If vaapisink received a caps query before getting a VA display, it returned
only the surfaces related caps. This behavior broke the autovideosink
negotiation.
This patch returns the pad's template caps if no VA display, otherwise the
caps are crafted as before.
https://bugzilla.gnome.org/show_bug.cgi?id=767699
In bug 757598 was added the set_context() vmethod chain up in
GstVaapiPluginBase. But it is buggy, since the parent_class address is
assigned to the last element which called gst_vaapi_plugin_base_class_init().
No error has shown up since none of the element's base classes redefined
set_context() vmethod from GstElement, so always the correct function was
called. Still this code is wrong and this patch make it right.
Since set_context() is the same code, a macro is used to implement that code
in all the gst-vaapi elements.
https://bugzilla.gnome.org/show_bug.cgi?id=765368
There is no difference in VAAPI surface caps between encoders and decoders.
Thus, the patch makes a simplification by removing encoders specific caps and
shares the same definition of VAAPI surfaces caps for all the elements.
The P010 video format is the native format used by the vaapi intel driver
for HEVCMain10 decode . Add support for planes and images of this video format.
https://bugzilla.gnome.org/show_bug.cgi?id=759181
As gstreamer-vaapi now only supports from GStreamer 1.6, this patch removes
all the old GStreamer version guards.
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
When gst_vaapi_plugin_base_get_input_buffer() fail to copy the input buffer
into a VAAPI buffer, the return value is GST_FLOW_NOT_SUPPORTED, and it was
ignored by the vaapisink, leading to a segmentation fault.
This patch ignores the frame that generated the GST_FLOW_NOT_SUPPORTED
returned by gst_vaapi_plugin_base_get_input_buffer(), avoiding the
segmentation fault, but doing and effort to continue rendering. This is
the same behavior of ximagesink.
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
https://bugzilla.gnome.org/show_bug.cgi?id=759332
Caps query can happen before the element has a bus. The display creation should
be should occur on the context negotiation, when the bus is already configured.
Then at caps query no display should be created.
Instead of force the display creation, we graciously fail the allowed_caps()
creation.
This change only applies for vaapidecode and vaapisink. The vaapipostroc, as a
basetransform descendant, seems to be not affected by this, nor the encoders.
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
https://bugzilla.gnome.org/show_bug.cgi?id=757598
The current context query handling design is flawed: the function
gst_vaapi_reply_to_query() returns FALSE either if the query is not a
GST_CONTEXT_QUERY of if the query could not be handled correctly. But the
pad query function should handle differently each case.
This patch changes the gst_vaapi_reply_to_query() for
gst_vaapi_handle_context_query() and changes it usage in all the vaapi plugins
to match the correct context query handling.
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
https://bugzilla.gnome.org/show_bug.cgi?id=757598
Refactor the main vaapi caps strings into three macros:
GST_VAAPI_MAKE_SURFACE_CAPS, GST_VAAPI_MAKE_ENC_SURFACE_CAPS and
GST_VAAPI_MAKE_GLTEXUPLOAD_CAPS.
Those are in gstvaapipluginutil.h so all the elements could use them, instead
of re-declaring them every time.
No functional changes.
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
Working on bug #744042 I realized that the gstvaapiuploader is practically not
used.
This patch removes the gstvaapiuploader and add the method
gst_vaapi_plugin_base_get_allowed_raw_caps () that returns the raw caps that
the system can handle, which is used by vaapisink and vaapipostproc.
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
https://bugzilla.gnome.org/show_bug.cgi?id=752777
vaapisink takes the display lock, then does a gst_buffer_replace which can
take the lock on the gst_vaapi_video_pool.
vaapipostproc asks the gst_vaapi_video_pool for a new surface. This takes
the lock on the gst_vaapi_video_pool; if you're unlucky, there are no free
surfaces, which means that gst_vaapi_surface_create is
called. gst_vaapi_surface_create takes the display lock.
If vaapisink and vaapipostproc are in different threads, and this happens,
you get a deadlock. vaapisink holds the display lock, and wants the
gst_vaapi_video_pool lock. vaapipostproc holds the gst_vaapi_video_pool lock
and wants the display lock.
Work around this by releasing the display lock in vaapisink around the
gst_buffer_replace.
https://bugzilla.gnome.org/show_bug.cgi?id=738249
Signed-off-by: Simon Farnsworth <simon.farnsworth@onelan.co.uk>
Signed-off-by: Sreerenj Balachandran <sreerenj.balachandran@intel.com>
This patch enhance the code path when an error is found when rendering a
buffer.
If the video meta doesn't contain a surface proxy or a surface, a warning
message is printed.
If the rendering backend fails, a error message is posted in the bus.
https://bugzilla.gnome.org/show_bug.cgi?id=749382
This fixes the regression introduced in 64acc74.
If a pad supports multiple set of capsfeatures, it needs to add
multiple equal structures with different feature sets to the caps.
Because caps structures with the same name but with a non-equal
set of caps features are not compatible.
Without this patch, playbin will autoplug xvimagesink instead of vaapisink.
https://bugzilla.gnome.org/show_bug.cgi?id=750095
Otherwise wl_display_dispatch_queue() might prevent the pipeline from
shutting down. This can happen e.g. if the wayland compositor exits while
the pipeline is running.
Changes:
* renamed unlock()/unlock_stop() to unblock()/unblock_cancel() in gstvaapiwindow
* splitted the patch removing wl_display_dispatch_queue()
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
https://bugzilla.gnome.org/show_bug.cgi?id=747492https://bugzilla.gnome.org/show_bug.cgi?id=749078
vaapisink inherits from GstVideoSink, in order to use its functionality (such
as ::show-preroll-frame property), we should use its vmethod show_frame(),
rather than call ourselves render() and preroll().
This patch adds the signal ::handoff and the property signal-handoffs. If the
property is set TRUE, the signal ::handoff is emitted just after the buffer is
rendered.
Based on Zhao Halley <halley.zhao@intel.com>
https://bugzilla.gnome.org/show_bug.cgi?id=747905
The support for GStreamer 1.0 has been obsoleted in 0.5.10 release.
GStreamer 1.2 is the a minimal requirement for building the gstreamer-vaapi.
This patch removes all the pre-processor conditional code compilation guarded
for gstreamer-1.0.
Thus, all the video converters were removed too.
https://bugzilla.gnome.org/show_bug.cgi?id=745728
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Signed-off-by: Sreerenj Balachandran <sreerenj.balachandran@intel.com>
The purpose of gstcompat.h is to couple the API differences among
gstreamer-1.0 and gstreamer-0.10. Since gstreamer-0.10 is obsolete, the code
in this compatibility layer shall be removed.
Nevertheless, the gstcompat.h header should be kept, if new incompatibilites
appear in the future, but it shall live in gst/vaapi, not in gst-libs.
This patch removes the crumbs defined gstcompat.h and moves it to gst/vaapi.
In order to avoid layer violations, gstcompat.h includes sysdeps.h and all
the includes in gst/vaapi of sysdeps.h are replaced with gstcompat.h
https://bugzilla.gnome.org/show_bug.cgi?id=745728
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Signed-off-by: Sreerenj Balachandran <sreerenj.balachandran@intel.com>
The gst_video_colorimetry_to_string() function returns a newly created
string that represents the GstVideoColorimetry value. So, that needs
to be released after usage, in e.g. GST_DEBUG().
Fix arguments to XkbKeycodeToKeysym() for converting an X11 keycode
to a KeySym. In particular, there is no such Window argument. Also
make sure to check for, and use, the correct <X11/XKBlib.h> header
where that new function is defined. Otherwise, default to the older
XKeycodeToKeysym() function.
Really use the motion event coordinates to propagate the "mouse-move"
event to upper layer, instead of those from a button event. Those are
technically the same though.
Simplify the creation and installation process of properties, by first
accumulating them into a g_properties[] array, and next calling into
g_object_class_install_properties().
Also add missing docs and flags to some properties.
Move code around in a more logical way. Introduce GST_VAAPISINK_CAST()
helper macro and use it wherever we know the object is a GstBaseSink or
any base class. Drop explicit initializers for values that have defaults
set to zero.
Introduce new backends vtable so that to have clean separation between
display dependent code and common base code. That's a "soft" separation,
we don't really need dedicated objects.
https://bugzilla.gnome.org/show_bug.cgi?id=722248
Support for X11 "synchronous" mode was never implemented, and was only
to be useful for debugging. Drop that altogether, that's not going to
be useful in practice.
https://bugzilla.gnome.org/show_bug.cgi?id=733985
Rendering with GLX in vaapisink is kind of useless nowadays, including
OpenGL related fancy effects. Plain VA/GLX interfaces are also getting
deprecated in favor of EGL, or more direct buffer sharing with actual
GL textures.
Should testing of interop with GLX be needed, one could still be using
the modern cluttersink or glimagesink elements.
https://bugzilla.gnome.org/show_bug.cgi?id=733984
Allow dynamic changes to the window, e.g. performed by the user, and
make sure to refresh its contents, while preserving aspect ratio.
In practice, Expose and ConfigureNotify events are tracked in X11
display mode by default. This occurs in a separte event thread, and
this is similar to what xvimagesink does. Any of those events will
trigger a reconfiguration of the window "soft" size, subsequently
the render-rect when necessary, and finally _expose() the result.
The default of handle_events=true can be changed programatically via
gst_x_overlay_handle_events().
Thanks to Fabrice Bellet for rebasing the patch.
https://bugzilla.gnome.org/show_bug.cgi?id=711478
[dropped XInitThreads(), cleaned up the code a little]
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Now that we always track the currently active video buffer, it is
not necessary to automatically increase its reference since this is
implicitly performed in ::show_frame() through the get_input_buffer()
helper from GstVaapiPluginBase class.
This is a regression from a26df80.
If a multiview stream is decoded, multiple view components are submitted
as is downstream. It is the responsibility of the sink element to display
the required view components. By default, always select the frame buffer
that matches the view-id of the very first frame to be displayed.
However, introduce a "view-id" property to allow the selection of a
specific view component of interest to display.
Always record the VA surface that is currently being rendered, no matter
the fact we are using texturedblit or overlay. That's because in some
occasions, we need to refresh or resize the displayed contents based on
new events. e.g. user-resized window.
Besides, it's simpler to track the last video buffer in GstVaapiSink than
through the base sink "last-sample".
Add a "display-name" property to vaapisink so that the end user could
select the desired output. Keep "display-name" in-line with the existing
"display" (GstVaapiDisplayXXX type).
So, for X11 or GLX, the "display-name" is the usual display name as we
know for XOpenDisplay(); for Wayland, the "display-name" is the name used
for wl_display_connect(); and for DRM, the "display-name" is actually the
DRI device name.
https://bugzilla.gnome.org/show_bug.cgi?id=722247
Force early initializatin of the GstVaapiDisplay so that to make sure
that the sink element display object is presented first to upstream
elements, as it will be correctly featuring the requested display type
by the user.
Otherwise, we might end up in situations where a VA/X11 display is
initialized in vaapidecode, then we try VA/DRM display in vaapisink
(as requested by the "display" property), but this would cause a failure
because we cannot acquire a DRM display that was previously acquired
through another backend (e.g. VA/X11).
