Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
* gst/gst.c: (gst_segtrap_is_enabled), (gst_segtrap_set_enabled):
* gst/gst.h:
* gst/gstplugin.c: (_gst_plugin_fault_handler_restore):
Add two functions to check and change the SIGSEGV behaviour
when loading plugins.
Don't mess with the SIGSEGV handler when we were told not to.
Fixes#347794.
API: gst_segtrap_is_enabled
API: gst_segtrap_set_enabled
Original commit message from CVS:
* libs/gst/base/gstbasesrc.c: (gst_base_src_update_length):
* tests/check/elements/filesrc.c: (GST_START_TEST):
Revert fix for regression in #347408 after release.
Original commit message from CVS:
Patch by: Antoine Tremblay <hexa00 at gmail com>
* gst/gstutils.c: (gst_element_unlink):
Free iterator when done (#347311).
* tests/check/gst/gstutils.c: (GST_START_TEST), (gst_utils_suite):
And add a test case for this.
Original commit message from CVS:
* libs/gst/dataprotocol/dataprotocol.c:
(gst_dp_event_from_packet_1_0):
Fixes#347337: failure to deserialize event packets with
empty payload (only event type)
Original commit message from CVS:
* gst/gstghostpad.c: (gst_proxy_pad_set_target_unlocked):
GhostPad no longer implicitely use the padtemplates of the targets.
Fixes#347384
Original commit message from CVS:
* gst/gstvalue.c: (gst_value_compare_list),
(gst_value_compare_array), (_gst_value_initialize):
* tests/check/gst/gstvalue.c: (GST_START_TEST):
Make GstValueArray comparison be order dependent as designed.
Add checks for value lists and value array comparisons.
Fixes#347221
Original commit message from CVS:
* gst/gstbin.c: (activate_pads),
(iterator_activate_fold_with_resync), (gst_bin_src_pads_activate),
(gst_bin_change_state_func):
(de)activate src pads before calling state_change on the childs.
This is to avoid the case where a src ghostpad is blocked (holding the
stream lock), which would block the deactivation of the ghostpad's
target pad.
* gst/gstghostpad.c: (gst_proxy_pad_do_query_type),
(gst_proxy_pad_do_event), (gst_proxy_pad_do_query),
(gst_proxy_pad_do_internal_link), (gst_proxy_pad_do_bufferalloc),
(gst_proxy_pad_do_chain), (gst_proxy_pad_do_getrange),
(gst_proxy_pad_do_checkgetrange), (gst_proxy_pad_do_getcaps),
(gst_proxy_pad_do_acceptcaps), (gst_proxy_pad_do_fixatecaps),
(gst_proxy_pad_do_setcaps), (gst_proxy_pad_set_target_unlocked),
(gst_proxy_pad_set_target), (gst_proxy_pad_get_internal),
(gst_proxy_pad_dispose), (gst_proxy_pad_init),
(gst_ghost_pad_parent_set), (gst_ghost_pad_parent_unset),
(gst_ghost_pad_class_init),
(gst_ghost_pad_internal_do_activate_push),
(gst_ghost_pad_internal_do_activate_pull),
(gst_ghost_pad_do_activate_push), (gst_ghost_pad_do_activate_pull),
(gst_ghost_pad_do_link), (gst_ghost_pad_do_unlink),
(gst_ghost_pad_dispose), (gst_ghost_pad_new_no_target),
(gst_ghost_pad_new), (gst_ghost_pad_set_target):
GhostPads now create their internal GstProxyPad at creation (and not
when they're linked, as it was being done previously).
The internal and target pads are linked straight away.
The data will also travel through the other pad in order to make
pad blocking and probes non-hackish (the probe/block now really happens
on the GhostPad and not on the target).
* gst/gstpad.c: (gst_pad_set_blocked_async),
(gst_pad_link_prepare), (gst_pad_push_event):
Remove previous ghostpad cruft.
* gst/gstutils.c: (gst_pad_add_data_probe),
(gst_pad_add_event_probe), (gst_pad_add_buffer_probe),
(gst_pad_remove_data_probe), (gst_pad_remove_event_probe),
(gst_pad_remove_buffer_probe):
Remove previous ghost pad cruft.
Added more detailed debug statements.
* tests/check/gst/gstghostpad.c: (GST_START_TEST):
Fix the testsuite for refcounting changes.
The comments about who has references were correct, but the refcount
being checked wasn't the same (!?!).
Original commit message from CVS:
* gst/Makefile.am:
* gst/gstconfig.h.in:
* win32/common/config.h:
Fix build when disabling tracing (fixes#344016). Also start to document
the defines that disable the sub-systems.
Original commit message from CVS:
* gst/gstelement.c: (activate_pads),
(iterator_activate_fold_with_resync), (gst_element_pads_activate):
Better pad activation code: Reset the collect value too on resync.
Add some comments.
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_init), (gst_pad_activate_pull),
(gst_pad_activate_push):
Use some more macros where it makes sense.
Allow pad mode switching instead of asserting. When a pad
is activated in one mode and we activate it in another,
deactivate it first before activating it in a different mode.
Fixes#329198.
Original commit message from CVS:
2006-07-08 Andy Wingo <wingo@pobox.com>
* tools/gst-launch.c (main): Handle err == NULL.
* gst/gst.c (init_post, ensure_current_registry)
(ensure_current_registry_forking)
(ensure_current_registry_nonforking): Reduce #ifdef ratnest by
factoring out the registry scanning into separate functions. Don't
fork for the rescan is GST_REGISTRY_FORK=no; useful in debugging.
Better environment var name/interface suggestions accepted.
Original commit message from CVS:
* gst/gstobject.c: (gst_object_set_name_default),
(gst_object_set_name):
Random micro-optimisation: don't use a hash table
with strings as keys and the usual strdup/strcmp
involved, but rather just use the GQuark of the
type name as key, since it needs to be looked up
anyway to get the type name string.
* tests/check/gst/gstobject.c: (GST_START_TEST):
Fix various leaks.
Original commit message from CVS:
* gst/gstbin.c: (compare_interface), (gst_bin_get_by_interface),
(gst_bin_iterate_all_by_interface):
Can't use GPOINTER_TO_INT and GINT_TO_POINTER with GTypes.
GTypes are gulongs and thus the top 4 bytes might be cut
off on some platforms when doing GPOINTER_TO_INT, leading
to invalid GTypes and bad things happening.
Also add a check to make sure the type passed in is really
an interface type.
Original commit message from CVS:
* Makefile.am:
* configure.ac:
* gst-element-check.m4:
* gst-element-check.m4.in:
Make gst-element-check-$VERSION.m4 call gst-inspect-$VERSION
instead of the unversioned gst-inspect (#324176, #168659).
Original commit message from CVS:
* libs/gst/base/gstbasesrc.c: (gst_base_src_class_init),
(gst_base_src_wait), (gst_base_src_update_length),
(gst_base_src_get_range), (gst_base_src_default_check_get_range),
(gst_base_src_check_get_range), (gst_base_src_pad_check_get_range),
(gst_base_src_loop), (gst_base_src_start),
(gst_base_src_activate_pull):
Update docs.
blocksize == 0 now means the default blocksize when working in push
based mode.
Remove some pointless asserts in _wait function.
Fix offset/length calculations and EOS handling. We can now pull 0
bytes as well, which is allowed.
use _check_get_range() to decide if we can operate in _pull based
mode.
Fix refcounting leak when check_get_range function was not
implemented.
API GstBaseSrc::blocksize range can be 0 too now (default)
* tests/check/elements/filesrc.c: (GST_START_TEST),
(filesrc_suite):
Added check to test _get_range() behaviour.
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_chain_unchecked), (gst_pad_chain),
(gst_pad_push), (gst_pad_check_pull_range), (gst_pad_get_range),
(gst_pad_pull_range):
* gst/gstpad.h:
Lots of comments and docs added to the pad functions.
Flesh out the expected behaviour of the get_range() functions.
Original commit message from CVS:
* win32/common/libgstbase.def:
* win32/common/libgstdataprotocol.def:
* win32/common/libsgtreamer.def:
Add new exported functions.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_preroll_object),
(gst_base_sink_loop), (gst_base_sink_get_position):
When operating in pull mode update the offset so that we
read sequentially.
Original commit message from CVS:
* gst/gstregistryxml.c: (read_string):
Avoid strdup. (will happen in libxml, but hey!)
* gst/gsturi.c:
Add some more docs.
Original commit message from CVS:
* gst/gstbuffer.c: (_gst_buffer_copy), (gst_buffer_create_sub):
* tests/check/gst/gstbuffer.c: (GST_START_TEST),
(gst_buffer_suite):
No point in checking if the size of the subbuffer > 0, the
code handles it correclty as demonstrated by unit test.
Also add a unit test for the zero sized _new_and_alloc and
_copy. Fixes#346663.
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_prepare_output_buffer),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer):
Make sure the buffer we pass to transform_ip has a refcount of
1 and thus is writable. Fixes#343196
Original commit message from CVS:
* plugins/elements/gstfilesrc.c: (gst_file_src_class_init),
(gst_file_src_init), (gst_file_src_set_property),
(gst_file_src_get_property), (gst_file_src_map_region):
* plugins/elements/gstfilesrc.h:
Add "sequential" property, off by default, to use madvise and hint
to the kernel that sequential access is desired.
Touch all retrieved pages by default to ensure they are pulled
into memory. (Closes#345720)
Original commit message from CVS:
* gst/gstcaps.c: (gst_caps_new_empty), (_gst_caps_free),
(gst_caps_unref), (gst_static_caps_get),
(gst_caps_append_structure):
* gst/gstclock.c: (gst_clock_entry_new), (_gst_clock_id_free):
Use GSlice when the glib we build against is >= 2.10
Original commit message from CVS:
Patch by: Peter Kjellerstedt <pkj at axis dot com>
* gst/gst-i18n-app.h:
* gst/gst-i18n-lib.h:
* tools/gst-inspect.c: (print_signal_info):
The attached patch will make the inclusion of gettext.h unconditional in
gst/gst-i18n-app.h and gst/gst-i18n-lib.h, and it will remove the inclusion of
libintl.h in tools/gst-inspect.c.
This allows use of --disable-nls again and fixes#344642.
Original commit message from CVS:
* gst/gstpad.c: (handle_pad_block), (gst_pad_push_event):
Implement pad blocking on events according to part-block.txt.
More comments on behaviour.
* tests/check/gst/gstevent.c: (test_event):
Send event to peer pad of blocked pad (else it will block).
Original commit message from CVS:
* libs/gst/check/gstcheck.c: (gst_check_message_error),
(gst_check_run_suite):
if we get the wrong message, give us the types as string
* plugins/elements/gstfilesrc.c: (gst_file_src_start):
Fix a translatable
* tests/check/elements/filesrc.c: (GST_START_TEST):
add a test for trying to open a non-existing file
Original commit message from CVS:
* libs/gst/check/gstcheck.h:
add some assert_ as alias for fail_unless_*
* tests/check/gst/gst.c: (GST_START_TEST), (gst_suite):
increase test coverage
Original commit message from CVS:
* configure.ac:
don't set CFLAGS and friends for gcov, done from GST_GCOV now
* tests/check/Makefile.am:
clean up gcov files
Original commit message from CVS:
* gst/gstcaps.c: (gst_caps_remove_and_get_structure):
remove gst_caps_simplify; it was not declared and not used
and deprecated in 0.8
Original commit message from CVS:
* docs/faq/gst-uninstalled:
don't put empty paths on PYTHONPATH
* docs/gst/gstreamer-sections.txt:
remove some symbols that are not there
Original commit message from CVS:
* libs/gst/dataprotocol/Makefile.am:
build dataprotocol test by linking to the lib, instead of
compiling the source, so we get coverage
* tests/check/Makefile.am:
* tests/check/elements/filesrc.c: (event_func), (setup_filesrc),
(cleanup_filesrc), (GST_START_TEST), (filesrc_suite):
add a test for filesrc
Original commit message from CVS:
* tests/check/Makefile.am:
gst-inspect every element; this makes sure that we also get
coverage on element's get/set functions
* tests/check/gst/gststructure.c: (GST_START_TEST),
(gst_structure_suite):
Push coverage from 59.04% to 70.00%