When switching from a raw stream to an encoded stream we need to make sure the
slot is unlinked, there is code in place for this but it wasn't triggered
because the slot being reconfigured wasn't advertised as linked beforehand.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5126>
Do not attempt to send a streams-selected message when reassigning
an output slot in case upstream signalled that it is handling stream selection.
In this case decodebin3 doesn't keep track of stream
collections (`dbin->collection` is NULL).
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5059>
Setting the input field on the empty slot prevents future linking of it and will
result in flow errors later on.
This was observed in WebKit's MediaStream source element, when it changes the
caps on one of its associated streams, from an encoded format to a raw video
format. The associated stream-id on the sticky stream-start event doesn´t
change, but the element creates a new GstStream with a different ID and sets it
on the stream-start event. Stream parsing is disabled in urisourcebin, so
decodebin3 handles the parsing. Without this patch we would end-up with unlinked
pads in decodebin3 after switching to the raw video format.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5048>
This is a small optimization and avoids restarting the next parsing
iteration on already accepted data.
On its own it would also fix ZDI-CAN-20968 (see previous commit) but the
previous commit independently is also a valid fix for it.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4895>
Add support for generation of 10/12/14/16 bit bayer test pattern.
The implementation is rather simplistic, just take the ARGB
input, generate 16-bit data out of it instead of 8-bit, shift
them as required by the output bitness, and apply endian swap.
Example usage:
```
$ gst-launch-1.0 videotestsrc ! \
video/x-bayer,width=512,height=512,format=bggr12le ! \
bayer2rgb ! \
video/x-raw,format=RGBA64_LE ! \
videoconvert ! \
autovideosink
```
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4686>
If the GST_MESSAGE_SRC of error message belongs to candidate decoders,
filter the error message and don't forward it as there might be a
following candidate decoder that can be used.
If the GST_MESSAGE_SRC of error message belongs to candidate decoders,
store the latency message and handle it after decoder is accepted.
This is to avoid the selection lock failure if decodebin3 needs to
handle latency message for candidate decoders when sending sticky event.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4677>
Send sticky events to the new created decoder after it switches
to PAUSED state. It it fails, just skip this decoder and try the
next one until finding one that works. Otherwise remove this
failing stream after trying all decoders and no one can work.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4677>
Generating the source element is done when urisourcebin is doing the READY to
PAUSED state change, so it is reasonable to set the new source element to that
state.
This also allows detecting early failures with backing libraries or
hardware (checks done in NULL->READY).
Finally it makes more sense to have an element in READY when attempting to query
information from it (such as SCHEDULING queries or probing live-ness).
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3856>
self->eos was never reset after streamsynchronizer has sent EOS
(except on explicit flush or switching back to PAUSED).
As a result, synchronization was broken if new streams were pushed later
as gst_stream_synchronizer_wait() does not wait if self->eos is set.
Fix this by reseting self->eos on STREAM_START as that means a new
stream is being sent upstream and so a new EOS will follow later on.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4749>
While decodebin3 could handle changes in inputs (ex: changing codecs), there was
still one limitation which was when changing between sources which had
non-intersecting stream types (ex: switching from a video-only source to a
audio-only source). While the decoder *could* change to the proper codec ... it
would carry on using a `DecodebinOutputStream` associated to that stream
type (and therefore with pads with the wrong name).
In order to handle this:
* We notify the `MultiQueueSlot` of the change in `GstStreamType` if it already
had an associated inputstream (ex: the one associated with the static sink
pad)
* We detect such changes on the output of multiqueue as soon as
possible (i.e. when we get the GST_EVENT_STREAM_START for the new stream type)
by discarding the associated output.
Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1669
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4703>
When reconfigure_output_stream entry missing decoder path,
requested_selection should been update with what is really
active/selected immdiately with SELECTION_LOCK hold. So
use an optional message return from reconfigure_output_stream
and post it after release SELECTION_LOCK. This can make sure
other thread call to check_slot_reconfiguration will got
a correct requested_selection.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4599>
decodebin3 will do its best to figure out whether a parsebin is required to
process the incoming stream.
The problem is that for push-based stream it could happen that the stream would
not provide any caps, resulting in nothing being linked internally.
Furthermore, there is the possibility that a stream *with* caps would not be
using a TIME segment, which is required for multiqueue to properly work.
In order to fix those two issues, we force the usage of parsebin on push-based
streams:
* When the pad is linked, if upstream can't provide any caps
* When we get a non-TIME segment
Fixes#2521
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4492>
Fix compiler warnings about not using the return value when
freeing the GString segment with g_string_free(.., FALSE):
ignoring return value of ‘g_string_free_and_steal’ declared with attribute ‘warn_unused_result’
which we get with newer GLib versions. These were all harmless.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4273>
This is a follow-up of the previous commit that enabled support for redirection.
The problem is that the urisourcebin that emitted the error redirection never
produced any pads, and therefore was never linked to decodebin3. This resulted
in the code waiting for that (output) item to finally switch over ... which will
never happen.
The fix is done by removing it early if it was never connected to decodebin3.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4252>
The goal of parsebin is to figure out which elements to link together in order
to provide elementary streams given any random input.
The problem is that deciding whether a given stream should still have more
elements plugged in or not was dependent on ... the presence of compatible
decoders (sic).
Instead of that, if we can't plug anymore elements on a given stream *and* it is
detected as being an elementary stream, expose it.
Fixes#2118
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4231>
If sticky events are present on parsebin source pads, we propagate them to the
multiqueue source pads. Those will be propagated on the new urisourcebin source
pads like in the other code paths.
This ensures that STREAM_START event are present on new source pads. If CAPS
event are also present (not guaranteed), they will also be available.
Fixes#2384
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4203>
