.
